Used Automatic Mitre Saw for sale (26,747)

Condition: new, capacity 90 degrees: round 255 mm Knsdpfxod Iip Ae Afijc capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering the desired number and length: material cut- Cutting execution and piece counting until the program is fulfilled • MPS control for entering the desired number of feeds • All important machine data is shown on the LED display during the Cutting process displayed (power consumption, cutting time, number of pieces) • The entered data is in RAM memory • The autodiagnostic circuit automatically shows all irregularities as an error message and checks the entire process • Feed unit mounted floating. • Length adjustment via handwheel and vernier with mechanical position indicator. Adjustable for section lengths from 2.5 mm to 420 mm or through Automatic reversing can be repeated 1 - 29 times, remaining piece length 210 mm

Condition: good (used), Year of construction: 2009, Ideal for processing insect protection systems! Kedexgpvrspfx Afisnc For saw blade D 500 mm, cutting length 5,000 mm Double mitre saw with pneumatically outward swiveling heads, designed for cutting aluminum and PVC profiles. The movable right saw unit automatically positions itself to the profile length entered in the control system. In addition to all required safety devices, the scope of delivery includes both vertical and horizontal clamping devices. Swiveling of the heads The units swivel via pneumatic cylinders. Mitre cuts from 90° to 22.5° outward are possible. Intermediate angles can be set manually using a corresponding stop. The cutting area is equipped with protective hoods that open and close automatically. Profile support roller conveyor at the movable unit with clamping device Spray mist system Macro function included A suitable extraction system is also currently available as an option!

Year of construction: 2007, condition: excellent (used), AUTOMATIC BAND SAW BENETA MOD VENUS SECOND HAND Bandsaw Beneta Mod Venus for curved and straight automatic with outfeed table for second hand pieces. Knedpfx Afjhknb Deijc - Vertical axis X 1600 mm - Vertical axis Y 450 mm - Maximum speed X axis 50 mts/min - Maximum speed Y axis 50 mts/min - Total installed electrical power 6,5 KW - Maximum installed pressure 6-7 bar - X axis brushless motor 6 Nm - Y axis brushless motor 2,3 Nm - Digital control - Standard cutting length 0-1500 mm - Standard cutting height 0-120 mm - Diameter of cast iron flywheels 800 mm - Band saw dimensions Min 5330 mm , max 5350 mm, width min 13 max 20 - Motor power 7,5 HP - Machine dimensions 3.900x3500x2500 h weight 4650 kg

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: XZ 10480, rotational speed (max.): 3,500 rpm, Machine in working progress / 400 FCRO 32 mm / Sawing machine for the foam industry, Knedpfx Aew Iwaisfioc Type Panda 400, M80, 1.9 kW, Year of manufacture 2014, Saw blade 400 mm, Total dimensions 1155 x 100 x 140 cm (with roller tables), Dimensions without roller tables: 71 x 100 x 140 cm.

Condition: used, Schüco double mitre saw Knjdpfx Afexgd A Teiec

Condition: good (used), Year of construction: 2005, OMGA opti cut IDC000080 - Manufacturer: OMGA - Year of production: 2005 - including table before and after Knedpfx Ast D Dukefiec - Control cabinet - Working condition

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, Knjdeupw R Aspfx Afijc automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: excellent (used), CATALOG NUMBER 7623 Technical data: - max. blade diameter 300mm - spindle diameter 30mm - 2 blade guards - pneumatic blade extension - sawing units adjustable at 45° - manual spacing of sawing units - min. cutting length at 90° 300mm - max. cutting length at 90° 4600mm - cutting width 90mm Kodewbz Uxopfx Afienc - cutting height at 90 degrees 90mm - pneumatic clamps 2pcs - control buttons - material support 3pcs - main engine 2×1.1kW - diameter of the exhaust port 2x90mm - dimensions L/W/H 5030x1150x1400mm - weight approx. 500kg ADVANTAGES – Italian production – tiltable sawing units - used saw, very good condition Net price: PLN 15,900 Net price: EUR 3,740 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 16700 € 320.64 € Schwenkrahmen 4800x34x1,1 mm 15 - 120 m/min 360 mm 360 mm 510x360 mm rund 360 mm, quadrat 360 rund 250 mm, quadrat 220 rund 280 mm, quadrat 260 860 mm 0.37 kW 3 kW 0.12 kW 2650 mm 1210 mm 1870 mm 1450 kg Hydraulic vice Inverter for contious variable band speed Continuously adjustable saw arm lowering speed Hydromechanical blade tension can be read via pressure gauge Control panel Chip brush Coolant equipment Knsdpfsw Np N Eex Afioc Operating instructions in German or English

Condition: used, Year of construction: 2002, cutting diameter 305 mm cutting speed 35 / 70 m/min cutting width 350 mm 515 / 14500 mm saw band length 3370 x 27 x 0,9 mm total power requirement 1,8 kW weight of the machine ca. 0,85 t dimensions of the machine ca. 1,8 x 1,9 x 1,9 m Automatic band saw - Material feed single up to 515 mm, Kodpew Tdw Sofx Afisnc multiple up to 14,500 mm - Coolant system - Replacement saw blade

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 33700 € 643.67 € Doppelsäulenführung 6300 x 41 x 1,3 mm 15 - 120 m/min 440 mm 440 mm 640 x 440 mm Kedewirzlspfx Afionc rund 440 mm, rechteck 400 rund 250 mm, rechteck 250 rund 390 mm, rechteck 390 860 mm 1.1 kW 4 kW 0.12 kW 3150 mm 1850 mm 2115 mm 2050 kg 3° inclined sawing band blade brush control panel hydraulic vice hydromechanical blade tension inverter linear way height adjustment pressure adjustment coolant pump saw blade security switch gearbox syncronized movement of sawing arm/clamping jaw hydraulic uplift of sawing frame user manual in GERMAN or ENGLISH ALTERNATIV: Version BMSY 440 CDGH NC with automatic mitre adjustment by NC control

Condition: used, Year of construction: 1991, cutting diameter 320 mm cutting speed 20 - 100 m/min cutting width 320 mm 400 mm saw band length 3660 x 34 x 1,1 mm total power requirement 2,5 kW weight of the machine ca. 0,95 t dimensions of the machine ca. 1,8 x 2,0 x 1,5 m Automatic band saw - Material feed up to 400 mm, multiple feeds possible; max. 10 times Ksdpfxowkvtue Afionc - Coolant system - Piece counter - Material support stand

Condition: new, 310 mm 310 mm 340 x 310 mm saw band length 3730 x 34 x 1,1 mm table height 922 mm band speed 15 - 100 m/min total power requirement 3,0 kW weight of the machine ca. 1,65 t dimensions 1950x1755 m 2-column automatic band saw X-Smart 3 • Modern CNC control, freely programmable for multiple sawing jobs various cutting lengths and quantities • Inclination of the saw frame for maximum service life of the saw band Knedsvn Uy Aspfx Afioc • 2-column structure linearly guided on both sides • Linear guided button for automatic cutting height detection • Hydraulic clamping pressure reduction (option) for thin-walled pipes and profiles • Hydraulic cutting pressure regulation for maximum cutting performance • Material feed carriage in bridge construction for optimal performance Transport/feed and tension of the saw material • Feed unit via precision ball screw • Double vise before and after the saw band • Electrically driven chip conveyor • Cleaning gun for easy cleaning of the system • Full fairing with easy access for maintenance and cleaning • LED work light • Minimum remaining piece length of 50 mm • Waistband tensioning device (option)

Condition: new, 550 mm 550 mm 550 x 550 mm saw band length 5980 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,8 t dimensions 3,0 x 2,15 x 2,2 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor Kodpfofg E Hwsx Afienc The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm table height mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions m SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Kedpfxjfg E Hyj Afienc Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: new, cutting diameter 280 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 330 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,24 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Attention: special price!!! •Fully automatic hydraulic band saw •Miter cuts up to 60° left possible •Saw band length: 3650x27x0.9 •Single stroke: 600 mm (programmable up to 10m) Ksdpfx Asfg E H Dofienc •Simple touchscreen operation. •Saw arm made of nodular cast iron - robust and stable •Required space 3.4 m² •Footprint 1900mm wide x 1800mm deep

Condition: used, Year of construction: 1993, cutting diameter 260 mm cutting width 400 mm capacity 90 degrees: flat 400 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm band speed 17 - 110 m/min engine output 3,5 kW dimensions of saw-band 3830 x 25 x 0,9 mm Knsdpfx Afov T Nrkjiec weight of the machine ca. 1,3 t dimensions of the machine ca. 2,1 x 2,0 x 1,6 m High-performance fully automatic band saw with - coolant system - documentation

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. Kedpfefm T Hbsx Afijnc The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm Knedpfx Afjfu Nbboioc total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Condition: new, saw-blade dia. 305 mm Cutting height 105 x 340 mm Cutting height at 45° 60 x 340 mm saw blade turning speeds 5000 U/min Motor output 2,0 kW machine weight ab. 25 kg Dimensions (L/W/H) 700 x 570 x 980 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) Knedeu Immrepfx Afisc 6mm allen key anthers 2x side supports

Condition: used, Year of construction: 1999, cutting diameter 300 mm saw band length 4100 x 34 x 1,1 mm cutting width 300 mm cutting speed 10 - 130 m/min weight of the machine ca. 2,3 t dimensions of the machine ca. 2,5 x 2,0 x 1,75 m Hydraulic band saw machine with Knodpov Ehclsfx Afiec - Material feed 900mm - Emergency stop device

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, Knsdpfxsd Iipze Afiec automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m Knedpfx Afjfgyifjiec 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine Kodpfx Afofg E Hzsienc reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters

Condition: used, cutting diameter 250 mm cutting speed 10 - 70 m/min band speed 10 - 70 m/min Kodewg Sfrepfx Afisnc 400 mm saw band length 3660 x 27 x 0,9 mm total power requirement 3,5 kW weight of the machine ca. 0,95 t dimensions of the machine ca. 2,0 x 1,7 x 1,7 m inkl. Dokumenmtation