Used Bar Feeder for sale (16,747)

Condition: used, Bar Feeder, Automatic Bar Feeder, Used Machine Rbjdpfxoxab Ado Ahzjt Manufacturer: IEMCA Model: Master 100 F/R Overall Dimensions: Width: 4900 mm Depth: 1115 mm Height: 1800 mm Weight: 2200 kg Year of Manufacture: 2012 Electrical Data: 400V; 8.4A Bar Diameter Range: 10–100 mm Bar Length: 1100–4200 mm Maximum Bar Weight: 180 kg Maximum Feeding Speed: 500 mm/sec Magazine Types: UP: 500 mm usable length MP: 290–330 mm F: 2.5-ton stacked magazine Changeover Time: 31 seconds Installed Power: 1.5–3 kW Pneumatic System Pressure: 6 bar

Condition: used, Year of construction: 1998, short loader bar diameter 12-72 mm Rbjdpfx Ahevvuu Njzst

Condition: excellent (used), Year of construction: 2007, 1 x oil-flooded single bar feeder LNS Super Hydrobar 6.65 HS-4,4 Year of manufacture: 2007 In very good condition. Previously installed on Traub TNA 300 Rsdpfx Ajvawtpjhzsbt Technical data: Diameter: 32/40/48/55/62/68 mm Bar length: 3,100 mm Accessories: Machine feet Operating manual with circuit diagrams The bar feeder can be inspected at our warehouse in Reichenbach.

Condition: used, Year of construction: 2005, SPACESACER SS2101 rod feeder year 2005 used - efficient Rbsdpjwcgdnsfx Ahzjt

Condition: good (used), Year of construction: 1998, Baujahr 1998 Spindelstunden 52’000h Stangendurchlass 40mm Fanuc Series 18i-T Späneförderer Toolsetter integriert 12Stationen 1Spindel, X und Z Achse Kurzstangenlader Redpfx Ahetth Hgozebt Spannzangenfutter F48

Year of construction: 2004, condition: used, Automatic bar feeder for diameters from 6 to 45 mm and a maximum bar length of 3,300 mm. CE compliant, complete with manuals and certification. Rbodpfx Ahsww Hx Ijzet

Year of construction: 2003, condition: ready for operation (used), A Kupa short bar loader is available. Feed length: 1750mm, max. bar length: 1500mm, bar diameter range: 4mm-85mm, power requirement: 1kW, machine dimensions X/Y/Z: approx. 1900mm/900mm/1600mm, weight: approx. 400kg. On-site inspection is possible. Rodevf Iznjpfx Ahzsbt

Condition: good (used), -KOM 3005- We offer here a used bar feeder for lathes. Rbedpfxsurldcj Ahzjt Technical data Machine dimensions: (w x d x h) approx. 3850 x 700 x 1300 mm Power connection / control voltage: 220 Volt / 50 Hz Machine no.: 90042033 Remarks: The machine is under power in our warehouse and is ready for demonstration

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, bar length: 4,000 mm, bar diameter (max.): 42 mm, 4m feeder and 5 sets of bushings Rbodov Im Ulopfx Ahzjt

Condition: ready for operation (used), functionality: fully functional, bar length: 3,200 mm, bar diameter (max.): 43 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Min. bar changeover time 27 sec. Feed rate 150 mm/sec., adjustable Return speed 950 mm/sec. Supply voltage 230/400 Volt Redpfx Aew Rcfvohzjbt Installed power 3 KW Compressed air 6 bar Weight 900 kg

Condition: ready for operation (used), Year of construction: 2008, bar length: 3,200 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Bar change time 27 sec. Rbodpfx Ajw Rfiwjhzot Feed rate 150 mm/sec. adjustable Return speed 950 mm/sec. Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Weight 900 kg

Year of construction: 1989, condition: excellent (used), the subject of the sale is a feeder and a receiver for the sagem debarker. 100% functional Rbjdpfx Ahelx Nu Uozst

Condition: excellent (used), debarker cross feeder 4 x 5 m longitudinal feeder 13 m x 90 cm chain width 50 cm Rsdpfsv Ikqksx Ahzobt

Condition: excellent (used), Year of construction: 2019, DMG turning center (Y2019) in outstanding condition with only 2800 spindle hours! Including: Subspindle C-axis Y-axis Chip conveyor Iemca Kid 80 bar feeder Optional: set of static and driven tools + jaws Full technical specifications in the attached documents. Cnc control M730UM CNC with CELOS Turret 12 stations Distance between centers 700 mm X-axis travel 260 mm Y-axis travel ca 50 mm Z-axis travel 795 mm Max. turning diameter ø 366 mm Swing over bed ø 920 mm Swing over cross-slide 740 mm Bar work capacity 80 mm Rbjdoya I Ibopfx Ahzet Immediately available for delivery. Please note: WE HAVE A SECOND IDENTICAL NLX 2500/700 SY (2019) AVAILABLE FOR SALE (without barfeeder) AT THE SAME LOCATION AS THIS MACHINE. LET US KNOW IF YOU ARE CONSIDERING BUYING 2 MACHINES. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: new, • KSB / amri BOAX-SF butterfly valve • Diameter: DN200 • Working pressure: PN16 • Seal: EPDM (for water, HVAC, industry, fire protection) • Temperature range: up to 130°C • Material: ductile iron with epoxy coating • Actuation: manual lever with locking positions • Valves unused, stock item, year of manufacture 2021 • Ready for operation, 100% functional • Ideal for water, industrial, hydrant, and fire protection installations. - PRICE LISTED PER VALVE. Rsdpjxyq Icsfx Ahzebt

Condition: good (used), Solenoid valve, directional control valve, valve manifold, control valve Rsdpjfth Sfsfx Ahzobt -Manufacturer: bar, solenoid valve type NM-321-H -Solenoid coil: MA 22 -Price: per piece -Quantity: 2 pieces -Dimensions: 135/72/H22 mm -Weight: 0.3 kg/piece

Condition: excellent (used), Year of construction: 2008, DMG CTX 510 Sinumerik 840D Machine in perfect condition, equipped with bar feeder and C axis Spindle operating hours: 6720 Spindle bore: 95 mm Collet chuck Forkardt D=100 mm max; I also have a brand new Hainbuch SK100 collet chuck for this machine Tool holder VDI 40 Rjdpfx Aer Ak S Njhzebt

Condition: excellent (used), Standard boiler Duisburg 10000kg/h 15,7 Bar +Weishaupt gas burner. Already dismantled ,Ready for collection Rbjdpfx Aonwit Sohzjt

Condition: used, The Wahli-Stream Feeder TM 530 is a reliable feeder designed for efficient paper handling. Manufactured by Wahli, this model is located in Germany, with pricing available upon request. The machine supports an A2 format and is designed to enhance productivity in printing and finishing operations. Rjdpfx Ajvphzpohzebt Format: 360 420 mm Equipment: AUTOMATIC ENVELOPE FEEDER (with vacuum suction) SUITABLE FOR PRESSES WITH STREAM / SINGLE SHEET FEEDERS ADJUSTABLE VACUUM, HEIGHT & SPEEDDELIVERY CONVEYOR MIN ENVELOPE SIZE: 7.6 x 12.7 CM MAX ENVELOPE SIZE: 36 x 42 CM

Condition: ready for operation (used), Stainless steel tub Dimensions: 1900 x 890 x 200 mm Rjdox Hyp Eopfx Ahzobt

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Rjdpfx Aheh Eibajzsbt Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: excellent (used), machine/vehicle number: 41206972, WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Rbodpfxjxuhy So Ahzet Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: excellent (used), machine/vehicle number: 2069056, Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Rsdpfx Ahew Rvu Dozjbt Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder double saw blade cutting height 200 mm, engine power 40 kW, chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material. Rbodpfx Aoh R Tvtshzjt

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand HAAS Main Drive Spindle speed range 3400 rpm Media Chip conveyor Yes Additional Equipment Toolsetter Rjdpsx D S Huofx Ahzsbt VDI40 x 12 Part Catcher / Hainbuch SK80 / KID 80 Barfeeder This HAAS SL-30 was manufactured in 2008 and comes with a KID80 barfeeder. A robust horizontal turning machine featuring a 22 kW, 3400 rpm gearbox, and a 102 mm bore. It includes a Hainbuch SK80, chip conveyor, tool setter, part catcher, and a KID 80 bar feeder. If you are looking to get high-quality turning capabilities, consider the HAAS SL-30 machine we have for sale. Contact us for more information. Application Types Turning