Band Saw - Automatic - Horizontal

BERG & SCHMID K-tech DG 1.202

Year of construction: 2021, condition: as good as new (ex-display), Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Hydraulic clapming for fixtures - Latest Machine Generation Basic machine G640 Work area travel range: X = 1.050 mm, Y = 800 mm, Z = 1.050 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Machine cooling system with an air-cooled cooling unit Machine control series FANUC 31i-MODEL B Plus Cycle package for measuring probes (RENISHAW) Control panel to enter tool data at tool loading and unloading position Rotary table with GROB pallet clamping system (B-axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication GROB spindle diagnostics GSD Single disc-type magazine HSK-A 63 with 50 pockets Tool cleaning device Electromechanical tool breakage detection device Twin palette changer Setup station driven by a three-phase servomotor Setup station door, manually-operated, for manual loading/unloading Additional control panel Pallet 630 x 630 mm, T-slots Equipping the pallet with 12 fluid connections Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (23 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Cutting fluid recirculation on the weekend Flush gun at the work area Air gun at the work area Part clamping system in work area, customer-specific Hydraulic power unit for the part clamping system KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Cooling unit for hydraulic proportional valves Part clamping system in setup station of pallet changer, customer-specific KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP7: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP10: Compressed air, seating check system (P2.1) KP11: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) KP12: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) Touch probe Renishaw RMP60 12-month warranty Lhedpfx Aslaugaeg Rjp

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm table height mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg dimensions of the machine ca. m How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Lhsdpfx Agofg E H To Rjp Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: new, 550 mm 550 mm 550 x 550 mm saw band length 5980 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,8 t dimensions 3,0 x 2,15 x 2,2 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and Lodpfsfg E Hwjx Ag Rehp longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: new, 900 mm 900 mm Ledpfxofg E Hpj Ag Rohp 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: ready for operation (used), Year of construction: 2016, Main Drive Number of axis 6 Table Table load 15 kg Additional Equipment Premium control panel with wall bracket and cable holder External gas cleaning device Adjustable electro-pneumatic valve Wire feed equipment This 6-axis CLOOS QRC 350 QIROX welding robot was manufactured in 2016. It features a maximum load capacity of 15 kg, a workstation reach of 3400 mm, and advanced V6 control. Equipped with a 450A Qineo Pulse A welding machine, it ensures precise and efficient welding. The robot includes a touch sensor and an arc sensor for enhanced accuracy during operations. Consider the opportunity to buy this CLOOS QRC 350 QIROX welding robot. Contact us for more information about this machine. Lhjdpfxewk Rrxe Ag Rep Application Types Welding

Condition: excellent (used), Year of construction: 2005, pipe Ø 25 – 60 mm wall thickness 1 - 4 mm coil Ø max. 3.000 mm coil weight max. 10 t finish pipe length 3.600 - 8.500 mm round pipe Ø 26/28/30/32/36/38/40/44/46/48/52/54/56/60 mm speed max. 100 m/min working direction left → right The line consists of: decoiler crop shear welding table edge trimmer with scrap cutter scrap conveyor strip edge preparation entry table forming part internal scraper/outer scraper cooling zone calibrating part testing and length measuring cutting ejector for reject pipes blow-off station oiling station bundle station Lhedpsuc Shujfx Ag Rep banding station bundle extraction electrics

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator Ledpfx Ajfgyicsg Rjhp · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: excellent (used), Year of construction: 1988, wire working range: 0,1 - 1,3 mm cutting length: 5 - 70 mm output: 400/min. Lsdpfxo Syv To Ag Rehp complete with ciller and motorized decoiler

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, total width: 5,100 mm, throat depth: 1,060 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor de contouren van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor de uitlijnen van het werkstuk Lhsdpfsv Sfp Asx Ag Rjp - Maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rollenbaan is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)

Condition: new, Year of construction: 2024, operating hours: 5 h, functionality: fully functional, Full Automatic or Semi-Automatic CNC bending and sawing machines Pipe size from dia. 6.0-150.0mm CNC bending, Shrinking, Sawing machinery, customerzied design available New machine stocks for sale Lhjdpfxsvl S Dgs Ag Rop listing price is for 2.5inch pipe type60nc bending