Used Flat-Bed Die Cutter for sale (14,509)

Year of construction: 2019, operating hours: 7,400 h, condition: excellent (used), Pwer Register 2 New SMart Feedeer 2 Elevated 400 mm. Format max. 76x106 cm Format min. 35x40 Max speed 8,000 f/h Minimum 70 g/m2 paper Cardstock max 2,000 g/m2 Corrugated cardboard up to 4 mm. Hours worked 7,300 Bernoulli device Crsdpj Ad I Ulofx Aiiji Available Febr. - March 2027

Year of construction: 1986, condition: ready for operation (used), A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible. Cjdpfx Aexgudboiijri

Year of construction: 2004, condition: ready for operation (used), A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Codoyxq Ucepfx Aiiori

Condition: used, Punching force: 630kN, operating voltage: 380V, rated current: 25A, an on-site inspection is possible. Credpj Adt Htjfx Aiiei

Year of construction: 1995, condition: like new (used), * Automatic flatbed die cutter Credpskyt U Tjfx Aiiji * Very good condition. Cldsvexqcy * Possible to see in production. * Max size 1100x1600

Condition: good (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and separating waste sheets - as is - System equipped with a high-performance sheet feeder for automatic NON-STOP operation ⦁ For fully automatic punching, scoring, and embossing with or without gripper edges ⦁ For removing the inner waste as well as the side and rear sheet edges ⦁ For stacking the punched and removed sheets with the attached gripper edges, or ⦁ For separating the gripper edges and subsequently stacking the remaining sheets ⦁ With a patented gripper carriage register system for maximum registration accuracy ⦁ With a package stacking machine that enables fully automatic feeder operation and NON-STOP stacking, and does not need to be reconfigured even for the smallest cut sizes. (Rotary table with comb structure) ⦁ Separator magazine with electric stock control, can be refilled during production ⦁ With centerline equipment ⦁ With automatic pallet changing device in the stacker Specification Sheet format max. 760 x 1060 mm Sheet format min. 350 x 400 mm Maximum punching force 3.3 MN (330t) Speed 9,000 sheets/h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet curvature 4 %) Machine configuration Feeder • Fully automatic non-stop feeder with logistics for processing Euro pallets, system pallets and disposable pallets • Preset function for W4 feeder • Automatic format adjustment of the suction head • Automatic stack side limitation in the feeder System • Dyset Pro bar system • Lateral sheet alignment based on registration marks or sheet edge, max. ±10 mm • Optical side mark Punching station • Vacuum punching plate for the use of 1 mm punching plates • Pneumatic closing frame with quick-release function • Motorized punching plate fine adjustment via touchscreen, adjustment range ±1.5 mm • Motorized punching pressure adjustment Waste removal • Quick-release frame for fixed tools • Sheet guiding device • Integrated quick-release system with fine adjustment for accommodating waste removal frames with fixed tools Stacker Credpfxjz H Smwj Aiiei • Quick-release frame for fixed tools • Brake brush stacker • Integrated quick-release system with fine adjustment for accommodating separating frames with fixed tools

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Crsdpfx Aioww E Nreisi Quick-lock frames at all tooling stations

Condition: used, Year of construction: 2013, KONGSBERG CUTTERS HAVE SUPERB BUILD QUALITY, COMPREHENSIVE TOOLING, CUTTING ACCURACY AND GREAT SOFTWARE REFURBISHED 2013 KONGSBERG XP24 CUTTER Excellent condition 3200 x 1680mm work area 1Kwatt Router for milling (refurbished new spindle) Heavy duty tool / large & small crease wheels V Notch tool, high force knife, oscillating knife Crodpfxez S Hx He Aiiei I cut software / PC New conveyor belt recently fitted 3 Phase extractor, 6kwatt Busch vac pump & silencer

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes Crodpfxjwh Tq So Aiiji • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Condition: excellent (used), Year of construction: 2006, Ref: 11165 . 2006 Young Shin Revotec 106 SR Automatic flatbed die cutter engineered for precision die cutting and stripping Only 12 Million Sheets Run! Features: Bobst die compatibility Integrated lead-edge removal 20% heavier frame than comparable models offers exceptional stability and accuracy The 25% higher impression tonnage expands substrate flexibility Non-stop delivery apron supports continuous production Specification: Maximum Sheet Size 1060 x 760 mm Minimum Sheet Size 400 x 340 mm Maximum Cutting Size 1060 x 745 mm Inside Chase 1140 x 784 mm Minimum Gripper Margin 8 mm Maximum Speed 7500 sph Codpfx Aj Affa Ujiisri Maximum Cutting Pressure 300 Tons Sheet Thickness Manila: 0.1 – 1.5 mm Corrugated Board: E, B Flute (Max. 4 mm)

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, electronic double sheet detection, registration mark BS + AS, machine height adjustment 300 mm, 1 die-cutting frame, 2 stripping frames and 1 set of stripping pins, quick centering device for sheet stack, manual non-stop system at the feeder, manual non-stop system at the delivery, price includes loading onto a truck (no container loading or sea freight packaging included!) In May 2026, a PLATEN CONDITIONING was performed by BOBST on the machine; all deposits were removed from the upper and lower platen, and the cylinder was polished. The sector was opened and assessed as being in "as new" condition. Photos, video, or invoice available upon request! Crodpezmyfdefx Aiiji Attention: The platform must be adapted by the buyer! Longitudinal handrail is missing! Technical main data: Maximum sheet format: 720 × 1020 mm, Minimum sheet format: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Processable materials: Paper / solid board: from 80 g/m² to 2000 g/m², corrugated board: up to 4.0 mm thick Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Equipment features of the series II: C.U.B.E. system: Electronic Bobst machine control system Centerline system: Micrometric adjustment for fast setup times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Ultrasonic double sheet detection Attention: In addition to the machine, the following can be purchased separately for an extra charge: - Foundation/die-cutting frame turning table (third-party manufacturer) (see photo) - Die-cutting frame (see photo) - Honeycomb foundation - Turning table/preparation table, waste stripper (see photo) - Extra stripping frames and stripping tools (see photo)

Year of construction: 2003, operating hours: 50,000 h, condition: excellent (used), functionality: fully functional, Item for sale: Bobst Sprintera 106-PER. Fully documented! Copies of invoices for service and overhauls are all available! Completely overhauled power register! Linear drives new Inverters new Complete pallet transport/machine logistics system new Csdpfx Aijzp Hcujiori Bobst Sprintera 106-PER Year of manufacture: 2003 Max. format: 760 x 1060 mm Min. format: 400 x 350 mm Max. speed: 12,000 sheets/hour Max. cutting force: 250 t Paper: min. 80 g/m² Cardboard: max. 2000 g/m² Non-stop feeder Non-stop delivery Quick-locking system Pricing according to customer requirements. Please do not hesitate to contact us if you have any further questions.

Condition: used, Letter Press Tiegel - DIE Cutter Heidelberg OHT Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1962 - Serial-No. 137806 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Codpfo Ahzwrjx Aiieri Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 1971, functionality: fully functional, machine/vehicle number: 36536, Black Model Cjdpfx Ajzcc S Hsiieri Standart Machine

Condition: like new (used), Year of construction: 2024, operating hours: 80 h, functionality: fully functional, machine/vehicle number: Seriennr. 3073196, working width: 380 mm, type of input current: AC, input voltage: 220 V, total width: 800 mm, total length: 2,820 mm, total height: 1,070 mm, stack height: 400 mm, Equipment: safety light barrier, The Morgana RDC 3852 is a digital rotary die-cutter for print finishing, enabling die-cutting, kiss-cutting, creasing, and perforating in a single pass—ideal for the digital print market and short runs. It utilizes flexible magnetic dies and features an air suction feeder for materials up to 400 gsm (up to 368x508 mm), an automatic waste stripper, and rapid job changeover, making it highly efficient for producing tailored products such as labels, cards, and tickets. Cjdpfx Aiex Syvcoijri

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm Codpjxdmgvofx Aiijri CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Non Stop Feeder & Delivery Center Line System: for Quick Job Changeover Credpfewr T Aiox Aiiji Working Hours: 1500h

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 7/787, Max. Die-Cut Size : 230 x 230 mm Credszcd Atspfx Aiioi Min. Die-Cut Size : 10 x 10 mm Die-Cutting Pressure (Maximum) : 5700 Kg Max. Stack Height : 170 mm Die-Cutting Strokes max. : 11 p/min Technical data can vary according to job, consumables and possible other factors

Year of construction: 2019, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 350 mm, travel distance Z-axis: 1,310 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828 D, bed width: 350 mm, center height: 270 mm, rotational speed (max.): 1,500 rpm, rotational speed (min.): 20 rpm, spindle bore: 105 mm, machine/vehicle number: T0119010008, TURI SPANTEC RIC-TC 2160 CNC flatbed lathe Cjdpfxj Afuq No Aiiori - Operating voltage: 3 x 400 V - Frequency: 50 Hz - Swing diameter over bed: 540 mm - Swing diameter over cross slide: 310 mm - Distance between centers: 1500 mm - Tailstock diameter: 75 mm - Tailstock travel: 170 mm - MT 5 The machine is equipped with a tailstock, a double Multifix tool holder, a three-jaw chuck, diameter: 250 mm, another three-jaw chuck with a diameter of: 315 mm, various tool holders and clamping jaws, as well as a chip conveyor and chip cart. FCA D-94227 Zwiesel - loaded onto a truck.

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Crodpjz N Sf Tsfx Aiiji Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 100597, pressing force: 1,000 t, overall weight: 33,000 kg, TECHNICAL DETAILS Punching force: 10,000 kN Table area (W x D): 1,100 x 800 mm Stroke: 15 - 55 mm Clearance at max. stroke: 28 - 98 mm Die thickness: up to 3 mm Sheet size (width): max. 1,100 mm Punching speeds Upward: 47.8 mm/s Downward: 93.7 mm/s Punching: 0.28 mm/s Hydraulic unit Type: 250 Dimensions (L x W): 1,310 x 910 mm Oil capacity: 670 l Unit weight: 1,000 kg Oil weight: approx. 550 kg Weight with oil: approx. 1,550 kg Automatic punching table Type: 355 Table plate size (W x D x H): 1,000 x 700 x 10 mm Hardness: 62 HRC Grinding pattern: 7 MACHINE DETAILS Electrical system Operating voltage: 400 V Frequency: 50 Hz Rated machine current: 50 A Supply line fuse: 63 A Control voltage: 230/24 V Crsdpfxszfy Amo Aiisi Rated power: approx. 30 kW Protection class: IP 54 Power consumption: approx. 8 kW Pneumatics Operating pressure: 6 bar Dimensions & Weight Dimensions of the puzzle separator (L x W x H): 3,150 x 1,620 x 2,900 mm Working height: approx. 1,700 mm Total weight: 33,000 kg Weight of the puzzle separator: approx. 1.8 t Noise level: < 70 dB(A)

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter Codpfe Aaw Uasx Aiieri The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Format: 640x890mm The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Condition: used, Die-cutting machine – Swivel frame die-cutting machine – Flatbed die-cutting machine – Toggle press – Eccentric press Die-cutting machine + feeder for use with strip-type die-cutting tools Flatbed die-cutting machine HELMERDING, type PSH 25 Item no. EP 97784, Machine no. 6073, Year of manufacture 1998 Pressing force 25 tons Distance between tie rods 700 mm Table area = installation space 800 x 670 mm Table area = installation frame, width 510 x depth 440 mm, plate thickness 20 mm Punch area 800 x 670 mm Through-hole in the table 490 x 420 mm Punch stroke 45 mm Punch adjustment distance 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min Motor power 15 kW Mains connection 400 volts, 50 Hz - controlled drive for stepless stroke rate adjustment - pneumatic clutch-brake combination - punch equalizing cylinder - automatic central lubrication system VOGEL - massive base plate with 4 vibration damping elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons Good condition Previously, the machine was used for die-cutting cardboard sheets. Crjdpfx Aodzqmzoiiei Ideal for die-cutting non-woven fabrics or similar materials for respiratory masks.

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. After inspection. Suitable for die-cutting. Central lubrication. Format 40×57 cm Cjdpfx Ajz N Sftjiijri Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Year of construction: 2022, condition: like new (used), functionality: fully functional, WOOKIL MEGACUT MC-2500 Die Cutter Crjdpoz Suafofx Aiisi MAX. SHEET SIZE: 1800x2600 mm MAX. CUTTING SIZE: 1700x2500 mm MAX. CUTTING PRESSURE: 550 tons