Chiller

RPS FAS096

Condition: used, Thread rolling machine ORT RP30U 2-roll 30 ton Dodpfjt H Ty Uex Akcecg swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Power (Ton): 30 Number of rollers: 2

Condition: good (used), Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 752 -Power: 4 kW / 1450 rpm -Volume flow rate: 28.11 m³/h -Max. operating pressure: 24.5 bar Dedjguztgepfx Akcscg -Dimensions: 640/450/H425 mm -Weight: 131 kg

Condition: good (used), Offer consisting of: SM102-2P, year of manufacture 2000, CP2000 remote ink control, impression count: 200 million, new rollers, Technotrans, Autoplate, chrome cylinder, Dcjdoy Hbp Tspfx Akceg

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Cutting Disc Diameter: Approximately 280 mm (11 inches). Dodpfx Aewnx Uiekcecg Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Hopper Opening: Approximately 1,400 mm x 1,600 mm. Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Weight: Approximately 2,500 kg

Condition: used, Year of construction: 2001, pressure 0,2-40 t max. workpiece diameter 70 mm threading length 120 mm Control total power requirement 29 kW weight of the machine ca. 9,5 t Dcedpfx Aket Hw N Tscog dimensions of the machine ca. m

Condition: good (used), Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine, cooling unit Dcsdpeguzr Hjfx Akcjg -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 592 S -Power: 3 kW / 1450 rpm -Volume flow rate: 22.14 m³/h -Max. operating pressure: 24.5 bar -Number: 2x cooling units available -Price: per piece -Dimensions: 550/315/H390 mm -Weight: 88 kg

Year of construction: 2017, condition: ready for operation (used), Material throughput: LDPE: 110kg/h, PA6.0/LDPE/EVOH: 150kg/h, PP/PA6.0/LDPE/EVOH: 135kg/h, PA6.0/LDPE: 120kg/h, EVA/LDPE: 150kg/h. Nominal output: 77kW, PCU output: 30kW, extruder output: 18.5kW, motor output: 10.7kW, heating zones: 1, heating output: 12kW. Documentation available. On-site inspection is possible. Dedowty Hkopfx Akcscg

Condition: used, TECHNICAL DETAILS - max. power : 40 [t] - max. workpiece diameter : 40 [mm] - spindle diameter : 80 [mm] - spindle length : 120 [mm] - max. tool diameter : 250 [mm] - dimensions : 2400 x 2100 x 2200 [mm] - weight : 7100 [kg] EQUIPMENT - control CNC (base Siemens) Dsdpfsuhb Uhsx Akcocg - tail stock device - coolant tank with pump - 2 boring wheel 80, diameter : 260 [mm]

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Dcsdpouz If Nsfx Akcsg Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, ORT RP18B overhauled Dodpfjuua H Rjx Akcocg