Used chaff cutters for sale (47)

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 1,030 h, overall weight: 1,800 kg, Jensen A425 / Wood Chipper / Shredder / Chopper / Ø 20 cm • Manufacturer: Jenzen • Type: A425 • Year of manufacture: 10/18/2016 • Operating hours: 1030 hours Gbolhcszipw Uecqrer • Brushwood shredder • Wood chipper • Shredder • Chopper • 2x knives, new • Front bearing, new • Flange shaft, new • Clutch for storage unit, new • Diameter of knife discs: 73 cm x 3 cm • Number of knives: 2 • Discharge chute, 360° rotatable – deflector flap, infinitely adjustable • Infeed opening: 24.5 cm x 20 cm • Stem diameter: 20 cm • Cutting length: adjustable from 5–20 mm • Chopping capacity: approx. 20 m3/h • Max. speed: 1000 • Permissible support load: 75 kg • Transport length: 1.20 meters • Transport width: 90 cm • Transport height: 2.10 meters • Total weight: 1800 kg • German machine • Immediately ready for use • This offer is non-binding and without obligation. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: new, Year of construction: 2023, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at [phone number]). Seppi M. BMS 125 forestry mulcher / DEMO unit / Year of manufacture: 2023 / in stock & immediately available Price: €28,290.00 net / €33,665.10 gross - Working width: 1.25 m - Overall width: 1.56 m - Depth: 1.11 m - Height: 0.85 m - Mulcher for excavator attachment - Ideal for mulching in hard-to-reach areas such as roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches bushes and wood up to 30 cm in diameter - For excavators from 13 to 30 tons - For mounting on various attachment plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier machine - Indirect V-belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Forged counter blades - Hydraulically adjustable rear hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Support skids in sandwich construction, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 rotor with fixed tools with inserts made of tungsten carbide - 1 x MONO EXTREME V-LOCK L, part number 19702266 - 33 x MONO TIP V-LOCK, part number 19702259 - 1 x MONO EXTREME V-LOCK R, part number 19702267 - Wear-resistant tool holder - Interchangeable rotor stub shafts OPT 465 M-BOOST bevel gear piston motor - With automatic displacement regulation 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 80 - 170 l/min 3 hydraulic lines are required: feed, return, and drainage. The unit is supplied without hoses, fittings, and attachment plate. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, which are immediately available! Mr. Herden (Tel. [phone number]) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Gbslhcoznrvqecqrjr We supply the complete Seppi M. product range for you! Errors and prior sale excepted! Please contact Marius Herden for further information.

Condition: used, functionality: fully functional, Year of construction: 2014, maximum speed: 80 km/h, overall weight: 1,800 kg, empty load weight: 1,800 kg, operation weight: 1,800 kg, mobility: mobile, machine/vehicle number: 3314051396, The machine runs perfectly. If you have any questions, feel free to call us. Price: €10,710 incl. VAT, €9,000 net (export) • Machine Manufacturer: Jensen Model: A425DI Type: engine-driven chipper / wood chipper Designation: SDAH work machine Serial number: 3314051396 Additional ID: 6412 0899 First registration: 16/06/2014 • Technical specifications Feed system: hydraulic feed with two rollers Maximum log diameter: approx. 200 to 220 millimeters Chipping system: disc chipper Discharge: rotating discharge chute Gbolhccjy Amidsqror • Engine Engine type: diesel Type: ATZ Power: 24.3 kW • Dimensions and weight Weight: approx. 1,800 kilograms Chassis: trailer Hitch: car trailer hitch • Features Hydraulic feed with forward and reverse Emergency stop system Safety bar at intake Adjustable discharge chute • Fields of application Professional use in Arboriculture Gardening and landscaping Municipal work Shredding wood and branches

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 10 h, overall weight: 560 kg, machine/vehicle number: RR102ABH-S PRO, SCHORR RR102ABH-S PRO – Professional wood chipper for branches up to 255 mm in diameter ✅ New & in stock ✅ Shipping possible ✅ Self-feeding ✅ For tractors The SCHORR RR102ABH-S PRO is a powerful drum wood chipper for professional use. It effortlessly processes branches and log sections up to 254 mm in diameter and impresses with its robust design, high pulling power, and ease of operation. Two hydraulically driven rollers grip the wood and pull it evenly towards the blade disc, even with bulky, branched material. The feed is conveniently controlled via the control lever: forward, stop, and reverse. If a thick branch gets stuck, briefly reverse it using the reverse function, and the rollers will pull it back in cleanly. The self-feeding cutting unit with 4 knives and 1 hardened steel counter-knife guarantees a clean chipping pattern and a consistent material flow. The large feed opening allows for quick and safe material feeding, even with heavily branched wood. The discharge chute is 290° rotatable, so the chipped material can be deposited precisely – whether in piles, trailers, or big bags. Advantages ✓ Powerful PTO-powered chipper for tractors from 60 to 150 hp ✓ Chips branches and logs up to 254 mm in diameter ✓ Hydraulic roller feed with forward and reverse function via the control lever ✓ Independent hydraulic system, no connection to the tractor hydraulics required ✓ Heavy-duty blade disc with 4 knives and counter-knife ✓ Rotatable discharge chute (290°) for targeted filling ✓ 3-point linkage Cat 2 & 3, PTO shaft included ✓ Directly from the manufacturer, with spare parts storage & workshop service Technical data Manufacturer: SCHORR Model: RR102ABH-S PRO Design: 3-point linkage for tractor 3-point category: Cat 2 & 3 Gbelezilbcshccqror Drive: PTO, direct drive PTO speed: 540-1000 rpm Recommended tractor power: 60-150 hp Feed: Hydraulic roller feed, forward and reverse via control lever Hydraulic system: Independent (separate oil tank), no tractor connection required Hydraulic oil tank: 24 L Chipping capacity (max. branch diameter): 254 mm Flywheel diameter: 940 mm Flywheel weight: 200 kg Cutting knives: 4 Counter-knife: 1 Discharge rotation: 290° Safety: Emergency stop Weight: 750 kg Packaging dimensions (L×W×H): 2100 × 1500 × 1300 mm The RR102ABH-S PRO is designed for long-term use. All components are easily accessible, so maintenance work can be carried out quickly. Spare parts are available at any time from stock. Upon request, we offer technical service and repairs in our own workshop or directly at your location. Financing Leasing or installment payments are possible – please feel free to contact us.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 15 h, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required - E-starter: Convenient push-button starting - Robust cutting system: Hardened steel blades for long service life - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Max. branch thickness: 200 mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Upon request, we offer technical service and repairs in our own workshop or directly at your site. Gelhccqezilarsrjbr Financing Leasing or installment payment available—please contact us for details.

Condition: like new (used), Manufacturer / Model: JENSEN A530 L Country of manufacture: Germany (Handmade in Germany) Year of manufacture: 2021 Gbolhccqezlu Rforjr Mileage: 27.7 operating hours (factory condition!) Engine: KUBOTA diesel engine Type of chipper: Disc chipper (blades in perfect condition) Maximum material diameter: approx. 130 - 150 mm (depending on the wood's hardness) Infeed system: 2 horizontal hydraulic rollers (smooth speed adjustment) Discharge chute: Rotatable within a range of 270° with an adjustable deflector No-Stress system: Yes (automatically controls the operation of the rollers depending on the engine speed)

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 560 kg, machine/vehicle number: RR102ABH-S PRO, SCHORR RR102ABH-S PRO – Professional wood chipper for branches up to 255 mm in diameter ✅ New & in stock ✅ Shipping possible ✅ Self-feeding ✅ For tractors The SCHORR RR102ABH-S PRO is a powerful drum wood chipper for professional use. It effortlessly processes branches and log sections up to 254 mm in diameter and impresses with its robust design, high pulling power, and ease of operation. Two hydraulically driven rollers grip the wood and pull it evenly towards the blade disc, even with bulky, branched material. The feed is conveniently controlled via the control lever: forward, stop, and reverse. If a thick branch gets stuck, briefly reverse it using the reverse function, and the rollers will pull it back in cleanly. The self-feeding cutting unit with 4 knives and 1 hardened steel counter-knife guarantees a clean chipping pattern and a consistent material flow. The large feed opening allows for quick and safe material feeding, even with heavily branched wood. The discharge chute is 290° rotatable, so the chipped material can be deposited precisely – whether in piles, trailers, or big bags. Advantages ✓ Powerful PTO-powered chipper for tractors from 60 to 150 hp ✓ Chips branches and logs up to 254 mm in diameter ✓ Hydraulic roller feed with forward and reverse function via the control lever ✓ Independent hydraulic system, no connection to the tractor hydraulics required ✓ Heavy-duty blade disc with 4 knives and counter-knife ✓ Rotatable discharge chute (290°) for targeted filling ✓ 3-point linkage Cat 2 & 3, PTO shaft included ✓ Directly from the manufacturer, with spare parts storage & workshop service Technical data Manufacturer: SCHORR Model: RR102ABH-S PRO Design: 3-point linkage for tractor 3-point category: Cat 2 & 3 Drive: PTO, direct drive PTO speed: 540-1000 rpm Gbjlszh Hnzjhccqror Recommended tractor power: 60-150 hp Feed: Hydraulic roller feed, forward and reverse via control lever Hydraulic system: Independent (separate oil tank), no tractor connection required Hydraulic oil tank: 24 L Chipping capacity (max. branch diameter): 254 mm Flywheel diameter: 940 mm Flywheel weight: 200 kg Cutting knives: 4 Counter-knife: 1 Discharge rotation: 290° Safety: Emergency stop Weight: 750 kg Packaging dimensions (L×W×H): 2100 × 1500 × 1300 mm The RR102ABH-S PRO is designed for long-term use. All components are easily accessible, so maintenance work can be carried out quickly. Spare parts are available at any time from stock. Upon request, we offer technical service and repairs in our own workshop or directly at your location. Financing Leasing or installment payments are possible – please feel free to contact us.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 560 kg, machine/vehicle number: RR72ABH-S, SCHORR RR72ABH-S PRO – Professional wood chipper for branches up to 180 mm in diameter ✅ New & in stock ✅ Shipping possible ✅ Self-feeding ✅ For tractors The SCHORR RR72ABH-S PRO is a powerful drum wood chipper for professional use. It effortlessly processes branches and log sections up to 180 mm in diameter and impresses with its robust design, high pulling power, and ease of operation. Two hydraulically driven rollers grip the wood and pull it evenly towards the knife disc, even bulky, branched crown material. The infeed is conveniently controlled via the control lever: forward, stop, and reverse. If a thick branch gets stuck, briefly reverse it using the reverse function, and the rollers will pull it back in cleanly. The self-feeding cutting head with 4 knives and 1 hardened steel counter-knife guarantees a clean chipping pattern and a consistent material flow. The large feed opening allows for quick and safe material feeding, even with heavily branched wood. The discharge chute is rotatable by 290°, so the chipped material can be deposited precisely – whether in piles, trailers, or big bags. Advantages ✓ PTO-powered chipper for tractors from 40 to 100 HP ✓ Chips branches up to 178 mm in diameter ✓ Hydraulic roller infeed with forward and reverse function via the control lever ✓ Independent hydraulic system, no connection to the tractor hydraulics required ✓ Heavy-duty knife disc with 4 knives and counter-knife ✓ Rotatable discharge chute (290°) for targeted filling ✓ PTO shaft included ✓ Directly from the manufacturer, with spare parts stock & workshop service Technical data Manufacturer: SCHORR Model: RR72ABH-S PRO Design: 3-point hitch for tractor 3-point category: Cat 1 & 2 Drive: PTO, direct drive PTO speed: 540-1000 rpm Recommended tractor power: 40-100 HP Infeed: Hydraulic roller infeed, forward and reverse function via control lever Hydraulic system: Independent (separate oil tank), no tractor connection required Hydraulic oil tank: 24 L Chipping capacity (max. branch diameter): 178 mm Flywheel diameter: 740 mm Flywheel weight: 95 kg Cutting knives: 4 Counter-knife: 1 Discharge rotation: 290° Safety: Emergency stop Weight: 560 kg Packaging dimensions: 1950 × 1150 × 1300 mm The RR72ABH-S PRO is designed for long-term use. All components are easily accessible, making maintenance work quick and easy. Spare parts are always available in stock. If desired, we offer technical service and repairs in our own workshop or directly at your location. Financing Gslhccozh Hnnoqrsbr Leasing or installment payments are possible – please feel free to contact us.

Condition: new, Jensen Batch Washer 5 pieces: Valve flange seal, drain valve Jensen 700237382 8 pieces: Seal for steam injector, 370x140x4 2 pieces: Seal, steam injector Gbjlhoy Uih Tsccqrer 9005220191

Condition: new, Jensen Drain Valve, DN 100 Jensen Article No. 700280766 Gjlhccqsy Uigiersbr

Condition: like new (used), Posimon roller drum, 110 mm, with holder For batch washing machines from Jensen. Gbelhcoy Uim Aecqrer

Condition: new, 9 Jensen sensors OPR 2 ND 99812 Golhccsy Ukgweqrjbr

Condition: new, 3 units of PT100/1000 Jensen. Gslhsy Ukgdjccqrebr

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 850 h, working width: 400 mm, color: yellow, overall weight: 2,800 kg, operation weight: 2,800 kg, loading space height: 300 mm, machine/vehicle number: 111604560, Jensen Hacker A 141 DI XL with a Hatz engine for sale in very good condition, including 2 sets of spare blades; stationary machine. Infeed roller opening (W x H) 410 x 300 mm Cutting length adjustment 5–20 mm Chipper disc diameter – thickness 1060 x 40 mm Chipper disc weight 385 kg Number of chipper knives 2 Chipping capacity approx. 35 m³/h Gbeljzi Et Eshccqrer Foldable infeed table (W x H) 1370 x 840 mm

Condition: new, functionality: fully functional, Year of construction: 2025, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required - E-starter: Convenient push-button starting - Robust cutting system: Hardened steel blades for long service life - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Max. branch thickness: 200 mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Gjlhccqoxu I T Eorebr Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Upon request, we offer technical service and repairs in our own workshop or directly at your site. Financing Leasing or installment payment available—please contact us for details.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 476 h, overall weight: 11,860 kg, power: 407 kW (553.37 HP), Engine: Deutz TCD 12.0 L6, 407 kW Year of manufacture: 2024 Serial number: 21060084 Gbjlszcn Igohccqrer Location: NRW Total operating hours: 476 h Engine operating hours (new): 91 h Rotor operating hours: 207 h Availability: by arrangement Equipment: 2 horizontal infeed rollers 2 vertical infeed rollers Infeed size: 1000 x 625 mm Max. log diameter: Ø 620 mm Number of knives: 3 pcs. Counter blade: 1 pc. Capacity: up to 150 m³/h Weight: 11,860 kg Radio remote control Spiral fan HD infeed chain Baskets: 50, 70, 100 mm The machine is in excellent, like-new condition and can be inspected during chipping operations by arrangement! Warranty: The machine is sold in the condition it is in at the time of delivery. The seller assumes no liability for defects. We reserve the right to make interim sales, changes and repairs. This overview serves only as a source of information and does not constitute a binding offer.

Condition: new, Year of construction: 2025, Ideal for shredding straw, polystyrene, leaves, hay, and bread. Throughput is highly dependent on the screen and the input material: - up to a maximum of 350 kg/h for straw with a 15 mm screen - up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW - 400 volts, (9.2 kW or 15 kW also possible upon request) Optional: *Additional cost for the next larger machine with 18.5 kW and a larger silo diameter: + €2,750 net Robust steel construction, hardened cutting blades, screen with interchangeable inserts, optionally with (10), 15, 22, 26, 30, 40, or 60 mm perforations For electric drive with star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge spout 150 mm, optionally for plastic or grain pipes, blowing distance approx. 12 m, chassis with 2 running wheels, Ø 380 mm, Gjlhcjzbizscqrsbr and one pivoting support wheel, Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) Weight approx. 240 kg, Spare part prices and options: 24 blades, hardened, €9.90 net each 6 bolts, €14.90 net each 1 screen, €475 net Cover, €290 net each Polystyrene disc: €600 net each

Condition: used, color: orange, = Additional options and accessories = - Spare wheel Gelhcsy S T A Njcqrebr

Condition: used, Year of construction: 2024, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. OQ45-5 / incl. CUT CONTROL / 5-10 t / DEMO unit / in stock and immediately available / very good condition Price: €20,090.00 net / €23,907.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavators - For mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brushwood and woody material up to 10 cm Ø - For excavators from 5 to 10 tons - Suitable for mounting to various adapter plates - Drive designed for hydraulic motor, depending on the carrier's oil flow - Indirect V-belt drive with 5 V-belts - Reinforced chassis made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire hood length - Front guard with chains - Rear guard with chains - Support skids, height-adjustable, reinforced with a carbide plate Gjlhsy Rdnaoccqrsbr - Colour: red RAL3020 · anthracite RAL7021 OPT 228 – Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29–58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 – 58 - Required hydraulic pressure in bar (min-max): 150 – 250 - Required oil flow in l/min (min-max): 60 – 130 Intermediate adapter for BE314 Z1 incl. OQ45-5 adapter plate - Approx. 200 mm height We have many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We stock a wide range of Seppi products, available for immediate delivery! Please contact us for more information at / . Financing options available upon request. We are official sales and service partners for: - Seppi M. - Holp - Magni telehandlers - Gierking GMT - OilQuick - Weber MT - Westtech - DMS - JCB construction machinery - Mercedes-Benz - Iveco With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi range! Errors and prior sale excepted! Internal reference number: 170051 = Further information = Please contact Marius Herden for more details.

Condition: new, power: 10.3 kW (14.00 HP), fuel type: gasoline, Brugger HX10 shredder - Powerful, compact and versatile! The Brugger HX10 shredder is the ideal solution for all gardening professionals and hobby gardeners who are looking for a powerful yet maneuverable shredder. With its powerful 14 hp petrol engine and robust design, the HX10 effortlessly shreds branches and trunks with a diameter of over 10 cm. Whether in private gardens or on larger sites - this shredder brings power to every corner! Thanks to its narrow design, the HX10 is perfect for use in confined areas. The device can be easily adjusted by hand and maneuvered with ease, allowing you to work efficiently even in difficult garden areas. With a width of just 80 cm, the HX10 can get through any garden gate. Your advantages at a glance: - Powerful: 14 hp petrol engine for powerful shredding - Effective: Processes branches and trunks up to a diameter of over 10 cm - Compact and maneuverable: Narrow design for easy maneuvering in small spaces - Easily adjustable: Flexibly adjustable for comfortable working - Perfect for horticulture: Ideal for use in private and professional gardens The Brugger HX10 - your all-purpose weapon for efficient garden maintenance! Technical data: Golhsumv E Hoccqrsbr Dimensions: 140 x 80 x 165cm (l x w x w) Weight: 185 kg Blades: 2, 30cm wide Max. Diameter: 10cm Processing/h: 4-6m3/h Feed hopper: 51 x 42 cm --- All prices plus VAT. Contact us for a customized offer!

Condition: new, Year of construction: 2025, The Brugger PX10 wood chipper is powered by a tractor’s PTO and is capable of processing logs with a diameter of up to 10 cm. Gjlhow Dnwfsccqrsbr Its robust construction and high-quality materials ensure reliable performance. Featuring hydraulic drive, it offers an efficient solution for wood processing across various agricultural and forestry applications. - Manual feed - Diameter up to 10 cm - Weight: 165 kg - PTO speed: 540 rpm - Tractor power: 15-65 HP ---- Contact us for your customized offer! Price + VAT For companies with a VAT identification number, a net invoice will be issued.

Condition: good (used), Year of construction: 2022, Type of fuel: Petrol Gbelhjxgp H Doccqrjr Empty weight: 1.450 kg Technical condition: good Visual appearance: good Water tank volume: 30 l Transport dimensions (LxWxH): 0,267x0,118x0,239 Please contact Christian Theißen for more information Manufacturer: Först Model: TR6D Year of build: 2022 Condition: Used Data: Roller diameter: 150 x 200 mm Total dimensions LxWxH: 2,67 x 1,18 x 2,39 m Drive type: Benzin, 31,3 kW/ 42 PS Dimensions funnel WxD: 3405 x 2627 mm Hopper loading height: 2295 mm Engine: Doosan Tank volume: 30 Liter l Weight: 1.450 kg Special features: Caterpillar shredder with chain drive. Feed roller system: FörstGrip, flywheel system: top open flywheel (640x25 mm) Two 8" knives, no-stress system: Auto Intelligence, feed system: Auto Intelligence, fully water and vibration-proof touchpads. Noise level: Lwa 121dB. Price on demand Location: 41468 Neuss: immediately available

Condition: used, functionality: fully functional, Year of construction: 1987, operating hours: 1,838 h, color: orange, overall weight: 1,550 kg, operation weight: 1,550 kg, total height: 2,490 mm, total length: 3,350 mm, total width: 1,810 mm, mobility: mobile, Wood chipper: + Jensen + Model: A III DI + First registration: 29/01/1987 + 1,838 operating hours + Air brake system + Height-adjustable drawbar + Towing eye + Permissible total weight: 1,500 kg Golhccjx A Dtdsqrobr + Slewing ring + 335 cm x 181 cm x 249 cm (LxWxH) + Rotatable discharge chute + Hatz diesel engine (3L31C) + Municipal unit from 1st owner Receive all newly listed vehicles by email—sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: used, Year of construction: 2015, front tire size: 800/70R38, rear tire size: 620/75R30, 2431 chopping hours 850 hp 40 km/h / Gjlhccjr T Aq Ijqrsbr

Condition: used, Year of construction: 2010, operating hours: 2,612 h, power: 456 kW (619.99 HP), Speed: 40 / _____ / Prodrive 40 / km / Central lubrication / Air suspension seat / Air conditioning / 56 blade drum / Row Trac II / Machine is without attachment! / / Various attachments available at extra cost / / Gjlhccqoqrrv Ierjbr