Used Between Dryer for sale (6,608)

Condition: good (used), Year of construction: 2010, Internal item no.: 26046 Granulate drying plant + Multi-hopper system SOMOS D200 Year of manufacture: 2010 10x hopper Ledpfx Aey R Rumsnueac Including electrical wiring diagram and operating manual

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Lodpfx Aex R D Efjnueac Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: good (used), Year of construction: 2000, Tempering unit Overall dimensions: 600 x 700 x 1600 mm Weight: 157 kg Power 6kW Voltage: 230 V Ljdjgvddpopfx Anujac Refrigerant type: R134.6

Condition: good (used), Year of construction: 1999, Compressed Air dyer Lajdpfxog Nk Abe Anusc Operating pressure: 13 - 18 bar Flow rate at 7 bar: 12,7 m^3/min Voltage: 400 V Weight: 660 kg Overall dimensions: 1050 x 1550 x 1500 mm

Condition: new, No. 3183 Vacuum dryer / drying chamber ISVE ES 3 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1300 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 790 mm Net wood volume: approx. 2,5 m3 Installed electrical power: 8,80 kW Average hourly power input: 4,4 kW/h Includes: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (65 m3/h / 1,8 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan of 0,37 kW each 380 VCa) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Ljdju Tipkepfx Anuoac Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Granulate Dryer, Granulate Drying Unit, Hot Air Dryer, Used Machine Lajdpfoxv R T Djx Anujc Manufacturer: MOTAN - Model: MDC400; Serial No.: 1753 (Year: 1999) - Airflow: 400 m³/h - Heating Capacity: 21 kW - Electrical Data: 400 V; 22.5 kW; 34.5 A

Condition: used, Motan NS-D05-SR-2, granulate loader and dryer, Motan granulate feeder, used machine Lodpfx Aoxlpv Nonueac Manufacturer: Motan Type: NS-D05-ST-2 Overall dimensions: 750 x 750 x 2500 mm Year: 1990 Tank volume : ~280 liters Electrical data: 240 V; 2.4 kW; 10 A - with granulate suction unit - with electric heating

Condition: new, No. 3187 Vacuum dryer / drying chamber ISVE ES 5 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1600 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 1100 mm Timber pile height: 990 mm Net wood volume: approx. 5 m3 Lodsvc Axpopfx Anuoac Installed electrical power: 16,01 kW Average hourly power input: 8 kW/h Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1,25 kW) - 2 internal condensers (turbofan of 0,55 kW each 380 VCa with stainless steel pipes) - 1 one-way valve (clapet: one ¾” for vacuum circuit) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Weight approx. 2900 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2011, PROD. KAESER TYPE DC108E S/N 9.5487.00010 1198 YEAR 2011 POWER (kW) CAPACITY (m3/min) 10.93 PRESSURE (bar) 5 / 16 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER BUILT-IN DRYER EXCHANGER COOLED (AIR/WATER) ON TANK DOCUMENTS Lajdpjy T Ng Tsfx Anujc CONNECTION 2 NEW/USED USED

Year of construction: 2018, condition: like new (used), Atlas Copco GA 5 FF screw compressor including refrigerant dryer. Motor & Performance: • Rated power, main motor: 5.5 kW (7.5 HP) • Motor efficiency: Typically IE3 (protection class IP55) • Voltage / Frequency: 400 V / 50 Hz (3 phases) • Starting method: Star-delta Pressure and Flow Rate: 7.5 bar 15.0 l/s (900 l/min) ~54.0 m3/h 8.5 bar 13.2 l/s (792 l/min) ~47.5 m3/h 10 bar 12.5 l/s (750 l/min) ~45.0 m3/h 13 bar 8.4 l/s (504 l/min) ~30.2 m3/h Ledjy T Ibvopfx Anusac Tank capacity: 270 l Integrated refrigerant dryer: • Pressure dew point: +3 °C • Additional power consumption: approx. 0.22 kW • Condensate drain: Electronic, loss-free Noise Level & Environment • Sound level: 60 to 63 dB(A) (very quiet due to complete encapsulation, installation directly at the workstation is possible) • Permissible ambient temperature: +1 °C to +46 °C Dimensions & Weight: • Length x Width x Height: approx. 1500 mm x 730 mm x 1710 mm • Weight: approx. 360 kg Control: • Type: Elektronikon Operating hours: 1170 h Year of manufacture: 2018 Price: 5000.-

Condition: used, Year of construction: 2019, machine/vehicle number: div., functionality: fully functional, 2x ROLLEX ironing presses, for pre-ironing (PRE-IRON); working width: 2.25 m, Washing machine / dryer set Washing machine Milnor; load capacity: 65 kg; year: 2004 Lsdpowpi Rksfx Anueac + Dryer Kannegiesser; load capacity: 50 kg; year: 2005 + Dryer Passat; load capacity: 50 kg; year: 1984

Condition: excellent (used), Year of construction: 2014, PROD. PARKER HIROSS TYPE ATT260 S/N 398616590001 YEAR 2014 POWER (kW) 13.5 CAPACITY (m3/min) 26 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) INVERTER BUILT-IN DRYER EXCHANGER COOLED (AIR/WATER) ON TANK DOCUMENTS YES Lasdpfxjy Twahj Anuoc CONNECTION NEW/USED USED

Condition: used, - Manufacturer: Venjakob - Model: VEN DRY DTK 040 - Used machine - Working width: 1,300 mm Ledpfx Aey Ragfjnueac - Working height: 880 ± 20 mm - Max. part height ~ 80 mm (more available as an option) - Length of nozzle drying channel 6,000 mm - Air velocity 25 m/s - Max. recirculating air flow rate 7,400 m³/h - Min. supply air 900 m³/h - Min. exhaust air flow rate 900 m³/h - Max. drying temperature ~ 50 degrees - Heating capacity 57.2 kW - Air velocity max. 23 m/s - With heat exchanger, heating water PWW 90/70°C - Belt conveyor 6,500 mm - Feed speed continuously adjustable approx. 3.0 - 7.0 m/min - Location: Blomberg warehouse - Voltage, Hz: 400 / 50 - Electrical connection: 10 kW (4.6 + 1.5 kW) - Voltage fluctuations: max. +/- 5% - Without control valves and water pumps

Year of construction: 2024, condition: used, This listing is for the Frozen in Time F100 Automated Freeze Dryer & Frigel Chiller Package. The unit is in full working condition and is ready for immediate release An exceptional opportunity to acquire a high-capacity, premium industrial freeze-drying setup purchased brand new in June 2024. This turnkey package pairs a high-performance Frozen in Time F100 Automated Freeze Dryer with a top-tier Frigel Air-Cooled Industrial Chiller Unit. Meticulously maintained and in excellent working condition, this system was built for reliable, continuous production. The current owner is transitioning away from the freeze-dried sweets market to refocus other business sectors, making this high-demand asset available immediately without the standard manufacturer build lead times. What’s Included in the Sale? - [x] 1 x Frozen in Time F100 Industrial Automated Freeze Dryer - [x] 1 x Frigel Industrial Air-Cooled Chiller Unit - [x] 3 x Complete Sets of Production Trays (To fully utilize the 22-slot configuration) - [x] Original Technical Documentation: Complete manufacturer specification sheets, engineering drawings, and manuals. Technical Specifications 1. Frozen in Time F100 Automated Freeze Dryer Designed specifically for food and industrial processes, the F100 handles the entire cycle from initial conduction freezing to final drying within a single pre-programmed sequence. - Manufacturer: Frozen in Time - Drying Capacity: Rated to freeze-dry 100kg+ of product per 16–24 hour cycle (dependent on product type). - Ice Condenser Capacity: 150kg Ljdpfsy Tmrmjx Anueac - Ice Condenser Performance: 130kg / 24 hours - Ice Condenser Temperature: -60°C - Defrost System: Hot Gas - Shelves & Slots: 13 shelves featuring 22 tray slots. - Total Shelf Area: 10.4 m² - Shelf Spacing: 30mm - Chamber Temperature Range: -50°C to +90°C - Vacuum Pump: Premium Pfeiffer Duo 65 system - Refrigeration: Powerful 155m³/h Compressor utilizing R404A refrigerant - Unit Dimensions (H x W x L): 2.1m x 1.8m x 3.6m 2. Frigel Industrial Air-Cooled Water Chiller (MRS Series) An industrial-grade process cooling unit characterized by an ultra-efficient, small footprint designed to sit perfectly alongside processing machinery. - Manufacturer: Frigel - Compressor: High-reliability hermetic rotary Scroll compressor - Refrigerant: Ozone-friendly R410A - Condenser Technology: High-efficiency full-aluminium microchannel condenser. Delivers 20% to 40% higher heat exchange performance and a 60% weight reduction compared to conventional finned-tube models. - Working Parameters: Supports water working temperatures from 0°C to 25°C and is rated for high ambient temperatures up to 45°C. - Maintenance: Robust design that is exceptionally easy to clean using a standard pressure washer.

Condition: used, System for filling yoghurt and quark into round plastic buckets of various sizes and for labelling them with self-adhesive shrink labels. The system consists of a separate filling/capping unit and a labeller. Filler/capper: The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam via a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place. Labeller: Continuous labelling machine for self-adhesive sleeve labels. Suitable for various bucket sizes with a capacity of 1–5 kg. Capacity filler/capper appr.: 450 units/h Based on a 6-litre bucket; depends on container size and product viscosity Capacity labeler appr.: 1080 units/h Formats: round plastic buckets ranging from 1 litre to 10 litres Lasdpfxjy Nnb Ue Anuec

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Lodefz U Hvjpfx Anuoac Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Used MTA DEIT165 refrigeration dryer 16.50 m3/min Lodsy Nkl Nopfx Anujac 16 bar Year of manufacture 2016

Condition: used, Year of construction: 2010, TA 5 compressed air refrigeration dryer, with a volume flow of up to 0.60 m³/min. Refrigerant: R134a Additional title: Compressed air dehumidifier Volume flow: 600 l/min. Overpressure: 16 bar Power: 0,29 kW Ledpfx Aow Tduwenuoac Current: 2,0 A Voltage: 230 V Frequency: 50 Hz Position: free standing

Condition: good (used), Year of construction: 2002, machine/vehicle number: 2344, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 400 V, total length: 800 mm, total width: 600 mm, total height: 1,400 mm, overall weight: 100 kg, For sale is a hot air container dryer, model CKT 70, from the renowned manufacturer Werner Koch Maschinentechnik. This unit is specifically designed for the efficient drying of plastic granulates, and with a heating capacity of 6 kW, it delivers consistent performance to meet industrial requirements. Ljdpfxsy I Rpfs Anuoac Transport and loading can be arranged across Europe upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges are welcome! Machinery Trade PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you in need of a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your equipment? For more information or to get in touch, please visit our website.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, power: 190 kW (258.33 HP), input voltage: 400 V, input current: 13 A, type of input current: AC, temperature: 95 °C, inner dimension length: 10,000 mm, inner dimension width: 3,000 mm, inner dimension height: 3,300 mm, total length: 10,500 mm, total width: 4,000 mm, total height: 3,800 mm, fuel type: electric, Equipment: CE marking, documentation/manual, Drying chamber / Recirculating drying chamber / Wood drying chamber / Drying system Mühlböck QLSF2120 Technical data: Year of construction: 2007 Heating capacity: 190 kW Lodpfsy Sxw Eex Anusac Supply temperature: 95 degrees Electrical connection: 13A Fans: 6 x 0.75 kW

Condition: refurbished (used), Year of construction: 2024, operating hours: 250 h, functionality: fully functional, machine/vehicle number: 325, type of input current: three-phase, total length: 1,300 mm, year of last overhaul: 2026, working width: 900 mm, tank capacity: 60 l, total width: 400 mm, total height: 1,200 mm, overall weight: 550 kg, This is an older version of the FD440 with a tray height of 33 mm (new machines are 50 mm). The machine is fully overhauled. The new model's price is 36,900 EUR. The machine comes with a 28m3 oil rotary vacuum pump from Edwards. Ledpsyut Hrefx Anujac Extraction capacity: 60 kg The new model can be found here.

Condition: new, Year of construction: 2026, power: 1.5 kW (2.04 HP), input voltage: 400 V, total length: 600 mm, total width: 600 mm, total height: 1,400 mm, overall weight: 300 kg, pressure: 9.8 bar, tank capacity: 50 l, warranty duration: 12 months, HySpriz RK50U 3-in-1 Forming System for Meat Snacks, Pet Sticks & Mini Salami | Up to 1500kg/shift Made in Ukraine. 18 month full warranty. RK50U — universal casing-free forming system for meat sticks, jerky & sausage production HydroShpriz RK50U is a powerful piston-driven filling and forming machine engineered for small and mid-size manufacturers starting production of meat sticks, salami snacks, pet food, kibbeh, fruit bars, and more. Ideal for dry-cured snacks without alginate casing. Strong, compact, and easy to operate — it’s the perfect choice to start your line and grow with Trade-In options. ⸻ Technical specifications • Drive: hydraulic piston • Piston force: 94 kN • Power: 1.5 kW, 380 V, 50 Hz • External dimensions: 1050×550×950 mm • Weight: approx. 300 kg • Material: full stainless steel, food-grade • Certification: CE certified, built for continuous 8-hour production cycles ⸻ Configuration & possibilities • Gearbox-driven filler for thick and sticky emulsions down to –2 °C • Multi-nozzle head: up to 25 lanes simultaneously • Round nozzle set: 8 mm to 22 mm for meat or fish sticks • Flat nozzle set: 25 mm to 200 mm width, 3–5 mm height — ideal for jerky/strips • Sausage stuffing set: for traditional casing sausages Ledpfxomrpvye Anusac • Overhead tray holder: for direct forming onto drying racks • Trolley integration: fits perfectly with our 30-row drying racks (60 trays) • Integrated time-based portioning unit with ±8% accuracy • 24V remote signal: compatible with automatic clippers (PolyClip, Compa, etc.) • Optional vacuum connection: for better product density and shelf-life ⸻ Production capacity • From 20 kg to 1,600 kg per 8 hours depending on product shape, tray format and nozzle type ⸻ Availability ✔️ In stock at official distributors in: • Austria • Poland • United Kingdom • Lithuania • Australia • South Africa • United States Delivery worldwide. Training, test batch, and spare parts included. ⸻ Made in Ukraine. CE sertified industrial forming system • meat snack production • pet food production • jerky, salami, kebab machine • food processing equipment

Condition: like new (used), Year of construction: 2023, operating hours: 10,626 h, functionality: fully functional, Used Atlas Copco FD220VSD-G Refrigerated Dryer - Premium Lajdpfx Ajy Iwtdonuoc 13.20 m³/min 14 bar Year of manufacture: 2023 Operating hours: 10,626

Condition: excellent (used), Year of construction: 2016, operating hours: 64,020 h, functionality: fully functional, Used Atlas Copco FD285 refrigerated dryer 17.10 m³/min Lajdjy Iwc Espfx Anusc 14 bar Year of manufacture: 2016

Condition: used, Year of construction: 2000, Used Bottle Washer Dryer Cames WDT8 Laedpfx Ajvgt Ucsnuoc  Introduction Firstly, the Cames WDT8 is a highly effective and reliable solution for the bottling industry. Specifically, this advanced washing and drying system is designed to ensure optimal bottle treatment, combining cutting-edge technology with precision engineering. Moreover, the machine is encased in stainless steel, offering robustness and longevity, coupled with safety features to ensure secure operation. Technical Features of Washing Secondly, the Cames WDT8 is equipped with an 8-head brush carousel for washing. This system effectively treats bottles, ensuring deep and uniform cleaning. Importantly, the carousel’s primitive diameter is 480 mm with a pitch of 188.4 mm, demonstrating its efficiency in handling various bottle sizes. Drying and Energy Efficiency Additionally, a distinctive element of the Cames WDT8 is its two-way drying tunnel, complete with blades and blowers, and a heated blowing bar with resistances at the top. This configuration ensures quick and effective drying, reducing processing time and increasing productivity. Notably, with a total power of 15.25 Kw and water consumption between 120 and 220 l/h, the system shows high energy efficiency. Production Capacity and Versatility Furthermore, the production capacity of this Bottle Washer Dryer ranges from a minimum of 2,750 bottles per hour to a maximum of 5,500 bottles per hour, offering great versatility for different production needs. The machine can handle a cylindrical bottle format, with the bottle entry positioned on the left, facilitating integration into the existing workflow. Conclusions of the used washer dryer Cames WDT8 In conclusion, the Bottle Washer Dryer Cames WDT8 is an excellent choice for those seeking a used bottle washing and drying system that combines high efficiency, versatility, and safety. Its robust design and advanced technical features make it a wise investment for any company in the bottling industry.