Used Kieserling for sale (15)

Condition: used, Single-column eccentric press KIESERLING & ALBRECHT, type PEDRU 100 Factory No. 549150, Year of manufacture 1990 Pressing force 100 tons Reach 320 mm Frame opening at the rear 400 mm Table size 830 x 600 mm Ram size 600 x 355 mm T-slot hole Ø 50 mm with clamping piece Table height above floor 880 mm Ram stroke 8 - 129 mm Ram adjustment travel 80 mm Installation height approx. 350 mm (with table insert plate) Stroke rate approx. 55 strokes/min Motor power 11 kW Drive power 400 Volt, 50 Hz - Overload protection in the ram with shear plate - Ram weight compensation cylinder - Automatic centralized lubrication with motor drive - Pneumatic clutch-brake combination Hodpfxsz Alg Ss Agtofl - Pneumatic auxiliary brake DESCH - Table clamping plate 90 mm thick - Electric foot switch and 2-hand operation - Control cabinet fixed to the machine - Press control with SEZ, OTR and ZBS - UVV 11.062 § 9 Para. 3 (Safe for manual feeding operations) - Draw cushion or ejector in the table plate (custom-built) Ø 125 mm, stroke 50 mm - currently not functioning Space requirement L x W x H 2000 x 2000 x 2880 mm Weight of the press 10 tons Good condition

Year of construction: 2017, condition: refurbished (used), Tube pointing machine AVS-25, made by KIESERLING - Initial diameter : 15 - 75 mm - Pointed diameter : 10 - 50 mm - Force : 25 tons - Cycles per minute : 800 Hsdpfxsymacwe Agtofl - Introduction speed adjustable without steps : 0 – 70 mm/s - Model of introduction duo : R25 - Tools : Rotating hammers Model of introduction duo: R25 Tools: Rotating hammers

Year of construction: 2025, condition: refurbished (used), Complete peeling line WDHF35/50/75 Hjdoymb Uuepfx Agtjfl AS NEW, will be supplied revamped & tested in our workshop. Function and h9 tolerance guaranteed. Working range Entry diameter: 7 - 38 mm Finishing diameter: 6 - 35 mm Bar length min.: 2,9 m (3,2 m at max. feeding speed) Bar length max.: 6,5 m Feeding speed: 4 - 50 m/min progressively adjustable Cutting head RPM: 675 / 1330 / 4500 rpm progressively adjustable Scope of supply KIESERLING WDHF 35/50/75 as described above, composed by: - Entry roll conveyor - Feeding rolls - Peeling machine - Exit carriage - New output pinch-roll - Exit channel - Revamping in our workshop - New hydraulic system - New lubrication system - New pneumatic - New electrical equipments - New complete set of tooling & consumables SAAR-HARTMETALL - Optionnal: Laser diameter control system for tool correction Entry diameter: 7 - 38 mm Finishing diameter: 6 - 35 mm Minimum bar length: 2,9 m (3,2 m at max. feeding speed) Maximum bar length: 6,5 m Feeding speed: 4 - 50 m/min progressively adjustable Cutting head RPM: 675 / 1330 / 4500 rpm progressively adjustable

Condition: used, Year of construction: 1990, From the Gütersloh site we offer a well-maintained eccentric press Pressure 100 t Displacement 330 mm Hub 10-130 mm Speed 56 RPM Eccentric adjustment 80 mm Table surface 830x600 mm Piston face 250x130 mm Hfedpfx Ageyglzfotjl Table height 870 mm Taper hole in the piston 50 mm Machine weight approx. 11 t Space requirement approx. WxDxH 2100x1900x3000 mm

Condition: refurbished (used), Tube Straightener VRM60/75, made by KIESERLING Tube diameter : 8 – 60 or 14 - 75 mm Tube length : Depending on accessories (loading table, channels). Minimum 0.5m The ratio diameter/thickness depends on the yield. Strength Example: - 300 N/mm2 = Max. 6.5mm - 400 N/mm2 = Max. 5.7mm - 500 N/mm2 = Max. 5.1mm - 600 N/mm2 = Max. 4.7mm Hfsdpfsvtpghex Agtsl *The first 4 photos are examples of revamping of similar machines that we can offer in case of interest. The following are pictures of the machine in its current state. Tube diameter: 8 – 60 or 14 - 75 mm Tube length: Depending on accessories (loading table, channels). Minimum 0.5m

Condition: used, Bar straightener WRPF 35-50, made by KIESERLING Bar diameter : 8 - 50 mm Speed : Up to 50 m/min Scope of supply includes : - Bar Loading channel - Input pinch-roll - Straightening machine WRPF35 - Exit pinch-roll - Bar Output channel - Electric equipment. (Option: NEW with HMI control desk) - Existing spare parts - Documentation - Optional: Loading table - Optional: Unloading cradle Bar diameter: 8 - 50 mm Speed: Up to 50 m/min Hedpfx Aoymcmregtsfl

Condition: used, Straightener & polishing machine WRPT2, manufactured by KIESERLING Bars diameter : 10 - 35 mm Bars length : 3 - 6 m Scope of delivery includes : 1. Infeed pinch-roll with - Motorised bottom roller - Vulkollan upper roller 2. WRPT2 straightening machines, made KIESERLING with - 2-roller straightener with upper roller height adjustment and upper/lower angle adjustment - Two geared motors with cardan shaft drive - Infeed guide - Side guide support - 1 set of side guides 3. Outfeed pinch-roll with - Motorised bottom roller Hjdpfx Ajymcm Eogtefl - Vulkollan upper roller 4 Electric control panel with manual movement buttons Bars diameter: 10 - 35 mm Bars length: 3 - 6 m

Year of construction: 1990, condition: ready for operation (used), Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible. Hedpfx Ajyiflmjgtsfl

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: M08I/8625, Offer Number: M08I/8625 Machinetype: 4 die - 4 blow transfer header Info: bushing cut-off , PKO Make: KIESERLING Type: K54 Constr. year: 1981/2011 diameter range: 8-22 mm number of dies: 4 Hfodpfx Agoygv Ayjtol number of stations (incl. cut off): 5 cutting length: 175 mm shaft length under head: 155 mm output - pieces/min: 105 press power: 250 to Location: Germany

Year of construction: 1986, condition: used, pressure 100 t throat 330 mm Hfodpfx Ajlp U Stogtol stroke 10-130 mm no. of strokes 56 Hub/min ram - range of adjustment 80 mm table surface area 830x600 mm ram surface 250x130 mm table height 870 mm tool hole in ram 50 mm weight of the machine ca. 11 t dimensions of the machine ca. BxTxH 2100x1900x3000 mm

Year of construction: 1986, condition: like new (used), More information on request Hodpfxjhmfnhe Agtofl

Condition: used, Pressure: 160T Hedpj Dviwofx Agtjfl Length of stroke: 30 - 180 mm Down table size: 800x900 mm Back pressure: WITH BACK PRESSURE Technical characteristics: WITH AIR CLUTCH New electric system

Year of construction: 1983, condition: used, machine/vehicle number: 535350, Lg-Nr. 05466, - Pressing force: 100 t - Stroke: 320 mm - Distance between uprights below the guide: 400 mm - Table size: approx. 850 x 610 mm - Through-hole in the table, offset: 335 / 300 mm - Thickness of the table clamping plate: 90 mm - Overall installation height: approx. 300 mm - Ram surface area: 600 x 335 mm - Height adjustment of the ram: 80 mm - Stroke adjustment: 10 - 130 mm - Ejector stroke in the ram: 32 mm - Stroke rate, continuous operation: approx. 56 /min Hfsdpfj E A Tmox Agtsl - Drive: 380 V / 11 kW - Space requirement: approx. W 1900 x H 2800 x D 2200 mm - Weight: approx. 9000 kg - Includes: - UVV press safety control unit PREVENTA - Hydraulically and pneumatically actuated clutch - LUTEX additional braking system - Central lubrication system

Condition: ready for operation (used), Load capacity: 50 t Hjdpjgzpwgefx Agtefl Distance between the hooks: 5500 mm Hook-in sides for double and single hooks, hook opening: 100 mm Pivoting and rotating middle hook with hanging opening: 200 mm Height between suspension eyes and load hook: Required space: 6000 x 750 x 590 (without hook) mm Weight: 3280 kg

Condition: ready for operation (used), Load capacity: 50 t Distance between the hooks: 5500 mm Hfsdjgzpv Aepfx Agtol Hook-in sides for double and single hooks, hook opening: 100 mm Pivoting and rotating middle hook with hanging opening: 200 mm Height between suspension eyes and load hook: Required space: 6000 x 750 x 590 (without hook) mm Weight: 3280 kg