Used Biesse Rover 23 for sale (327)

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, number of axes: 4, table length: 4,300 mm, table width: 2,200 mm, number of spindles: 40, tool diameter: 120 mm, TECHNICAL DETAILS Number of spindles for vertical drilling: 30 Number of spindles for horizontal drilling in X-direction: 6 Number of spindles for horizontal drilling in Y-direction: 4 Total number of vertical + horizontal spindles: 40 Number of controlled axes: 4 Maximum tool diameter: 120 mm Table dimensions: 4,300 x 2,200 mm Hjdpfxoyq Ez Ts Acpjt Number of stations in tool magazine 1: 22 Number of stations in tool magazine 2: 8 MACHINE DETAILS Milling motor power: 12 kW Total installed power: 42 kW Control software: BIESSEWORKS EQUIPMENT • Automatic panel loading system • Automatic panel stacking system • Lift table • Conveyor system • Vacuum pump Note: The safety fences at the rear and on the loading table are missing and will only be supplied subject to availability. The machine is sold and delivered as-is, in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial descriptive materials. The buyer has the right to inspect the machine prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7087

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 39 Total number of tool changer positions: 22 Hedpfx Acoyqxxrjpet

Condition: used, machine/vehicle number: 007087, X axis working area: 4300 mm Y axis working area: 2200 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 40 Hsdpfxsy Nkrve Acpjt Total number of tool changer positions: 30

Condition: used, machine/vehicle number: 008496, X axis working area: 5920 mm Y axis working area: 1600 mm Working Table: Pod and Rail Hjdpfxey H Dzfs Acpjt Main Electrospindle power: 16.5 KW Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 34

Condition: used, machine/vehicle number: 008470, X axis working area: 4300 mm Y axis working area: 2205 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Hedpfx Aceyzyrvopst Total number of drilling spindles: 46 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Hjdpfx Acjwuz Ekspst Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 008184, X axis working area: 8200 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Hedpfx Aoyxmv Nocpot Number of controlled axes: 5 axes Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 007686, X axis working area: 3765 mm Hjdpfx Aceu Tliyspst Y axis working area: 1560 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 18 Total number of tool changer positions: 12

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 94464, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 155 mm, controller model: XNC Numerical Control, TECHNICAL DETAILS Working Area X-Axis: 3,400 mm Hodpoydkkgsfx Acpot Working Area Y-Axis: 1,300 mm Working Area Z-Axis: 155 mm Number of Work Fields: 2 Tool Changer Positions (lateral): 3 Tool Changer Positions (chain): 20 Drilling Head Configuration: 10 vertical drills X-axis 12 vertical drills Y-axis 6 horizontal drills X-axis 2 horizontal drills Y-axis MACHINE DETAILS Control System: XNC Numerical Control Vertical Spindle Type: C-axis Vector, ISO 30 cone type EQUIPMENT Extraction pump 8 manually adjustable beams for suction cup support with display 8 pneumatic bakelite rails for panel lifting 3 manually adjustable suction cups per beam Front safety and protection system with mats Comprehensive safety fencing Motorized mat for chip removal

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 6,170 mm, travel distance Y-axis: 1,395 mm, travel distance Z-axis: 180 mm, drill diameter: 35 mm, rotational speed (max.): 24,000 rpm, Submission of bids obligates timely collection by the end of May! TECHNICAL DETAILS Travel axis X: 6,170 mm Travel axis Y: 1,395 mm Travel axis Z: 180 mm Spindle Main spindle power: 7.5 kW to 12 kW Max. speed: 24,000 rpm Tool holder: HSK F63 Drilling head Vertical spindles X-direction: 10 Vertical spindles Y-direction: 10 Horizontal spindles X-direction: 6 Horizontal spindles Y-direction: 2 Max. drilling diameter: 35 mm Usable length: 45 mm Max. outreach: 60 mm Tool change system Turret tool changer capacity: 18 tools Holder: ISO30 / HSK F63 Max. tool diameter: 200 mm Max. tool length: 160 mm Working length: approx. 7,300 mm MACHINE DETAILS Clamping and vacuum system Vacuum pump capacity: 90 m³/h Uniclamp clamping unit workpiece thickness: 4,098 mm Electrical system Connection: 400 V / 50 Hz / 3 Phase Power: 22 kW Compressed air Connection: 3/8" Operating pressure: 6 bar Consumption: approx. 400 NL/min Extraction Connection diameter: 250 mm Air requirement: 5,300 m³/h Air speed: 30 m/s Pressure drop: 1,500 Pa Dimensions & Weight Dimensions (L x W): approx. 8,850 x 4,020 mm Machine weight: approx. 4,750 kg EQUIPMENT Portal design with movable machining unit 10 consoles with adjustable vacuum supports Hodpsy Iwuhjfx Acpjt 30 adjustable support elements Multi-zone vacuum system Automatic central lubrication Chip conveyor Blow-off device for spindle Pneumatic preparation system Safety equipment in accordance with Directive 98/37/EC CNC control (Biesse system)

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, travel distance X-axis: 5,900 mm, travel distance Y-axis: 1,560 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, rotational speed (max.): 20,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis working area: 5,900 mm Y-axis working area: 1,560 mm X-axis travel speed: 80 m/min Y-axis travel speed: 60 m/min Z-axis travel speed: 25 m/min Drilling spindles Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 6 Hsdpfx Aoyxm Swjcpjt Horizontal drilling spindles in Y-direction: 2 Total number of vertical and horizontal spindles: 28 Milling spindles Number of controlled axes: 4 Motor power: 10 kW Spindle speed: 20,000 rpm Tool changer Number of positions: 10 Tool: head-mounted MACHINE DETAILS Total installed power: 24 kW Control system: WINDOWS Machine programming software: WRT EQUIPMENT Work table with suction cups Number of suction bar rows: 10 Suction cups for securing the workpiece Vacuum pump The machine is sold and delivered in its actual and legal condition ('as seen and approved') on the basis of photographic documentation and descriptive technical/commercial documents. The buyer is entitled to inspect the item before collection and is responsible for installation, securing and use of the machine at the final destination. External reference: 8173

Condition: used, Year of construction: 2024, functionality: fully functional, operating hours: 607 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 4,500 mm, workpiece width (max.): 260 mm, workpiece height (max.): 140 mm, number of axes: 5, number of slots in tool magazine: 22, controller manufacturer: biesse, actuation type: electric, Equipment: CE marking, documentation/manual, iesse Winline 1667 (Rover Multi Pro W G) – Pod & Rail CNC machining center 2024, only 607 operating hours Multifunctional pod & rail type CNC machining center with a mobile portal and two independent Y-axis rotary tables. Manufactured in 2024, with only 607 hours of operation – practically a new machine. CONDITION Fully functional, in excellent technical condition. Regularly serviced by an authorized service provider. Last service: [date]. INSPECTION AND DELIVERY Inspection and demonstration under power are available by prior appointment in Kalnciems, Latvia. Price EXW Kalnciems. We provide dismantling and loading for export, as well as Hsdpjzvw Nrsfx Acpot export documentation.

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,300 mm, number of spindles: 21, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 60 m/min Travel speed Z-axis: 25 m/min Number of suction traverses: 6 Spindles Number of spindles for vertical drilling: 15 Number of spindles for horizontal drilling in X-direction: 4 Number of spindles for horizontal drilling in Y-direction: 2 Total number of spindles: 21 Milling unit Number of axes: 3 Max. spindle speed: 24,000 rpm Motor power: 9 kW Tool changer Number of tool positions: 10 MACHINE DETAILS Total power: 26 kW EQUIPMENT Vacuum pump WINDOWS control system WRT machine programming software Hsdsytr Ryepfx Acpet Note: Cones and milling cutters are not included in the scope of delivery. Safety fences will be supplied subject to availability (right side missing). The machine is sold and delivered in its actual and legal condition ("as seen and agreed") based on photo documentation and technical/commercial documents for descriptive purposes. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8174

Condition: new, machine/vehicle number: 1000007776, CONTROL SYSTEM • Numerical control, PC-based • bSolid software • CAD-CAM 3D module – 3-axis working module – bEdge module TECHNICAL FEATURES • Usable working area (X-Y-Z): approx. 4,320 x 1,600 x 200 mm • Usable working area for edgebanding (X–Y): approx. 3,300 x 1,500 x 60 mm PANEL SUPPORT AREA • 2 independent working zones on the X axis • 10 Set-Up Assistant (SA) working tables for panel support, with manual positioning and illuminated position/direction indicators – 32 rails • 8 lifting bars for loading support • 28 stops (8 rear stops, 8 intermediate stops at 670 mm, 6 side stops, 6 central stops) each with descent verification sensors • 1 vacuum pump, 100 m³/h DRILLING/SAWING UNIT • 1 extra 'Z' pod for rear working unit • 1 BH 24 L boring head GROOVING/MILLING UNIT • 1 electrospindle, 13.2 kW (17.7 HP), HSK F63 tool clamping system, air-cooled, equipped with a 360° working unit and gear C-axis torque • 1 air blowing system with 4 nozzles • 1 revolver tool changer with 16 positions on the X pod EDGEBANDING UNIT • GU60L edgebanding unit for EVA and PUR adhesives, including: – glue pot for EVA and glue pot for PUR – pre-melter for EVA glue – double pressure roller for edgebanding radii up to 30 mm; closed-loop joint sensor • 1 edge magazine for 2 coils positioned on the X pod • 1 edge magazine for 2 coils outside the machine Hsdpfx Aow Nip Socpet • 1 blower unit for panel cleaning prior to edgebanding • 1 cleaning station for edge trimming units • 1 HSK F63 aggregate for blade diameter max. 215 mm • 1 combined unit for rough trimming, edge scraping, and glue scraping EF60A • 1 unit for edge rounding and end trimming • 1 kit for narrow panels 10-60 mm (edge max. 2 mm) and 12-60 mm (edge max. 3 mm) PREDISPOSITIONS AND ACCESSORIES • Automatic lubrication system • Waste extraction system for wood chips SAFETY STANDARDS AND OPTIONS • Copy of original EC Declaration of Conformity • Bumper system and double front/rear photoelectric safety barriers

Condition: used, Year of construction: 2023, machine/vehicle number: 1000048862, functionality: fully functional, operating hours: 1,315 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,660 mm, travel distance Y-axis: 260 mm, workpiece length (max.): 4,500 mm, workpiece width (max.): 260 mm, workpiece height (max.): 150 mm, number of axes: 4, number of slots in tool magazine: 22, controller manufacturer: biesse, actuation type: electric, Equipment: CE marking, documentation/manual, Biesse Winline 1650 – Pod & Rail CNC machining center, 2023, only 1315 operating hours. Pod & rail type CNC machining center with an integrated loading/unloading manipulator. Manufactured in 2023, with only 1315 hours of operation – practically a new machine, ready for production immediately after installation. CONDITION Hedpfxszvvmpj Acpet The machine is fully functional and in excellent technical condition. Regularly serviced by the official service provider. Last service: [date]. Reason for sale: [reason]. INSPECTION AND DELIVERY We provide dismantling and loading for export, and assist with transportation arrangements.

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Hedpsy Ehrxofx Acpjt Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, KuKa robot with Biesse RBO and Schmaltz handling equipment . Made by Biesse - RBO - KuKa controller KRC-2 Hodjxy Aftjpfx Acpjt - KuKa softwear KUKA 4.1.7 - Table for referanse point indication for the panels. - 4 meter long beam with carrige for the movement in X direction , parallell to the machine x axis - Schmaltz vacuum system - Separate el cabinet for the robot and other el cabinet for the RBO handling. This robot cell was connected to the Biesse Rover machine until 10.11.2025 , for the handling of panels to and from the machine. All robot function are 100% operative. Watch at : youtube.com/watch?v=cT5JA-PGM-c. Sales from the factory close down. Please take a look at incl. video Rekman Maskin & Service - service of cnc machines since 1986

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type Numerical Control Type ?? / Software Biesse Works N. 1 Working table with N. 10 supports ATS (L = mm 1800) Automatic Tools Changing System (Store /14 folds-positions) Useful working area (X - Y - Z) mm 6735 x 1650 x 290 Useful working area (X - Y - Z) in edge banding mm 5780 x 1650 x 60 Hodpfxoy Nk R Es Acpot N. 2 Working areas n. 1 Vacuum pump (capacity m3/h) 250 Front emergency carpets - Motorized carpet to evacuate the wastes from the working process Total power installed KW 31.13 Working group (top): N. 20 Independent vertical boring spindles N. 8 Independent horizontal boring spindles N. 1 Circular Saw N. 1 Vertical electro-spindle HSK F63 (Kw 13,2) Edge Banding group on board, with Glueing Unit (Hot Melt glue) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 4 reels)

Condition: used, Year of construction: 2018, total height: 2,200 mm, total length: 5,350 mm, total width: 1,200 mm, Colour: White Weight: 3.500 kg Price: On request - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1000022855 - Number of units [pcs]: 8 - └ 1st unit type: - - Tools available: Yes - └ 3rd unit type: - - Tools available: Yes - └ 4th unit type: - - Tools available: Yes - └ 5th unit type: Hedpfx Acszw El Rspst - - Tools available: Yes - └ 6th unit type: - - Tools available: Yes - └ 7th unit type: - - Tools available: Yes - └ 8th unit type: - - Tools available: Yes - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 3 - Edge band height [mm]: 64 - Min. panel thickness [mm]: 10 - Max. panel thickness [mm]: 60 - Min. panel width [mm]: 85 - Max. panel width [mm]: 3200 - Min. panel length [mm]: 140 - Max. panel length [mm]: 3200 - Min. feed speed [m/min]: 12 - Max. feed speed [m/min]: 18 - Max. spindle speed [rpm]: 12000 - Voltage [V]: 400 - Current consumption [A]: 20 - Fuse [A]: 32 - Power [kW]: 11.0 - Transport dimensions: 5350mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2018, machine/vehicle number: 1000023651T, functionality: fully functional, power: 50 kW (67.98 HP), input frequency: 50 Hz, cutting height (max.): 95 mm, cutting width (max.): 3,200 mm, Equipment: documentation/manual, Selco WNAR 6 miter saw center. Hodpszl T Hlsfx Acpst

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 1000023212, functionality: fully functional, power: 13 kW (17.68 HP), input voltage: 400 V, input current: 24 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 12 mm, height adjustment type: electric, feed rate X-axis: 18 m/min, actuation type: electric, total length: 5,900 mm, overall weight: 1,870 kg, Equipment: CE marking, Biesse Akron 1440 A – single-sided automatic edgebander (2018) Single-sided automatic edgebander in excellent, near-new condition. Regularly serviced, fully functional and currently in full daily production. Inspection under power / live demonstration possible. Gluing system – dual EVA + PUR: the machine is equipped with both a polyurethane (PUR) glue roller and an EVA glue roller, each with its own glue pot, plus a PUR pre-melter. This allows the full range of edgebanding work, from standard EVA to high-quality, water- and heat-resistant PUR bonding. Feed & pressure: automatic coil edge feeder with separate, automatic feeding; pressure-roller conveyor (steel, rubber and edge-pressing rollers) for a clean, consistent glue line. New touch-screen control panel; rear cleaning brushes replaced; scraper inserts/blades replaced. Hedpfx Asy U T Azecpjt Working capacity: panel thickness 8–60 mm · edging material height 14–64 mm · edge thickness 0.4–3 mm (coil) / up to 12 mm (strips) · panel length 100–3200 mm · multi-speed feed 8/12/15/18 m/min. Technical data: power 13 kW · 400 V / 50 Hz / 3-phase · weight approx. 1870 kg · air supply 7 bar · year of construction 2018.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, TECHNICAL DETAILS Maximum edge banding thickness: 12 mm Maximum panel thickness: 60 mm Maximum roller material thickness: 3 mm Minimum workpiece length: 140 mm Minimum workpiece width: 50 mm Feed rate: 12 - 18 m/min Feed rate: Infinitely adjustable Height adjustment: motorized Gluing system: Granulate Glue reservoir: Top Cross-cutting unit: 2 motors Edge copying unit: 2 motors Flush/radius/chamfer stations: 1 Design: Left-hand machine MACHINE DETAILS Control system: BIESSE SMART TOUCH 23" Total power consumption: 13 kW Dimensions & Weight Machine length: 5,610 mm Weight: approx. 2,250 kg Hjdpezktquefx Acpjt EQUIPMENT Belt overpressure Quick-change glue reservoir Suitable for PUR adhesives Strip magazine Spraying system Joint milling unit Preheating zone Pressure zone: NC-controlled Profile drawing blade, flat drawing blade Swivel unit Nesting equipment NC axis(es) Profile change: automatic Conformity marking: CE mark, EAC mark

Condition: excellent (used), Year of construction: 2011, Edge banding machine Manufacturer: Biesse Type: Akkron 440 Hjdpfx Aszltbiecpst Year of manufacture: 2011 Edge band thickness: 0.4 - 3 /10 mm Workpiece thickness: 10-60 mm Feed rate: 18 m/min Workpiece thickness adjustment: Electric Overall length: approx. 5,100 mm Gluing unit: Yes Trimming saw unit: Yes Flush trimming unit: Yes Corner copying unit: Yes Radius trimming blade: Yes Straight trimming blade: Yes Scraping unit: Yes Spray device: Yes

Condition: good (used), Year of construction: 2015, functionality: fully functional, TS07 Control System Hedpszuavlofx Acpot · 7” LCD Touch Screen graphical display Edge trimming unit RT02, 1 set of diameter trimming cutters, H=65 mm for edge trimming unit RT02 Gluing unit SP03 End trimming unit IT03 Fine trimming unit RF02 Edge rounding unit AR02 Edge scraper RB02 Glue scraper unit RC02 Cleaning unit LPT02 Anti-adhesive unit ADZ02 AX-1, NC axis on the stop AX-1, motorized, controlled pressure beam AX-1, NC axis for pressure rollers for the gluing unit AX-4, NC axis for the fine trimming unit AX-2 NC axis on the edge rounding unit AR02 AX-4 NC axis on the edge scraper RB02

Condition: like new (used), Year of construction: 2021, machine/vehicle number: 1000042824, We are offering for sale a very well-maintained Biesse BREMA EKO 2.2 machine from 2021. The machine includes tool changing, two drilling units, and a set of tools. Software: bSolid. The machine has been serviced by our technician, so we are very familiar with its condition and history. Hsdpszcrfpefx Acpot The machine can be tested at our showroom in Brno.