Used Briquette Press Machine for sale (91,719)

Condition: excellent (used), Year of construction: 1955, machine/vehicle number: 104 678 N, Format: A4 Dodpew Rb U Nofx Ab Tscr Number of Colors: 1

Condition: used, Single-column eccentric press WEINGARTEN type EV 63 Machine. No. 738 / 61 Year of construction 1962 Pressure capacity 63 ton. throat 260 mm Table surface 630 x 530 mm Table opening Ø 210 mm ram surface 315 x 260 mm Plunger stroke adjustable 8-100 mm Plunger adjustment 63 mm Installation height max 450 mm Stroke rate 115 strokes / min. Compressed air requirement min. 4.5 bar Dodjk S Htxopfx Ab Tjcr Motor power 4 kW Mains connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electric lift release via foot switch or two-hand operation - Overload protection by breaker plate - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC overrun protection - Front crankshaft support bearing - Press table height-adjustable via 2 threaded spindles - Manual central grease lubrication - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons good condition

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge (mild steel), corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. Dcjdpjtia Hhjfx Ab Ter

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: div., 2x ROLLEX ironing presses, for pre-ironing (PRE-IRON); working width: 2.25 m, Dcodpfxowpi Rkj Ab Tjr Washing machine / dryer set Washing machine Milnor; load capacity: 65 kg; year: 2004 + Dryer Kannegiesser; load capacity: 50 kg; year: 2005 + Dryer Passat; load capacity: 50 kg; year: 1984

Condition: new, Year of construction: 2025, drop-through hole in table: 220 mm, table width: 750 mm, table length: 1,000 mm, stroke adjustment: 140 mm, pressing force: 130 t, ram bore: 55 mm, punching force: 130 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD EQUIPMENT • Steel Construction Frame • Gear Unit Operating in Sealed Oil Bath • Four-Sided Bearing Alignment • Nodular Cast Iron Connecting Rod and Crank Bearings • Crankshaft and Drive Shafts Manufactured from 4140 Tempered Steel • Centralized Fully Automatic Grease Lubrication System • Pneumatic Clutch and Brake System • CE-Conformant Safety Standards • Dual-Base Safety Valve • Manually Adjustable Stroke • Photocell Safety Light Curtain • PLC Control System • Touchscreen LCD Panel (for 150-300 ton models) • Dual-Hand Safety Pedal Control System • Mechanical Safety Fuse System • Hydraulic Safety Fuse System (for 200-300 ton models) • Emergency Reverse Motor Motion • Complies with Occupational Health and Safety Regulations • Anti-Vibration Mounts • CE Certified • Models Available from 20 Tons to 300 Tons Dcedsvtyvgspfx Ab Tsr • 24-Month Warranty • Country of Origin: Turkey TECHNICAL SPECIFICATIONS CECP 130 C-TYPE MONOBLOCK FRAME Capacity: 130 Ton Throat Depth: mm Table-to-Ram Distance: 475 mm Ram Adjustment: 80 mm Press Width: 1600 mm Press Depth: 2000 mm Press Height: 3000 mm Table Hole Diameter: 220 mm Table Dimensions: 750 x 1000 mm Die Tie Rod Hole Diameter: 55 mm Ram Face Dimensions: 350 x 550 mm Table Height from Floor: mm Stroke: 20 – 140 mm Strokes per Minute: 45 spm Motor Power: 7.5 kW Motor Speed: 1400 RPM Weight: 6,000 kg • As a manufacturer, technical specifications may be modified upon request.

Condition: good (used), Schuler PE4s 50/800 high-speed press  Manufacturer: Schuler   Type: PE4s 50/800 High speed press 61/21 600/3 pressing force: 50 t throat depth: 800 mm Stroke rate /min: 125-300 slide stroke: 40 mm Kohler decoiler 500.1 M After the purchase you will also get the documentation We sell a large number of paternosters. In addition to approx. 50 paternosters, there are countless other machines available. Dcjdpfjgryc Nex Ab Tsr After purchase the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, Year of construction: 2023, RUF LIGNUM CLASSIC BRIQUETTING PRESS FOR WOOD THE ADVANTAGES FOR YOU AT A GLANCE: - Fully automatic 24h operation possible - Long service life - Low maintenance costs - Compact construction - Direct incorporation into existing production facilities possible - More than 35 years’ experience Dedpfxonxkrbs Ab Tecr The RUF LIGNUM Classic wood briquette press is ideally suited to briquetting medium quantities of wood chips that are produced as a waste product of the wood processing industry. Thanks to the process of briquetting, additional revenue can be earned and storage and transport costs are cut. Another advantage can be found in the flexibility of our wood briquette presses. They can press various grain sizes of material into high-quality briquettes, completely without the use of binding agents. As a result, as a valuable source of energy, RUF briquettes actually have a higher utilisation value and an optimum CO2 balance. Our LIGNUM range also performs well in terms of having a high level of energy efficiency and a low level of wear and tear, thanks to our innovative RUF hydraulics. - Max. throughput rate (kg/h) Wood: 410 - Power (kW): 30 - spec. Pressure, max. (kg/cm²): 1700 - briquette formats (mm): 150x60 - Size (m) Lenght x Width x Hight: 2,1 x 1,9 x 2,0 - ca. weight (t): 3,3 t - with suction hoods - PACKAGING TABLE is GRATIS

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg Dcedpfsgd D U Ejx Ab Tor All in as-new condition – the system was never used in series production.

Condition: ready for operation (used), Press Machine, Traveling Head Cutting Machine, Punching Machine, Stamping Press, Hydraulic Gantry Press,Sanson Chiesa Turbo, Used Machine Manufacturer: Sanson Model: Chiesa Turbo Overall Dimensions: 3480 x 1040 x 2420 mm Dcjdoukpcyepfx Ab Ter Weight: 5500 kg Electrical Data: 380V, 50 Hz Working Cylinder Diameter: 250 mm Operating Pressure: 200 bar Stroke Length: 120 mm Pressing Surface: 900 x 1000 mm Cutting Table: 1040 x 2500 mm

Condition: as good as new (ex-display), Year of construction: 2023, Press-in machine with automatic feed Dcsdpsld Thrsfx Ab Tsr via conveyor bowl Automatic feeds from above and below available. Touchscreen control with database for press-in pressure/fastener-dependent Thrust 450 mm Press-in force 56 kN Suitable for self-clinching fasteners up to M8/M10

Condition: new, Year of construction: 2025, throat depth: 370 mm, table width: 700 mm, table length: 1,200 mm, pressing force: 300 t, power: 30 kW (40.79 HP), punching force: 300 t, warranty duration: 24 months, Equipment: safety light barrier, C TYPE ECCENTRIC PRESSES GENERAL FEATURES - Steel construction frame - Stress relief on the frame and welded parts by vibration - Table-to-table parallelism and perpendicularity tolerance in accordance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram supported by 4 guides - Parts such as ram, connecting rod, and slide block are made of cast steel, GS52 - High-strength one-piece crankshaft – 4140 - Bronze bushings in the connecting rod (Zr14) - Equipped with spare bolster table - Table-to-ram adjustment by ratchet gear (motorized for 150 tons and above) - Manual central lubrication - Pneumatic foot pedal with locking and time-controlled dual hand control - Electric counter - PLC application and touchscreen – DELTA - Electric switching components from SIEMENS-SCHNEIDER - CE application OPTIONAL - Finger protection light barriers – SICK, LEUZE - Safety PLC (controls entire electric system, valves, dual control, and pedal) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Lockable limit switch and control panel - Safety block - Protective guards in accordance with CE regulations Dcodpfxsw E Rkqj Ab Tsr TYPE C TYPE MONOBLOC FRAME Capacity 300 Ton Throat Depth 370 mm Table-to-Ram Distance 530 mm Slide-to-Table Distance 650 mm Distance Between Walls 470 mm Ram Adjustment 150 mm Approx. Press Width 2000 mm Approx. Press Depth 2700 mm Approx. Press Height 3200 mm Front Anchor Size 940 mm Side Anchor Size 1440 mm Table Hole Diameter 260 mm Table Size 700 / 1200 mm Die Mounting Hole Diameter 60 mm Ram Size 780 / 400 mm Table Height from Ground 810 mm Stroke Adjustment 20 / 200 mm Strokes per Minute 38 spm Motor Power 30 + 2.2 kW Motor Speed 1450 RPM Approximate Weight 13,200 kg

Condition: excellent (used), Konica Minolta Accurio Press 6120 with 3 million copies in perfect condition, tested and ready to print! Equipment: PF 710 x 2 RU 510 FS 532 As an experienced retailer of used copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. Dcodovrd A Uspfx Ab Tjr We ship copiers coming from, and maintained by Konica Minolta France. If you have any questions don't hesitate to ask me Our company offers the largest range of Konica Minolta production copiers, and handle world-wide deliveries on request. Please do not hesitate to contact us for further information.

Condition: used, Bending tool, die, lower knife, lower tool, lower beam, -Tool: for folding machine -Widening: for lower cheek -Dimensions: 33/76/3040 mm Djdpfx Abecn Rd Re Tecr -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Dsdpfx Abswbvmio Tecr Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: new, Year of construction: 2025, throat depth: 350 mm, drop-through hole in table: 250 mm, table width: 1,100 mm, table length: 700 mm, stroke adjustment: 190 mm, pressing force: 250 t, ram bore: 60 mm, power: 22 kW (29.91 HP), punching force: 250 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD HARDWARE Below are the technical specifications and general features for the 250-300 ton C-type eccentric press you inquired about. - Welded steel construction frame - Stress-relieved and welded components by means of vibration - Parallelism and rigidity tolerance between tables in compliance with ISO and DIN standards - Pneumatic clutch and brake combination - OMPI (Italy) - Components such as ram, connecting rod, worm gear, in steel casting GS52 - High-strength solid crankshaft – 4140 grade - Connecting rod lined with bronze (Zr14) - Spare bolster plate - Mechanical interlock safety device - Ratchet mechanism for bolster/table adjustment - Manual central lubrication system - Pneumatic pedal with lock and dual control, adjustable timing - Electric stroke counter - PLC integration and production line display – DELTA - Electrical switchgear components by SIEMENS and SCHNEIDER - CE conformity - Finger protection light curtains – SICK, LEUZE, KEYENCE - Safety PLC (oversees all electrical systems, valves, dual and pedal systems) – PILZ - Dual solenoid safety valve – GPA - Locked position switch and control panel - Mechanical safety wedge - CE-compliant protective enclosures TECHNICAL SPECIFICATIONS Type: C-TYPE MONOBLOCK FRAME Capacity: 250 Tons Throat Depth: 350 mm Table-to-Ram Distance: 520 mm Table-to-Guide Distance: 630 mm Frame Width: 520 mm Ram Adjustment: 150 mm Press Width: 2000 mm Press Depth: 2500 mm Press Height: 3100 mm Front Mounting Holes: 930 mm Side Mounting Holes: 1430 mm Dcjdsvtyy Sspfx Ab Ter Table Bore Diameter: 250 mm Table Dimensions (W x L): 700 x 1100 mm Die Tie Rod Hole Diameter: 60 mm Ram Face (W x L): 670 x 380 mm Table Height from Floor: 810 mm Stroke: 20 - 160 mm Strokes per Minute: 40 spm Motor Power: 22 + 2.2 kW Motor Speed: 1450 RPM Weight: 12,000 kg *As a manufacturer, technical specifications are subject to change upon request. OPTIONAL EQUIPMENT (NOT INCLUDED IN PRICE) - 8-point slide adjustment & hydraulic safety system - Speed control - Automatic lubrication system

Condition: ready for operation (used), Konica Minolta Accurio Press with 1.1 million copies in perfect condition Tested and ready to work ! Equipment : - PF 710 - RU 510 - FS 532 As an experienced retailer of used copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. Dcodpfx Absr H Equo Ter We ship copiers coming from, and maintained by Konica Minolta France. If you have any questions don't hesitate to ask me Our company offers the largest range of Konica Minolta production copiers, and handle world-wide deliveries on request. Please do not hesitate to contact us for further information.

Condition: used, Bending tool, die, upper knife, upper tool, upper beam, goat-foot rail -Tool for folding machine -Pointed tool Dcodjb A Swlopfx Ab Tor -Dimensions: 45 x 120 mm -Length: 800 mm -Weight: 19 kg

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm bending angle 0-180 Dedpfxjdzqaao Ab Tocr - Upper beam adjustment via hand crank - pre-screw rail for the bending beam - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm weight 160 kg good condition

Condition: new, Year of construction: 2025, pressing force: 100 t, table width: 670 mm, table length: 950 mm, drop-through hole in table: 180 mm, power: 7.5 kW (10.20 HP), punching force: 100 t, ram bore: 45 mm, stroke adjustment: 120 mm, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM Dedpfx Ajvtx Ineb Tecr • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 100 STROKE ADJUSTMENT RANGE (MM) 10-120 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 50 RAM - REGULATION RANGE (MM) RAM - TABLE DISTANCE (MM) 450 LOWER TABLE DIMENSIONS (MM) 670X950 LOWER TABLE HOLE DIAMETER (MM) 180 RAM TABLE DIMENSIONS (MM) 350X530 RAM MOLD EYEBALL DIMENSIONS (MM) 45 MOTOR POWER (KW) 7.5 WEIGHT (KG) 4600 MACHINE DIMENSIONS (MM) (H - W - L ) • SINCE WE ARE A MANUFACTURER CHANGES CAN BE MADE IN TECHNICAL SPECIFICATIONS IF REQUESTED.

Condition: like new (used), -----Konica Minolta Accurio Press C 6100 with 554 495 copies----- ----- Color parts like new this machine has only 3630 print in color !!!!! ----- Tested and ready to work ! Equipment : - IC 313 - PF 711 - PF 707 m - RU 513 - FS 532 As an experienced retailer of used copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. We ship copiers coming from, and maintained by Konica Minolta France. If you have any questions don't hesitate to ask me Our company offers the largest range of Konica Minolta production copiers, and handle world-wide deliveries on request. Dsdjr H H D Aepfx Ab Tscr Please do not hesitate to contact us for further information.

Condition: used, Bending tool, die, upper knife, upper tool, upper beam -Tool: for folding machine Djdpfx Abocn Shre Tscr -Dimensions: 60 x 15 mm -Length: 1020 mm -Weight: 6 kg

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Dcjdpjmck Rysfx Ab Tor Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Dodpfx Ashmmfkjb Tscr Weight 8.5 tons. Good condition

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top Djdpfsrzfh Hox Ab Tocr - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg Dcsdpfx Ash U Dtujb Tsr In very good condition