Used Bench Saw for sale (7,959)

Condition: used, Year of construction: 2005, Used machine Lhodpfx Aiewqifksieh Year of manufacture: 2005 Condition: Guides slightly worn, only suitable for rough cutting Equipment and technical data: - Cutting length: 4300 mm - Max. passage height: 2200 mm - Max. trimming height: 2100 mm - Max. scoring height vertical: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4500 rpm - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 mm Availability: short-term Storage location: Flörsheim

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Motor: 400 V / 5.0 kW Speed: 2800 rpm Cutting length: 420 mm Cutting width: 420 mm at 90° 295 mm at 45° Cutting height: 200 mm at 90° 140 mm at 45° The saw can be tilted to an acute angle of approximately 25° on one side and tilted flat to the left up to 30°. Saw blade diameter: 520 mm x 50 mm Dust extraction port diameter: 100 mm Weight: 250 kg Lhodpfokwhmfex Aiioh With the following optional equipment: - Carbide-tipped circular saw blade 520x4.0/2.8 x 50, 60 teeth, for wood - Machine can be tilted on both sides from the front using a hand crank Availability: short notice / 2022 Location: Solingen

Condition: used, Year of construction: 2002, Used machine Year of manufacture: 2002 Cutting area: 4200 x 4200 mm Maximum cutting height: 80 mm Saw blade protrusion: 92 mm Main saw motor: 11 kW Scoring saw motor: 2.2 kW Total electrical connected load: 19.5 kW, 41 amperes Required air pressure: 8 bar Extraction: 4000 m³/h Saw feed speed, stepless: 0 - 70 m/min Rip fence speed: 0 - 80 m/min (max. output: 25 m/min) Main saw blade: 350 x 4.4 x 30 Z 72 TF Scoring saw blade: 180 x 4.4/5.4 x 30 Z 28 VR conical Ljdpsyt Tkuofx Aiiohh Net weight approx. 6000 kg Availability: by arrangement Storage location: Rhineland-Palatinate

Condition: used, Year of construction: 2004, saw blade diameter 225 x 32 mm Lhedpfezginnsx Aiish cutting diameter max. 70 mm bei 90° mm miter cut 0°-45°-60° miter cut 1° Skala spindle turning speed range 42 / 84 U/min Max. round cutting cross-section at 90°: 70 mm Max. rectangular cutting cross-section at 90°: 80 x 50 mm Max. round cutting cross-section at 45°: 64 mm Max. rectangular cutting cross-section at 45°: 60 x 50 mm Saw blade diameter: 225 mm Bore diameter: 32 mm Includes lubrication system Includes base frame

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Effective cutting length: 4000 mm Blade diameter: 450 mm Pneumatic tilting of the cutting heads Tilting angle: 90-45/20° Lhedpfozgifasx Aiieh Sensor

Condition: reconditioned (used), functionality: fully functional, Effective cutting length: 4000 mm Blade diameter: 450 mm Pneumatic tilting of the cutting heads Ljdpjzgh Umsfx Aiishh Tilting angle: 90-45°

Condition: used, Year of construction: 2013, total height: 2,220 mm, total length: 6,100 mm, total width: 2,350 mm, Colour: Grey Weight: 6.000 kg Horizontal band saw machine High point HP-400 Year of construction 2013 Serial number 213-051 Lsdewnhn Ejpfx Aiiohh Saw wheel diameter 860 mm Maximum cutting width 400 mm Motor 22kW (30hp) (Per piece!) Conveyor belt in poor condition. - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: 213-051 - Transport dimensions: 6100mm x 2350mm x 2220mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, total length: 5,510 mm, total width: 1,720 mm, total height: 2,920 mm, Colour: White Weight: 950 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Max. cutting height vertical [mm]: 2150 - Max. cutting height horizontal [mm]: 2070 - Max. cutting width [mm]: 5300 Lodpsx Agv Uefx Aiishh - Max. cutting depth [mm]: 80 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 300 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Current consumption [A]: 8 - Fuse [A]: 16 - Power [kW]: 4.0 - Transport dimensions: 5510mm x 1720mm x 2920mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1992, Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Alzmetall, Pillar drilling machine type AX2 S -Spindle mount: MK2 -Motor: 0.37 / 0.55 kW -Speed adjustment: stepless -Speeds: 450 - 4300 rpm -Table size: 250 x 250 mm -Travel distance: 560 mm Lhsdpfx Aieyv Ahveish -Spindle stroke: 90 mm -Protrusion: 250 mm -Column Ø: 90 mm -Dimensions: 720/540/H1650 mm -Weight: 145 kg

Condition: used, Year of construction: 2014, total length: 3,400 mm, total width: 1,200 mm, total height: 2,880 mm, Colour: White Empty weight: 1.500 kg - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 183610114 - Main motor power [kW]: 1.5 - Press drive: Hydraulic - Max. clamping width [mm]: 3000 - Max. clamping height [mm]: 1710 - Max. clamping depth [mm]: 100 - Number of cylinders [pcs]: 4 - Cylinder stroke [mm]: 1200 - Options: Remote control, Horizontal/vertical cylinders separately controlled - Voltage [V]: 400 - Current consumption [A]: 3.5 Lsdjzgbugspfx Aiiohh - Fuse [A]: 16 - Power [kW]: 1.5 - Transport dimensions: 3400mm x 1200mm x 2880mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), single-head miter saw blade diameter 450 fence with electronic positioning, length 4200 mm Lhodpfx Aiezgbbgeijh outfeed roller conveyor

Condition: used, Technical details: bore capacity in steel (diameter): 2-20 mm throat: 210 mm bore stroke: 100 mm Distance spindle/table max.: 450 mm Ledpfxozgaiio Aiishh range of revolution per miute: I : 450-1800 + II: 900-3550 / 4step U/min spindle taper MT: 2 table surface area: 340x280 mm total power requirement: 1,1 kW machine weight ab.: 165 kg transport dimensions LxWxH: 0,6 x 0,5 x 1,28 m Robust industrial drilling machine manufactured in the former East Germany by the "Fritz Heckert" Machine Tool Combine. Equipped with a 1.1 kW motor, 380 V three-phase power supply, and a machine weight of approximately 165 kg. Precision machine suitable for drilling, countersinking, and light reaming operations. Solid cast-iron construction, ideal for toolmaking, workshops, maintenance departments, and training facilities. *

Condition: good (used), Year of construction: 1993, COSMEC SM 400 multi-saw - after the technical review - very good condition - Italian production - year of production 1993 TECHNICAL PARAMETERS: cutting width 400 mm Lsdpjgyz Rvefx Aiiehh cutting height 160 mm engine power 37 kW smoothly adjustable feed speed spindle diameter 55 mm sleeve diameter 70 mm four rows of anti-recoil pawls the three upper pressure rollers table width 710 mm minimum element length 700 mm shaft height adjustment guide ruler laser central lubrication spigot diameter 200 mm dimensions of the machine (length / width / height) 220/190/180 cm weight 1800 kg

Condition: excellent (used), CATALOGUE NUMBER 8018 TECHNICAL DATA - max. blade diameter 400mm - blade bore diameter 30mm - blade guard - adjustable arm (up/down) - max. cutting height 100mm - max. cutting width 540mm - hydraulic blade feed - 2 infeed rollers on the table - outfeed roller on the table - motor 3.7kW - hydraulic pump motor approx. 0.55kW - diameter of dust extraction port 100mm - roller width 530mm - dimensions of the infeed roller table 2000x640x910mm - dimensions of the outfeed roller table with scale 2000x640x965mm - machine dimensions (L/W/H) 1900x1540x1820mm - weight approx. 750kg ADVANTAGES Ledozf Iyyepfx Aiishh – manufactured by the Polish brand REMA – DTR documentation (Technical Documentation) – roller tables – very good condition – used saw Net price: 15900 PLN Net price: 3786 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 8026 TECHNICAL DATA: - Max. cutting length: 3100 mm - Max. cutting height: 80 mm - Max. cutting width: 570 mm - Main saw motor power: 10 kW - Blade diameter: 450 mm - Work table height: 850 mm - Work table width: 660 mm - Dust extraction port diameter: 1x160 mm, 1x170 mm - Overall dimensions (L/W/H): 5500x2100x1600 mm - Weight: approximately 2500 kg ADVANTAGES: - Suitable for trimming boards - Used saw, very good condition Lhjdpfx Aiozf Ixpoish Net price: 29900 PLN Net price: 7119 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2011, cutting height (max.): 430 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height: 430 mm Lhedpozf H Szjfx Aiieh EQUIPMENT CE marking 1 saw blade unit (tilting) The machine is sold and delivered in its current and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents for descriptive purposes. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8580

Condition: not inspected (used), Year of construction: 2014, cutting depth: 123 mm, plate length: 2,200 mm, plate width: 4,500 mm, table length: 4,500 mm, table width: 2,200 mm, TECHNICAL DETAILS Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum cutting depth: 123 mm Number of grippers: 10+1 Main saw unit Maximum feed rate: 90 m/min Scoring unit Maximum feed rate: 140 m/min Lift table: 4,500 x 2,200 mm MACHINE DETAILS Programming software: OSI Main saw blade motor power: 18.5 kW Scoring unit motor power: 2.2 kW Total installed power: 41 kW EQUIPMENT Lift table Pre-loading roller table Barcode label printer (Model: ZEBRA ZT230) Rotational station Front support table Flexible gripper for NC positioning Second flexible slider Panel rotational station The machine is sold and delivered in its actual and legal condition (“as is, where is”), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8549 Lhsdpfxozf H N Ho Aiioh

Condition: not inspected (used), Year of construction: 2014, feed rate X-axis: 140 m/min, plate length: 2,200 mm, plate width: 3,800 mm, table length: 3,800 mm, table width: 2,200 mm, TECHNICAL DETAILS Maximum plate width: 3,800 mm Maximum plate length: 2,200 mm Main saw cutting depth: 123 mm Number of grippers: 7 Maximum feed rate: 140 m/min Lhedpfx Aiszf H Nmeieh MACHINE DETAILS Main saw motor power: 18.5 kW Scoring unit motor power: 2.2 kW Total connected power: 31 kW Control system: WINDOWS 10 Machine programming software: OSI Barcode label printer: ZEBRA ZT230 EQUIPMENT Lift table Pre-loading roller table Front support tables Saw carriage Scoring unit Grippers on the sliding stop The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8546

Condition: used, Year of construction: 2019, cutting width (max.): 3,000 mm, saw blade diameter: 300 mm, No minimum price – guaranteed sale to the highest bidder! Lodpfx Aiszf H Hrsiohh TECHNICAL DETAILS Saw unit 1 (tilting) Motor power: 6 kW Saw unit 2 (tilting) Motor power: 0.75 kW Working width max.: 3,000 mm Saw blade diameter: 300 mm MACHINE DETAILS Connection power: 7 kW The machine is sold and delivered in its current and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8572

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,500 mm, table load: 8,000 kg, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,440 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 12,000 m/min, feed rate Z-axis: 12,000 m/min, travel distance W-axis: 500 mm, workpiece weight (max.): 8,000 kg, quill travel distance: 500 mm, quill diameter: 110 mm, overall weight: 25,000 kg, Equipment: rotational speed infinitely variable, FEMCO BMC 110 T2 Drilling Machine (T-design) – available for short-term delivery The FEMCO BMC 110 T2 is a classic drilling machine for heavy-duty and high-precision machining. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians included ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Technical features: Control: HEIDENHAIN TNC 7 control HEIDENHAIN 19" TFT screen HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 20 bar Tool changer: 60-position chain magazine with dual gripper Chip removal: Double-hinge belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Support bearing: Spindle support bearing ø 250 mm Accuracy: Positioning accuracy: ± 0.020 mm Lsdexc Hphepfx Aiiehh Repeatability: ± 0.010 mm Your advantages with JMT: ✔ Official FEMCO distribution partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and prepare a customized offer.

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, table load: 10,000 kg, spindle speed (max.): 6,000 rpm, table length: 1,800 mm, table width: 1,800 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, LAGUN TM 4 T-frame traveling column milling center The LAGUN TM 4 is a highly stable T-frame traveling column milling center for heavy and precision machining. Ideal for single-part production as well as series production with the highest demands on rigidity, accuracy, and reliability. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust design, high dynamics, and decades of experience in the construction of bed-type milling machines. The machines are impressive due to their high reliability, ease of maintenance, and economical operation. Technical equipment: Control system: HEIDENHAIN TNC 7 control HEIDENHAIN 19" TFT screen HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 60-position chain magazine with dual gripper Chip disposal: 2 x hinged belt conveyors (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Lhjdpfoq I Nkbsx Aiieh Positional accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Your advantages with JMT: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and create an individual offer.

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,500 mm, table load: 20,000 kg, spindle speed (max.): 6,000 rpm, table length: 2,195 mm, table width: 2,195 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, LAGUN TL 4 – T-frame Design Machining Center The LAGUN TL 4 is a highly stable, T-frame machining center designed for heavy-duty and precision machining. Ideal for single-part production as well as series production with the highest requirements for rigidity, accuracy, and reliability. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock Ledpfx Aeq I Nlysiishh ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust design, high dynamics, and decades of experience in the construction of bed-type milling machines. The machines impress with their high reliability, ease of maintenance, and economical operation. Technical equipment: Control: HEIDENHAIN TNC 7 control HEIDENHAIN 19" TFT screen HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 60-position drum magazine with dual gripper Chip disposal: Double-hinge belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positional accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Your advantages with JMT: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and prepare an individual offer for you.

Condition: excellent (used), CATALOG NUMBER 7394 TECHNICAL DATA - max main blade diameter: 380mm - max cutting height: 110mm - main blade height adjustable up/down - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on sliding table: 2560mm Ljdey Rr R Nepfx Aiiehh - cutting width at rip fence: 810mm - with side table - main motor: 5.5kW - table dimensions: 1250x730mm - blade guard included - overall dimensions (L/W/H): 2580x2570x1050mm - weight: 780kg ADVANTAGES – German-made – Used saw, very good condition Net price: 7900 PLN Net price: 1880 EUR (based on 4.2 EUR rate) (Prices may change with significant currency fluctuations)

Condition: excellent (used), Catalogue number: 7885 TECHNICAL DATA - Max main blade diameter: 400 mm - Max cutting height: 120 mm - Main blade adjustable up/down and at an angle Lhedpfeyg Iifox Aiijh - Large blade guard - Spindle diameter: 30 mm - Cutting length on sliding table: 1400 mm - Cutting width at guide: 1300 mm - With side sliding table - Guide on side table adjustable at angle - Main saw motor power: 4 kW - 2 speeds: 3000/4500 rpm - Table dimensions: 1120x1020 mm - Table dimensions with extension: 1630x1730 mm - Extraction port diameter: 80 mm, 140 mm - Dimensions (L/W/H): 3300x2180x1450 mm – weight: 1040 kg ADVANTAGES – Polish production – DTR documentation – Used saw - Very good condition Net price: 9900 PLN Net price: 2360 EUR (at rate 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER: 7949 Technical data: - Track width: 380 mm - Shaft width: 420 mm - Max saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max cutting height: 120 mm - Table width with clearance: 1060 mm - Table length: 2050 mm – Top section: - Pawl/anti-kickback row - Metal pressure roller - Kickback fingers - 2 metal feed rollers - Hold-down clamp - Saw shaft - 3 metal pressure feed rollers – Bottom section: - Guide - Kickback fingers - Track - Stepless feed speed adjustment - Feed motor: 1.5 kW - Main motor: 30 kW - Centralized track lubrication - Extraction outlet diameter: 250 mm - Roller tables: 2 pcs 1st table length: 3500/800 mm 2nd table length: 2550/800 mm - Roller width: 700 mm - Table height: 950 mm - Overall dimensions (LxWxH): 2950 x 2000 x 2000 mm - Weight: approx. 3000 kg Advantages: - Made in Germany - 2 roller tables - Used multirip saw - Very good condition Lhjdpfx Aisy Tw S Roieh Net price: 32,900 PLN Net price: 7,833 EUR Net price calculated at the rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)