Used Brake Bleeding Device for sale (27,814)

Condition: ready for operation (used), controller manufacturer: TS3, installation height: 515 mm, operating speed: 20 mm/s, reverse speed: 90 mm/s, total length: 3,400 mm, total width: 1,850 mm, total height: 2,820 mm, power: 9 kW (12.24 HP), travel distance Z-axis: 265 mm, empty load weight: 5,000 kg, passage width: 2,550 mm, upper lower Wila tooling Kfodpfx Afsx Imkfefja 5 axes: X / X' / R / Z1 / Z2 Capacity: 50 ton x 2550 mm Backgauge: CNC Locking speed: 90 mm/sec

Condition: like new (used), Device for cleaning die-cut sheets German production, Metabo. 230V power supply. Easy-to-use, manual device for removing external waste from the pallets of die-cut sheets. Kjdjwyxi Rspfx Affsfa Safe, two-handed operation of the device.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, control type: CNC control, actuation type: electric, controller manufacturer: Safan, controller model: TS1, bending force (max.): 80 t, working width: 2,550 mm, stroke length: 290 mm, throat depth: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, operating speed: 90 mm/s, table height: 950 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 6,800 kg, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, input voltage: 400 V, warranty duration: 3 months, pressing force: 80 t, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Kodjut S E Njpfx Affofa Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm -Weight: 1.4 kg Ksdpjxvp S Eofx Affofa

Condition: repair required (used), Manufacturer: Amada Type: 5020 Year of construction: 1990, Number of axles: 3 Pressing force: 50t Bending length: 2000mm Kodpfxjv Umm Io Affjfa Sold without prisms, The machine works, moves, Error: End position of the Y-axis must be repaired. Height adjustment is missing,

Condition: new, functionality: fully functional, Year of construction: 2025, bending force (max.): 1,000 t, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, overall weight: 8,000 kg, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, bending angle (max.): 90 °, table length: 3,200 mm, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending! Kedsv Hchlepfx Affofa

Condition: reconditioned (used), 1 x Elektronic Motor Braking Unit EMG15 Power range 3 - 15KW Kfjdpjxc D Uuofx Affsa Voltage range 200-575V Power frequency 50Hz/60Hz Siemens EMG 15 Motor brake for Weinig machine Unimat and Hydromat series Working tested on Weinig machine

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Required scope of delivery for push-through protection: 01x U-profile, used Material color: sendzimir galvanized total length: approx. 2.765 mm profile dimension: C: 60x40x8 mm including 2 agraffes Further information: Shelving system: SSI Schäfer suitable f. clear width: approx. 2.700 mm 06x hexagon bolt: M8 x 35 mm 06x Toothed nut: M8 06x washers: M8 General information about the item: This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Kedsh Ekdfspfx Affsfa Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: ready for operation (used), Year of construction: 2023, General Data Machine weight 1800 kg Measurements height 2200 mm Kfsdpfxjx I S Rws Affsa Dimensions Machine Length 1440 mm Main Drive Number of axis 3 Pressing force 220 Kn This 3-axis Coastone Cone C9 press brake was manufactured in 2023. It features a C-frame design, a pressing force of 220 kN, and a maximum bending length of 900 mm. Equipped with an Omron Touchscreen TC15-2D CNC control and Amada Promecam tool clamping system, it ensures precision and ease of use. Located in Slovenia, it comes with a complete bending tool set and a 36-month warranty. Consider the opportunity to buy this Coastone Cone C9 press brake. Contact us for more information. Application Types Bending

Condition: good (used), functionality: fully functional, Year of construction: 2005, Used 2-meter CNC press brake from Trumpf Kedpfx Asx I N Awsffefa Model: V85 Capacity: 2050 x 85 tons Delem CNC control CNC-controlled Y1, Y2, X, and R axes Wila hydraulic upper clamping Year of manufacture: 2005 Without tools

Condition: excellent (used), Model: DENER PUMA PX 30320 Year of manufacture: 2021 Serial number: 12352 Bending length: 3050 mm Pressing force: 320 tons Maximum hydraulic pressure: 280 bar Main motor power: 30 kW Oil tank capacity: 400 l Kfedpfx Aexw U Rijffoa Weight: 14,300 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 42,663 h, controller model: MMC PLC, bending force (max.): 320 t, working width: 4,100 mm, stroke length: 265 mm, throat depth: 400 mm, TECHNICAL DETAILS Press force: 320 t Bending length: 4,100 mm Travel X-axis: 600 mm Travel R-axis: 250 mm Travel Z-axis: 2,900 mm Stroke: 265 mm Throat depth: 400 mm Distance between uprights: 3,750 mm Installation height: 550 mm Table width: 60 mm MACHINE DETAILS Controlled axes: Y1, Y2, X, R, Z1, Z2 Control system: MMC PLC Oil capacity: 600 l Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,300 x 4,020 mm Weight: 29,000 kg Operating hours: 42,663 h EQUIPMENT Hydraulic crowning Kfodjx I Hzwopfx Affsa Side safety fences Rear safety guard FIESSLER light barrier Note: The machine is sold without tooling.

Condition: ready for operation (used), Switch Testing Device - 3x test stations for appliance switch testing - Voltage: 0–600V AC / DC - Current rating: max. 40A - Operation of test switches via pneumatic cylinders - Testing with resistive and inductive loads according to EN 61058 (VDE 0630) - 1x thermal chamber (oven) for testing at ambient temperatures up to 125°C - Testing of appliance switches with rated data 250Vac / 16(4)A / 125°C Buyer responsible for disassembly! Kfsdpfx Ajx I Ef Usffoa

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery are: 01x slide-through protection, used Material color: hot-dip galvanized total length: approx. 2.700 mm U-profile: 50 x 50 mm Agraffe dim.: 335 x 50 mm (HxW) 04x hexagon head screw: M10 x 35 mm 04x Toothed nut: M10 08x washers: M10 Further information: System: SSI Schaefer for type designation: PR350/400 designed for double rack rows suitable f. clear width: approx. 2.700 mm Ksdpfx Afoh T Uwvsfefa General information about the article: This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Keyboard, control panel, industrial, PLC workstation, programming device -Manufacturer: Siemens, programming device Simatic PG 605 with case -Type: Simatic PG 605U 6ES5 605-0UA12 Kodpjhyx Rkofx Affjfa -Dimensions case: 390/300/H90 mm -Total weight: 1.7 kg

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used 3 meter CNC press brake by Safan Model: DNCS 110 3100 Capacity: 3100 x 110 tons CNC controlled axes: Y1, Y2, X, R, Z1, and Z2 Kfodpfx Afex I Nzyjfoa Manual crowning 1 set of tooling Upgraded ESA 630 CNC control New laser safety system

Condition: excellent (used), Year of manufacture: 2005 Serial number: 8293 Press force: 120 t Kodpfexna S Hsx Affofa Bending length: 3100 mm Max. stroke: 260 mm Operating pressure: 240 bar Motor power: 11 kW Power supply: 400 V / 50 Hz / 3 phases Machine weight: 7,500 kg Machine dimensions (L x W x H): 3550 x 1800 x 2800 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, controller model: Cybelec DNC 1200, bending force (max.): 250 t, working width: 3,550 mm, distance between stands: 3,000 mm, overall weight: 18,500 kg, TECHNICAL DETAILS Press force: 250 t Bending length: 3,550 mm Distance between uprights: 3,000 mm MACHINE DETAILS Controlled axes: y1, y2, x, r, z1, z2, back gauge tilt Control unit: Cybelec DNC 1200 Kedpfex I Ebijx Affjfa Dimensions & weight Footprint (L x W x H): approx. 4,300 x 2,750 x 3,750 mm Machine weight: approx. 18,500 kg EQUIPMENT Two-hand foot switch Lasersafe Fisseler Hydraulic tool clamping top and bottom Die shifting Hydraulic crowning Support arms 1 set of upper and lower tools Safety guard

Condition: used, Year of construction: 2021, operating hours: 177 h, Please contact ATS Norway for more information Please provide reference number upon request: 19184 Specifications: - Hours: 177 - 90 km - 8-wheel drive? - Good tires - Automatic box - With front screen - Lots of extra light - Radio/Cd - Climate/ac - Diesel - With belts Kodpfxjvg At Io Affjfa Worl Power Er-180 000L-8 crane 180 t/m from 2016   Superstructure: - Supportlegs - Extra light - Quick attach - Reversing camera - Central grease Hours: 177

Condition: used, functionality: fully functional, Year of construction: 2011, Used 3 meter CNC press brake Kedpfx Aex I Nzgoffefa Model: E Brake 100 3100 Capacity: 3100 x 100 tons Y1, Y2, X, R, Z1 and Z2 CNC controlled TS1 CNC control Year of manufacture: 2011 Wila hydraulic tool clamping Available directly from January 7

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, bending force (max.): 80 t, working width: 2,500 mm, stroke length: 200 mm, overall weight: 7,500 kg, Equipment: foot remote control, TECHNICAL DETAILS Press force: 80 t Bending length: 2,500 mm Stroke: 200 mm MACHINE DETAILS Dimensions & Weight Required space (L x W x H): approx. 3,700 x 2,000 x 3,200 mm Machine weight: approx. 7,500 kg Kodex I Ealspfx Affefa EQUIPMENT 2 support arms in front of the machine Light barrier in front of the machine Foot pedal

Condition: excellent (used), Year of construction: 2018, Very neat used press brake from Durma Type AD S 40320 Capacity 4050 x 320 tons Delem DA 69T control CNC-controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, and Z2 (3D back gauge) Hydraulic Wila NS upper and lower clamping Kfodex I A Efepfx Affsa CNC crowning

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, controller model: Cybelec DNC 800, bending force (max.): 160 t, working width: 3,000 mm, distance between stands: 2,650 mm, overall weight: 16,000 kg, TECHNICAL DETAILS Press force: 160 t Bending length: 3,000 mm Frame gap (distance between uprights): 2,650 mm MACHINE DETAILS CNC axes: y1, y2, x, R Control: Cybelec DNC 800 Machine weight: approx. 16 t EQUIPMENT Two-hand foot switch Hydraulic top tool clamping Hydraulic crowning Hydraulic bottom tool clamping 5 manually adjustable backgauge fingers Die shifting Tool package Kjdpsx I D T Rsfx Affsfa Side safety doors

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, controller model: CYBELEC DNC 880S, bending force (max.): 100 t, working width: 2,050 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Pressing force: 100 t Bending length: 2,050 mm MACHINE DETAILS Controlled axes: Y1, Y2, X, R, Z1, Z2, X1 Control: CYBELEC DNC 880S Ksdpfxex I D Sas Affofa Dimensions & weight Dimensions: 2,650 x 2,600 x 2,700 mm Weight: 8,000 kg EQUIPMENT Hydraulic Wila upper clamping Motorized crowning

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, controller model: Cybelec DNC 60, bending force (max.): 50 t, working width: 2,050 mm, Equipment: foot remote control, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 50 t Bending length: 2,050 mm MACHINE DETAILS Controlled axes: Y1, Y2, X, R Control unit: Cybelec DNC 60 Weight: 7,000 kg Kfedpfxex I D E Hs Affsa EQUIPMENT Foot pedal Hydraulic upper tool clamping 2 manually adjustable backgauge fingers Tooling