Used Ball Screw for sale (7,841)

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Kodpfx Afoxgtd Hoienc Drive motor 55 kw

Year of construction: 1997, condition: used, feed pressure 10 bar Ksdeqvcldepfx Afionc liter capacity 1400 m³ / min dimensions 700 x 550 x 1100 mm total power requirement 11 kW weight of the machine ca. 275 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Kaeser compressor ASD 37, in good condition, not used much, made in 2006. Comes with small expansion vessel. Kjdpfjxl Hwdsx Afisnc

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Compressor: Manufacturer Kaeser Model SM 12 Year of manufacture 2016 Power 7.5 kW Operating pressure 8 bar Refrigeration dryer: Manufacturer Kaeser Model ABT 12 Year of manufacture 2016 Refrigerant R-134a Tank: Manufacturer BWB Behälter-Werk Year of manufacture 2016 Max. operating pressure 11 bar Capacity 270 liters After oil and filter inspection (replacement) Technical condition: perfect! Kodpfxswx I Rus Afijnc

Condition: ready for operation (used), K-tron T35 twin screw volumetric powder feeder with K-tron controller and one set of powder augers. Kedpsr Elk Rofx Afionc

Year of construction: 2006, condition: as good as new (ex-display), Fully refurbished Hosokawa Alpine AHM 90 used system by Alpine Originals Unit available for rental as well. The Alpine AHM agitated ball mill is especially suitable for processing both in continuous close circuit and batch mode of good flowable suspensions where high end-product fineness even in nano range are required. The fine grinding takes place in a liquid with the aid of a bed of agitated milling beads. The mill is suitable for different products such as chemicals, minerals, pcc, dental ceramics, foodstuffs, metals, pigments and paints, laboratory, nano particles, abrasives, pharmaceutics for submicron and nano-scale milling. Technical details Stainless steel, non ATEX Scope of supply Wet mill Hosokawa Alpine AHM 90, grinding tools and grinding media A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Kjdpfxoffqi Hj Afisnc Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: repair required (used), Year of construction: 2005, functionality: not functional, 📌 Atlas Copco GA 132-FF screw compressor (year of manufacture: 2005) 🔧 Condition: Damaged (unknown cause of failure) I offer for sale a screw compressor of the renowned brand Atlas Copco, model GA 132-FF, with a built-in dryer. Year of manufacture 2005. ⚙️ Specification: ✔ Power: 132 kW Kjdpfev Hfc Sjx Afisnc ✔ Capacity: about 25 m³/min ✔ Working pressure: up to 14 bar ❌ Technical condition: The compressor is damaged - the exact cause of the failure is unknown. It may require repair or be used for parts.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, ATLAS COPCO GA50VSD screw compressor, machine after service with frequency inverter Technical specifications: Output: 9.18 m3/min; Motor power: 50 kW; Maximum pressure: 13 bar; Year: 2001 Kedpfexlpzxsx Afijnc Operating hours: 18,531h Price: 19,500 net / 23,985 gross Compressor is fully functional, ready for operation, warranty included Service provided. Video link below.

Condition: ready for operation (used), Year of construction: 1962, functionality: fully functional, Used Weingarten P 100 screw press Pressing force: 80t Table: 350 x 400 mm Kodpfjvuqlbsx Afionc Stroke: 80 - 250 mm Stroke rate: 45 min-1 Installation space: 400 mm

Condition: used, Year of construction: 2010, operating hours: 76,256 h, functionality: fully functional, Equipment: type plate available, Frequency-controlled compressor New oil and filters Compair Type: L22SR-7,5A V2 Volume flow: 3.53 m³/min Pressure: max. 10 bar Motor power: 22 kW Year: 12/2010 Operating hours: 76,256 Weight: 355 kg A suitable refrigeration dryer and 2000L compressed air tank can be purchased separately. Ksdpfxswvac Re Afisnc The machine can be demonstrated under power on site. All information provided without guarantee. Errors and interim sale excepted.

Condition: ready for operation (used), Twin screw gravimetric powder feeder with K-tron controller. The listing is only for the gravimetric feeder. It comes with one set of augers. Kedpjr Elkbjfx Afisnc

Year of construction: 2009, condition: refurbished (used), Fully refurbished Hosokawa Alpine AHM 132 used system by Alpine Originals. This used wet agitated ball mill Alpine 132 AHM has been used in recent years as an exhibition machine and demo machine for customer trials. The machine is in excellent condition and is sold with many accessories. Due to its size it´s perfect for lab scale production and R&D tests. Unit available for rental as well. The Alpine AHM agitated ball mill is especially suitable for processing both in continuous close circuit and batch mode of good flowable suspensions where high end-product fineness even in nano range are required. The fine grinding takes place in a liquid with the aid of a bed of agitated milling beads. The mill is suitable for different products such as chemicals, minerals, pcc, dental ceramics, foodstuffs, metals, pigments and paints, laboratory, nano particles, abrasives, pharmaceutics for submicron and nano-scale milling. Technical details: grinding chamber volume: 5 l Drive power: 7.5 kW Construction materials: stainless steel, polyurethane, ceramic wear protection ATEX: internal zone 1, external zone 2/22 Throughput approx. 40 - 200 l/h Knjdpsg Uv Tfsfx Afiec Scope of supply: Hosokawa Alpine wet mill AHM 132, grinding tools and grinding media A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Atlas Copco GA22 SP screw compressor – 22 kW | 7.5 bar | 60 l/s I will sell an industrial screw compressor of the renowned Atlas Copco brand, model GA22 SP, manufactured in 1996. The device is ideal for applications requiring a reliable source of compressed air in various industrial sectors. Technical data: Knedpfx Afov Dukgsijc Model: GA22 SP Motor power: 22 kW Maximum operating pressure: 7.5 bar Flow capacity (FAD): 60 l/s (216 m³/h) Shaft speed: 3000 rpm Power supply voltage: 400 V / 50 Hz Noise level: 74 dB(A) Dimensions (L x W x H): 770 x 850 x 1200 mm Weight: 405 kg Condition and use: The compressor is in good technical condition, regularly serviced and ready to work. It was used in controlled industrial conditions, which ensures its reliability and efficiency.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, ATLAS COPCO GA45VSD screw compressor, machine with inverter, post-service Knsdpfxoxlpxks Afijc

Condition: used, Year of construction: 1968, Hilgeland ME2 VM trimming press for sale. Knjdpfx Afour N Ewjioc

Condition: new, MECHANICAL SCREW PRESS FOR STACKING U-JOINTS PRK-2 Designed for staking u-joints as well as assembly and dissasembly of driveshafts during repair and remanufacturing process Press can be used for the assembly and replacement of cardan joints in the repair and production of cardan shafts, as well as for other processes in which the pressing operation is used. This press is designed for use in a repair shop and does not require any special knowledge for operation and maintenance. Manual feed ensures precision and quality of stacking process. The pressing mechanism is based on a ball screw, which has a high efficiency and a long service life. Technological tooling for replacing stacked u-joints: • Centering housing for the punches. • Set of 8 bits for punching crosses with diameters from 20 to 31 mm for drive shafts. • Set of 4 bits for punching crosses with diameters from 15 to 19 mm for steering shafts. SPECIFICATIONS Working area (L x B x H) 322х312х350 mm Maximum compression force 5500 kg Maximum force on rupture 2000 kg Dimensions (length x width x height) 402х488х1478 mm Ksdpfx Aspbwdljfijnc Weight 160 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: ready for operation (used), 75 HP, works fine, new oil and filter set. Knsdewdz Ecopfx Afijc

Condition: refurbished (used), Year of construction: 2018, Used agitated ball mill Hosokawa Alpine PV 800 Pulvis Scope of supply: Pulvis grinding system including gas distributor, feeding screw, flap valve, classifier mill Pulvis PV 800 with TTD 315 classifier head, mill motor 37kW, classifier motor 45kW, filter, flap valve, blower and switch cabinet. Technical details: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation. Normal steel with wear protection - ceramic (mill only) A HOSOKAWA ALPINE Originals machine Kjdpfxoqmn Ute Afisnc Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Pulvis agitated ball mill combines our ball mill technology and know how directly with our air classification technology in one single machine to obtain ultra fine end products in one single step. This system is in good condition and with not much use. It features a TTD classifier, a significant improvement over our standard ATP air classifier model, allowing to reach even finer product or reduce wear or energy consumption, depending on the application and operative parameters.

Condition: used, Year of construction: 1996, functionality: fully functional, total length: 2,050 mm, total width: 1,020 mm, total height: 2,820 mm, overall weight: 3,050 kg, rotational speed (max.): 1,480 rpm, Offered are two ball mills, model Cobra 751, from manufacturer Bühler. Both machines come together with a pre-mill (model SRK-690) from the same manufacturer. All machines are in used condition but are fully operational. All machines comply with up-to-date safety standards. Knsdjxldumjpfx Afisc An inspection of the machines is possible upon request and by appointment. We are available for any further questions. The stated price is for one pre-mill and one ball mill together, not for all 4 machines!

Condition: excellent (used), ATLAS COPCO GA37FF screw compressor with air dryer, serviced Knjdpfxoxlppco Afioc

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Ksdpfxeur N Dao Afijnc Year of construction 1970 The machine is ready for immediate use!

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Knedpfx Asxlcfkjfiec Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: ready for operation (used), 500l tank+ air dryer+ 7.5kw compressor from 2019. Knjdpfx Afew Rruyoisc

Year of construction: 2015, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Micron B.V. Vrieco Nauta Minimix stand alone lab mixer machine. Knodei Hbgdjpfx Afijc A miniature stand alone plug-and-play processing plant for the small scale processing of small batches of just a few grams, perfect for the laboratory or R&D projects. It allows to test or produce material a reduced scale. The Nauta Minimix is a gentle conical screw mixer, specially developed for R&D work. It offers high quality powder mixtures without the risk of product distortion. Its mixing results offer reliable process information to scale up your process to a production level. The design of the Minimix is based on the Nauta conical screw mixer, the most common mixing technology for high accuracy and gentle mixing of free flowing powders and pastes. Execution: Stainless steel, non wear protected Non Pressure Shock Resistant (NPSR), non Atex Batch operation Scope of supply: Hosokawa Vrieco Nauta Minimix stand alone machine, with one cone with a maximum net capacity based on waterfill of 5 liter, including internal tools and controls

Condition: excellent (used), Year of construction: 2000, ATLAS COPCO GA30FF screw compressor with air dryer, serviced Technical data: Capacity: 3.84 m3/min Motor power: 30 kW Max pressure: 13 bar Knjdpfsxlpnlex Afijc Operating hours: 13,546 h Year: 2000 Price: 14,500 net 17,835 gross Compressor is fully functional. Service support is provided. Video link below.