Used Brake Bleeding Device for sale (25,621)

Condition: good (used), functionality: fully functional, Year of construction: 2001, control type: CNC control, working width: 3,000 mm, Machine Press force: 230 tons Bending length: 3060 mm Installation height, max. distance between lower edge: 535 mm Punch and upper edge die holder Press beam tilt: +/- 10 mm Clear frame passage: 2690 mm Throat depth: 410 mm Table width: 200 mm Working height with 100 mm tool height: 1050 mm Speeds: 200 mm/sec Y-axis: - Rapid traverse - Working stroke - Return X-axis: 500 mm/sec R-axis: 300 mm/sec Rjdpfx Ajyw Ubwjhvsbw Accuracy: Axis positioning deviation Y-axis: 0.01 mm X-axis: 0.04 mm R-axis: 0.08 mm Stroke lengths / Backgauge range Y-axis stroke: 365 mm X-axis travel: 600 mm Max. backgauge range in X: 860 mm R-axis travel: 250 mm Control: DA 65 Basic configuration Additional equipment Connected load: 38.5 kVA Electrical connection approx. Pneumatic connection: 6-7 bar Dimensions and weights: 3660 x 2310 mm Required space (length x width) Height: 3059 mm Weight (approx.): 18,210 kg Equipment: - Crowning - Bending aids - Back gauge

Condition: excellent (used), Year of construction: 2004, control type: CNC control, actuation type: hydraulic, controller manufacturer: Delem DA 65W, bending force (max.): 230 t, working width: 4,300 mm, stroke length: 350 mm, distance between stands: 3,700 mm, operating speed: 10 mm/s, number of axes: 5, travel distance X-axis: 1,000 mm, overall weight: 22,500 kg, total length: 6,000 mm, total width: 2,000 mm, total height: 3,400 mm, power: 25 kW (33.99 HP), Press brake DARLEY - EHP-LS 230 43/37 MACH-ID 9469 Make: DARLEY Type: EHP-LS 230 43/37 Control: Delem DA 65W Year: 2004 Max. bending length: 4300mm Distance between column: 3700mm Max. pressing force: 230T Beam stroke: 350mm Table Width: 250mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Crowning: yes Hydraulic toolclamping: yes Power: 25kW Length: 6000mm Width: 2000mm Height: 3400mm Rjdpsyvh S Tsfx Ahvobw Weight: 22500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Pressure: 130 t Bending length: 3150 mm Rjdsyvh Dvjpfx Ahvobw Distance between uprights: 2600 mm Motor power: 15 kW Control: CYBELEC VisiTouch Machine weight approx.: 10,900 kg Space requirement approx.: 3990x1750x2900 mm Equipment: - Controlled axes: Y1, Y2, X, R, Z1, Z2, X1 - Fully dynamic hydraulic crowning

Condition: excellent (used), Year of construction: 2000, controller manufacturer: Cybelec DNC 1200, bending force (max.): 2,000 t, working width: 15,400 mm, stroke length: 850 mm, distance between stands: 12,000 mm, operating speed: 8 mm/s, number of axes: 8, overall weight: 407,000 kg, total length: 15,400 mm, total width: 6,500 mm, total height: 11,400 mm, Extra Heavy Duty Pressbrake 1 set top tooling 88 Gr 1 set lower dies Cybelec DNC 106EC controller Y1,Y2,X,R1,R2,R3,R4,OWK Dynamic Crowning Lower Beam What kind off jobs built for: Shipbuilding & Naval like ; Hull sections, deck plates, bulkheads ribs Defence & Military; armored vehicle structures, reinforced structe hardox / strenx Mining and Heavy Equipment; dump bodies, crusher housing, excevator, chute liners Contruction and Fabrication; bridge giders, box columns, steel frames  On and Offshore; pilers, decks, spreaders, crane componenet, wind energy offshore parts Boiler an vessels; pressure vessels, power plant components, tower or pole section   Bending examples: 35 mm thickness at 10 meter length 26 mm thickness at 12 meter length 20 mm thickness at 15 meter length Max. bending length: 15400mm Distance between column: 12000mm Rjdpfoyvh Arjx Ahvobw Max. pressing force: 2000T Dis. Beam - Table: 1500mm Beam stroke: 850mm Troth beam: 1250mm Approch speed: 80mm/min. Working speed: 8mm/min. Return speed: 80mm/min. Number of controlled axis:10 Crowning: Yes Hydraulic toolclamping: Yes Power: 132kW Length: 15400mm Width: 6500mm Height: 11400mm Weight: 407000kg

Condition: good (used), Pressure 100 t Bending length 2050 mm Control CYBELEC DNC 880S Equipment/accessories: - axes controlled: Y1, Y2, X, R, Z1, Z2, X1 - hydr. Wila clamping on top Rbsdpfx Aholtk Uxevsw - motor. Crowning

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, Press force: 85 t Bending length: 2750 mm Upright width: 2260 mm Total power requirement: 17 kW Machine weight approx.: 8,300 kg Space requirements approx.: 3800 x 2300 x 2400 mm Accessories/Equipment: - 2 support arms in front of the machine - 2 backgauge fingers - Light barrier in front of the machine - Safety guard at the sides and rear of the machine - Die shift - 6-axis backgauge - Trumpf TASC 6000 control - Wila tool holder - Operating hours: 75,000 h Rsdpfx Aheyvhzuovsbw

Condition: new, functionality: fully functional, Comparable with Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 320 t (also available in many other configurations!) Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Y-axis stroke 400 mm Open height 650 mm Throat depth 450 mm Clear gap between frames 2555 mm Machine length 3785 mm Machine width 2290 mm Width without support arms 1740 mm Overall height 3100 mm Table height 920 mm Motor power 22 kW Oil tank capacity 300 l Machine weight 14,450 kg (Specifications may vary depending on equipment) Standard equipment: 3 CNC axes (Y1, Y2, X) Press beam double-guided, stable and precise Robust double-guided backgauge Backgauge fingers double-guided on linear rails Rbjdpfx Ajuf Nr Ajhvew Movable front arms with height adjustment Side and rear safety guards 60mm lower die adapter rail Manual upper tool clamping system (Promecam system) Foot switch with emergency stop 380 V, 50-60 Hz, 3 phase LED lighting Additional equipment: Delem DA 66t CNC control R-axis (backgauge) CNC controlled CNC-controlled crowning Fiessler Akas 2M laser safety device 2 additional backgauge fingers (total 4) 1 set of top and bottom tooling - Further processing lengths and capacities available upon request with appropriate accessories! -

Condition: ready for operation (used), Schallberger FacetteStar FS500 / 1000 Edge Milling Machine Chamfering Device Deburring Machine Travel: max. 500 mm Rbsdpfxsyw Rt No Ahvsw Depth Adjustment: 0-6 mm Speed: adjustable 1200 - 8000 rpm Weight: approx. 105 kg Dimensions: 870 mm x 490 mm x 1150 mm (W x D x H) You are welcome to arrange an on-site inspection. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued. The prerequisite is a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. All mentioned company names and trademarks are the property of their respective owners and are used only for identification and product description purposes. Deviations from stated technical data as well as errors in the item description may occur and are reserved.

Condition: refurbished (used), 1 x Elektronic Motor Braking Unit Rsdpfxsyvhfte Ahvobw Power range 3 - 15KW Voltage range 200-575V Power frequency 50Hz/60Hz Siemens EMG 15

Condition: good (used), functionality: fully functional, Year of construction: 2013, Used 3 meter CNC press brake from Durma Model: AD R 30135 Capacity: 3100 x 135 tons Year of manufacture: 2013 Rsdpoyvgqmjfx Ahvjbw Cybelec DNC 60 CNC control Akas Fiessler laser safety system Manual crowning 1 set of tooling from 1 to 6 mm

Condition: used, Bystronic Xpert 150 Brake Press with Bystronic CNC Control, 4100mm Bed, Max Force 1500kw, Max Stroke 215mm, Auto Back Stop 3 Axis, Bystronic Fast Bend Laser System. S/No. 11530057 (2011) Machine Weight 11,800kg. Country of Origin: Germany Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Rbjdpfx Ahjyid Efevjw

Year of construction: 2020, condition: as good as new (ex-display), 1x drive unit with trolley 1x travelling unit with trolley and height adjustment -Centric roller block adjustment with hand crank. -Manual height adjustment, locking with socket pin - height difference 0-350 mm adjustable Rodpsfxgrdefx Ahvsbw - Load capacity: 2.500 kg / unit - Component diameter: 200mm - 2.000mm - Rollers: PUR wheels - dim. length/width: approx. 1.900mm x 460mm - Chassis track width: 1435mm - turning speed: 0 - 2,000 mm/min - Operation: hand remote control and foot switch

Year of construction: 2023, condition: as good as new (ex-display), Technical data:- Load capacity: 1500kg- Own weight: 300kg- Insertable workpiece diameter: approx. 50 - 3000 mmm- Roll diameter: 250mm- Roll width 50mm - Rotation speed approx. 100 - 2,000 mm/min- Two-pedal foot switch potentiometer for stepless speed control Rbodpfx Aod Iuqlehvsw

Year of construction: 2020, condition: new, Height-adjustable turning device under load for the machining or assembly of turbine rotors, rollers or shafts. Load capacity: 20.000kg stroke: 400mm Redpfsfw Afkox Ahvebw Roller diameter: 350mm Applicable component diameter: D180mm - D900mm Track roller material: TEXMAT-500

Year of construction: 2022, condition: new, Technical data: - load capacity: 10.000 kg - Own weight: 850kg - Insertable workpiece diameter: 50 - 3500 mm - Roll diameter: 250mm - Roll width 160mm - turning speed approx. 100-2.000 mm/min - Two-pedal foot switch Rbedpfxjfxw H Aj Ahvjw - Potentiometer for infinitely variable speed control

Year of construction: 2023, condition: as good as new (ex-display), Technical data:- Load capacity: 15000 kg- Own weight: 960kg- Insertable workpiece diameter: approx. 50 - 3200 mm- Roll diameter: 250mm- Roll width 240mm - Rotation speed approx. 100-2,000 mm/min- Two-pedal foot switch- Potentiometer for stepless speed control Rbjdpfx Ahsd Iuqasvew

Year of construction: 2023, condition: new, Rotating device for a component load of 40.000kg. Applicable component diameter: 500mm-6.000mm. Rotating speed 100-2.000mm/min. Rodpoflmcxsfx Ahvobw Control via hand remote control (radio control on request).

Condition: ready for operation (used), Year of construction: 1991, Immediately available ex works: CNC press brake Amada Promecan Model HFBO 125/40 Year of manufacture: 1991 Control system renewed in 2024 Delem DA 58 control Pressing force: 125 t Working length: 4200 mm Frame gap: 2700 mm Throat depth: 410 mm Stroke: 180 mm Drive: 11 kW Working speed: 8 mm/s Rbsdpfx Ajyw Nazshvew Weight: 10 t Many tools included Price: EUR 10,500— plus VAT, ex works

Condition: good (used), Year of construction: 1987, Press force 1250 t Bending length 15000 mm Upright spacing 10160 mm Rbodpfx Ajyw I Drjhvew Control system CNC 10 graphics Throat depth 770 mm Table length 15000 mm Machine weight approx. 230 t Required space approx. 17000 x 5400 x 5900 mm Additional information: - Press force: 1,250 t - Bending length: 15,000 mm - Control: CNC 10 graphics - Number of controlled axes: at least 10 - Upright spacing: 10,160 mm - Throat depth: 770 mm - Table length: 15,000 mm - Dimensions: 17,000 mm x 5,400 mm x 5,900 mm - Weight: approx. 170 t Equipment: - Crowning device - CNC 10 graphic control - Hydraulic upper tool clamping - Multi-operator functionality - Increased speeds - Automatic, height-adjustable rear sheet gauge - Draw cushion device - Horn length on each side: 2,200 mm

Condition: refurbished (used), Year of construction: 2001, AMADA MODEL HFE 130-3 130 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 130-3 downstroke CNC Press brake Year 2001 Tonnage 1300 KN Rsdpfothgidex Ahvebw Type OP 2000 CNC Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity 110 LITRES Motor Power 11 kw Weight 7800 KG kg CNC Control Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Year of construction: 1994, CNC press brake Manufacturer: Blemas Model: 100-33 Year of manufacture: 1994 CNC control: Cybelec DNC 74 PSG Press force: 100 t Working width: 3 m Weight approx.: 8 t Rbodpeyvfkljfx Ahvew Dimensions approx.: 3,600 x 1,600 x 2,600 mm

Condition: new, For sale: professional MOTEK electric motor with brake. Brand-new unit, warehouse stored, never installed. Italian production – very high manufacturing quality. Rsdpfx Ahjyvadmovebw The motor is fitted with an electromagnetic brake – ideal for industrial applications, machinery, conveyors, pumps, and drives. Technical specifications: Manufacturer: MOTEK Model: ET90SLa-2 Power: 3 kW RPM: approx. 2800 Voltage: 230 / 400 V Frequency: 50 Hz Current: 11.9 A / 6.9 A Power factor (cos φ): 0.81 Brake torque: 7 Nm Brake supply: 103 VDC / 230 VAC Duty cycle: S6 40% Weight: approx. 16.2 kg Country of manufacture: Italy Condition: New, warehouse stored Possible minor signs of storage

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: TO5_1, control type: CNC control, degree of automation: manual, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 5 t, working width: 350 mm, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 2, type of crowning: manual, back gauge adjustment: CNC-controlled, overall weight: 375 kg, power: 3 kW (4.08 HP), warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Rsdpeyu Uwxofx Ahvobw Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: used, Year of construction: 1986, Gebruikte conventionele kantbank van 4 meter Type: PPH 40160 Capaciteit: 4100 x 160 ton Elektrische achterasverstelling Rbsdpfx Ahoyu Stdovsw Elektrische diepteverstelling 1 set gereedschap

Condition: as good as new (ex-display), functionality: fully functional, Equipment: CE marking, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, Hydraulic press brake with 4-axis backgauge. Demonstration machine, available immediately. German hydraulic pump with servomotor, highly efficient. Promecam tool holder, tooling included. Rbedsywz Dxspfx Ahvow