Used Briqutte Machine for sale (64,529)

Condition: used, Year of construction: 2013, operating hours: 55,929 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request Tedjzp R I Iopfx Amrec terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2001, operating hours: 70,000 h, clamping force: 50 kN, displacement volume: 739 cm³, injection pressure: 2,470 bar, overall weight: 2,500 kg, screw conveyor diameter: 28 mm, terms of delivery: FCA Pegnitz Todjzt Alyopfx Amroc delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, operating hours: 95,000 h, clamping force: 200 kN, displacement volume: 113 cm³, injection pressure: 2,178 bar, overall weight: 11,500 kg, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) delivery time: on request Tjdpfxsz A Ialj Amrjc terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Tsdjwz R Iujpfx Amrjc Delivery time: by arrangement Freight basis: ex-works

Condition: used, Year of construction: 1973, Technical details: grinding length: 400 mm grinding width: 200 mm workpiece height: 300 mm dimensions of grinding wheel: 275 - 315 mm magnetic plate size: 400 x 200 mm max. table load: 200 kg Tsdpfexu Dv Aox Amroc weight of the machine ca.: 1,6 t dimension machine xH: 1,55 x 1,45 x 2,20 m

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! Tsdpfx Ajxu Dxqjmroc *

Condition: used, Technical details: bending angle max.: 0 - 225 ° working height: 850 mm operating voltage: 380 V bending angle max.: 0 - 225 ° number of bars max.: 15 mm diameter max.: 55 mm revolutions per minute: 5 -16 U/min total power requirement: 5,5 kW Weight approx.: 0,7 t dimension machine xH: 1,60 x 1,20 x 1,02 m Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! Tjdpfxsx Adbnj Amrjc *

Condition: used, Year of construction: 1960, Technical details: workpiece height max.: 600 mm Arm length: ca. 700 mm bore capacity in steel (diameter): 25 mm Tsdpex Afn Nofx Amrsc Table dimensions: 1100 x 400 mm

Condition: used, Year of construction: 2009, Technical details: Beam Hour: unbekannt / unknown h laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) Tsdpfeyuvcijx Amrsc *

Condition: used, Year of construction: 1976, Technical details: table surface area: 1300 x 190 mm range of revolution per miute: 60 - 4000 Stufenlos U/min feed continuous: Pinole: 0,06 / 0,12 / 0,24 mm/U quill stroke vertical: 140 mm spindle taper: SK 40 spindle head swivable left - right: 90° und 45° ° total power requirement: 3,0 kW weight of the machine ca.: 1620 kg machine dimensions LxWxH: 2,7 x 2,3 x 2,4 m Milling machine with universal milling head Spindle run right/left Table specifications: X/Y/Z travel: 860/380/460mm. feed X/Y/Z: 40 - 400mm/min. continuous rapid traverse 400mm/min. max. workpiece weight 30kg Tedpfxeu Sq Eme Amrec Equipment 3-way measuring display Mitutoyo with beam machine lighting Coolant tank with pump X- and Y-axis feed adjustable incl. accessories comparable to the picture *

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 350 mm z-travel: 350 mm quill stroke vertical: 60 revolution per minute: 40 - 2000 U/min feed:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 headstock adjustment: schwenkbar 90° rechts/links mm headstock adjustment: Y-Weg: 175 mm table surface area: 600 x 285 mm distance spindle nose and table: min./max.: 50 / 400 mm distance spindle center to column: min./max.: 170 7 345 mm total power requirement: 1,6 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,1 x 1,7 m Tjdpfxju T Navo Amroc Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system *

Condition: used, Year of construction: 1987, Technical details: spindle diameter: 110 mm x-travel: 1985 mm y-travel: Spindelstock vert. 1270 mm z-travel: Tisch längs: 1260 m. Setzstock/1490 m. Setzstock mm table adjustment: nein ° B-axis (table): 360 W-axis (spindle longitudinal): axial: 710 mm U-axis: Planschieber radial: 250 mm control for program: Heidenhain 320 tool taper: ISO 50 Tsdpfx Aeu Utwbjmrsc table-size: 1600 x 1400 mm table rotating: 360 ° table load: 6,3 t range drill spindle revolution per minute: 6,3 ... 1250 / 4 step U/min revolution per minute: Plansupport: 6,3 ... 315 / 2 step U/min feed steps: Tisch: 5...2500 und Spindelstock vert. 5...2500 mm/min total power requirement: ca. 90 kW weight of the machine ca.: 30 t Tailstock Facing slide 700 Electronic handwheel max. turning Ø for drilling: 630mm max. turning Ø for facing: 1250mm At the moment the Horizontal Boring and Milling Machine has an electrical fault in the control (unknown). Our offer/sale is as described and as is! *

Condition: used, Technical details: Tedpfx Amsu U E T Iorec x-travel: 600 mm y-travel: 300 mm z-travel: 360 mm range of revolution per miute: max horiz. 40- 2000 U/min spindle taper: vert. / horiz. SK 40/ SK40 range of revolution per miute: max zul. 40 - 2000 U/min feed:: 2-3600 mm/min quill travel: 80 mm Table dimensions: 810 x 420 mm total power requirement: 3 KVA machine weight approx.: 1300 kg dimension machine xH: 1,8 x 1,35 x 1,95 m Milling machine with shaping head joint length 32-80mm with 10 x double strokes, 24-285 strokes/min Heidenhain 3-axis displays *

Condition: used, Year of construction: 1996, Technical details: x-travel: 2500 mm y-travel: 560 mm z-travel: 600 mm control: TNC 426 CA bore capacity in steel (diameter): 400 cm³/min Max. Milling-capacity: 400 cm³/min tool changer with: 34 Plätze Tool pull-in force: 12 kN spindle taper MT: SK 40 spindle throat: 580 mm Revolution per minute: 20...7500 steples U/min. max. torque on the spindle: 210 Nm distance spindle nose and table: 0 - 600 mm feed:: X/Y/Z = 1 - 24.000 steples mm/min. rapid traverse:: X/Y/Z = 24 steples m/min feed power: X/Y = 6 kN und Z = 8 kN kN table-size: 3300 x 500 mm table load capacity - central/maximum: 2500 kp interface: ja total power requirement: ca. 43 kW Weight approx.: 14,4 t dimension machine approx.LxWxH: 3,05 x 5,6 x 3,0 m dimension swarf conveyor LxWxH: 6.6 x 0,6 x 1,3 m VERTICAL DRILLING AND MILLING CENTER in travelling column design. with integrated coolant supply link belt chip conveyor MAN+HUMMEL with cooling water tank and pump cooling lubricant treatment ALLWEILER AG, size L:1550 x W: 1000 x H:1200mm; filter belt width 500mm; pressure 30bar Hydraulic unit Tsdpfx Amsvad Hpsroc Machining area can be partitioned, partition wall available *

Condition: used, Year of construction: 1998, Technical details: x-travel: 820 mm y-travel: 280 mm z-travel: 410 mm spindle taper ISO: SK 40 distance table/horizontal spindle: min. 30 / max. 440 mm cross rail adjustment - horizontal: 650 mm Todpfx Amjva Ei Ssrsc range of revolution per miute: 40...2000 / 18step U/min swival range +/-: bei 90°: 360° und bei 45°: 360° Grad clamping surface area: 1120 x 250 mm table swivable approx.: 45° rechts / links feed:: X/Y: 12,5 - 830 + Z: 5,2 - 260 mm/min rapid traverse: X/Y: 2500 und Z: 1040 mm/min. total power requirement: 10 kW machine weight approx.: 2000 kg dimension machine xH: 2,2 x 1,8 x 1,7 m Ausstattung: 2x Gegenlager Ø 55mm Kühleinrichtung: Pumpe und Zuführung Bedienung über 3-Wege Messsystem ACU-Ride und Bedientafel Maschinenfüße *

Condition: used, Technical details: x-travel: 762 mm y-travel: 382 mm z-travel: 419 mm tool taper: Sk 40 table surface area: 1070 x 230 mm range of revolution per miute: 60 - 4.200 U/min feed continuous: 0,038/0,073/0,120 in 3 steps mm/min spindle stroke: 120 mm spindle taper: Iso 40 spindle head swivable left - right: 90 ° weight of the machine ca.: 1600 kg machine dimensions LxWxH: 1,8 x 1,5 x 2,15 m This machine is currently in the technical department. Tsdeva Evfjpfx Amrec *

Condition: used, Year of construction: 2001, Technical details: grinding length: 2500 mm grinding width: 800 mm workpiece height: 800 mm Table movement horizontal: Längshub: 2700 mm Table movement horizontal: Querhub: 800 mm table speed: längs: 1 - 35 / quer: 0 - 3 m/min feed: vertical: 0,001 / quer: 0,0025 mm/Hub magnetic plate size: 2500 x 800 mm Automatic grinding wheel feed: 0,001 mm distance table - spindle center: 900 mm grinding spindle speed: k.A. U/min dimensions of grinding wheel: 400 x 76 x 127 mm Tjdpjvbgr Refx Amrjc total power requirement: 36 kW weight of the machine ca.: 13,5 t dimension machine xH: 7,5 x 2,8 x 2,7 m dimension coolant device LxWxH: 1,8 x 1,0 x 0,92 m dimensions of hydaulic: 1900 x 800 x 1500 mm transport measurements machine: L: 8,0 x B: 2,4 x H: 2,85 m The machine is currently in the technical department. technical features: -Hydraulic unit -dressing device *

Condition: used, Technical details: Tsdpjvc Akljfx Amrjc wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine approx.LxWxH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: used, Year of construction: 1996, Technical details: x-travel: 762 mm y-travel: 510 mm z-travel: 560 mm control: Heidenhain TNC 415 OR 360 tool changer with: 21 place table clamping surface:: 865 x 510 mm table load: 455 kg tool taper: SK40 spindle revolutions per minute : 60 - 8000 U/min feed:: X/Y/Z; 15 000 mm/min rapid traverse : X/Y/Z: 24 m/min compressed air: Bedarf: 5,5 bar Total power requirement: 30 kVA motor capacity: Spindelmotor: 11,0 kW max. torque on the spindle: konstant: von 60 - 750 KN Todpfou Idmvox Amrsc Weight approx.: 4,3 t dimension machine xH: 2,6 x 2,8 x 2,6 m dimension coolant device: L: 2,7 x B: 0,8 x H: 0,8 m Machining center with automatic tool changer IKZ and coolant supply through nozzles Chip and coolant tray Lubrication system through ball screws Manual control unit Heidenhain TNC 415 - dialog or according to ISO (machining cycles: deep hole drilling; tapping; slot milling; rectangular pocket and circular pocket milling; SL cycles), up to 100 programs in file management Machine can be visited with pleasure under power. i.D. *

Condition: used, Technical details: spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1600 mm z-travel: 2000 mm control for program: TNC Heidenhain 360 B-axis (table): ja W-axis (spindle longitudinal): Planschieber mm tool taper: ISO 50 table-size: 1400 x 1250 mm machine dimensions LxWxH: 8,0 x 6,0 x 4,5 m weight of the machine ca.: 28 t with face slide 700mm , electronic hand control Tjdou Idp Depfx Amroc *

Condition: used, Technical details: Tsdpfxeu Idu He Amrsc bore capacity in steel (diameter): 30 mm bore stroke: 180 mm drill spindle - Morse Taper: 4 x MK 3 spindle throat: 310 mm spindle distance: 490 mm number of drilling stations: 4 headstock adjustment: 300 (manuell) mm feed:: 0,08 - 0,64 / 6 step mm/U spindle speed:: 50 - 1.215 / 19 step U/min distance between table/spindle: max./min.: 500 / 200 mm table surface area: 1820 x 395 mm table adjustment: Höhe: 300 (manuell) mm total power requirement: 4x 1,5 (6,0 kW) kW weight of the machine ca.: 2,8 t dimension machine xH: 2,1 x 1,1 x 2,75 m Further technical data: -Center distance of the drilling spindle 490mm -thread cutting on drilling columns 3 and 4 with automatic switchover -All drilling spindles run with clockwise and counter-clockwise rotation -spindle countershaft and variator -with coolant system *

Condition: used, Year of construction: 1978, Technical details: bore capacity in steel (diameter): 100 mm arm length: 400 - 2100 mm cantilever adjustment vertical: 100 mm spindle taper MT: 50 drill depth: 415 mm spindle stroke: 400 (Skala) mm column turnable: 360 ° column diameter: Ø 500 mm distance drilling head - clamping area: min./max.: 400 / 1.800 mm number of spindle speeds: 12,5 ... 1.600 / 15 step U/min feed: 0,063 ... 2,5 / 15 step mm/U table clamping surface:: L x B: 2.000 x B: 950 mm total power requirement: ca. 35 kW weight of the machine ca.: o. Würfel = 8,0 t dimension machine xH: 3,40 x 1,16 x 3,51 m further information: - drilling spindle travel horizontal 1.700mm Tjdpfeu Id Awjx Amrec Equipment: - incl. drilling cube (horizontal surface: 1000 x 1000 x 500 mm, central bore Ø 35mm; 6 T-slots), (vertical surface: 1,000 x 500mm, 3-T-slots) - control panel - coolant system *

Condition: new, This is a new machine which is manufactured in Romania by the manufacturer Emsil. Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office. Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings. The machine is also equipped with a milling and boring bar which can handle exceptional power and torque. The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings. The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically Rotary Turntable: The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones. There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system. CNC Axes Control: The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc. The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc. You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm Tjdpfxeu Id H Ao Amroc *

Condition: used, Technical details: Tjdpeu Icdyofx Amrec sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m weitere Merkmale: 2x Biegewalzen: -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar -die Unterwalze hat einen Verstellweg von 12mm -Antrieb manuell über Handkurbel 1x Laufwalze: -Ø 63 x 1080mm -mitlaufend -Verstellweg ca. 5mm *

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t dimensions of machine: 1800x1850x2500 mm dimensions electric cabinet: Nr. 1: 1930x400x1920 mm dimensions electric cabinet: Nr. 2: 800x230x1950 mm dimensions:: Abluftanlage: 1400x700x560 mm dimension cooling device LxWxH: 1,2 x 1,0 x 0,45 m Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm Tjdpfx Amevc Apbjroc max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 77x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *