Used Bench Saw for sale (7,918)

Condition: excellent (used), Catalogue number 7757 TECHNICAL DATA Milling machine - Spindle diameter: 25mm - Spindle height: 120mm - Interchangeable spindle, tiltable 20 degrees - Spindle locking - Height adjustable (up/down) - Original guide fence Ncedpfx Alsy Tudwsnju - Table dimensions: 1120x750mm - 4 spindle speed settings - Motor: 3.8 kW Circular saw - Max blade diameter: 350mm - Spindle axis: 30mm - Blade adjustable (up/down and angle) - Spindle locking - Cutting width at fence: 540mm - Cast iron table - Dimensions (L/W/H): 1260x900x1000mm - Weight: 610kg ADVANTAGES – Made in Poland – DTR documentation available – Used milling machine, very good condition Net price: 6900 PLN Net price: 1640 EUR (based on exchange rate 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7116 TECHNICAL DATA - Wheel diameter: 630 mm - Table dimensions: 880x700 mm - Table adjustable at an angle - Motor: 3 kW - Max cutting height: 300 mm - Throat (blade to frame): 580 mm - Extraction nozzle diameter: 90 mm - 2 speed settings - Brake Ncodpfxjy Snx Sj Alnou - Dimensions (L/W/H): 1200x920x2250 mm - Weight: 702 kg ADVANTAGES – Manufactured in Poland – DTR technical documentation – Very good condition – Used saw Net price: 8,500 PLN Net price: 2,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major fluctuations in the exchange rate, the price may change)

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW Nedpfxey R Dvdo Alnscu - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum element width: 700 mm - Working width of arbor with saw blades: 530 mm - Maximum blade diameter: 450 mm (currently fitted: 350 mm) - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers - Arbor with saw blades - Smooth feed roller - 4 feed speed options Nodey Rrywjpfx Alnecu - Feed motor approx. 2 kW - Main motor 30 kW - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg – Made in Poland – Used machine, condition: very good Net price: 38,900 PLN Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.

Condition: excellent (used), CATALOGUE NUMBER 7602 TECHNICAL SPECIFICATIONS - Sharpening speed: automatic - Cooling - Belt support arms - Grinding wheel size: 120 mm - Motor power: 0.17 kW, 400 V - Dimensions (L/W/H): 500x700x1200 mm - Weight: 120 kg Ncedpfx Ajy Snyvelnju ADVANTAGES – Made in Poland – Unpainted – Belt support arms – Used sharpening machine – Very good condition Net price: 4,900 PLN Net price: 1,160 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7051 TECHNICAL SPECIFICATIONS - Wheel diameter: 630 mm - Table dimensions: 890x710 mm - Table adjustable in angle - Motor: 3 kW - Max cutting height: 240 mm Nedpfxoy R A E De Alnscu - Throat (band to frame): 570 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 1250x800x2300 mm - Weight: 681 kg ADVANTAGES – Manufactured in Poland – Very good condition – Used saw Net price: 7,900 PLN Net price: 1,880 EUR depending on the rate 4.2 EUR (Prices subject to change in case of significant fluctuations)

Year of construction: 2005, condition: used, Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Pneumatic tilting of the angles between 45 and 90 degrees Digital Angle Indicators Feed with 2-hand operation Roller beds and length stops on request Ncodpfxjzf Agze Alnsu Weight: approx. 1,000 kg

Condition: new, Year of construction: 2024, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 218 Eco AutoCut double mitre bandsaw Speed: 25-80 m/min - Mitre left 60° - For cutting steel, stainless steel and aluminum profiles - Quick-clamping vice with quick-clamping device a. - Built-in blade tension control b. - Saw blade guide made of carbide c. - Electric automatic cooling system Nsdpfot I R Edex Alnecu - Machine base (supplied disassembled) The AutoCut system consists of: - Hydraulic cylinder, feed control, spring assembly, limit switch and enables three work sequences: 1. automatic lowering of the saw frame via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at the end of the cut 2. high-speed lowering of the saw frame from the rest position up to the workpiece, then switching to normal saw feed 3. manual operation - hydraulic cylinder works as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: excellent (used), Working travels 450 x 260 x 560 mm Spindle stroke 120 mm cross table 770 x 320 mm Drilling capacity 25 mm Spindle speeds 55 - 9200 Rpm Nsdpfstpgcnox Alnecu With DRO With Threading attachement Misc accessories MARCELS MASCHINEN CH

Condition: excellent (used), Drilling capacity -20 mm Spindle taper FEHLMANN Spindle speeds 50-6300 rpm Throat 276 mm Cross table 530 x 255 mm Njdpeuy Sazsfx Alnscu Digital read-out Accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Ncjdpfoxnlgcex Alnju

Condition: good (used), Late model APC turret saw. Has been cutting frozen loins into chops. Ncjdpfxstq A Nxs Alnsu

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Price has just been reduced and will not reduce any further. Please only enquire if you want to buy it at this price before we scrap it as space is needed. Ncsdpfsrubg Hjx Alnsu

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Tilting angle 45° Cutting length on cart 750mm Blade diameter max 250mm. Cutting height 75mm. Nedpfx Asufgnzjlnocu Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Table size 1000x630mm

Condition: excellent (used), I sell a massive band saw for cutting metal in bdb condition. Ncsdpfou Udrijx Alnsu

Condition: excellent (used), Year of construction: 1966, I sell a circular saw made in Germany. Company Eisele model vms II in good condition Ncodpfx Aevbwfnelnou

Condition: used, Year of construction: 2009, Large, robust saw from the renowned manufacturer MEP SHARK CCS HYDRA - Fully semi-automatic - Cutting diameter for round stock: 300 mm - Capacity: 320x260 mm - Swivel LEFT/RIGHT - Saw band: 3320x27x0.9 mm Ncodpfjy Ani Eex Alnju - Coolant pump - Automatic vise pressure - Machine weight: 700 kg - Original roller table (100 kg) - Includes 3 new saw bands - Original documentation The machine is original, in very good technical condition, ready for operation. Can be viewed in Głosków near Warsaw.

Condition: used, Year of construction: 1998, Sliding carriage: 5000 mm Motor: 11 kW / 15 hp Cutting width: 1050 mm, without scoring blade, prepared for scoring blade Tip Servo Drive Njdpfx Aey Tl Exslnscu Laser-cut seam indicator Electromotive height and swivel adjustment Dimensions: 5000 x 1400 x 1900 mm Weight: approx. 1100 kg Location: Nattheim

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 12 kW (16.32 HP), cutting width (max.): 4,200 mm, Nimac Atlas 100T , Beam Saw , Year 2021 Ncsdpfx Alozg Tfqsnou With bac Loading and front loading , Very Good condition Fully Functional Great Price ! For More Info please contact Us !

Condition: good (used), Wheel diameter 400 mm Cutting height 300 mm cutting width 380 mm Motor output 2,2 kW Table dimensions 600 x 450 mm machine weight ab. 242 kg Ncodpszfqk Usfx Alneu

Condition: good (used), Year of construction: 1994, Sawblade tiltable 45 ° Length of the rolling table 2800 mm cutting width 1250 mm Motor output 5,5 kW Cutting height 150 mm weight of the machine ca. 1100 kg Ncedpfjzfqkuox Alnou

Condition: excellent (used), CATALOG NUMBER 72133 TECHNICAL DATA - Maximum cutting height: 180 mm - Track width: 400 mm - Shaft width: 370 mm - Shaft diameter: 60 mm - Maximum blade diameter: 300 mm - Blade bore diameter: 80 mm - Minimum workpiece length: 630 mm - Maximum workpiece width: 600 mm From above: - Pneumatic hold-down - Pawls - 2 metal pressure rollers - Pawls - Saw shaft - Smooth pressure roller Ncodjzfpy Iopfx Alneu - Pawls - Smooth pressure roller From below: - 2 metal, toothed feed rollers - Pawls - Track - Saw shaft - Track - Stepless feed speed adjustment via inverter - Main motors 2x55 kW - Feed motor 4 kW - Hydraulic lifting of the top/bottom frame - Hydraulic adjustment of saw shafts - Pump motor 0.37 kW - Central lubrication - Suction connector diameter: 1x300 mm, 1x380 mm - Dimensions (LxWxH): 3200x2350x2000 mm - Weight approx. 5500 kg ADVANTAGES – Italian manufacture – Double-shaft – Used multi-blade saw, in very good condition Net price: PLN 238,900 Net price: EUR 56,880 Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7886 TECHNICAL DATA - Max blade diameter: 450mm - Blade bore diameter: 30mm - Blade guard - Height-adjustable arm (up/down) - Max cutting height: 120mm - Max cutting width: 540mm - Hydraulic saw feed - 2 infeed rollers integrated in table Ncjdpfx Aljzfpu Ejnju - Outfeed roller integrated in table - Motor: 3.7kW - Hydraulic pump motor approx. 0.55kW - Extraction nozzle diameter: 110mm - Roller width: 530mm - Machine dimensions (L/W/H): 1910x1370x1820mm - Weight: 657kg ADVANTAGES – Polish manufacture – Technical documentation (DTR) – Very good condition – Used saw Net price: 14,900 PLN Net price: 3,550 EUR (depending on exchange rate 4.2 EUR) (Prices may change significantly with currency fluctuations)

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 120 mm, cutting width (max.): 300 mm, saw blade diameter: 350 mm, height adjustment type: mechanical, saw blade bore: 70 mm, actuation type: electric, - Operating manual, DTR - Italian production TECHNICAL SPECIFICATIONS: - Track width: 300 mm - Cutting height: 120 mm - Max. blade diameter: 350 mm - Motor power: 30 kW - Table width: 750 mm - Min. workpiece length: 600 mm - Feed speed adjustable via gearmotor - Three rows of anti-kickback pawls - Possibility to mount a board – shoe - Spindle diameter: 50 mm - Sleeve diameter: 70 mm Ncedpeym Ag Ssfx Alnou - Sleeve equipped with spacers - Automatic central lubrication - Four upper feed rollers - Extraction port diameter: 200 mm - Machine dimensions (L/W/H): 155 / 165 / 160 cm - Weight: 1800 kg

Condition: excellent (used), CATALOG NUMBER 7890 Technical specifications: - Track width: 245 mm Ncjdpfey Rtbijx Alneu - Shaft width for edger: 380 mm - Shaft width for multi-blade saw: 320 mm - Max. blade diameter: 350 mm - Blade bore diameter for edger: 80 mm - Blade bore diameter for multi-blade saw: 65 mm - Max. cutting height: 120 mm - Table width (clearance): 900 mm - Table length: 1,780 mm Top components: - Pawls/kickback devices - Smooth pressure roller - Pawls - Smooth pressure roller - Short element insert - Shaft with saw blades - 2 smooth pressure rollers Bottom components: - Guide - Pawls/kickback devices - Track - Centralized lubrication - Laser - Stepless feed speed adjustment - Feed motor: 1.1 kW - Main motor: 30 kW - Manual body height adjustment - Manual saw shaft adjustment - Extraction outlet diameter: 210 mm - Overall dimensions (L x W x H): 1900 x 1500 x 1800 mm - Approximate weight: 2,000 kg ADVANTAGES – Made in Germany – Stepless feed speed adjustment – Shaft with floating blade for edging – Sleeve for multi-blade saw included – Laser – Short element insert – Used multi-blade saw, in very good condition Net price: PLN 55,900 Net price: EUR 13,300 (based on exchange rate of 4.2 EUR/PLN) (Prices are subject to change depending on exchange rate fluctuations)