Used Book Press Machine for sale (68,202)

Condition: used, Year of construction: 2018, machine/vehicle number: BE2F 1145, Submitting a bid obligates you to collect the item by December 23, 2026! MACHINE DETAILS Voltage: 230 V Mains connection: 1 + N Frequency: 50 Hz Fpodpfx Ahs Agvr Ie Ejp Note: Accessories are provided without warranty. The principle applies: "Item purchased as is". The prospective buyer must verify the completeness of the item on site.

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press Fsdpfez Rk Nyex Ah Eepp This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland

Condition: good (used), Schmedt hardcover book production line Fsdpfx Aez S Uzieh Eopp The machines are in very good condition and have seen little use. The set consists of the following machines: – Schmedt PraLeg book block casing-in machine – Schmedt PraForm Pro book press and joint-forming machine – Schmedt SC-3 Autocase cover assembly table – Schmedt PraziCoat Pro gluing machine (coater) – Schmedt BT-1 Board Trimmer (automatic board cutter) Includes documentation, spare parts, and glue.

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Fedoz Rk N Tepfx Ah Ejpp Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: used, Year of construction: 2008, operating hours: 9,950 h, functionality: fully functional, working width: 220 mm, stack height: 640 mm, type of input current: three-phase, product height (max.): 220 mm, product width (max.): 640 mm, Handfeed station – 14 x feeder - 12 Clamp Binding Unit - Milling & Spine Preparation Units - Hot Melt Side Glue with pre-melter – Hot Melt Spine Glue with pre-melter - Drum Cover Feeder - Nipping & Pressing Station - Exit Raceway & Laydown Delivery - Conveyor System with Reject Gate - Muller Martini Esprit Trimmer Fpsdpfextau Eex Ah Ejp Binding thickness 2 mm - 50 mm Cover size max. 640 mm Cover size min. 202 mm Max. speed 900 to 4,000 cycles/hr. Max. book size 380x320 mm Min. book size 120x100 mm

Condition: good (used), Karl Krause Hot stamping press Manufactured by Karl Krause, Germany, The machine is fully operational, after modernization of the control system. Extendable work table. Timer control allows the machine to be started at a specific time to ensure it is ready for operation. 380V power supply. Heating plate size: 400x530mm. Weight: approx. 800kg. Fodpj Aitimefx Ah Eopp

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Fodpfxoz Rk N Ho Ah Eopp Made in Germany.

Condition: good (used), Tranklein BP bookbinding press for pad/block pressing The machine is in very good condition, fully functional, and ready for production. Power supply: 380V. Fast operation. Hydraulic power unit. Format: 340 x 260 mm. Stack height: 820 mm. Adjustable pressing force, max. 2500 kg. Weight: 250 kg. Fedpfx Ahoz S Utlo Eopp Mounted on casters for easy movement.

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 0/41938, BDM20 case maker (book cover machine), 1992 Fjdpfx Aoxqd I Djh Espp

Condition: ready for operation (used), Year of construction: 2022, Hongming HM-950 continuous roller pressing and flattening machine, suitable for the production of hard covers, book covers, folders, presentation materials, rigid boxes, and other glued cardboard or paper products. The machine continuously feeds the material through a large pressure roller via a conveyor belt. This ensures an even pressing result, improves adhesion between the glued layers, and helps to remove trapped air bubbles and irregularities. The pressure and working height can be adjusted manually on both sides of the machine. Technical specifications: * Manufacturer: Hongming * Model: HM-950 * Machine type: Roller pressing and flattening machine * Year of manufacture: June 2022 * Working width: Approx. 950 mm * Serial number: J01010089-0026 * Voltage: 380 V * Frequency: 50 Hz * Current: 3.4 A * Motor power: 0.75 kW * Power supply: 3-phase * CE marked Fpsdpfozq Tz Tsx Ah Ejp Suitable for: * Hard-cover production * Bookbinding and book-cover production * Rigid-box and luxury-box components * Greyboard with glued covering paper * Folders and presentation covers * Cardboard and paper converting * Pressing and smoothing of glued materials Condition and equipment: The machine is in clean overall condition and appears complete. It is equipped with a continuous conveyor belt and a large covered pressure roller. The original English-language operating manual is included. Inspection is possible by appointment.

Condition: used, Falzeinbrenn- und Abpressmaschine - Book press and joint-setting machine Zechini CIMATIC Fjdpfs Aikf Isx Ah Eopp Year 2000 - Serial-No. 124/00 Buch Format max. Buchhöhe 48cm x Buchbreite 35cm x Buchblockstärke 9cm Book Size max. height 48cm x width 35cm x thickness 9cm Leistung max 150 in St./h / Output 150 pcs/h Pressluftanschluss 6 bar / Air pressure supply 6 bar Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Bookbinding press with tapping block The machine is fully operational and ready for use. Approximate format: 480 x 330 mm 3-ton pressure Fpsdpfxez Rk Rkj Ah Esp

Condition: ready for operation (used), Consisting of: full tools, books and accessories available Fpsdpfjq Aufqjx Ah Eop Technical Data Working range -base machine with electric equipment -in feed unit, MR -book bloc in feed with splitter -gluing unit -pre-heater and heated rounding unit -paternoster with press on unit -belt delivery 370mm x 270mm x 80mm max 125mm x 100mm x 6mm min 14 – 36 cycles per minute

Condition: like new (used), Year of construction: 2021, Unique opportunity for an absolutely like-new Schmedt hardcover production line! The line has a total of only 99 units on the overall counter. Reading taken from the PräLeg XS. It was only assembled for testing in 2021 and has never been used otherwise, therefore the condition is absolutely excellent! ____ Schmedt PräziCoat | Type 238-20 Fsdpfx Ahj Ai S Inj Eepp Two-roller gluing machine for cold and hot glue. Year of construction: 05/2021 Roller width: 400 mm Dimensions W x D x H: 77 x 62 x 40 cm Weight: 75 kg Schmedt PräDeck | Type 2360 Casing-in machine Year of construction: 04/2021 Dimensions W x D x H: 72 x 57 x 36 cm Weight: approx. 25 kg Schmedt PräKant | Type 1600 Edge trimming and burnishing machine Year of construction: 04/2021 Dimensions D x W x H: 46 x 97 x 34 cm (without tables) Dimensions D x W x H: 111 x 97 x 34 cm (with tables) Weight: 65 kg Schmedt PräLeg XL | Type 18-60 Book block gluing and hanging machine Year of construction: 05/2021 Dimensions D x W x H: 104 x 67 x 185 cm Weight: approx. 325 kg Schmedt PräForm XS | Type 72-00 Book press and spine pressing machine Year of construction: 12/2020 Dimensions W x D x H: 60 x 57 x 49 cm Weight: 92 kg

Condition: excellent (used), Year of construction: 2017, Ref:11156 . 2017 Schmedt Präleg XL Casing-in Pressing Machine For casing-in a variety of thin to thick books into flexible or hard cases. Special features: • Programme selection via touch-screen monitor • Very short set-up and strip down times • Auto wash-up of glue rollers after each book Vertical wing action Twin PVA cold glue tanks. Specification, Praleg 18-60: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Fpedoz Hbuqepfx Ah Eep Production rate: approx. 200 – 300 pcs/h Power supply: 230 V + compressed air.

Condition: good (used), Schmedt PraKant Turning-in machine The PräKant is a turning-in machine designed to turn in and press down the edges during the production of book covers and other products. Weight: 150 kg Fedpfx Ahjz Dtb Ro Espp Power supply: 400 V Flexible speed control.

Condition: excellent (used), Year of construction: 2009, Ref:11169 . 2009 Schmedt Präleg & Präform Casing-in & Pressing Machines For casing-in a variety of thin to thick books into flexible or hard cases. Fpsdpfs Ah D Nhex Ah Eep Special features:- • Programme selection via touch-screen monitor • Very short set-up and strip down times • Auto wash-up of glue rollers after each book Vertical wing action Twin PVA cold glue tanks Working in conjunction with:- 2008 Schmedt Präform 2100 Pressing & Joint Forming Machine. For pressing a variety of thin to thick hard cover books immediately after casing-in. Suitable for single or assorted books, pressing & burning in the joint in a single operation. Specification, Praleg 18-60: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Specification, PraForm 2100 Book press with groove cutter. Maximum format: 420 x 520 x 100 mm Power supply: 230 V + compressed air.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, The Kolbus SW.E 500 is a high-performance corner-cutting machine for the industrial processing of high-quality cardboard packaging. It was specifically designed for the automated production of luxury packaging and rigid boxes. The Kolbus SW.H 500 is a high-performance box-making line from the German manufacturer Kolbus Group GmbH. The machine processes pre-scored and corner-cut cardboard sheets. The Kolbus SW.H 500 applies adhesive to the pre-formed creases, erects the side walls, and precisely fixes them to create a stable, foldable rigid cardboard box. Fpodozblxmspfx Ah Eop

Condition: good (used), The Regubinder RBS is a bookbinding machine ideal for binding books and documents. This device is perfect for small print runs or private use, allowing you to achieve professional results. Fedpfs Aiwynsx Ah Eopp

Condition: good (used), Hello, -The item for sale is: -Hang 87D 3P twin-head riveting machine. -Manufacturer: Hang, Germany. -Good condition. -The machine is used for riveting eyelet rivets. -Two riveting heads, with adjustable spacing. -Cardboard thickness: 0.2-4mm. Fodpfx Ahjz Sk Hps Eepp -Weight: 570kg. -Power supply: 380V. -Shipping via freight forwarder is possible (individual pricing).

Condition: excellent (used), Year of construction: 1970, machine/vehicle number: T171 074 N, WITH HOT FOIL STAMPING DEVICE Fpjdpfx Aew Rcrpeh Esp Format: A4 Number of Colors: 1

Condition: repair required (used), Year of construction: 1987, functionality: not functional, machine/vehicle number: TCC1023, overall weight: 9,000 kg, Thread and Ball Screw Grinding Machine – 2,300 mm Working Length Technical Specifications: Working length: 2,300 mm Maximum diameter: 400 mm Application: Grinding of threaded spindles and ball screws Machine Condition: This machine was previously used for precision grinding of threaded spindles and ball screws. The machine is mechanically fully functional and complete, with all mechanical components and accessories present. The electrical control cabinet is missing and will need to be replaced to restore the machine to operational condition. Fsdpfs Ai Rmcox Ah Espp Complete technical documentation is available with the machine. The machine is offered for sale in its current condition, as is. For further information, additional photographs, or to arrange an inspection, please feel free to contact us.

Condition: new, Year of construction: 2026, control type: manual, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, overall weight: 1,000 kg, total length: 4,200 mm, total width: 900 mm, total height: 1,100 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, Highly precise press brake for steel, copper, zinc, and aluminum sheets. These press brakes and all common spare parts are available ex stock. Maximum working length of the press brake: 4200 mm Bending capacity: up to 0.8 mm (steel sheet) Titanium-zinc sheet: 0.8 mm, aluminum sheet: 1.0 mm, copper sheet: 1.0 mm Bending angle of the bending machine: max. 160 degrees Cutting with the roller shear across the entire working width Bending ram thickness: 20 mm Cutting with the roller shear across the entire working width Raising of the upper beam in three positions Upper ram stroke: 80 mm Degree scale Weight of the press brake: approx. 810 kg Cutout 60 mm / 45° Roller shear 0.8 mm, additional cost: 350 Euro Manual folding machine, additional cost: 75 Euro Delivery costs: 500 Euro to Germany and Austria Fjdpeb Hxzyofx Ah Espp Delivery date: every week, Monday/Tuesday Payment upon delivery or prepayment Invoice will be issued with 0% VAT. Your VAT identification number is required for this.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Listing Title JMD Superbinder Challenger-5000 Perfect Binding Line with Supertrimmer-100 Three-Knife Trimmer (2013) Key Technical Data Category: Post-press / Bookbinding machinery / Perfect Binding Line Manufacturer: JMD Machinery Corporation Limited (Shenzhen, China) Binder Model: SUPERBINDER CHALLENGER-5000 Serial Number: 0Y25114 Date of Manufacture: March 2013 Fodpfxs Af Hf So Ah Espp Three-Knife Trimmer Model: SUPERTRIMMER-100 (In-line) Total Power: 55 kW Power Supply: 3-Phase / 380 V Net Weight: 5,800 kg Machine Dimensions: 10,300 × 1,900 × 1,410 mm Certification: CE compliant Condition: Very good, fully operational, installed in production, and available for running demonstration System Configuration & Features JMD Challenger-5000 Perfect Binder: Automated block feeding and high-precision spine preparation station with milling and notching tools. Hot-melt adhesive system with dual application units for spine gluing and side gluing. Automatic cover feeder equipped with scoring and creasing mechanisms. Integrated waste paper chip extraction and bag filtration system. Cooling & Conveying Section:Extended conveyor belt setup ensuring gradual cooling and adhesive curing prior to trimming. Automatic Three-Knife Trimmer:SUPERTRIMMER-100 synchronized in-line unit for automated three-side final book trimming.

Condition: used, Year of construction: 1979, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, overall weight: 2,500 kg, total height: 1,660 mm, total length: 7,000 mm, total width: 1,600 mm, input frequency: 50 Hz, Automatic Creasing and Riveting Machine by Kugler Fjdpfx Ahe Ah Tm Ns Eopp Automatic creasing and riveting machine from Kugler, designed for efficient and precise processing of binders and other cardboard products. The machine performs both creasing and riveting automatically, ensuring consistent, professional results while improving production efficiency. The machine can handle formats ranging from 175 × 350 mm up to 340 × 600 mm, making it suitable for the production of binders and other products in various sizes.