Used Between Dryer for sale (6,510)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ANB510NEU, total length: 1,030 mm, sweeping width: 580 mm, empty load weight: 220 kg, fuel type: electric, construction height: 1,045 mm, drive type: Elektro, construction width: 580 mm, Scrubber Dryer Chassis Number: ANB510NEU Condition: New Technical Condition: New Front Tyre Type: Polyurethane Front Tyre Condition: New Rear Tyre Type: Polyurethane Rear Tyre Condition: New Battery Voltage: 24V Iodpfey Upg Aox Aquoic Battery Capacity: 120Ah Battery Type: Lithium-ion Battery Year: 2025 Battery Condition: New Description: - Theoretical cleaning performance: 2,570 m² per hour - AI-based scrubber dryer robot for commercial areas - Autonomous navigation with advanced 3D LiDAR technology - Powerful NVIDIA Xavier AI edge computing chip for intelligent route planning and environment adaptation - High level of safety with 360° sensor technology - Robust, durable construction - Low-maintenance and updatable via OTA without technician

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NR1060NEU, total length: 1,800 mm, sweeping width: 1,060 mm, empty load weight: 477 kg, construction height: 1,350 mm, drive type: Lithium-Ionen, construction width: 1,150 mm, Scrubber Dryer Chassis Number: NR1060NEU Condition: New Equipment Technical Condition: New Front Tyres Condition: New Rear Tyres Condition: New Battery Voltage: 36V Battery Capacity: 200Ah Battery Type: Waterless Battery Year: 2025 Battery Condition: New Description: The NR1060 is a medium to large front-wheel drive scrubber dryer with twin brushes. - Delivers an efficient cleaning performance of 6,890 m² per hour. - The coarse dirt basket in the waste water tank effectively filters large debris to prevent drain blockages. - The entire machine features a modular and compact design for enhanced manoeuvrability and flexibility. - The low centre of gravity, thanks to the water tank and battery positioning, ensures high driving safety and easy maintenance. - Integrated waterproof touch panel design for intuitive operation: adjust driving speed, water flow, raise/lower brushes, etc. - Large LCD display shows machine settings and simplifies fault diagnostics and maintenance. - Standard electronic water level indicators for fresh and waste water tanks; intuitive and convenient display. Automatic alarm and shutdown when waste water tank is full. - One-touch soft start for the motor with overcurrent and undervoltage protection for the control electronics. - Patented disc brush quick-release design allows for easy automatic loading and unloading of brushes at the push of a button. - ECO mode reduces energy consumption and noise level – ideal for low-noise work environments. - Operating time of 5–6 hours per charge. - Non-slip, durable tyres ensure secure grip and optimal traction, even on smooth or damp floors. Isdpfjy Upgvsx Aquoic

Condition: used, functionality: fully functional, Girbau Gas Dryer 100 kg Iijdpfxoy Ugr No Aqujc

Condition: excellent (used), functionality: fully functional, Key operating parameters and performance: Drying temperature: from 30 °C to 160 °C (adjustable via a precise 3-point controller). Iiedpfx Ajy Ud T Requec Dew point: stable at approximately -60 °C, ensuring thorough drying of hygroscopic materials. Dry air flow rate: from 80 m³/h to 180 m³/h for devices in the compact series. Pre-drying time: reduced to only 3–4 hours for standard materials. Throughput: from 4 kg/h to 70 kg/h (values measured for Polyamide PA max).

Condition: used, functionality: fully functional, Textile Tunnel Dryer. Iiedpfx Aqev U D Ucjujc Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 2010, Internal item no.: 26046 Granulate drying plant + Multi-hopper system SOMOS D200 Year of manufacture: 2010 Iodpfx Aqjy R Rumsueic 10x hopper Including electrical wiring diagram and operating manual

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Iijdpex R D Efsfx Aqusc Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: good (used), Year of construction: 2000, Tempering unit Overall dimensions: 600 x 700 x 1600 mm Weight: 157 kg Power 6kW Voltage: 230 V Isdpfxsgvddps Aqusic Refrigerant type: R134.6

Condition: good (used), Year of construction: 1999, Compressed Air dyer Operating pressure: 13 - 18 bar Flow rate at 7 bar: 12,7 m^3/min Voltage: 400 V Iisdpjg Nk Abefx Aquoc Weight: 660 kg Overall dimensions: 1050 x 1550 x 1500 mm

Condition: new, No. 3183 Vacuum dryer / drying chamber ISVE ES 3 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1300 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Iiodou Tipkspfx Aqujc Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 790 mm Net wood volume: approx. 2,5 m3 Installed electrical power: 8,80 kW Average hourly power input: 4,4 kW/h Includes: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (65 m3/h / 1,8 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan of 0,37 kW each 380 VCa) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Granulate Dryer, Granulate Drying Unit, Hot Air Dryer, Used Machine Ijdpfx Aoxv R T Doqusic Manufacturer: MOTAN - Model: MDC400; Serial No.: 1753 (Year: 1999) - Airflow: 400 m³/h - Heating Capacity: 21 kW - Electrical Data: 400 V; 22.5 kW; 34.5 A

Condition: used, Motan NS-D05-SR-2, granulate loader and dryer, Motan granulate feeder, used machine Manufacturer: Motan Iedpfx Aoxlpv Njquoic Type: NS-D05-ST-2 Overall dimensions: 750 x 750 x 2500 mm Year: 1990 Tank volume : ~280 liters Electrical data: 240 V; 2.4 kW; 10 A - with granulate suction unit - with electric heating

Condition: new, No. 3187 Vacuum dryer / drying chamber ISVE ES 5 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1600 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Iijdpfxjvc Axpe Aquoc Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 1100 mm Timber pile height: 990 mm Net wood volume: approx. 5 m3 Installed electrical power: 16,01 kW Average hourly power input: 8 kW/h Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1,25 kW) - 2 internal condensers (turbofan of 0,55 kW each 380 VCa with stainless steel pipes) - 1 one-way valve (clapet: one ¾” for vacuum circuit) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Weight approx. 2900 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2011, PROD. KAESER TYPE DC108E S/N 9.5487.00010 1198 YEAR 2011 POWER (kW) CAPACITY (m3/min) 10.93 PRESSURE (bar) 5 / 16 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER BUILT-IN DRYER EXCHANGER COOLED (AIR/WATER) Iisdpsy T Ng Tsfx Aqujc ON TANK DOCUMENTS CONNECTION 2 NEW/USED USED

Year of construction: 2018, condition: like new (used), Atlas Copco GA 5 FF screw compressor including refrigerant dryer. Motor & Performance: • Rated power, main motor: 5.5 kW (7.5 HP) • Motor efficiency: Typically IE3 (protection class IP55) • Voltage / Frequency: 400 V / 50 Hz (3 phases) • Starting method: Star-delta Pressure and Flow Rate: 7.5 bar 15.0 l/s (900 l/min) ~54.0 m3/h 8.5 bar 13.2 l/s (792 l/min) ~47.5 m3/h 10 bar 12.5 l/s (750 l/min) ~45.0 m3/h 13 bar 8.4 l/s (504 l/min) ~30.2 m3/h Tank capacity: 270 l Integrated refrigerant dryer: • Pressure dew point: +3 °C • Additional power consumption: approx. 0.22 kW • Condensate drain: Electronic, loss-free Noise Level & Environment • Sound level: 60 to 63 dB(A) (very quiet due to complete encapsulation, installation directly at the workstation is possible) • Permissible ambient temperature: +1 °C to +46 °C Dimensions & Weight: • Length x Width x Height: approx. 1500 mm x 730 mm x 1710 mm • Weight: approx. 360 kg Control: • Type: Elektronikon Operating hours: 1170 h Isdpey T Ibvsfx Aqujic Year of manufacture: 2018 Price: 5000.-

Condition: used, Year of construction: 2019, machine/vehicle number: div., functionality: fully functional, 2x ROLLEX ironing presses, for pre-ironing (PRE-IRON); working width: 2.25 m, Iodpowpi Rkefx Aqueic Washing machine / dryer set Washing machine Milnor; load capacity: 65 kg; year: 2004 + Dryer Kannegiesser; load capacity: 50 kg; year: 2005 + Dryer Passat; load capacity: 50 kg; year: 1984

Condition: excellent (used), Year of construction: 2014, PROD. PARKER HIROSS TYPE ATT260 S/N 398616590001 YEAR 2014 POWER (kW) 13.5 CAPACITY (m3/min) 26 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) INVERTER BUILT-IN DRYER EXCHANGER COOLED (AIR/WATER) ON TANK DOCUMENTS YES Ijdpey Twahsfx Aquoic CONNECTION NEW/USED USED

Condition: used, - Manufacturer: Venjakob - Model: VEN DRY DTK 040 - Used machine - Working width: 1,300 mm - Working height: 880 ± 20 mm - Max. part height ~ 80 mm (more available as an option) - Length of nozzle drying channel 6,000 mm - Air velocity 25 m/s - Max. recirculating air flow rate 7,400 m³/h Iedoy Ragfopfx Aqueic - Min. supply air 900 m³/h - Min. exhaust air flow rate 900 m³/h - Max. drying temperature ~ 50 degrees - Heating capacity 57.2 kW - Air velocity max. 23 m/s - With heat exchanger, heating water PWW 90/70°C - Belt conveyor 6,500 mm - Feed speed continuously adjustable approx. 3.0 - 7.0 m/min - Location: Blomberg warehouse - Voltage, Hz: 400 / 50 - Electrical connection: 10 kW (4.6 + 1.5 kW) - Voltage fluctuations: max. +/- 5% - Without control valves and water pumps

Year of construction: 2024, condition: used, This listing is for the Frozen in Time F100 Automated Freeze Dryer & Frigel Chiller Package. The unit is in full working condition and is ready for immediate release Iiedpfey Tmrmex Aquec An exceptional opportunity to acquire a high-capacity, premium industrial freeze-drying setup purchased brand new in June 2024. This turnkey package pairs a high-performance Frozen in Time F100 Automated Freeze Dryer with a top-tier Frigel Air-Cooled Industrial Chiller Unit. Meticulously maintained and in excellent working condition, this system was built for reliable, continuous production. The current owner is transitioning away from the freeze-dried sweets market to refocus other business sectors, making this high-demand asset available immediately without the standard manufacturer build lead times. What’s Included in the Sale? - [x] 1 x Frozen in Time F100 Industrial Automated Freeze Dryer - [x] 1 x Frigel Industrial Air-Cooled Chiller Unit - [x] 3 x Complete Sets of Production Trays (To fully utilize the 22-slot configuration) - [x] Original Technical Documentation: Complete manufacturer specification sheets, engineering drawings, and manuals. Technical Specifications 1. Frozen in Time F100 Automated Freeze Dryer Designed specifically for food and industrial processes, the F100 handles the entire cycle from initial conduction freezing to final drying within a single pre-programmed sequence. - Manufacturer: Frozen in Time - Drying Capacity: Rated to freeze-dry 100kg+ of product per 16–24 hour cycle (dependent on product type). - Ice Condenser Capacity: 150kg - Ice Condenser Performance: 130kg / 24 hours - Ice Condenser Temperature: -60°C - Defrost System: Hot Gas - Shelves & Slots: 13 shelves featuring 22 tray slots. - Total Shelf Area: 10.4 m² - Shelf Spacing: 30mm - Chamber Temperature Range: -50°C to +90°C - Vacuum Pump: Premium Pfeiffer Duo 65 system - Refrigeration: Powerful 155m³/h Compressor utilizing R404A refrigerant - Unit Dimensions (H x W x L): 2.1m x 1.8m x 3.6m 2. Frigel Industrial Air-Cooled Water Chiller (MRS Series) An industrial-grade process cooling unit characterized by an ultra-efficient, small footprint designed to sit perfectly alongside processing machinery. - Manufacturer: Frigel - Compressor: High-reliability hermetic rotary Scroll compressor - Refrigerant: Ozone-friendly R410A - Condenser Technology: High-efficiency full-aluminium microchannel condenser. Delivers 20% to 40% higher heat exchange performance and a 60% weight reduction compared to conventional finned-tube models. - Working Parameters: Supports water working temperatures from 0°C to 25°C and is rated for high ambient temperatures up to 45°C. - Maintenance: Robust design that is exceptionally easy to clean using a standard pressure washer.

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Iisdpefz U Hvsfx Aqusc Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: used, System for filling yoghurt and quark into round plastic buckets of various sizes and for labelling them with self-adhesive shrink labels. The system consists of a separate filling/capping unit and a labeller. Filler/capper: The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam via a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place. Labeller: Continuous labelling machine for self-adhesive sleeve labels. Suitable for various bucket sizes with a capacity of 1–5 kg. Capacity filler/capper appr.: 450 units/h Based on a 6-litre bucket; depends on container size and product viscosity Capacity labeler appr.: 1080 units/h Formats: round plastic buckets ranging from 1 litre to 10 litres Iisdpfey Nnb Ujx Aqujc

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Used MTA DEIT165 refrigeration dryer 16.50 m3/min 16 bar Year of manufacture 2016 Iedpfx Asy Nkl Njqusic

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, power: 190 kW (258.33 HP), input voltage: 400 V, input current: 13 A, type of input current: AC, temperature: 95 °C, inner dimension length: 10,000 mm, inner dimension width: 3,000 mm, inner dimension height: 3,300 mm, total length: 10,500 mm, total width: 4,000 mm, total height: 3,800 mm, fuel type: electric, Equipment: CE marking, documentation/manual, Drying chamber / Recirculating drying chamber / Wood drying chamber / Drying system Mühlböck QLSF2120 Iodpfoy Sxw Eox Aqujic Technical data: Year of construction: 2007 Heating capacity: 190 kW Supply temperature: 95 degrees Electrical connection: 13A Fans: 6 x 0.75 kW

Condition: used, Year of construction: 2010, TA 5 compressed air refrigeration dryer, with a volume flow of up to 0.60 m³/min. Refrigerant: R134a Additional title: Compressed air dehumidifier Volume flow: 600 l/min. Overpressure: 16 bar Power: 0,29 kW Iiedsw Tduwepfx Aquoc Current: 2,0 A Voltage: 230 V Frequency: 50 Hz Position: free standing

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 12 months warranty, demonstration unit, very good condition, only approx. 250 operating hours, immediately available - according to DIN EN 1539 for solvent-based substances - Maximum temperature: 300 °C - Oven chamber: 750 x 750 x 750 mm (W x D x H) - External dimensions: 1510 x 1150 x 2200 mm (W x D x H) - Temperature controller: JUMO dTRON 04 - Permissible solvent quantity max. 19.30 g - Heating capacity: max. 21.78 kW, connected load 22.5 kVA, nominal current 32.6 A - Connection: 400V 3-phase/PE 50Hz - Cable with 63A plug, also available as fixed connection (fuse protection 35 or 50 A required) - incl. 1 piece mesh shelf Ijdpfx Asiq Uv Nsqujic - Weight 550 kg - Documentation Inspection in our warehouse by appointment. Oven, ovens, industrial oven, circulating air oven, chamber circulating air oven, tempering oven, heat oven, drying oven, conditioning oven, paint dryer, solvent oven