Used Binder-Press for sale (12,574)

Condition: ready for operation (used), For sale: a very solid and fully operational Constantin Hang 150-06, the industry standard for press-fitting and crimping ring binder mechanisms onto folders, binders, and covers. Specifications and features: • Suitable for 2-ring and 4-ring mechanisms • Powerful mechanical eccentric press • Very robust German construction (cast iron) • Foot pedal operation for safe and fast working • Complete and ready for immediate use • Machine presses and crimps the legs of the ring mechanism in a single operation • Ideal for binderies, file manufacturers, and office supply production Currently set up for 2-ring mechanisms (80 mm), but can be easily adjusted for other mechanisms. Nlodox A Ivvopfx Alnoc Technical data: • Manufacturer: Constantin Hang • Model: 150-06 • Serial number: 102160 • Country of origin: Germany Condition: Good, clean, and working condition. Can be demonstrated immediately.

Condition: used, maximum load weight: 29,900 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 04/2009, loading space volume: 45 m³, Year of construction: 2009, Equipment: ABS, * Feldbinder 3-axle tipping silo with compressor and tipping hydraulic system * Volume 45m³ Njdpjwqmddjfx Alnslc * Air suspended * Lifting axle * SAF axles * Alloy wheels * EBS * ABS

Condition: excellent (used), Incubator Type: Binder CB 210 CO² / 9140-0013 Technical data Temperature range: 7 °C above room temperature to 60 °C MB1 controller for temperature and CO2 concentration Internal volume: 210 liters External dimensions (W x H x D): 740 x 1069 x 715 mm Internal dimensions (W x H x D): 560 x 750 x 500 mm Weight: approx. 121 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Nlodezgbtcopfx Alnjc We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Here we offer a Binder incubator. Key features: Model BD 115 | Standard incubator with natural convection Technical data BD 115 External dimensions: Width (net) 835 mm Height (gross, including feet/casters) 705 mm Depth (net) 645 mm Depth (gross, including door handle and exhaust pipe) 750 mm Wall clearance (rear, minimum) 100 mm Wall clearance (side, minimum) 160 mm Exhaust pipe, outer diameter 52 mm Doors Number of doors 1 Internal dimensions: Width 600 mm Height 480 mm Depth 400 mm Internal volume 115 liters Steam space volume 142 liters Shelves Number of shelves 0 Njdpfxjzgaics Alnslc Maximum number of shelves 5 Maximum load per shelf 20 kg Permissible total load 50 kg Weight: Weight (empty) 61 kg Temperature data Temperature range: 5°C above room temperature to 100°C Temporal temperature deviation at 37°C ± 0.1 K at 50°C ± 0.1 K Spatial temperature deviation at 37°C ± 0.4 K at 50°C ± 0.8 K Heating time to 37°C 70 minutes to 50°C 90 minutes Recovery time after 30 sec door open at 37°C 10 minutes at 50°C 12 minutes Electrical data: BD115-230V IP 20 Rated voltage (+/-10%) at 50 Hz mains frequency 230 V Rated voltage (+/-10%) at 60 Hz mains frequency 230 V Type of current 1N~ Rated power 0.20 kW Type: BD 115 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum fuse rating: 16A Frequency: 50/60Hz Electrical connection power: 4.5kW Temperature range: +12°C above ambient temperature to 300°C Spatial temperature deviation at 150 °C: ± 2.0K Temporal temperature deviation at 150 °C: ± 0.6K Heating time to 150 °C: 25 min Recovery time after 30 s door opening at 150 °C: 6 min Air exchange rate at 100 °C: 5x/h Internal volume: 741 l Nlodpfsxzukkox Alnsc Maximum load per insert: 45 kg Maximum total load: 315 kg Energy consumption at 150 °C: 800 Wh/h Maximum number of inserts: 16 External dimensions: Width: 1,165 mm Height: 1,590 mm Depth: 870 mm Internal dimensions: Width: 1,000 mm Height: 1,300 mm Depth: 570 mm Important note: The wheels are installed/included.

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 1 h, type of input current: three-phase, table width: 1,000 mm, table length: 2,600 mm, total length: 2,000 mm, total width: 3,090 mm, total height: 3,600 mm, overall weight: 3,800 kg, workpiece height (max.): 60 mm, Wood gluing press 12 working fields main cylinders 12 x 3 =36 pieces ,cylinders 63 x 60 and 4 pressure side levelling 50 x 50 pieces 12 x 4 =48 pieces .Machine new invoice .Warranty one year .Press rotates with inverter controlled transmission .Press stop is on induction sensor .Or rotates smoothly .Actuation of cylinders with lever switches press field is one meter width 2,6 length 60 mm thickness . Nodpfx Alotx T Tysnslc

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: Nlsdpfx Aezg Dx Ujlnsc NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: good (used), functionality: fully functional, High-frequency press for glulam beams up to 22 meters maximum pressing width: 1300 mm maximum pressing thickness: 300 mm loading conveyor Njdjw A Hk Ijpfx Alnolc 3,000 mm press with section-by-section polymerization (3 meters each)

Condition: excellent (used), Binder MKFT 720 E3.2 Temperature and Humidity Chamber Device Data Manufacturer: Binder Type: MKFT 720 E3.2 Year of Construction: 2017 Article Number: 9020-0288 Design: Temperature and Humidity Chamber Cooling: Air-cooled Description Used temperature and humidity chamber from Binder. Suitable for temperature, climate, material, and aging tests, as well as stress tests. Application in industry, research, development, and quality assurance. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Internal volume: approx. 734 liters Max. total load: 160 kg Max. load per shelf: 40 kg Dimensions External (W x H x D): 1615 x 2005 x 1230 mm Internal (W x H x D): 1200 x 1020 x 600 mm Electrical Data 400 V / 3N~ / 50 Hz Power: 13.0 kW Current: 22.5 A Protection class: IP 20 Refrigeration System Refrigerant: R404A / R23 Stage 1: 4.00 kg Stage 2: 0.87 kg Two-stage refrigeration system Max. operating pressure: 29 bar Performance Data Temperature Temperature deviation over time: 0.1 to 0.5 K Temperature deviation spatially: 0.3 to 2.0 K Heating rate: approx. 4.8 K/min Cooling rate: approx. 4.0 K/min Heat compensation: approx. 5000 W Performance Data Climate Climate range: +10 °C to +95 °C Humidity range: 10 % to 98 % RH Temperature deviation: 0.1 to 1.0 K Heat compensation: approx. 800 W Equipment Touch control panel Program and constant operation Observation window Stainless steel test chamber Internal lighting Cable entry Movable on rollers Robust industrial design Weight approx. 635 kg Scope of Supply Binder MKFT 720 E3.2 Temperature and Humidity Chamber Scope of supply as shown in the pictures Functional testing Refrigerant service Leak test Nlsdpfx Alsy H H Smsnoc Test run with protocol Condition: Used. Condition: See pictures. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Binder MK 115 E3.1 Temperature Cycling Chamber Nlodjy H Hvlopfx Alnoc Device Data Manufacturer: Binder Type: MK 115 E3.1 Article Number: 9020-0175 Design: Temperature Cycling Chamber Refrigerant: R404A (1.20 kg) Description Used temperature cycling chamber from Binder. Suitable for dynamic temperature tests and rapid temperature changes. Used in material testing, research, and quality assurance. Technology APT.line™ preheating chamber technology Natural simulation of temperature profiles High precision and reproducibility Features MCS controller with program memory Adjustable ramp functions Temperature selector limiter Class 2 (DIN 12880) Heated viewing window with interior lighting Ethernet interface Feedthrough Ø 50 mm (left) Stainless steel interior with insert 4 rollers (2 lockable) Technical Data Temperature range: -40 °C to +180 °C Fast temperature changes (temperature cycling mode) Interior volume: 115 liters Dimensions External (W x H x D): approx. 980 x 1725 x 865 mm Internal (W x H x D): approx. 600 x 480 x 400 mm Electrical Data 400 V / 50 Hz Power: 3.5 kW Current: 11.0 A Pressure Data Max. operating pressure: 29 bar Weight approx. 260 kg Condition: Used. Optical and technical condition, see pictures. Scope of delivery: Binder MK 115 temperature cycling chamber Insert / interior fittings Inspection possible by arrangement. Loading and transport can be arranged upon request. Subject to change and prior sale. If you have any questions, please contact us.

Condition: excellent (used), Binder Temperature Test Chamber Type: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber for professional heat and cold tests in industry, research, development, and quality assurance. The Binder MK series temperature test chambers are particularly suitable for cyclic temperature tests and reproducible tests under defined environmental conditions. The test chamber enables temperature tests in the range of -40 °C to +180 °C and represents an efficient alternative to individual custom solutions. Technical data: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K (depending on the setpoint) Nljdpfxoy Nic Ho Alnjc Temporal temperature deviation: 0.1 to 0.5 ± K (depending on the setpoint) Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Equipment: 2 x feedthrough Ø 70 mm 1 door 2 shelves standard / max. 6 shelves possible Electrical data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse rating: 16 A Phases: 3~ Weight: approx. 320 kg For your safety as a buyer: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: Used Optical condition according to pictures Normal storage and signs of wear present Important note: All information has been compiled to the best of our knowledge based on the pictures, nameplates and manufacturer information. Shipping possible. Changes, errors and prior sale reserved. We will be happy to answer any further questions by telephone.

Condition: good (used), Impress HM 4 Hot Stamping Press This machine is in very good condition and ready to use. This machine is from the popular Impress hot stamping machine manufacturer, manufactured in the UK. Nedpszday Rsfx Alnolc Description The Impress hot stamping press is a hot stamping and embossing press for paper and plastics. It’s a useful device in any advertising agency or digital printing house. The manual press is powered by only 230V. A powerful press with adjustable pressure ensures repeatability and very high pressure between the die and the material. The machine features a worktop with a slide-out function, adjustable embossing depth, a heating plate with a thermostat, and an automatic foil feed. Specifications: Heating temperature control via thermostat Heating plate pressure mechanism: mechanical Press force: 1000 kg Power consumption: 500 W Power supply: 230 V Machine weight: 50 kg Plate size: 150 x 150 mm.

Condition: good (used), FKS PrintBind KB 2000 Book Binder This machine is 100% functional and ready to use. Manufactured by FKS Hamburg, Germany. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. The machine has a convenient base and a built-in compressor. Technical specifications: Maximum format: 320 x 310 mm Spine thickness: 60 mm Capacity: approx. 320 books/h Weight: 186 kg 230V power supply Material detection sensors Automatic cover detection and automatic cover clamp Spine milling Simple operation via LCD panel Adjustable cover clamping force Nsdpfx Aozday Dolnolc Infinitely variable glue thickness adjustment Includes user manual and compressor.

Condition: good (used), HFS-210 Hot Stamping Press The machine is in perfect condition. Year of manufacture: 2019. Nsdpezdau Usfx Alnjlc Description: The HFS-210 Hot Stamping Press is a pneumatic hot stamping press for hot stamping, embossing paper, and plastics. A useful device in any advertising agency or digital printing house. The cycle is operated manually. The pneumatic drive ensures repeatable work and very high die pressure on the material. The machine is equipped with an automatic foil feed, which significantly shortens the time of a single hot stamping cycle, a worktop, adjustable embossing depth, a hot plate ground to 0.01 mm accuracy, which significantly improves the quality of embossing with large dies, a control panel, and modern OMRON controls. Specifications: MODEL: HFS-210 Hot Stamping Press Heating plate size: 210 x 150 mm Work table area: 500 x 350 mm Heating temperature control: via display up to 200°C Holding foil adjustment: Automatic, potentiometer-controlled Hot plate pressure mechanism: pneumatic Height of the gilding stack: 68 mm Press force: 0.6 T Power consumption: 900 W Power supply: 230 V Machine dimensions: 750 mm (W) x 530 mm (D) x 1670 mm (H) Machine weight: 120 kg The machine includes a cross table and a die mounting frame. An instruction manual is included.

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Nodpfx Aezdat Rjlnjlc Made in Germany.

Condition: good (used), Bookbinding press with tapping block The machine is fully operational and ready for use. Approximate format: 480 x 330 mm 3-ton pressure Nlodpfozdatqex Alnec

Condition: excellent (used), Binder FD 53 Drying Oven / Heating Cabinet Manufacturer: Binder Type: FD 53 Year of manufacture: 2014 Made in Germany Drying oven / heating cabinet with forced air circulation for laboratory, research, quality assurance, material testing, and industrial applications. Technical data Internal volume: 53 liters Temperature range: approx. +5 °C above ambient temperature to 300 °C Internal dimensions (W x H x D): approx. 400 x 400 x 340 mm External dimensions (W x H x D): approx. 635 x 620 x 690 mm Load per shelf: 15 kg Maximum total load: 40 kg Empty weight: approx. 44 kg Power connection: 230 V Frequency: 50 / 60 Hz Rated current: 5.3 A Rated power: 1.2 kW Protection class: IP20 Equipment Forced air circulation system Digital temperature display Electronic temperature control Safety temperature limiter according to DIN 12880 Stainless steel interior Multiple shelf levels Robust laboratory design Inspection / Calibration DGUV V3 inspection performed on: 28.07.2023 Calibration performed on: 28.07.2023 Inspection and calibration stickers are attached to the device. Condition Used equipment. Device can be switched on, temperature display is active. Signs of wear and tear due to age and use. Optical condition as shown in the pictures. Scope of supply: see pictures. The table shown in the pictures is not included in the sale. Nljdpszcwxzsfx Alnec Shipping possible. Errors and omissions excepted.

Condition: used, With this offer, you are purchasing a used manual transfer press ‘Lotus LTS 150 B from 2023’. Nsdox Eg Upopfx Alnelc Item for sale: 1 x Lotus LTS 150 B with the following equipment: Includes DTF gel oven Year of manufacture: 2023 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: ready for operation (used), Binder 86 61111H03 Electromagnetic brake 24 VDC A.Nr. 2821/133,used, good condition, 100% working, scope of supply acc. photos Nodspnpluspfx Alnslc

Condition: ready for operation (used), Binder 86 61109H25, Serial No. 70100971/M2, 24 VDC, Brake. Serial number: 050008820, used, in good condition, 100% functional. Scope of supply as shown in the photos. Nledszbw Awepfx Alnjc

Condition: ready for operation (used), Binder 86 61104P01 Brake 5193503650, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nsdpji D T I Ijfx Alnslc

Condition: ready for operation (used), KUKA rotor with binder 86 61104H23 brake for 1FK7034-5AZ91-1ZZ9-Z S09 motor, the screw in the thread of the rotor is torn off, see photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Nsdou Tm E Nepfx Alnjlc

Condition: used, Year of construction: 2003, pressure 400 t distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm Nljdpfx Asvzxpuolnoc power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition

Year of construction: 2018, condition: excellent (used), functionality: fully functional, BINDER MKF240 Climate Test Chamber – 247 Liters | -40 °C to +180 °C | 10 % to 98 % RH For sale is a high-quality Binder MKF240 Climate Test Chamber in well-maintained condition. The unit is designed for demanding climate and temperature testing applications in research, development, quality assurance, and industrial environments. With an internal volume of approximately 247 liters, a temperature range of -40 °C to +180 °C, and a humidity range of 10 % to 98 % RH, the MKF240 is ideally suited for environmental simulation, temperature cycling, aging studies, material testing, and reliability testing. The stainless-steel interior and efficient air circulation system ensure uniform temperature and humidity distribution throughout the chamber. The integrated viewing window allows continuous observation of test specimens during operation. Technical Data Manufacturer: Binder GmbH Model: MKF240 Type: Climate Test Chamber Temperature Range: -40 °C to +180 °C Humidity Range: 10 % to 98 % RH Internal Volume: Approx. 247 Liters Stainless-Steel Interior Dynamic Air Circulation System Viewing Window Programmable Controller Made in Germany Nlsdezdqytspfx Alnsc Applications Electronics Industry Automotive Industry Aerospace Industry Material Testing Research & Development Quality Assurance Reliability and Aging Tests Key Benefits ✓ Combined temperature and humidity testing ✓ Precise environmental control ✓ Excellent temperature and humidity uniformity ✓ Robust industrial construction ✓ Ideal for laboratory and production environments Condition The unit is in good used condition. Inspection and functional testing are welcome by appointment. Additional photographs and technical information are available upon request.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox Versant 280” color production system Items for sale: 1 x Xerox Versant 280 with the following features: Includes Fiery NX Pro Server (EX 280) Includes Booklet Finisher A-GW03/A-GW06/A-FN13/ Includes Paper Deck A-CF06 with high capacity Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Nedpfxjzb Aivs Alnjlc Meter readings: Total: Approx. 1,977,908 pages Color: Approx. 698,361 pages Black: Approx. 1,279,547 pages Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, please feel free to contact us directly.