Used Bolt Gun for sale (3,285)

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Dkodpfszzz Ivex Aiijw Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: excellent (used), Year of construction: 2013, 4mm Dia. - 16mm Dia Range of Drilling; Up to 3,000mm Length of Component; Double Axis; Overall Length Approx 11 Metres x 900mm Wide, (2) Sections - Headstock Bed Length Approx 5 Metres, Drilling Length Bed Approx 6 Metres; (1) 500mm Dia 4-Jaw Chuck, Dkedpfx Asy Ey E Reiiew 120mm Bore with Troyke DL-20-B, 4th Axis, 500mm Dia. Precision Rotary Table; Pendant Control; Stand Alone Electrical Cabinet (Dimensions Approx 3,000mm x 500mm x 1,900mm High); Technidrill Coolant Filtration System consisting of LNS 'Turbo HB' Swarf Conveyor, FSI 'CBFP 11' Filter System & Oil Tank with High Pressure Delivery Pumps; Stand Alone Dimplex Koolant Koolers Chiller Unit with Controls (Dimensions Approx 700mm x 1,300mm x 1,850mm High, 2012);

Condition: excellent (used), Evaporator Guntner -Type: S-GHN 081B/37 -Cooling capacity: 82.3 kW at DT8, 63.7 kW at DT7 -Fin spinning: 7 mm -Fans: 3 x 810 mm -Dimensions: 5450 x 1000 x 1300 mm -Refrigerant: Freon -Volume: 112 L Dsdpfx Aowhunxeiiokw -Weight: 619 kg -Quantity in stock: 1 -Reference number: CH 548 -Condition: Used in good condition

Condition: used, Year of construction: 1968, functionality: fully functional, machine/vehicle number: M10L/8556, Offer Number: M10L/8556 Machinetype: boltmaker 4 die 4 blow Info: bushing cut-off , PKO Make: NEDSCHROEF Type: HPT6 Constr. year: 1968 diameter range: 10-24 mm number of dies: 4 number of stations (incl. cut off): 7 cutting length: 200 mm shaft length under head: 160 mm output - pieces/min: 60 Dsdpfx Aswi Uc Ssiiokw max. thread length: 95 mm max. width acros flats: 32 mm press power: 350 to Location: In our warehouse

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: M10L/8539, Offer Number: M10L/8539 Machinetype: boltmaker 4 die 4 blow Info: Closed cutter , IFO , PKO , with thread roller and pointer Make: NEDSCHROEF Type: BL4 Constr. year: 1984 diameter range: 6-16 mm number of dies: 4 number of stations: 7 cutting length: 340 mm shaft length under head: 65-300 mm output - pieces/min: 60-90 max. thread length: 65-150 mm Dksdpfx Aijwi Sxkjiow press power: 150 to max. width acros flats: 22 mm Location: In our warehouse

Condition: used, Year of construction: 1996, Overview This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is still in production and be viewed in person. Techn. Details   Capacity:  10,000 bph Min/ Max: 5,000 bph – 13,000 bph Bottle type: 0,5L, Euro, NRW Bottles per row: 10 Bottles in the machine: 1,980 Bottle cell carriers: 204 Dimensions:  Length: 8,100 mm Width: 1,395 mm Height: 2,300 mm (without feet) Weight: approx. 9,210 kg Water consumption: 4,0 - 4,8 m³/h Heat consumption 80°C: 700 - 840 kJ/ h x 1000 Electrical consumtion: 17 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Dedpju H R Nnjfx Aiiekw

Condition: good (used), Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Röhm, four-jaw chuck Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 133 mm Dkjdjtxklyopfx Aiisw -Mounting: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Accessories: incl. 2 sets of interchangeable jaws and clamping tool -Dimensions: Ø200 x 185 mm -Weight: 24 kg

Condition: used, Year of construction: 1993, Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data - Manufacturer: Klinger - Type: BC 16/1 - Year of manufacture: 1993 - Application: Returnable glass bottles - Material: Full stainless-steel construction - capacity: 20.000 bottles/h Features - Complete stainless-steel construction - Steam extraction system - Finger infeed and finger discharge - Chemical dosing system - Rotating spray pipe system - Lauer control panel - Conductivity measurement - Stainless-steel filter inserts Dodpfxsyb Sxas Aiiokw - Plate heat exchanger - Compatible with standard bottle formats

Condition: new, color: grey, Empty weight: 35.000 kg Dimensions (LxBxH): 360 x 360 x 1250 cm Cargo space capacity: 384.000 l Number of fillers: 2 500 Tonness CAPACITY BOLTED CEMENT SILO TECHNICAL SPECIFICATIONS SILO CAPACITY 500 TONS, 385 m³ (cement density as 1,3 ton/m³) Dodpfoygk Auex Aiijkw SILO HEIGHT 19.945 mm SILO DIAMETER Ø 6.180 mm QUANTITY OF SILO LEGS 6 SILO OUTPUT DIAMETER Ø 300 mm NUMBER OF COMPONENTS 250 SILO WEIGHT 28.000 kg(Wtih Legs:35000kgs) MATERIAL OF SILO LEGS Ø273 x 12 mm STEEL PIPE SUPPORTS OF SILO LEG NPL 80 mm CORNER IRON SHEET METALS OF SILO LEG 20 mm CONICAL PART SUPPORT MATERIAL 200 mm STEEL C CHANNEL CONICAL PART MATERIAL ST- 37, 8 mm SHEET METAL SILO BODY MATERIAL ST -37, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL ST -37, 6 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG INNER MANHOLE IS PRESENT OUTER MAN HOLE IS PRESENT SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS. Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 140 microns

Condition: new, Year of construction: 2026, Approx. 360 starter bays (more available on request), boltless shelving racks, plug-in system, manufacturer: dalminels, dimensions: 1.30m x 0.60m (other sizes available), frame height: 2.20m (other heights available) – New equipment: Price per starter bay: €119 (net) Price per extension bay: €99 (net) Purchase only by the truckload, otherwise the transport costs may be disproportionately high! Approx. 360 bays fit per truckload (depending on configuration). Manufacturer: dalminels, Italy Model: Errex Year of manufacture: New Dkedpjyhxmnefx Aiijw Finish: Galvanized Frame height: approx. 2.20m (other heights, e.g., 2m available on request) Load capacity per level: 141 kg 5 shelves per bay – additional shelves available at extra cost Shelves approx. 1.30m x 0.60m (shelves consist of 3 panels, each 20cm deep) This system features shelves that slot into rails on the sides. Condition: New delivery time: approx. 4 weeks, usually faster – please inquire for current lead times! Location: Delivery included within Germany Other shelf sizes available on request: For example: Widths: 1m and 1.30m Depths: 30cm / 40cm / 50cm / 60cm / 70cm / 80cm Accessories available at extra cost: e.g., drawers, dividers, bracing beams as an alternative to cross braces, etc. Also available as multi-level installations!

Condition: used, Condenser Guntner Dkjdpfx Asxg Nhboiijw -Type: GVH 090.1B/2x4-S(D) -Cooling capacity: 477 kW / 399 kW -Number of fans: 8 x 900 mm -RPM: 440/350 -Dimensions: 9700 x 2290 x 1850 mm -Volume: 218 L -Quantity in stock: 1 -Stock number: SK 169 -Condition: Used in very good condition

Condition: new, Siemens 6RA4001-1AA01 Simodrive Power Supply < unused > in opened original packaging, 100% functional. Dodpfxoxagwas Aiiokw

Condition: ready for operation (used), Siemens 6SC6100-0GC11 AC-HSA FBG power supply 462 010.9062.11, used, minor signs of use, 100% functional, scope of delivery as per photos Dkjdsxagz Sspfx Aiiew

Condition: ready for operation (used), Bosch VM 60 / 150 power supply module 1070046009-112 SN:275136, used, normal signs of use, 100% fully functional, delivery as shown in photos. Dkjdjx Eqzpepfx Aiiow

Condition: ready for operation (used), Bosch VM 60-T / Power Supply / Supply Module SN: 640903, used, in good condition, 100% fully functional, delivery scope as per photos. Djdpfx Ajx Eq Agjiiskw

Condition: ready for operation (used), Marposs power supply, used, normal signs of wear, 100% functional, scope of delivery as per photos. Djdpfx Asx Et Ifeiiokw

Condition: as good as new (ex-display), Year of construction: 2025, Immediately available! Dkodpfof A Eg Djx Aiiew Tank capacity: 192 L External dimensions: 1330 x 945 x 1490 mm Usable dimensions (internal): 680 x 435 x 330 mm Load weight: 80 kg Ultrasonic frequency: 40 kHz Ultrasonic power: 1200 W Bag filter: Yes Automatic filling: Yes Discharge via pump: Yes Insulated lid: Yes

Condition: like new (used), 2,500 m² Schaefer R3000 storage racking system, 2-3 tiers Used, top condition, like new, see pictures Manufacturer: SCHÄFER R3000 CAD planning and installation 2-3 tiers Price on request! Partial sale possible Negotiable price: on request! Goods are in stock and promptly available Transport and installation possible on request. Inspection possible at any time by appointment. Further information on request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse) Dkjdpfefiqhlox Aiisw Lenox Trading – Top storage technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly turnover of 30–50 semi-trailer loads for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving units, tire racks, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and installation. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS AREA: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including thorough cleaning and removal. 2. Commission auction: Carrying out auctions on behalf of clients. Our full service is provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and thorough cleaning and handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 2,165 mm, loading space volume: 56 m³, Equipment: ABS, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width: 1,600 mm Dkjdpfx Aefi Nmusiijw Axles and suspension: Disc brake 430 mm Jost (formerly Mercedes DCA) axle units, 3 x 9 tons, with air suspension, air springs arranged centrally to the chassis longitudinal beam. First axle can be lifted with starting assist and manual forced lowering. Smart Board information center, lift/lower valve, BVA brake wear indicator. Tires and wheels: 6 wheels with tires size 385/65 R22.5, from various manufacturers (manufacturer's choice), with steel rims 11.75 x 22.5 ET 120. Fifth wheel: Mechanical version with single-sided operation in 2 speeds with pivoting base for air suspension. Braking system: According to E.G. standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS incl. RSS (Roll Stability System) and Premium modulator, Wabco Smartboard information center, aluminum air tank system. Electrical system: According to STVZO guidelines, with 2 five-chamber lights, type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x5-pole sockets, with side marker lights, 2 separate LED rear lights, 1 LED interior light. Tipping body/dump bed: Internally fully welded. Aluminum dump bed, side walls with 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide. Floor made of 8 mm thick, highly wear-resistant alloy (5383H34/HB 110). Front wall reinforced, 4 mm thick, in a straight design. Rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 configuration, with a grain slide, or alternatively in a 1/2-1/2 configuration with a grain slide on each side. Aluminum round profile welded on the side and bottom for sealing the door gap on the rear doors. Rear doors partially covered with smooth aluminum. Operation of the universal door automatically pneumatic with separate lever that can be locked. Rear supports made of aluminum, can be swung out. Two retaining straps with rubber buffers on the tipping body, attached to the frame at the front wall. Hydraulic system: Tipping cylinder with large cylinder body Hydraulic cylinder mounted on the front wall with a max. working pressure of 150 bar, manufacturer Edbro, with approx. 2.5 m hydraulic hose and quick-release coupling 1", tipping angle approx. 48 degrees. Accessories: 6 Parlok fenders, complete mud flaps covering the entire vehicle width attached to the U-profile. Aluminum spare wheel holder. Folding side impact protection on the right side. Large tool box, type 860. Approx. 3 m aluminum ladder. 3 aluminum swing supports mounted centrally, approx. 150 mm higher. Additional centrally mounted support receiver for positioning a total of 2 supports to increase the loading width. Tarpaulin with a central light strip and separate reinforcements in the wear areas, approx. 660 gr./m2 quality, with tarpaulin system. Circumferential rubber rope in the rear end of the tarpaulin to be attached to two tension hooks on the rear swing support. Walkway on the frame in chassis color. Tarpaulin closure with quick-release fastener. Tarpaulin end at the rear with welded-in rubber rope to prevent water ingress. Robust folding underrun protection with two towing eyes left and right incl. locking pin. 2 "Clear-Pass" mud flaps on the fender according to EG standard, attached to the frame on the side. Aluminum grain chute with tarpaulin bag attached to the frame on the side. Holder for s

Condition: new, Industrial belt sander Scantool 75 x 2000 with integrated dual dust extraction system Sanding belt 75 x 2000 mm Dkodpfx Aisflt Amjijw Working width: 75 mm Motor: 4.1 HP Speed: 34 m/s Table height: 475 to 1240 mm Sanding belt dimensions: 75 x 2000 mm Platen size: 530 mm Weight: 100 kg The Scantool industrial belt sander models with dual dust extraction system, 75 x 2000 and 150 x 2000, are powerful, high-quality machines built to the strictest environmental and safety standards. The belt sanders are equipped as standard with a motor brake, adjustable work height, eye protection, angle stop, and motor protection switch with zero-voltage release. This low-noise machine with CE marking is ideally suited for sanding all metals. Motor protection switch with zero-voltage release Separate emergency stop Motor brake Adjustable angle stop Eye protection The continuously adjustable work height enables an ergonomically correct working position. Perfect design for fast, efficient, and safe sanding. Self-adjusting belt tension. Danish top quality.

Condition: new, Year of construction: 2023, Automate your cleaning process with devices from the Superior series: lifting device with a support grid for effortless handling of parts, filter systems for dirt separation, an exclusive oil separation system (OPS), and an intuitive touch panel. Standard models are available from 150 L to 8000 L. Dodpfx Aief E Nt Djiskw TECHNICAL CHARACTERISTICS External dimensions of the machine: 2,140 x 1,540 x 1,720 mm Internal dimensions of the tank: 1,300 x 794 x 670 mm Usable dimensions of the parts grid: 1,270 x 685 x 470 mm Maximum load: 400 kg Height of the worktop: 980 mm Tank capacity: 692 L Power of the ultrasonic generator: 4,800 W Ultrasonic operating frequency: 28 kHz Heating element: 12 kW

Condition: ready for operation (used), Siemens 6EV2031-4CC power supply, internal mounting power unit. A 626 017, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dkodpfoi Edvaox Aiiow

Condition: ready for operation (used), Siemens 6EV2031-4EC power supply, installation-ready unit. A 626 611, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dksdpoi Edvlefx Aiiew

Condition: ready for operation (used), Siemens 6EV2031-4EC power supply, installation-ready unit. A 626 798, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dedpei Edvpofx Aiiokw

Condition: ready for operation (used), Siemens 6EV2031-4FC00 power supply, internal mounting power unit. A 629 001, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dkodji Edvtepfx Aiiew