6
Feeding technology / Feeding system / Vibratory feeder / Sorting device / Bowl feeder
vibratory bowl, sorting device / screw feeder with vibratory feeder for screwdriving technology
Feeding system DEPRAG Type: 0622-P/0,75-1S
No: 1183884 2011 - 2012
The system was used for feeding of electrical plug contact pins.
Product dimension: Ø 4 mm, length 26 mm
The pins are pre-saturated in the material hopper, the feeding belt conveys the pins to the spiral conveyor as required.
From the spiral conveyor ...
8
RNA 900 mm diameter vibration feeder, component feeder / ct1339a
In good condition, for sale with ESR3000 controller.
Manufacturer: RNA
Type: SRC-N 630-1 L
Vibration frequency: 50 Hz / 3000 min - 1
Voltage: 220 V
Power: 5.4
Diameter: 900 mm
A = Output height: 167mm
Cbfiervbkp
B = Trail width: 50mm
D = Bowl diameter: 980mm
H = bowl height: 250mm
S = Track division: 81mm
14
Sortimat SMKF600L Bowl feeder
The vibratory feeder is in very good condition. Installed by Sortimat in a white soundproof cabinet.
Bowl feeder approx.Ø: 950mm
Total height (spiral conveyor): 580mm
Discharge height (spiral conveyor): 540mm
Outlet length: 250mm
Technical data sheet
Complete factory closure,
wide range of storage platforms, pallet racks, shelf racks, paternosters.
Pknut
High quality industrial machines, lathes, grinding machines, hand machines
Further articles - new and used - ...
11
Sliding round vibrator, Fabr. Rösler, type centrifuge Z800, YOM 1999, Ser. -No. 59 829, 5 kW, inner drum Ø 382 mm, load max. 40 kg, throughput max. 1,200 l/h, wastewater treatment plant, Fabr. Rösler, type Z800HA TurboFloc, Ser. -No. 3996/07, best. from: dirty water tank, centrifuge, YOM 2013, Clear water tank, YOM 2007, operating hours. 63,400
B9oyqk3ml0
15
For sale are various spiral conveyors
255 r
260 r
380 r
Machines purchase / sale
PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC.
Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours?
For more information or to contact us, please visit our website
B7ykagcae8
Discover more used machines
12
Sortimat SMB300R Bowl feeder
The vibratory feeder is in very good condition. Installed by Sortimat in a white cabinet with three frequency controllers.
Year of manufacture 11/2017
Machine number F 224420
Type designation SMB 300 R
Electrical connection 200V
Rated frequency 50Hz
Rated current 2.9A
Yzfljq7n
Complete factory closure,
wide range of storage platforms, pallet racks, shelf racks, paternosters.
High quality industrial machines, lathes, grinding machines, hand machines
Further artic...
12
For sale are various spiral conveyors or also vibratory bowls
600 R for 3 000 €
400 R for 2 500 €
and
2* 260 L for 2 000 €
The equipment is in good- very good condition
All prices plus VAT
Machines purchase / sale
PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC.
Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours?
Bif22c00
For more information or to contact us, please visit our website
8
SIM SF 500 Bowl feeder
Dbqfw8tzs
The bowl feeder drive consists of a connecting plate and a counterweight. These are coupled to each other via spring assemblies. The spring-mass system is set in vibration by means of electromagnets. Vibration decoupling from the machine frame is ensured by rubber buffers. The bowl feeder attachment is easily detachably connected to the drive via edge clamps or a central mounting.
Technical data
Vibration t. 6000 min
Mains voltage 230V 50 Hz
1980 VA
(Change...
10
Feeder Caps 8006 automatic disc feeder, sorting machine
Fully automated, variable dosing speed, manual height adjustment. Stainless.
Year of production: 2003
Svffkk
Power: 0.55kW
max. dosing capacity: approx. 1000 pcs / min
Diameter: 1400mm
Siemens control.
Purchase of industrial equipment and machinery.
Wide Range of Used Machinery, Industrial Equipment
1
Delivery belt
Cwjdbd7q
15
• The Fabo Wobbler feeders are designed to feed sticky, wet and large materials comfortably and clean to the crusher with an ellipse-shaped bar and unique motion mechanism. With its self-cleaning structure, it eliminates the problem of obstruction and stone compression.
• Work with wet and sticky materials without clogging and jamming.
• Adjustable feed rate.
• It occupies less space and has smaller height.
• It works without dust, vibration and noise.
• Low power consumption and maintenance fre...
9
Vibrating feeder bunkers which are used to feed the crushers in our stone crushing lines .Vibrating f
eeders are placed before main crushers, primary impact crushers or jaw crushers to get the desired size and to reduce the costs of intermediary crushers, to increase the capacity of the facility, to achieve continuity in the plants and to enhance a homogenous distribution. To mention some advantages of these bunkers; sudden ejections and waiting times occur at main crushers, during this time the...
2
Operating temperature: 110c
Pressure difference: 50kPa (0,5 bar)
Clearance: 0,70 mm
Filling grade: 20%
Capacity: max. 20m3/h
Power: 4 kW/400V/50 Hz
Pv2qia
Rotary Feeder Laitex 500/400 - HST in very good condition.
8
For sale an excellent condition 30-100 kW Hargassner WTH 100 wood chip / pellet boiler with automatic control
- One of Austria's largest manufacturers is Hargassner's boiler
- Environmentally friendly clean energy with the comfort of gas heating, but for the price of a fifth!
- 2003 production in excellent condition, can be put into operation immediately
- Suitable for fully automatic heating of rooms up to 300-1000 m2, with the comfort of gas heating but at a third / fifth price
- Complete scr...
8
Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4
WITH DELIVERY BELT
Return belts
Caoba9j2ba
For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt
Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards.
CONNECTION TO PRINTING MACHINE
The STENZ FEEDER does not need synchronization. The feeder is guided by the handles
the pressure machine and sets the required height with the...
12
Weinig feeder and stacking
TECHNICAL SPECIFICATIONS:
Material feeding system:
chain width 5000 mm
minimum material length 700 mm
B8r7x3xy9r
chain length (depth) 2500 mm
hydraulic feed
upper pneumatic pressure rollers
four lower pull rollers
3 lower auxiliary rollers
Stacking system:
length of feed rollers 9200 mm
32 lower pull rollers
package width up to 6300 mm
length (depth) of stacking of the package 1200 mm
package height 1300 mm
package receiving pulling rollers
9
• The Fabo Wobbler feeders are designed to feed sticky, wet and large materials comfortably and clean to the crusher with an ellipse-shaped bar and unique motion mechanism. With its self-cleaning structure, it eliminates the problem of obstruction and stone compression.
• Work with wet and sticky materials without clogging and jamming.
• Adjustable feed rate.
• It occupies less space and has smaller height.
• It works without dust, vibration and noise.
• Low power consumption and maintenance fre...
4
Esc Progress 700 1990 year
fully-automatic cylinder screen printing machine with Mirus F II front pick-up sheet feeder
2t2zxm
Dryer Aeroterm Vario 4 Year 2009
max. printing size:
700 x 1000 mm
10
Lenght: 2.1 m
Width: 1.3 m
Height: 0.70 m
Drive gear motor: 3-phase 230/400V, 50-60 Hz
Capacity: 5 - 220 000 liters/h dry solids in powder or granular form
Lenght (bunker): 2.3 m
Width (bunker): 2.2 m
Height (bunker): 6.6 m
Electric motor (bunker): 4.6 kW
B8hjifmdjb
The Tomal Feeders are volumetric multi screw feeders for safe discharge and accurate metering of solids. With the unique construction the Tomal multi screw feeders are suitable as metering devices for both granular and arch forming m...
10
diameter: 1700mm
Xgeew
Stainless steel
Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4
WITH DELIVERY BELT
Return belts
For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt
Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards.
CONNECTION TO PRINTING MACHINE
The STENZ FEEDER does not need synchronization. The feeder is guided by the handles
the pressure machine and sets the required height with the crank.
Imp...
14
Includes 4 full bins, one on top of the other,
empties them one by one and closes the gaps one on top of the other.
Empty bins every 4 seconds
Capacity up to 120 bins / hour
Byiwy3eg78
11
• The Fabo Wobbler feeders are designed to feed sticky, wet and large materials comfortably and clean to the crusher with an ellipse-shaped bar and unique motion mechanism. With its self-cleaning structure, it eliminates the problem of obstruction and stone compression.
• Work with wet and sticky materials without clogging and jamming.
• Adjustable feed rate.
• It occupies less space and has smaller height.
• It works without dust, vibration and noise.
• Low power consumption and maintenance fre...
7
Length: 2.1 m
Width: 1.3 m
Height: 0.70 m
Drive gear motor: 3-phase 230/400V, 50-60 Hz
Capacity: 5 - 220 000 liters/h dry solids in powder or granular form
Number of screws: 7
B8sceirs0i
Electric motor: 5.5 kW
The Tomal Feeders are volumetric multi screw feeders for safe discharge and accurate metering of solids. With the unique construction the Tomal multi screw feeders are suitable as metering devices for both granular and arch forming materials.
Swedabo AB offers used and new conveyor systems...
10
Equipment / Additional information:
Delivery belt
Designed for heavy-duty use at maximum printing speeds.
Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap.
The...
15
• The Fabo Wobbler feeders are designed to feed sticky, wet and large materials comfortably and clean to the crusher with an ellipse-shaped bar and unique motion mechanism. With its self-cleaning structure, it eliminates the problem of obstruction and stone compression.
B8tyb0jrhg
• Work with wet and sticky materials without clogging and jamming.
• Adjustable feed rate.
• It occupies less space and has smaller height.
• It works without dust, vibration and noise.
• Low power consumption and main...
11
• The Fabo Wobbler feeders are designed to feed sticky, wet and large materials comfortably and clean to the crusher with an ellipse-shaped bar and unique motion mechanism. With its self-cleaning structure, it eliminates the problem of obstruction and stone compression.
• Work with wet and sticky materials without clogging and jamming.
• Adjustable feed rate.
• It occupies less space and has smaller height.
• It works without dust, vibration and noise.
• Low power consumption and maintenance fre...
9
Trough size: 600x3000mm
Total core: 1600mm
E33nki0n
Year of manufacture: 2019
3
6 sliders, shaft D 25 mm
was attached to Schütte S 32 PC
Bk0ulmp
4
Feeder for signatures with laps to be bound
Z8fowcb
15
Welcome,
Here is some useful information about the feed:
* 4 pull rollers
* Forward and reverse rotation.
* Adjustment of working speed on the switch and chains.
* motor power 0.75 kW (three-phase)
* Speed from 4.0 to 2 m/min.
* Weight approx. 70 kg.
* 2021 year of production
* Complies with CE standards
As I mentioned, the feed is brand new, complete, never used and unpacked only to take pictures.
You will meet carpenters on site who will be happy to pass on their knowledge and experience w...
5
Feeding technology, feeding device, storage container with automatic feed, spiral conveyor, vibrating bowl, vibration conveyor, orbital conveyor
3cs0mcqf
-Automatic feeder with storage container
-without rivet gun
-is sold as a spare part carrier
Falzmaschine / Folding Machine (Pharma-Fold) Multipli 384SBaujahr / Year 1994 - Serial-No. 21083
Unterflur-Sauganleger / Non-Stop Feeder
Anleger Format / Feeder Size min. 5x7cm - max. 37,5x50cm
Leistung / Output max. 220m/min
Papiergewicht / Paper weight 40-200g/m2
4 Taschen 4 Bogenweichen / 4 Buckles 4 Deflectors
2 Kompressoren / 2 Compressors
Schuppenauslage / Stream Delivery-Online-Video-Inspection by Skype-Video-
B983lrtnsx
-We would be very pleased with your visit - more machines on...
12
Trough size: 580x1800mm
Cbukjqn9yk
5
offer consist of:
Cmbfpawe
- cover feeder CF-20
Horizon CF-20
cover feeder
- compatibel with:
Horizon AC-6000
Horizon AC-8000
We can also organize the following for you:
packaging, loading, transport ( by ship or plane) including customs
9
Movable bowl Diosna W 240 for wendelmixer
Inside diamensions: 96 cm diameter, 57 cm height
Bpfco9hgx7
4
Catalog No. : 5413
Type: SN 542
Producer: FEDEK
Made in: 2008
Buvq83xy0n
Characteristic:
Maximum bar length: 3000 mm
Bar Diameter: 42 mm
Weight: 800 kg
Length: 4000 mm
Width: 1000 mm
Height: 1500 mm
8
Code: 0727
Brand: SCM
Cbromayxl3
Model: T 130/LL
Spindle moulder with long table and feeder
Technical data:
Table dimensions mm 2500 x 740
Table height mm 910
Spindle speed rpm 3000/4500/6000/7000/10000
Shaft rotation reversal
Motor power Hp 5,5
Adjustable fence with stops
Suction mouth diameter mm 120
4-wheel feeder with manual tipper
Overall dimensions mm 2570 x 900 x 1200 h
Weight kg 790