Used Bar Feeder for sale (16,202)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale is a high-quality Renner RS Pro 22 screw compressor, including a refrigerant dryer. The system is of German quality manufacture and is ideally suited for craft businesses, carpentry shops, metal construction, industry, and workshops with higher compressed air requirements. The additional refrigerant dryer ensures dry and clean compressed air, which extends the service life of machines and pneumatic tools. Technical data: Manufacturer: Renner GmbH Model: RS Pro 22 Year of manufacture: 2019 Type: 3440 Motor power: 22 kW Voltage: 400 V Frequency: 50 Hz Phases: 3~ Delivery rate: 3,440 l/min Max. operating pressure: 10 bar Isdszfi Dtepfx Abfeth Made in Germany CE version Equipment: Screw compressor Integrated refrigerant dryer Soundproof enclosure Industrial version Three-phase connection 400 V Maintenance-friendly design High air output Suitable for continuous operation Application areas: Carpentry Joinery Metal construction Automotive workshops Industry Craft businesses Scope of delivery: Renner RS Pro 22 screw compressor Refrigerant dryer Accessories as per scope of delivery Condition: Used - but with few operating hours - see photo Oil change performed New drive belts Functional Signs of wear and tear consistent with age and use Ready for immediate use The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir and valves -Hydraulic pump: Pressure up to 150 bar -Flow rate: 4 l/min -Motor: -Individual components: see photos -Dimensions: 380/220/H450 mm Ijdpfxozfgrhe Abfsth -Weight: 28.7 kg

Condition: good (used), Hydraulic pump, high-pressure pump -Max. pressure: 500 bar Itodpeb A Ibdsfx Abfsh -Hydraulic connections: 7 -Pressure gauge display up to: 600 bar -Pressure: can be switched on/off via foot switch -Pressure: mechanically adjustable -Motor power: 0.15 kW at 1370 rpm

Condition: used, all stainless steel Itedpfx Aszdy Dbobfeh nett width 600 mm 2 motors “JVM GmbH & Co.KG”, Type JV 156-250 power: 2 x 0,95 kW Grill opening: dia. 14-22 mm dimensions : ± 2.700 x 1.400 x 1.000 mm

Condition: used, Year of construction: 2003, operating hours: 5,318 h, 2003 | Terex Pegson 428 Track Feeder Impact | Used Crusher | 5318 hours 📍Location: France Itjdpfoyz Ubfjx Abfsh 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 75000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 81 inspection points 58 approved ✅ 23 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine has not been running continuously for a few years, but it does undertake a few small campaigns each year. It has recently worked and is ready to work. It has been parked in the sun (no shelter) hence the oxidation and cracked hoses. We were not able to see the main and magnetic conveyors in operation during the inspection. Please look at all the photos and videos for more details. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40524 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2026, operating hours: 24 h, functionality: fully functional, total width: 328 mm, total length: 611 mm, total height: 575 mm, type of input current: AC, power of the servo motor: 450 W, power: 0.45 kW (0.61 HP), overall weight: 25 kg, Equipment: CE marking, This product is designed to process entire stacks of sheet productssuch as postcards, greeting cards, tags, packaging bags, andunformed itemsPaper boxes, labels, envelopes, red envelopes,etc;Folded products such as: instruction manuals, promotionalposters, and various folded products of different sizes;This product,such as instruction manuals, card books, notebooks, anime books,magazines, and various other book-like products of different sizes,can be automatically separated and conveyed individually onto aconveyor belt. Itsdpfx Abszca Avjfoh

Condition: used, • With digital display for length adjustment via handwheel. Iodpfx Abewcm Nqofsth • Long support table on the left and right • Storage shelf behind • Extractor • Spare saw blades • Price upon request

Condition: used, Year of construction: 2004, Irco Breuning Bar Loading Magazine 196.6-3 Isdpfxewam Uhe Abfsth Year 2004 6 different channel diameters: 16, 22, 27, 32, 37, 42 Interface configured for Miyano machines

Condition: used, Feeder/conveyor belt 6.6m long x 225mm wide Itedpfoxrtkdox Abfeh

Year of construction: 1994, condition: ready for operation (used), 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U-HD heating surface approx. : 20 qm capacity max. : 1.000 kg/h working pressure : 13 bar increased test pressure : 23,4 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 1994 Iodpfxolx Azyo Abfeth 1 pipe set blind equipped with Weishaupt oil burner, switch cabinet, feed water pump, eco AWT 3, 28 ltr,82 kW, 8,5 m², horizontal and the existing small and large fittings

Year of construction: 1994, condition: excellent (used), 1 used steam boiler ----- manufacturer : Jumey heating surface approx. : 40 qm Itsdpfx Aboikvdiefjh capacity max : 2.000 kg/h max. allow. working pressure : 10 bar so far operated with : 5,0 bar water contents low level approx. : 3.540 l water contents full approx. : 4.750 l year of construction : 1994 equipped with Weishaupt gas burner, fittings for gas supply, switch cabinet, feed water pump and the existing fine and coarse fittings.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, 1 used instantaneous steam generator ----- Manufacturer: CERTUSS Itsdpfxowra S Re Abfsh Type: Junior Performance: 600 kg/h Maximum heat output: 436 kW Operating overpressure: 16 bar Water content: 42.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2006 Equipped with Certuss gas burner, gas control section, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, 1 used steam boiler ----- Manufacturer: LOOS Gunzenhausen Type: U-HD 1250 Heating surface approx.: 20 sqm Max. boiler output: 1,250 kg/h Operating pressure: 13 bar Increased test pressure: 23.4 bar Ijdpfx Abswra Ewofsth Water content at normal level approx.: 993 l Full water content approx.: 1,365 l Year of construction: 2000 Equipped with Weishaupt gas burner type G7/1-D, ZMD, 300-1,750 kW, gas control section, control cabinet, feedwater pump and the available rough and fine fittings.

Year of construction: 2004, condition: excellent (used), 1 used quick steaming units ----- manufacturer : CERTUSS Itodpfx Aji E Hztjbfsh type : Universal capacity : 1.300 kg/h thermal output : 947 kW working pressure : 10 bar test pressure : 57 bar water contents approx. : 155,7 ltr heating surface : 23,7 m² CE mark : CE 0035 year of construction : 2004 yoc heating coil : 2018 / 2021 equipped with Certuss oil burner, oil throughput 40-80 kg/h, switch cabinet built on boiler body, feed water pump and the existing fine and coarse fittings.

Year of construction: 2006, condition: excellent (used), 1 used quick steaming unit ----- manufacturer : CERTUSS type : Universal capacity : 1.800 kg/h thermal output : 1.311 kW Ijdpjikvdqefx Abfsth working pressure : 16 bar test pressure : 57 bar water contents approx. : 218 ltr heating surface : 23,7 m² CE mark : CE 0035 year of construction : 2006 equipped with Certuss gas burner, fittings for gas supply, switch cabinet built on boiler body and the existing fine and coarse fittings. with feed water module, mounted on basic frame, consisting of: switch cabinet, VA feed water tank, Speck feed water pump, dosing tank and mud blow-down tank

Year of construction: 1991, condition: excellent (used), 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U-HD Itjdpji E Hz Tofx Abfoh heating surface approx. : 20 qm capacity max. : 1.000 kg/h working pressure : 10 bar increased test pressure : 18,5 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 1991 equipped with Weishaupt oil burner, switch cabinet, feed water pump, eco AWT 3, 28 ltr,82 kW, 8,5 m², horizontal and the existing small and large fittings.

Year of construction: 2004, condition: excellent (used), 1 used low pressure steam boiler ----- manufacturer : LOOS, Gunzenhausen type : U-ND capacity : 800 kg/h working pressure : 1 bar test pressure : 2 bar water contents full : 1.108 l year of construction : 2004 CE mark : 0036 equipped with Weishaupt gas burner G5/1-D, ZMD-LN, 200-900 kW, 120°C, fittings for gas supply, Itsdpfjnp Hwksx Abfoh switch cabinet with touch panel, and the existing small and large-scale fittings. Dimensions of boiler body (approx.): diameter incl. insulation : 1.230 mm width : 1.450 mm transport height : 2.200 mm length : 1.950mm length including burner : 2.700 mm 1 used feedwater module ----- manufacturer : LOOS, Gunzenhausen type : WSM content approx. : 800 l with switch cabinet, sampling water cooler, 2 dosing vessels

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, operating pressure: 500 bar, total length: 2,050 mm, high-pressure hose length: 10,000 mm, total height: 1,450 mm, total width: 990 mm, pressure: 500 bar, type of input current: AC, empty load weight: 850 kg, fuel: diesel, heating capacity: 157 kW (213.46 HP), overall weight: 850 kg, warranty duration: 12 months, fuel tank capacity: 20 l, power: 18.39 kW (25.00 HP), pressure (max.): 500 bar, water pressure: 500 bar, The HST-XL HotWater was developed as a special-purpose unit specifically for demanding industrial applications and is characterized by its particularly robust and functional design. The simple, yet high-quality technology ensures high reliability and, at the same time, facilitates easy and maintenance-friendly servicing. The equipment includes two stainless steel hose reels with 30 m of high-pressure hose and 25 m of low-pressure hose. In addition, the unit features detachable tanks for BW-20-L canisters and defined lifting points for forklifts and cranes. Includes accessories: - 10 m high-pressure hose DN10, with kink protection on both sides - HP500 Soft CL high-pressure gun with rotating joint at the inlet - CL spray lance with nozzle protection, including high-pressure nozzle Available models: Ijdszd T Rbjpfx Abfoth HSTXL4025HW | 400 bar | 25 l/min HSTXL5020HW | 500 bar | 20 l/min

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 3 h, functionality: fully functional, operating pressure: 500 bar, total length: 1,100 mm, high-pressure hose length: 10,000 mm, total height: 1,130 mm, total width: 700 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 400 kg, input voltage: 400 V, fuel: electricity, overall weight: 400 kg, warranty duration: 12 months, power: 30 kW (40.79 HP), input current: 63 A, water pressure: 500 bar, Equipment: chassis, The CLENA H5031 series offers maximum robustness and durability and is designed for the most demanding industrial environments and construction sites. With a flushing capacity of 30 liters per minute at a water pressure of 500 bar, these machines deliver impressive results, for example, when shot-blasting concrete or cleaning tanks. Ijdpfx Abszd Tx Ssfoth Includes accessories: - 10 m high-pressure hose DN10, with kink protection on both ends - HP500 Soft CL high-pressure gun with a swivel joint at the inlet - CL lance with nozzle protection, including a high-pressure nozzle

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, operating pressure: 500 bar, total length: 860 mm, high-pressure hose length: 10,000 mm, total height: 1,100 mm, total width: 600 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 150 kg, input voltage: 400 V, fuel: electricity, overall weight: 150 kg, warranty duration: 12 months, power: 15 kW (20.39 HP), input current: 63 A, Equipment: chassis, Designed for professional use in industry, the CLENA H series is available in a variety of pressure and flow combinations, up to 500 bar and 21 l/min. This allows for precise adaptation to every customer requirement. These machines are designed for continuous operation in demanding cleaning tasks where no compromises can be made. Includes accessories: - 10 m high-pressure hose DN10, with kink protection on both sides - HP500 Soft CL high-pressure gun with swivel joint at the inlet - CL spray lance with nozzle protection, including high-pressure nozzle Dimensions: 860 x 600 x 1100 Weight: 150 Available models: H9318 | 350 bar | 18 l/min | 11.0 kW H9330 | 200 bar | 30 l/min | 11.0 kW H9335 | 170 bar | 35 l/min | 11.0 kW H9340 | 150 bar | 40 l/min | 11.0 kW H9415 | 500 bar | 15 l/min | 15.0 kW H9418 | 400 bar | 18 l/min | 15.0 kW H9421 | 350 bar | 21 l/min | 15.0 kW H9425 | 300 bar | 25 l/min | 15.0 kW Itjdpfxjzd Tuys Abfoh H9430 | 250 bar | 30 l/min | 15.0 kW H9435 | 225 bar | 35 l/min | 15.0 kW H9440 | 200 bar | 40 l/min | 15.0 kW H9450 | 170 bar | 50 l/min | 15.0 kW H9521 | 500 bar | 21 l/min | 18.5 kW H9560 | 170 bar | 60 l/min | 18.5 kW Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc.

Condition: used, Q 33.0 m³/h P 15,0 kW max. 20 bar max. 110 C° H 90.0 m Nr. 4932869340 232 kg Itsdpfoikwapjx Abfeh

Condition: used, Year of construction: 2015, Technical details: number of spindles: 6 Isdpoxc Idmefx Abfeth spindle passage: 22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. No socket for powered tools! *

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir -Hydraulic pump: Pressure up to 140 bar -Flow rate: 30 l/min -Motor: Lammers 1400 rpm -Hydraulic reservoir: with filter and temperature/level indicator -Individual components: see photos -Dimensions: 910/520/H970 mm -Weight: 225 kg Itjdpfx Aozcuw Isbfoh

Condition: used, An automatic board feeding system has been implemented on an IM Hart deck machine. Isdpfxozd Hwbo Abfjth An electric cabin is also included.

Condition: used, Year of construction: 2001, functionality: fully functional, bar diameter (max.): 32 mm, INDEX MS32P CNC Multi-Spindle Mfd. 2001 SN: 150127 Bar Feed: IEMCA SIR-MS32/33/P (3 Meters) Control: Siemens 840D Integrated Knoll Chip Conveyor External Knoll High-Pressure Filtration Unit 6 Spindles 32mm Capacity 1 Synchron High-Performance 6+1 Configuration Back-Working Capability: Equipped with a Swiveling Synchronous Spindle for simultaneous rear-end machining. Iedoy Ruu Depfx Abfoth Complete Part Processing: Characterized by the ability to perform drilling, tapping, and milling on the cutoff face while the next part is being machined in the main spindles, enabling dropped-complete part production. The "P" Quill Advantage: The "P" model uses hydrostatic quills (Z-axis).