Used Blood Presure Device for sale (11,649)

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm Gslhcdjxvp S Esw Dstw -Weight: 1.4 kg

Condition: like new (used), Device for cleaning die-cut sheets German production, Metabo. 230V power supply. Gjlewyxi Rehcdw Dstw Easy-to-use, manual device for removing external waste from the pallets of die-cut sheets. Safe, two-handed operation of the device.

Condition: used, functionality: fully functional, Year of construction: 2013, load capacity: 45,000 kg, empty load weight: 3,800 kg, total length: 8,000 mm, construction width: 2,500 mm, Special equipment Condition: Ready for use and fully operational Technical condition: Very good Gjlhceyn St Djdw Dstw Multi-purpose spreader for reachstacker with 27 lifting eyes and 2 support stands

Condition: good (used), Turning device, turning station, turning table, rotary station, rotary table, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press -without: hydraulic unit (can be supplied at an extra cost) -Turning station for: rotating workpieces -Inner width: 1075 mm -Interior height: 720 mm Gslhed Tg Dcocdw Detw -Transport dimensions: 2840/1600/H2300 mm -Weight: 969 kg

Year of construction: 2003, condition: good (used), Turning device, turning station, turning table, rotary station, rotary table, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press -Manufacturer: WIMO Lifting Technology -Turning device: simultaneous turning of several stacks of circuit boards, or rotation of workpieces -Loading: loading and unloading from the front with a forklift -Maximum internal width: 4000 x 1700 mm -Maximum internal height: 580 mm -Minimum internal height: 250 mm -Load capacity: 6000 kg Gtjlhcdsyt Ncmow Dsw -Transport dimensions: 5960/2400/H2435 mm -Weight: 9000 kg

Condition: like new (used), Year of construction: 2025, Exhibition piece - Trade fair machine - Only a few operating hours - Gelhcdwjyr R I Is Djtw Offered at a special price Technical Data 300-P Inlet connection: 300 mm Rated motor power: 7.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. airflow: 6,000 m³/h Rated airflow: 5,089 m³/h Vacuum: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: Ex stock Bitburg Subject to prior sale Top condition - at a top price -

Condition: not inspected (used), functionality: unexamined, overall weight: 15 kg, total length: 400 mm, total width: 250 mm, total height: 230 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 04.05.26 and 07.05.26. Gtelhcsyr I Tnedw Djw MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 400 x 250 x 230 mm Weight: 15 kg External reference: 56

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 07-02275, total width: 420 mm, total length: 450 mm, total height: 950 mm, input voltage: 230 V, overall weight: 70 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 04.05.26 and 07.05.26. Gjlhcoyr E Atedw Djtw TECHNICAL DETAILS Tool holder: SK 40 MACHINE DETAILS Operating voltage: 230 V Frequency: 50/60 Hz Connected load: 50 W Dimensions & Weight Dimensions (L x W x H): 450 x 420 x 950 mm Machine weight: 70 kg External reference: Lot 1

Condition: used, Mechanization Infeed loading device consisting of 1 x conveyor belt with stop and pusher 1 x roller conveyor 1 x cross slide drive unit by means of servomotor For example, ideal for: A) In front of a planing machine with multi-blade saw Gtelhcjr Eh Uhsdw Dsw B) In front of resaw or other saw C) At the infeed of other machines Condition as is and without electric control Electric control on request and at extra cost.

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Gtjlhcdjxn Ax Asw Dsw

Year of construction: 2018, condition: good (used), Herding MULTICOATER MCI 55/1 dosing unit Manufacturer: Herding GmbH Filtertechnik Model: MULTICOATER MCI 55/1 Year of manufacture: 2018 Type: Dosing unit for filter coating Gelhcdsyrnd Tsw Djtw Supply voltage: 24 DC V Weight: 70 kg Weight: 130 kg Machine ID: 28696 Machine ID: 28697 CE marking: available Quantity: 2

Condition: excellent (used), Reversing clamp Manufacturer: Rückle Type: PKTW 2 Dimension: 5 x 1 x 1,5 meter Forkardt power chuck type FNC 315-65 Bore 65 mm Outer diameter 315 mm Further: Profile rail guide RUE 45 Gjlhcoin Ef Rjdw Dotw 4 centering and clamping units Integrated chip guide

Year of construction: 2025, condition: new, - Panel width 710 mm - Backgauge - Adjustable stroke Gtelhcdjh Ramgew Dew

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 280 h, load capacity: 1,500 kg, lifting height: 6,600 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Special equipment Load centre: 600 Mast type: Triplex Condition: As new Technical condition: Very good Gjlhceyty E Esdw Dotw Description: Machine fully workshop-checked, cleaned, UVV and inspection newly carried out!

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Gtolhcsytr Swodw Djw Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: new, Year of construction: 2022, Suction nozzle diameter: 180mm Nominal volume flow: 4200 m³/h Scavenging bag volume: 2 x 175 l Gslhcdsd Txblow Djtw Filter cleaning: manual Motor power: 3.8 kW / 400V Machine height: 1700 x 600 x 2400 mm (L x W x H) Weight: 69 kg

Condition: new, Year of construction: 2025, Suction nozzle diameter: 120 mm or 100 mm Nominal flow rate: 1900 m³/h Gslhcswhuufedw Detw Chip bag volume: 1 x 0.1426 m³ Filter cleaning: manual Motor power: 1.1 kW Machine height: 1000 x 500 x 1800 mm (L x W x H) Weight: 39 kg

Condition: ready for operation (used), CV Instruments THR-700E Hardness Tester Rockwell Digital Hardness Tester Test Force: 98.07 N (10 kgf) Test Force/Load: 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) Maximum Height: 170 mm Maximum Depth: 165 mm Gtslhcoytn Hksdw Dow Dimensions: approx. 215 mm x 500 mm x 750 mm (W x D x H) Weight: approx. 85 kg You are welcome to arrange an inspection. We can also organize a cost-effective shipping solution for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offerings. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications and errors in the article description are possible and subject to change.

Condition: good (used), Year of construction: 2018, Internal item no.: 25119 Mobile Surface Roughness Tester Gtelhcjyqzwkodw Dew Mahr Marsurf PS10 Year of manufacture: 2018 The measuring device is fully functional and can be inspected under power by appointment in a heated storage area of over 500 m².

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Geljyqr Sxshcdw Dotw

Condition: new, New Electric Belt Hoist SWF - PFAFF Silberblau Type ATHLO belt - BH203L3E Textile belt hoist, crane hoist with trolley Serial No.: 3540053G01007 Year of manufacture: 2003 (new - unused) Lifting capacity: 1,600 kg Hook path: 6 meters Main hoisting speed: 6.5 m/min Creeping hoist speed: 1.0 m/min Trolley travel speed: 10 / 2.5 m/min Distance from undercarriage wheel to load hook: approx. 450 mm Pendant control cable length: approx. 6 meters 3 load strands = 1,600 kg Main hoist motor power: 1.9 kW Creep hoist motor power: 0.3 kW Trolley motor power at 10 m/min: 0.25 kW Trolley motor power at 2.5 m/min: 0.06 kW Power connection: 400 Volt, 50 Hz - Emergency stop - Very quiet, low-maintenance, and safe operation - Trolley for I-beams, with 2 travel speeds - Suitable for I-beams with approx. 100 to 200 mm width - TELEMECANIQUE position limit switch type XCR Gtjlhcoypw Hredw Dew Space required L x W x H: 1100 x 700 x 600 mm Weight: 140 kg As-new condition – unused from stock

Condition: used, Year of construction: 2006, functionality: fully functional, 2 compressed air dryers from Farrag are available for sale; further technical information available on request. Original price approx. €6,500. Model 1: SCARD 100 Model 2: SCARD 70 Year of manufacture: 2005 Power: 3.1 kW Gslhcdevkdkiow Djtw

Condition: excellent (used), Electrohydraulic lifting device, linear drive, linear gear, lifting gear, spindle drive, electrohydraulic actuator for valves, valve drive, actuator, servo motor, actuating cylinder for rotor brake, disc brake, electrohydraulic disc brake, crane brake, electrohydraulic lifting device, lifting drive -Manufacturer: EMG Eldro Electro-hydraulic lifting device unused Gtjlhcov Hxw Aedw Dew -Type: Eldro Ed 80/6 -Item no.: 1045 2806 lifting drive Eldro Ed 80/6 -Stroke: 60 mm -Shaft: Ø 20 mm -Number: 4x lifting drive available -Price: per piece -Dimensions: 490/190/H255 mm -Total weight: 22 kg/piece

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. Golhcdwsp Stgns Dotw The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix Gjlhoh Aw Rnscdw Dotw The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.