Used Buckle Folder for sale (718)

Condition: ready for operation (used), Size with continuous feeder: max 760x2000 mm min 150x180 mm Size cross fold: min 150x200 mm Size threefold: min 200x300 mm Size four fold: min 300x400 mm Speed: max 180 m/min Equipment feeder: • continuous feeder • vacutable 1st parallel folding unit: • 4 buckle plates Ljdpod N D Niofx Aftshi • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left & right standard accessories: • 1 set of operator manuals • 1set of electrical diagrams • further information: • as is, cleaned available: • immediately

Year of construction: 1997, condition: used, Built in 1997 Size max 660 x 1.020 mm Equipment feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife • polyurethane-steel folding rollers Ledpfsdmdt Uox Aftjhi delivery: • belt delivery

Condition: good (used), Rebuilt: 2011 Size: max 560 x 1.600 mm Size with flatpile feeder: max 560 x 920 mm, min 150 x 200 mm Size cross fold: min 150 x 200 mm Size threefold: min 200 x 300 mm Speed: max 180 m/min Power requirements: 3,85 kW (220/380V, 50Hz) Length with flatpile feeder: 3.440 mm Width: 1.500 mm Weight with flatpile feeder: 1.850 kg (approx.) Equipment: Feeder: • flat pile feeder • MCC-control • Vacutable • Vaculift Lsdol Dpc Espfx Aftjhi • Vacubelt • counter 1st parallel folding unit: • 6 buckle plates 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left peripheral units and deliveries: • delivery A 56

Condition: ready for operation (used), Working widths 660 mm Equipment Lheded Hgvzspfx Aftoi 2nd folding unit: • 6 buckle plates • noise prevention

Year of construction: 1989, condition: used, Palletizer 1. Folding unit: 6 folding pockets Combination folding rollers Downstream knife shaft Noise protection device 2. Folding unit: 4 folding pockets Combination folding rollers Noise protection device 3. Folding unit: Ledpsbi U Nzofx Aftshi 2 folding pockets Combination folding rollers Noise protection device

Year of construction: 1994, condition: used, Feeder: Rotary stack feeder 1st Folding Unit: 4 folding pockets Downstream knife shaft Noise reduction device 2nd Folding Unit: Lhjdpfx Afobi U Rqetei 4 folding pockets Noise reduction device Accessories: Slitting, perforating, cutting Shingle delivery

Year of construction: 2002, condition: ready for operation (used), Built in 2002 Size with continuous feeder max 660 x 1.280 mm Size cross fold min 150 x 200 mm Size threefold min 200 x 300 mm Speed max 180 m/min Length with continuous feeder 5.890 mm Width 2.340 mm Equipment: feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • noise prevention 2nd folding unit: • cross-fold knife • noise prevention 3rd folding unit: • third-fold knife Lhodpfed E Nbqsx Aftji • Lärmschutzeinrichtung peripheral units and deliveries • stream delivery with pressing station -- optionales Equipment:--not included— • gate fold buckle plate

Condition: excellent (used), functionality: fully functional, You are bidding here on: a branded machine – bending brake from a very reputable and well-known manufacturer – Schechtl. Machine features: - Schechtl MA folding/bending brake - Bends cleanly – test available - Angle indicator - Bending length: slightly over 2m - Material thickness: up to 2 mm for steel sheets; for aluminium, zinc, etc., up to approx. 3 mm - Standard rail (radius rail for aluminium and zinc is available as an optional extra, as well as attachment and special rails) - Foot switch operation - Optional back gauge possible Optional: - HT 200 guillotine shear or Schröder electric guillotine shear, 2m – 2.5 mm, can also be supplied on demand Important: Optionally, you can find and purchase a wide range of machines and accessories related to sheet metal and steel processing (such as bending brakes, guillotine shears, drilling machines, roll bending machines, slitting and profiling machines – as well as accessories like beading devices, roll sets for gutter production, rear gauges, etc.), as well as hand tools and spare parts from many leading manufacturers, directly from our shop. I am always available to answer your questions. You will receive an invoice according to §25a UstG (differential taxation); VAT is included in the invoice amount. Free loading is possible – weight approx. 1650 kg. Inspection and testing can be arranged by phone and are expressly encouraged. Payment in cash upon collection. Take advantage of our experience and technical expertise – we are happy to advise you. Lhsdpfx Afjx Ruphjtsi Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Lhsdpfx Afow T Sc Aetsi Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bending beam, max.: 90 degrees/sec Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge • Motorized lower beam adjustment and bending beam adjustment • Support table A good selection of tooling, segmented and full length

Year of construction: 2007, condition: excellent (used), RAS Turbo bend plus 62.25 New gearboxes fitted from Ras Bending length 2540mm / 2.5 metre Material thickness max 2.5mm Four extremely dynamic and fast ramp-driven movements under CNC System 6000 CNC touch screen – New control fitted in 2016 Extended back supports Light guards Portable tooling rack New / Year of manufacture 2007 Complete with: J shape back gauge Lhjdpfx Aegd Dgqeftoi Complete with segmented and straight tools and tooling rack Tooling (supplied with the machine): Standard ‘sharp’ upper tooling – 3x lengths 845mm Bottom tooling single length – 1x 2.54m length 10mm wide Bottom tooling single length – 1x 2.54m length 20mm wide Goats foot segmented upper tooling – 110 height section 200mm wide – 10 lengths 60mm – 1 length 55mm – 1 length 50mm – 1 length 45mm – 1 length 40mm – 1 length 35mm – 1 length 30mm – 1 length 120/90mm LH Box end – 1 length 120/90mm RH Box end – 1 length Segmented bottom tooling 200mm wide – 10 lengths 120mm – 2 lengths 60mm – 1 length 55mm – 1 length 50mm – 1 length 45mm – 1 length 40mm – 1 length 35mm – 1 length 30mm – 1 length Tool cart supplied

Year of construction: 2012, condition: excellent (used), Used Ras 62.25 CNC Folder Model: 62.25 Ras Year 2012 RAS 62.25 CNC folder Capacity: 2540mm x 2.5mm CNC Auto Bending Machine (Year 2012) Complete with fitted System 6000 Touch screen control (screen recently replaced) 3.2 Metre J shape back gauge Twin Foot Pedal Control MACHINE GUARD SOLUTIONS Light Guards Lhedpfxon Tnzfs Aftji Complete with segmented and straight tools

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, Used 6metre Ras up and down bend cnc folding machine for sale Lsdpjgpk R Eefx Aftohi Ras XXL Centre 75.06 System 9002 cnc control RAS TECHNICAL DATA: DIMENSION 75.06 Max. Sheet thickness (Steel 58000 PSI) gauge 16 Max. sheet thickness (Aluminium 29000 PSI) gauge >14 Max. sheet thickness (Stainless Steel 109000 PSI) gauge 18 Working length max. inch 251,97 / 6.4metre Grippers Travel Range inch 0,47 – 29,53 Grippers Positioning Accuracy inch +/- 0,004 Distance between 2 Grippers min. inch 7,09 Stops and Grippers Quantity 8 Free Space in front of the folding be-ams up to degree 300 Working Height inch 37,40 Machine Width inch 59,05 Machine Length without contori cabinet inch 257,48 Machine Height inch 70,87 Weight approx.. lbs 27 600 Compressed air bar 5,5 Drive Power Upper Beam hp 2,95 Drive Power Upper Folding Beam hp 2,95 Drive Power Lower Folding Beam hp 2,95 Speeds: Upper and Lower Folding Beam degree/s 126 Upper Beam inch/s 13,78 Grippers inch/s 13,78 Max. sheet thickness (Steel 400 N/mm2) mm 1,5 Max. sheet thickness (Stainless Steel 750 N/mm2) mm 1,25 Max. sheet thickness (Aluminium 200 N/mm2) mm 2,0 Working length max. mm 6400 Grippers Travel Range mm 12-750 Grippers Positioning Acuracy mm +/- 0,1 Distance between 2 Grippers min. mm 180 Stops and Grippers Quantity 8 Free space in front of the folding beams up to degree 300 Working Height mm 950 Machine Width mm 1500 Machine Length without control cabinet mm 6540 Machine Height mm 1800 Weight approx.. N 125 000 KG 12 500 Compressed air bar 5,5 Drive Power Upper Beam kW 2,2 Drive Power Upper Folding Beam kW 2,2 Drive Power Lower Folding Beam kW 2,2 Speeds: Upper and Lower Folding Beam degrees 126 Upper Beam mm/s 60 Grippers mm/s 350 Ideal for the manufacture of roofing products

Condition: used, Used RAS 62.30 Turbobend CNC Folder Ljdpofuakyjfx Aftshi Used RAS 62.30 Turbobend CNC Folder Year 2014 Sheet thickness 2mm, Working length 3,200mm back gauge depth 6 – 1,550mm, back gauge accuracy +/- 0.15mm, accessories

Year of construction: 2002, condition: refurbished (used), Used refurbished Salvagnini P4 panel bender / cnc folder for sale complete with sheet metal loading system Salvagnini P4 PERFORMER refurbished in 2012 for sale – Made in Austria: Specification – new / year 2002 – machine revised in 2012 Max Bending Length 1850mm Max width of finished Panel 1500mm Max Diagonal of incoming sheet 2150mm Max length of incoming blank 2000mm Max width of the blank 1500mm Max bend height 127mm Max thickness of material at 400 N/mm2 (m/s) 2mm Bending angles obtainable -125 Degree to +125 Degree Total machine hours on 23,000 Sheet metal load and unload system: Configuration ADP 2715 SAP 211618 POS P4.1812 Servo-controlled panel bender Upper Bending blade Lower Bending blade Chiller Lsdpfx Afogu Dynstjhi Used Salvagnini machines wanted and for sale, models such as: S4 –30 Auto load/unload Punching,Salvagnini P4 2512 ALA Panel Bender, Salvagnini P2 Performer Panel Bender, Salvagnini S4.30,Salvagnini P4.2512 Panel Bender,Salvagnini P4.2512,P4 2516ABA, Salvagnini P4 1712, Salvagnini P4 2112 HPT Panel bender,Salvagnini P2 Performer Panel Bender, Salvagnini P4.1712, Salvagnini P4.2516ABA Automated Panel Bending System

Year of construction: 2016, condition: excellent (used), Used modern, very clean & fully serviced RAS UpDownBend 78.40 cnc Folding System for sale 4metre up and down cnc folding machine with U shape back gauge as highlighted per photograph Ledpfxsnnz Apo Aftjhi Year 2016 Technical Data: Material Thickness max. (Mild Steel) 3.0mm Material Thickness max. (Stainless Steel) 2.0mm Material Thickness max. (Aluminium) 4.0mm Working Length 4060mm / 4metre Gauging Depth ("U" shape) 95-3270 (4150)mm Stop Finger Units (fix - telescope - fix) 2 + 10 + 2 Gauging System Accuracy -/+ 0.1mm Open Height Upper Beam max. 600mm Telescopic Gauging System (Travel Range) 640 – 1520mm Pivot Point Adjustment +/- 15mm Folding Beam Height Adjustment 150mm Folding Beam Travel Range 180 deg Working Height 1000mm Speeds: Upper Beam 75mm/s Folding Beam 110 deg/s Gauging System from min to max 2.2s

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, BOBST PHARMA 36 folding and gluing machine Year of manufacture: 2001 on plate EDIGRAPH S.A. Factory number: no nameplate Ljdpfoubztkjx Aftjhi Glue system: on the wheel - 1 pt. Pena technical documentation Machine connected, possibility of testing. Condition: very good

Condition: good (used), Year of construction: 2007, control type: manual, You are bidding here on: a branded machine - folding bench, from a very reputable and well-known manufacturer - Schechtl. Device features: - Schechtl HA folding bench - Rail bends cleanly – test possible - Degree indicator Lhjdpjytz A Eefx Aftji - Bending length approx. 310 cm - Sheet thickness: 1.5 mm for steel – more for aluminum, zinc, etc., up to 2 mm - Standard rail - Foot closing device - Sheet support - Optional roller shear with rail – see photos - 2024 price list (net) – prices are now significantly higher Important! Optionally, you can find and purchase a wide range of machines and machine accessories, such as various rails, depth stops – everything related to sheet metal and steel processing – including folding benches, guillotine shears, drilling machines, slip rolls, slitting and profiling machines, accessories (beading devices, roll sets for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers in our shop. Please don't hesitate to contact me if you have any questions. You will receive an invoice in accordance with § 25a UStG – VAT is included in the invoice amount. 2024 price list – prices have already increased noticeably. Differential taxation applies. Free loading possible – weight approx. 2,000 kg. Inspection and testing are possible and welcome by prior telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise, we are happy to advise you. Collection by the buyer themselves (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Item number: folding bench HA 310.

Condition: good (used), functionality: fully functional, Year of construction: 2013, Used swivel bending machine by Schroder Model: SPB Evo 3200 4.0 UD Capacity: 3200 x 4 mm Upward and downward bending Year of manufacture: 2013 POS 3000 CNC control (graphical) Hydraulic upper clamping CNC backgauge with 4 finger types (standard, clamping, side clamping) Lhsdeyhdz Topfx Aftei Additional lower blade

Condition: new, Year of construction: 2025, Pan & box brakes SM3-1270x2 is used for bending metal sheets up to 1270mm length and 2mm thickness. The main difference of ours bending machine from other models is segmented three bars: upper bar and bending bar segmented, and also segmented bottom bar. So it lets to bend difficult shapes elements with reverse bends. This additional third segmented bar makes bending machine more functional and lets the user to expand range of elements he can make. Pan & box brakes has pedal mechanism to make work of one operator more convenient and freer his hands while metal fixing process. In standard set pan & box brakes SM3-1270x2 goes with three segmented bars. Height of upper segments is 30mm, lifting height of upper beam is 40mm. Also in standard set with machine goes four position angle limiter to make production of same angle elements more easier and side notch segments to bend boxes with inside bends. As additional options you can get: upper segments 45mm heigh instead of 30mm; tempering of segments (30 points of hardness instead of 12 points) cross cutting knife Lhjdpfxsqxando Aftei multifunctional acceptance table to make production of same sizes elements much easier Maximum bending angle of machine is 135 degrees. Segmented bending machine SM3-1270x2 is equipped with 11 segments of different length: 400мм, 270мм, 200мм, 100мм,75мм, 50мм, 45мм, 40мм, 35мм, 30мм, 25мм so it lets to bend different sizes boxes and elements. So pan & box brakes SM3-1270x2 with three bars segmented is perfect solution for customers who makes different elements such as façade cassettes and boxes with reverse bends, companies whose field of work is ventilation elements production and air conditioning systems production, construction companies and others who work with metal sheets and produce different elements from it. To get more information about segmented bending machines we produce please contact our sales department.

Condition: used, Year of construction: 2018, operating hours: 69,000,000 h, functionality: fully functional, Folder gluer machine Folding carton with longitudinal seam: max. 1,150 × 600 mm min. 75 × 55 mm min. 45 × 55 mm (with small carton device) Crash-lock bottom carton: max. 1,150 × 600 mm min. 146 × 80 mm 4-corner box (erected): max. 1,150 × 680 mm min. 120 × 110 mm 6-corner box (erected): Lhjdpfjyg Edgex Aftei max. 1,150 × 630 mm min. 250 × 130 mm With BELKHOFF control system Roller and drying tunnel TÜNKERS EAS 480 delivery station, right-hand, year of manufacture 2019

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 20021, working width: 2,100 mm, bending angle (max.): 150 °, sheet thickness (max.): 3 mm, distance between stands: 2,450 mm, opening stroke: 160 mm, TECHNICAL DETAILS Sheet width: 2,100 mm Lhjdpsygw Haefx Aftsi Sheet thickness: 3.0 mm Frame width: 2,450 mm Opening width: 160 mm Max bending angle: 150° Backgauge - adjustable: 6.0 - 1,000 mm Control: CNC MACHINE DETAILS Total power requirement: 5.37 kW Dimensions: 3,250 x 2,450 x 2,100 mm Machine weight: approx. 3,850 kg EQUIPMENT - ERBEND 15.6" CNC control panel - Electric backgauge from 6.0 - 1,000 mm - Material support table with ball rollers - Servo motor drive - LED machine lighting - 1x 30 upper tool - radius 1.0 mm - 1x bending rail 15 mm - 1x bending rail 25 mm - Electric safety device at the front (light curtains) - Mobile foot control - Operating manual - CE declaration SPECIAL ACCESSORIES - Divided Geifu upper tool, height = 90 mm - CNC electric motorized adjustment of lower beam - Manual crowning of the bending beam

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Kl. Tail width: 5 x s Lhodpfx Afovaatfetoi Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Condition: used, sheet length: 1050width: 800heigth: 1400sheet thickness: 3 Lhjdpfxevaar Ij Aftji Bending Machine - Dimensions (L x W x H): approx. 210 cm x 80 cm x 140 cm - Working width: approx. 105 cm

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, type of input current: AC, Equipment: CE marking, type plate available, Heidelberg Diana 90 AUTOSET – Refurbished Folder Gluer / Folding Carton Gluing Machine ✅ Condition: Fully refurbished in 2024 (complete mechanical and electrical overhaul, new motors, shafts, rollers, and control electronics) ✅ Functions: Straight-line, crash-lock bottom, 4-corner box gluing ✅ Speed: up to 500 m/min ✅ Formats: Diana 45 → 48–570 mm | Diana 90 → 48–900 mm ✅ Automation: Motorized carriers, AUTOSET feature, touchscreen operation ⚙️ Advanced Features - Precision aligning module for perfect folding - Feeder and transfer sections equipped with independent drive motors - Pneumatically lifted feeder top for easy access - LPS Clamping System for rapid module setup - Glue system with LPS GP AUTO (maintains glue freshness during stops) - Drive system: IE3 motors, ABB frequency inverters, Siemens PLC control - Final fold station design inspired by Bobst Alpina 🚀 Why choose LPS Diana? ✔️ High efficiency – quick job changeovers with Autoset ✔️ Versatile – accommodates a wide range of carton types ✔️ Premium build – robust frame for stability and vibration-free operation ✔️ Remote diagnostics and service capability Ledpfxevy Efye Aftohi 🏭 Additional Machines Available from Stock We are a company specializing in full mechanical and electrical refurbishment of folder gluers (Heidelberg Diana, Bobst Alpina). We deliver machines with new modules, including our proprietary semi pick-up delivery table system. Currently available refurbished folder gluers, nearly ready for delivery: - Diana 90 Crashlock 4/6 Corner – €120,000 - Diana 90 – €100,000 - Diana 45 – €100,000 👉 All machines are fully rebuilt and include: - New shafts and bearings - New electrical cabinets with ABB and Siemens components - Comprehensive mechanical and electrical overhaul Prices are negotiable depending on configuration and customer requirements.

Condition: good (used), Year of construction: 2007, functionality: fully functional, We have a Buhrs W+D BB700 14K servo envelope inserting system available. DL up to C4 envelopes. This machine is built in 2007. Year of built 2007 6 station base Configuration: Mueller Apparatebau single sheet feeder / transactional channel Buhrs BB700 - 14K 6 station base 5 rotary feeders 1 HF3 vacuum friction feeder Divert bin Envelope station autoloader Lhjdpfxeukpime Aftei Conveyor belt This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. More and other feeders possible. Reading camera's for matching optional! Turnover module, alignment table and mailtable also available optional. Machine has just arrived and will be available shortly when it has passed through our complete maintenance program. Then the machine is 100% complete and will work like new. Please come over for a test if you like.