Used Between Dryer for sale (6,542)

Condition: ready for operation (used), Year of construction: 2016, Brand: HAKO Model: Scrubmaster B650 Year of manufacture: 2016 Capacity: 3200 m²/h Scrubbing width: 65 cm Drive: 24V Clean water tank: 72L Ibjdpfx Aozqnclebnoa Dirty water tank: 74L Internal charger, 220 volts.

Condition: not inspected (used), Year of construction: 2005, Without battery Isdpohzrbnsfx Abneba Manufacturer: Fimap

Condition: used, Year of construction: 2011, Manufacturer: BEGA capacity: 21 m3/min Ibsdpfjuk A Enox Abnea

Year of construction: 2003, condition: good (used), Capacity: 350 m³/h Isdofl Ig Rjpfx Abnjba

Condition: used, functionality: fully functional, machine/vehicle number: U00188, Year of construction: 2015, operating hours: 1,334 h, construction height: 2,170 mm, empty load weight: 2,750 kg, total length: 2,370 mm, construction width: 1,450 mm, sweeping width: 1,450 mm, Wet scrubber machines Chassis number: U00188 Condition: Ready for use and fully functional Technical condition: Very good Front tire type: Solid rubber Rear tire type: Solid rubber Battery voltage: 36V Battery Ah: 930Ah Battery type: PzS Battery year of manufacture: 2015 Battery condition: 60 - 80% Ibodjzqhh Ispfx Abnea Description: German Tennant T17 No.: R0800 Year of manufacture: 2015 Operating hours: 1,334 Chassis number: U00188 Working width: 1,450 mm Overall height: 2,170 mm Length: 2,370 mm Overall width: 1,450 mm Weight: 2,750 kg Battery: 36 V / 930 Ah, PzS, year 2015 Battery condition: 60–80 % Tires: Solid rubber, single tires front and rear Condition: Ready for use and fully functional Visual condition: Very good Technical condition: Very good Location: Düsseldorf Availability: Immediate Charger: Not included Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. If you have not found the right machine, please contact us. We have a large selection of additional equipment available on site. English Tennant T17 No.: R0800 Year of manufacture: 2015 Operating hours: 1,334 Serial number: U00188 Working width: 1,450 mm Overall height: 2,170 mm Length: 2,370 mm Overall width: 1,450 mm Weight: 2,750 kg Battery: 36 V / 930 Ah, PzS, year 2015 Battery condition: 60–80% Tires: Solid rubber, single tires at the front and rear Condition: Ready for use and fully functional Visual condition: Very good Technical condition: Very good Location: Düsseldorf Availability: Immediately Charger: Not included Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site.

Condition: used, For sale: Refrigeration Dryer - Pole Star Ibodpozqdyasfx Abnea HIROSS PGE 110HB2110100 Serial No. 2057670002 Weight: 140 kg Price: 470 euros, negotiable.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 1,010 mm, total width: 1,010 mm, total height: 2,010 mm, mesh size: 10 mm, Equipment: CE marking, Own production smoke trolleys, Lithuania currently offers 4 complete sets of drying trolleys with trays available from stock. Were used as a demonstration model in the showroom. Can be sent one set at a time. New price 3500 EUR per set Full manufacturer warranty is provided by HySpriz. This is an ideal trolley solution for drying products such as jerky, kabanos, fish snacks, and pet sticks. It is also suitable for fish defrosting processes and even baking applications. The mesh structure ensures excellent air convection through all product levels, resulting in uniform drying and stable product quality. We manufacture in Ukraine a heavy-duty stainless steel drying trolley, specifically designed for industrial and semi-industrial production of meat and fish snacks, raw-cured sausages, jerky, and pet treats. The trolley is fully compatible with RK50U, SAS200, and FARS200 systems and is ideal for use in drying chambers, smokehouses, and climate-controlled environments with air dehumidification. The external dimensions of the trolley are 2000 × 1010 × 1010 mm. The frame is made of corrosion-resistant AISI 304 stainless steel using a robust 40 × 40 × 1.3 mm profile. It includes 30 levels with a 55 mm spacing between tiers and special locking systems to prevent trays from falling during movement. For mobility, the trolley is equipped with six heavy-duty pendulum swivel casters (Ø125 mm), allowing full rotation even when loaded. Each trolley includes 60 stainless steel trays sized 900 × 500 mm. The trays are made of corrugated stainless steel mesh, 5x5 mm. can be optionally equipped with Teflon liners (5,8 EUR/pcs) Wire thickness is 0.7 mm for high rigidity. Iodpferftxfjx Abnjba Each tray has a 15 mm perimeter rim for improved airflow and heat distribution. Reusable non-stick Teflon inserts are included, ideal for sticky or soft products. Total load capacity is up to 400 kg per trolley, with up to 7 kg per tray. The system supports both low-temperature dehydration and high-temperature processing. Compatible with chambers using horizontal or vertical airflow. Designed for easy cleaning, hygiene, and long service life. This trolley ensures efficient moisture removal and uniform air distribution, which directly improves drying performance and final product shelf life.

Condition: used, functionality: unexamined, The belt dryer was not put into operation by me; it was purchased used. Ibedpfx Aboyf Uhlsnoa It is being sold as used, without warranty or liability. The right switch cabinet door is damaged (hinges torn out).

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NL3202626756, sweeping width: 530 mm, empty load weight: 150 kg, fuel type: electric, construction height: 1,050 mm, drive type: Elektro, construction width: 900 mm, Sweeping and suction machine Chassis number: NL3202626756 Condition: New unit Technical condition: New Description: Sweeping width 530 mm, suction width 760 mm, brush pressure 27 kg, working width 530 mm, area performance 1,800 m²/h, fresh water tank 50 l, dirty water tank 50 l, length 1,300 mm, width 900 mm, height 1,050 mm, weight 150 kg. Iedpfx Aovzzcqsbnsba

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KAESER TE91 refrigerant dryer capacity: 9100 l/min; year of manufacture: 2008. Iedpozp Hzqofx Abnoba net price: 6900 PLN gross price: 8487 PLN

Condition: excellent (used), functionality: fully functional, KAESER TF203 desiccant dryer Capacity: 21,000 m³/min. The dryer is in perfect working order. Net price: 9,700 PLN Isdezp Hmgopfx Abneba Gross price: 11,931 PLN

Condition: used, operating hours: 2,744 h, machine/vehicle number: 184482, battery voltage: 36 V, fuel type: electric, 184482 Serial Number: 758002 7 1317 1 Ibodpjyyk Tnjfx Abnea Battery Details: 36v Brushes need to be replaced, service required Internationaler Transport möglich/ International delivery available

Condition: good (used), Description: The HELIOMAT 6K is a batch dryer specifically designed for the efficient drying of small quantities of plastic material directly before processing. It is particularly used in laboratories or when frequent material changes are required (e.g., small series production). Batch dryer/pre-drying station with an integrated absorption dryer, type TLZ 12.1. Six 15-liter V2A modules can be dried simultaneously on the Heliomat, each with different temperatures, featuring a sliding guide and an outlet slide (80x15mm) for ARBURG machines. Four additional 15-liter modules are included, so you will receive a total of ten small-batch dryers. Ibjdpfx Aszpydxjbnsa 3 air filters Cooler for recirculated air at high temperatures above 120°C. Drying can be performed up to 170°C! Weekly timer 6 red/green traffic lights to indicate the end of the drying cycle or a fault at the docking station Automatic 6-stage air flow control via frequency inverter on the dryer fan The unit is mobile Includes interface for a dew point sensor for the absorption dryer. The Heliomat is 140 cm high, 54 cm deep, and 2.95 m wide.

Condition: repair required (used), Year of construction: 2002, functionality: not functional, ★ PRICE REDUCED – MUST SELL: €50,000 (was €80,000) ★ We are selling 3 Imea 2002 Wood Dryers (Imea) + Steam Generator + Boiler (Elbi) 3 Wood Dryers and 1 Steam Generator: - Dimensions: 12.5m x 7.2m x 4.2m 📐 - Capacity for each dryer: 220m3 of timber 🌳 - Steam Generator: 8.5m x 6m x 5m 📐 - Aluminum structure, sandwich panels 🏗️ Ibjdpfxopugxno Abnsa Wood and Sawdust Waste Boiler: - Equipped with a pumping system, pipes, and a boiler - Power: 3,500,000kCal/h (40,000kW) Everything operates on an automated system. Total: €50,000 excluding VAT 💰 Dismantling to be done by the buyer 🔧 the seller can assist with a telescopic manitou 📍 Pickup Address: Teiu 337291, Romania 🌍 For more information or to make an offer, please contact us.

Condition: like new (used), Year of construction: 2015, COMPAIR F 0260 HS refrigerant dryer CAPACITY: 26 m3/min Year of manufacture: 2015 Ibjdpjzpbtnefx Abnsa DRYER IS IN FULLY OPERATIONAL CONDITION.

Year of construction: 2026, condition: new, functionality: fully functional, CORMAK Compressed Air Dryer is a professional industrial device designed for effective removal of moisture, water vapour, and oil particles from compressed air systems. Using efficient refrigeration technology, the refrigerated air dryer ensures stable operation of compressed air-powered equipment, extending their service life and improving reliability. It is an ideal solution for companies looking for modern compressed air treatment methods in pneumatic installations. Main advantages of the CORMAK compressed air dryer Advanced refrigeration system — the two-stage air cooling process down to the dew point ensures effective separation of moisture and oil particles. Stable operation in systems up to 10 bar — the device is designed for standard industrial compressed air installations. High efficiency — capacity of up to 3800 l/min makes the dryer an effective solution for medium and large compressed air systems. Energy-saving design — the use of a variable-speed fan reduces power consumption to only 0.9 kW. Automatic condensate drain valve — ensures reliable condensate removal without the need for operator supervision. Compact dimensions and easy installation — ideal for upgrading existing pneumatic systems. Design and technology The refrigerated compressed air dryer has been designed for maximum efficiency and long-term durability. Its main structural components include: 1. Air-to-air heat exchanger During the first stage of the process, incoming compressed air passes through a heat exchanger, where it is pre-cooled by colder air leaving the evaporator. The counterflow design improves heat recovery and increases the overall energy efficiency of the system. 2. Refrigeration system evaporator During the second stage, compressed air enters the evaporator, where it is cooled to a dew point temperature of 3°C. This causes the water vapour and oil particles contained in the air to condense. 3. Condensate separator After cooling, the mixture of air and condensate enters a high-efficiency separator, where condensed water and oil are separated and automatically discharged outside the unit. 4. Fan control system Variable-speed fan technology enables intelligent adjustment of cooling intensity according to actual operating requirements. This reduces energy consumption and extends the service life of system components. Equipment included Automatic condensate drain valve Integrated water and oil separator Variable-speed fan with automatic adjustment to operating conditions Electronic control system ensuring stable operating parameters Compact and durable housing resistant to industrial environments Technical specifications Parameter Value Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Capacity 3800 l/min Power consumption 0.9 kW Supply voltage 230 V Dimensions (L × W × H) 850 × 480 × 480 mm Isdpfomt Dcqsx Abneba Weight 59 kg Refrigerant type and quantity R410a, 650 g

Year of construction: 2026, condition: new, CORMAK Compressed Air Dryer is a professional industrial device designed for effective removal of moisture, water vapour, and oil particles from compressed air systems. Thanks to advanced refrigeration technology, the refrigerated air dryer ensures stable operation of compressed air-powered equipment, extending their service life and improving reliability. It is an ideal solution for companies looking for modern compressed air treatment methods in pneumatic installations. Main advantages of the CORMAK compressed air dryer Advanced refrigeration system — the two-stage air cooling process down to the dew point ensures effective separation of moisture and oil particles. Stable operation in systems up to 10 bar — the device is designed for standard industrial compressed air installations. High efficiency — capacity of up to 2800 l/min makes the dryer an effective solution for medium and large compressed air systems. Energy-saving design — the use of a variable-speed fan reduces power consumption to only 0.58 kW. Automatic condensate drain valve — ensures reliable removal of condensate without the need for operator supervision. Compact dimensions and easy installation — ideal for upgrading existing pneumatic systems. Safe R134a refrigerant — provides high operating efficiency while meeting modern environmental standards. Design and technology The refrigerated compressed air dryer has been designed for maximum efficiency and durability. Its main structural components include: 1. Air-to-air heat exchanger During the first stage of the process, incoming compressed air passes through a heat exchanger, where it is pre-cooled by colder air leaving the evaporator. The counterflow design improves heat recovery and increases the overall energy efficiency of the system. 2. Refrigeration system evaporator During the second stage, compressed air enters the evaporator, where it is cooled to a dew point temperature of 3°C. This causes the water vapour and oil particles contained in the air to condense. 3. Condensate separator After cooling, the mixture of air and condensate enters a high-efficiency separator, where condensed water and oil are separated and automatically discharged outside the unit. 4. Fan control system Variable-speed fan technology enables intelligent adjustment of cooling intensity according to actual operating requirements. This reduces energy consumption and increases the service life of system components. Equipment included Automatic condensate drain valve Integrated water and oil separator Variable-speed fan with automatic adjustment to operating conditions Electronic control system ensuring stable operating parameters Compact and durable housing resistant to industrial environments Iodpfxomt Dcfe Abneba Technical specifications Parameter Value Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Capacity 2800 l/min Power consumption 0.58 kW Supply voltage 230 V Dimensions (L × W × H) 420 × 700 × 690 mm Weight 37 kg Refrigerant type and quantity R134a, 550 g

Condition: new, Year of construction: 2026, LUFT 1000 INVERTER Screw Compressor Set with 270 L Vertical Air Receiver and IZBERG N10S Refrigerated Air Dryer The set includes the LUFT 1000 INVERTER screw compressor, a 270 L vertical compressed air receiver with fittings, and the IZBERG N10S refrigerated air dryer. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Technical Specifications – LUFT 1000 INVERTER Parameter Specification Motor power 7.5 kW Ijdpoxazlrjfx Abneba Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Outlet connection diameter (G) 1/2" Dimensions 810 × 610 × 850 mm Weight 160 kg IZBERG N10S Refrigerated Air Dryer Parameter Specification Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Pressure dew point 3°C Air flow rate 1,500 l/min Power consumption 0.58 kW Power supply 230 V Dimensions (D × W × H) 380 × 600 × 625 mm Weight 31 kg Refrigerant type and quantity R134a, 400 g Key Advantages of the 270 L CORMAK Pressure Vessel Professional pressure vessel construction – manufactured from high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliant with European safety and quality standards. Working pressure of 11 bar – suitable for most pneumatic systems, including applications with higher pressure requirements. Large 270 L capacity – provides a stable supply of compressed air and reduces the frequency of compressor start-up cycles. Multiple connection ports – as many as 5 connection ports with diameters of 1 1/4", 2" and 1/2", allowing flexible connection to various compressed air systems. High-quality finish – durable anti-corrosion coating applied both inside and outside the tank. Space-saving vertical design – the vertical configuration helps save valuable floor space in the facility. Standard Equipment 5 connection ports – diameters: 1 1/4", 2", 1/2" Rating plate with CE marking UDT notified body identification number Complete technical documentation and pressure vessel certificate Internal and external anti-corrosion coating Tank Accessories 1 × 1/2" plug Pressure gauge + 1/2" adapter 1/2" tee fitting 1 1/4"–3/4" inlet/outlet connection 1/2" water drain valve Important Note The safety valve is not included with the tank accessories and must be purchased separately.

Condition: new, Year of construction: 2026, CORMAK THEOR H1515.8 COMPACT Screw Compressor with Integrated Air Dryer The CORMAK THEOR H1515.8 COMPACT screw compressor with an integrated air dryer combines state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. CORMAK THEOR H1515.8 COMPACT High-Pressure Compressor – Ideal for Fiber Laser Cutting Machines Are you looking for a professional and compact solution to power your fiber laser cutting machine? The CORMAK THEOR H1515.8 COMPACT screw compressor is an excellent choice, designed specifically for precision laser cutting applications. With a 15 kW motor and an actual output of up to 1,700 l/min, it provides a stable and reliable supply of compressed air – essential for the efficient operation of laser cutting systems. The THEOR H1515.8 COMPACT screw compressor reaches a maximum operating pressure of 15.8 bar, enabling effective cutting of a wide range of materials. The intuitive MAM electronic control panel provides full control over the machine's operation, allowing easy monitoring and adjustment of operating parameters. Key Parameters ✅ Pressure: up to 15.8 bar ✅ Air output: up to 1,700 l/min ✅ Motor power: 15 kW Technical Specifications Parameter Specification Motor power 15 kW Voltage 400 V / 50 Hz Output at 0–6 bar 1,700 l/min Output at 6 bar 1,650 l/min Output at 8 bar 1,500 l/min Output at 10 bar 1,500 l/min Output at 12 bar 1,350 l/min Output at 14 bar 1,350 l/min Outlet connection 3/4" Dimensions 1550 × 750 × 1200 mm Weight 500 kg Iedpfxemrmy Aj Abnoba

Condition: new, Year of construction: 2026, THEOR H1520 COMPACT Screw Compressor with Integrated Air Dryer The THEOR H1520 COMPACT screw compressor with integrated air dryer combines state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and reliable operation. With many years of experience in the market and extensive expertise in the distribution of piston and screw compressors, we provide our customers with proven and trusted pneumatic solutions as a European manufacturer. CORMAK THEOR H1520 COMPACT High-Pressure Compressor – Ideal for Fiber Laser Cutting Machines Are you looking for a professional and compact solution to power your fiber laser cutting machine? The CORMAK THEOR H1520 COMPACT screw compressor is an excellent choice, designed specifically to support precision laser cutting applications. With a 15 kW motor and an actual output of up to 1,350 l/min, it provides a stable and reliable supply of compressed air – essential for the efficient operation of laser cutting systems. The THEOR H1520 COMPACT screw compressor reaches a maximum operating pressure of 20 bar, enabling effective cutting of a wide range of materials. The intuitive MAM electronic control panel provides full control over the machine's operation, allowing easy monitoring and adjustment of operating parameters. Key Parameters ✅ Pressure: up to 20 bar ✅ Air output: up to 1,350 l/min ✅ Motor power: 15 kW Technical Specifications Parameter Specification Motor power 15 kW Voltage 400 V / 50 Hz Output at 0–6 bar 1,350 l/min Output at 6 bar 1,350 l/min Output at 8 bar 1,250 l/min Output at 10 bar 1,250 l/min Output at 12 bar 1,150 l/min Output at 14 bar 1,150 l/min Output at 16 bar 1,050 l/min Output at 18 bar 930 l/min Isdpomrmx Tofx Abneba Output at 20 bar 930 l/min Outlet connection 3/4" Dimensions 1550 × 750 × 1200 mm Weight 500 kg

Condition: new, Year of construction: 2026, LUFT 1000 COMPACT Screw Compressor with Integrated Refrigeration Air Dryer The LUFT series screw compressor from the Polish brand CORMAK represents the latest advancements in pneumatic technology, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features: Innovative Design Our compressors are built on advanced engineering and European manufacturing precision. The solid construction, enhanced with modern components, ensures long-lasting and reliable operation in all working conditions. Integrated Refrigeration Dryer The COMPACT version with an integrated dryer offers space-saving and comprehensive functionality in a single unit. The built-in refrigeration dryer ensures clean and dry air, protecting your system from corrosion and damage. Quiet Operation & Comfort Designed with attention to detail, our compressors operate with exceptionally low noise levels. Effective soundproofing and vibration reduction systems provide a comfortable working environment, enhancing operator focus and well-being. Smart Control System The intuitive MAM electronic control panel acts as the command center of your compressor. It allows precise monitoring of parameters, scheduling of maintenance, and quick diagnostics, ensuring system stability and protecting key components. Tailored to Your Needs We understand that every application is unique. CORMAK compressors can be configured with additional air treatment systems to perfectly match the specific requirements of your industry. Dynamic Operating Pressure Automatic pressure adjustment ensures that the compressor delivers exactly the amount of compressed air needed at any given moment, maximizing energy efficiency and minimizing losses. Sustainable Development We prioritize environmentally friendly solutions. The energy-saving technologies used in our compressors not only reduce your energy bills but also minimize environmental impact. The heat recovery option allows for maximum energy utilization. Integrated Refrigeration Dryer – Top-Level Air Quality Iedpfxjxmg A As Abnoba Two-Stage Drying System: Provides effective moisture removal and protection for your pneumatic system. Variable-Speed Fan: Automatically adjusts cooling performance to match working conditions, optimizing energy consumption. Dual Filtration System: Includes a pre-filter with 3.0 µm precision for removing larger solid contaminants, and a fine filter with 0.1 µm precision that captures oil aerosols and other fine particles, ensuring the highest level of air purity. Technical Specifications Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Air Delivery (0–6 bar) 990 L/min Air Delivery at 6 bar 950 L/min Air Delivery at 8 bar 950 L/min Air Delivery at 10 bar 930 L/min Outlet Connection Diameter (G) 3/4" Dimensions (L x W x H) 1320 x 650 x 945 mm Weight 320 kg

Condition: new, Year of construction: 2026, Set including LUFT 1500 Inverter Screw Compressor, 1000L Vertical Air Receiver with Accessories, and IZBERG N20S Dryer The LUFT 1500 screw compressor with inverter, combined with a 1000-liter vertical compressed air tank equipped with fittings and the IZBERG N20S air dryer, provides a complete, efficient, and modern solution for compressed air systems. The LUFT series compressor from the Polish brand Cormak represents the latest technology in pneumatics, combining high-quality materials and precision-engineered components. Its low operating costs, ease of maintenance, ergonomic and durable design, and high performance guarantee reliable and efficient operation in industrial applications. Technical Specifications – LUFT 1500 INVERTER Iodjxnyhuepfx Abnsba Motor Power: 11 kW Voltage: 400V / 50Hz Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet Connection (G): 1" Dimensions: 1170 × 730 × 1020 mm Weight: 243 kg Technical Specifications – IZBERG N20S Dryer Inlet/Outlet Connection (BSP): 1" Maximum Operating Pressure: 10 bar Max. Inlet Air Temperature: ≤ 38°C Dew Point Temperature: 3°C Flow Capacity: 2800 L/min Power Consumption: 0.58 kW Power Supply: 230V Dimensions (L × W × H): 420 × 700 × 690 mm Weight: 37 kg Refrigerant Type and Quantity: R134a, 550 g Technical Specifications – 1000L Vertical Air Receiver Tank Capacity: 1000 liters Working Pressure: 11 bar Wall Thickness: 4 mm Diameter: Ø 808 mm Height: 2300 mm Weight: 230 kg Number of Connections: 6 Connection Sizes: 2", 1/2" Dimensions: 230 × 80.8 cm

Condition: new, Year of construction: 2026, THEOR 20 INVERTER Screw Compressor with Refrigerated Air Dryer The set includes the THEOR 20 INVERTER screw compressor and the N20S refrigerated air dryer. The CORMAK THEOR series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK THEOR 20 COMPACT screw compressor with refrigerated air dryer and VSD inverter is an excellent choice. With a 15 kW motor and an impressive actual output of up to 2,100 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for sandblasting applications. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, large automotive workshops and manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air, protecting the compressed air system against corrosion and damage. It is also equipped with a VSD inverter, which automatically adjusts the compressor's speed according to demand, helping to reduce electricity consumption. The THEOR 20 COMPACT oil-injected screw compressor with refrigerated air dryer and VSD inverter features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. Ijdjmqlqdspfx Abnjba The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 2,100 l/min ✅ Motor power: 15 kW Technical Specifications Parameter Specification Motor power 15 kW Voltage 400 V / 50 Hz Output at 0–6 bar 2,100 l/min Output at 6 bar 2,000 l/min Output at 8 bar 1,700 l/min Output at 10 bar 1,600 l/min Outlet connection diameter (G) G1" Dimensions 1550 × 740 × 1180 mm Weight 500 kg

Condition: new, Year of construction: 2026, LUFT 1500 COMPACT Screw Compressor with Refrigerated Air Dryer The LUFT series screw compressor by the Polish brand Cormak represents the latest innovations in pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features of the Screw Modules in CORMAK Compressors: Modern Technology and Efficiency The screw modules ensure excellent performance and outstanding energy efficiency. Their design focuses on maximizing output while minimizing energy consumption. Precision and Control Thanks to advanced engineering solutions, the screw modules allow for precise control of the compressed air generation process. This translates into stable pressure and optimal operation of the entire pneumatic system. Durability and Reliability The screw modules used in CORMAK compressors are built for longevity. Their sturdy construction and use of high-grade materials ensure reliability even under harsh industrial conditions, minimizing downtime and the need for frequent repairs. Integrated Refrigerated Air Dryer – Top-Level Air Quality Two-Stage Drying System Effectively removes moisture and protects the pneumatic system. Variable-Speed Fan Automatically adjusts cooling capacity according to operating conditions, resulting in energy savings. Dual Filtration System A pre-filter with 3.0 µm accuracy removes larger solid contaminants. A precision filter with 0.1 µm accuracy captures fine oil particles (aerosols) and other impurities, ensuring ultra-clean air. Technical Specifications: Parameter Value Motor Power 11 kW Voltage 400V / 50Hz Output (0–6 bar) 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet Connection Diameter (G) 1" Isdjxnk Acepfx Abneba Dimensions 1550 x 740 x 1150 mm Weight 500 kg Manufacturer: CORMAK

Condition: new, Year of construction: 2026, Set including the LUFT 700 VSD+PM screw compressor, a vertical 200-liter compressed air tank with fittings, and the IZBERG N10S air dryer. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high efficiency guarantee effective and trouble-free operation. Compressor Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: approx. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 95 kg IZBERG N10S Air Dryer – Technical Specifications Inlet / outlet connection (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Pressure dew point: 3°C Capacity: 1500 L/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L × W × H): 380 × 600 × 625 mm Weight: 31 kg Refrigerant type and quantity: R134a, 400 g 200 L Pressure Tank – Technical Specifications Weight: 80 kg Number of connections: 6 Connection sizes: 1/2", 1", 2" Overall dimensions: 166.5 × 45 cm Tank capacity: 200 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Included Accessories 1/2" plug – 2 pcs 1/2" nipple – 1 pc 1/2" tee fitting – 1 pc Iedpfxeyguq Ao Abneba 1/2" to 1/4" reducer – 1 pc 1/4" pressure gauge – 1 pc 1" to 3/4" reducer – 2 pcs 1/2" ball valve – 1 pc Important Notice! The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.