Ball screw with nut

WARNER ELECTRIC Gewindelänge 505 mm

Condition: used, functionality: fully functional, gearing type: mechanical, fuel type: electric, Year of construction: 2019, Height: approx. 4,700 mm Bunker volume: approx. 60 m³ Plate conveyor width / length: approx. 1,150 x 4,800 mm Rcodewk E Emopfx Acdeb Length: approx. 7,400 mm Width: approx. 5,200 mm Bonfigioli gearbox: Type SK 185 Siemens electric motor: 346 to 524 volts, 160 watts

Condition: excellent (used), the plant is consisting of: - 2 chain separators - 2 55 cbm³ silos with discharge screws - 2 discharge screws - 4 mixing and homogenising chambers, - 5 conveyor belts Rodpfxjlxzl Ee Acdocb - 2 double-shaft extruders connected in parallel - 1 double shaft mixers - container for liquid extracts, etc.

Condition: new, Year of construction: 2026, Mini Crawler Crane TB5000 A mini crane on a crawler chassis designed for indoor and outdoor work. Maximum lifting capacity: 2400 kg. * radio control of the device - driving, working, spreading the feet * double power supply of the crane - diesel and electric 230 V * maximum lifting capacity - 2400 kg * anti-overload system as standard * maximum horizontal reach over 11 m * four hydraulic extensions + 1 manual extension Rcedpfxeibqras Acdeb * maximum vertical reach over 13 m * 4 hydraulically lowered supports * weight approx. 2200 kg * height approx. 195 cm * width approx. 88 cm * active arm 16 degrees Additional, optional equipment: * search hook * hydraulic winch 990 kg * Li-ion battery power supply * pads for support feet * hydraulic FLY JIB Available in the selected color.

Condition: good (used), Year of construction: 1998, Max. Pitch circle diameter External gearing 300 mm Max. Pitch circle diameter internal gearing 300 mm Max. Outer diameter of workpiece (equipment) 450 mm max. module 6 gear hobbing width -max. 100 mm Max. Helix angle (with tool Ø 125 mm) +/- 45 ° strokes - infinitely variable 130 - 1300 Hub/min workpiece weight 1000 kg Minimum distance table top - tool spindle -55 / +300 mm Maximum distance table top - tool spindle 200 mm Maximum distance table top - tool spindle 350 mm Manual Upright side shift +/- 25 mm Manual swivelling angle of the tool spindle +/- 0,5 ° Max. Tool speed 15 UpM Max. Workpiece speed 27 UpM Max. Tool diameter 7 Zoll voltage 400 V Rodpfxevu E Nuj Acdscb frequency 50 Hz Max. Line power 70 A total power requirement 48 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,27 x 3,11 x 2,87 m taper in main spindle SK 45 table hole 40 mm control Siemens Sinumerik 840 C Gleason PFAUTER gear shaping machine Mod. PSA 300 The CNC modular gear shaping machine with skiving cutter for the machining of external and internal cylindrical gears, with straight or helical involute with straight or helical involute toothing, as well as any other profile splitting process. The work cycle is controlled by a CNC unit, with specific software for machining the gears, machining. Field of application --> The PSA 300 has been designed for the production of: - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Condition: used, Year of construction: 2016, x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm Control iTNC 530 HSCI Heidenhain Rcjdpfsx Avqbsx Acdsb distance between columns max. 5.090 mm distance spindle center to table 1.825 mm type 175149A-0007 turning speed range - main spindle max. 19.800 min/-1 power capacity - main spindel 20 kW tool taper HSK-A63 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° type 178099-0005 turning speed range - main spindle max. 10.020 min/-1 power capacity - main spindel 20 kW tool taper HSK-A100 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° table surface area 6.000 x 3.000 mm max. table load 50,0 t height over floor 100 mm number of T-slots 12 T-slot - width 28H12 mm T-slot - distance 250 mm number of toolpositions 62 (38+24) pos. number of toolpositions HSK A63: 37+1 pos. number of toolpositions HSK A100: 23+1 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 mm max. tool weight HSK A63: - kg max. tool diameter HSK A100: 80 mm max. tool length HSK A100: 450 mm max. tool weight HSK A100: - kg rapid traverse ( X / Y / Z ) 40.000 mm/min rapid traverse B/C: 4.320 °/min feed speeds X/Y/Z: 30.000 mm/min Working speed B/C: 2.160 °/min Accelaration max. 3,2 m/s² x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm b-axis +115° / -115 ° c-axis +/- 200 ° total power requirement 180 kVA dimensions of the machine ca. 12,5 x 15,0 x 7,0 m 5-Axis-High-Speed-Gantry-Big-Machining-Center DROOP & REIN - FOGS 40 60 C - Fork head

Condition: ready for operation (used), Year of construction: 2009, turning diameter over cross slide: 925 mm, turning length: 2,800 mm, turning diameter: 1,200 mm, spindle bore: 132 mm, spindle speed (max.): 2,000 rpm, CNC Siemens 840D 48-tool changer, Capto C8 tools chip conveyor Rsdswzyn Rjpfx Acdecb Forkardt 400MM chuck, 2 hydraulic steady rests SMW Autoblok capacity 2800x1250MM, spindle bore 132MM weight 23,500 kg

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch Rodpfolhwr Rjx Acdecb - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: refurbished (used), Year of construction: 2010, operating hours: 34,616 h, functionality: fully functional, machine/vehicle number: 1244801, overall weight: 13,500 kg, rotor diameter: 500 mm, number of blades: 125, rotor length: 1,800 mm, type of input current: AC, sieve perforation: 30 mm, VECOPLAN Type VAZ 1800F shredder, after complete renovation, ready to work. The machine is fully functional, the following parts have been replaced: cutting system (knife bases, knives, counter knives, rotor surfacing), vibration isolators, sliding strips, sieve, oils in gears, electrical, hydraulic and pneumatic installations. Rcodpfx Acovx Rtasdjb

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, We have a production line for UPVC profiles, they were purchased in 2010, they have only operated for 2 years, and now they are for sale because the company that had them has now closed. They were serviced before being stored. The machines are in Patras, Greece. Any operational check is welcome. (1) Aluminium and UPVC end milling machine OMC Maxima, (new never connect) (2) CNC automatic line UPVC CNC corner cleaning machine with 4 head horizontal welder - RISUS, RKT-8000 (3) UPVC bead saw - RISUS, RK-1080 (4) UPVC 4 Head vertical welder - HAYA, (5) UPVC 4 Head corner cleaning machine semi-automatic - WEGOMA, WPA4 (6) Single Head multiple corners welder machine -RISUS, RYL-1050 (7) UPVC profile Hot air bender /CBM, (8) 4 Machine benches, (9) ACCESSORIES SMALL TOOLS AND DIES (milling cutters for the machines, chisel etc.). There are spare parts available , as well as technical assistance, if needed. The selling price for all these machines together is at least 50,000 Euros plus VAT, if necessary. Rjdpfxswyvh Rs Acdocb They do not sell independently. Collection from Patras, Greece (we have a fork lift truck to help if need)

Year of construction: 1997, condition: good (used), Type: DDA:VP-370:A27097 Trough: approx. 3,000 x 660 mm Screw diameter approx. 370 mm Drive via geared motor Redpfx Aet S Sxgjcdjcb