Used Asphalt Infrared for sale (603)

Condition: used, Year of construction: 2017, Rotary stretch blow molding machine for blowing PET bottles from preforms. Preforms are poured from a container into the feed hopper via a tilting device. From there, the preforms are fed out via an ascending belt with electronically controlled speed and are transported to the blow molding machine in a uniform orientation via a chute and loading star wheel. The shape and size of the preforms are checked and defective preforms are ejected before they are fed to the heating boxes via a mechanical star wheel. In the heating boxes, the preforms are preheated with infrared lamps. They are continuously rotated to ensure symmetrical heat distribution. Fans prevent overheating on the outside. Finally, the preform temperatures are checked using an optical pyrometer. Grippers feed the preforms to the blow wheel and remove them from it. The blow molding unit works with “crocodile molds,” in which expansion along the longitudinal axis is supported by a stretching rod. The preforms are then blown into PET bottles. The stretch-blown bottles are removed from the cavities by grippers and conveyed to the ejector. Additional title: rotational molding machine Capacity: 18000 bo/h Number of cavities: 8 pcs. Number of bottles to be ejected per stop: 202 pcs. Blow pressure: 30 bar Power: 58 kW Voltage: 400 V Frequency: 50 Hz Water: 4 bar Compressed air: 360 Nm3/h at 7 bar Weight: 16700 kg Formats: 0.5 l; 1.0 l; 1.5 l PET bottles Features: Preform feed hopper with tilting device for containers, inclined belt conveyor for preforms, preform inspection, heating boxes, blow wheel; bottle ejector; visualization on screen Dsdpfexyktlox Akcecg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 11,223 h, spindle speed (max.): 20,000 rpm, total height: 800 mm, table width: 650 mm, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 75 MonoBlock was manufactured in 2015. It features an X-axis travel of 750 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a spindle speed of 20,000 rpm and a tool magazine with 60 positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 MonoBlock universal machining centre we have for sale. Contact us for further details. • 5-axis simultaneous machining • Spindle taper: SK 40 • Tool magazine: 60 positions • Internal coolant supply: 40 bar • Spindle Hours: 11,223 h • Machine on hours: 32,851 h • A-axis Range: +/- 120 degree Dcsdpfx Asy Ndg Tokcog • C-axis Range: 360 degree • Table: Integrated CNC rotary table (diameter 650 mm) within an 800 x 650 mm table surface • Clamping: Hydraulic clamping for the swivel rotary table • Probing: HEIDENHAIN touch probe • Chip Management: Chip conveyor • Coolant: Internal Coolant Supply (ICS / IKZ) 40 bar • Coolant Tank: 600-liter capacity with paper band filter • Cleaning: Wash-down gun (spray pistol) • Extraction: Extraction unit (mist collector) • Table type: Integrated swivel rotary table Additional equipment • Infrared measuring probe • Electronic handwheel • Chip conveyor • Internal coolant supply system with paper band filter • 3D Quickset preparation • Coolant ring nozzle • Air blast • Operating Mode 4 (BA4) • Safety glass window • DMG Netservice client • Optional: approx. 80 tools available Technical Specification Through-spindle Coolant Yes Taper Size SK 40

Condition: used, Edge banding machine Brand: Brandt Model: Profiline KDF 670-C Hiflex Single-sided edge banding machine in right-hand design, for hot melt gluing. Quick-change gluing unit for hot melt glue. Processing with PU glue granulate possible in accordance with glue specifications. Leak-proof glue reservoir under the glue roller. Precise glue application to the workpiece with glue roller, no adjustment of workpiece thickness necessary. Glue roller with selectable rotation direction for counter or forward feed. Glue temperature monitoring via electronic thermostat. Automatic reduction of glue temperature during work breaks. Infrared heating for hot melt reactivation. Automatic edge banding magazine for roll material and fixed lengths, including roll plate with a diameter of 800 mm and reinforced cutting shears for thick PVC/ABS, max. 3 x 45 mm. Standard equipment with edge banding and workpiece – distance monitoring with optical display. Stable pressure zone with driven, compressed air-loaded main pressure roller and 3 free-running post-press rollers. Standard equipment with automatic central lubrication for the transport chain. Motor-driven adjustment of overpressure. Control panel at the machine infeed. Technical data Edge strip thickness: 0.4 – 12 mm Cutting tool: max. 3.0 x 45 mm or 0.8 x 65 mm Workpiece thickness: 8 – 60 mm Feed speed: 11 – 16 m/min (see below) Dcsdpfxsynhwfe Akcjg When selecting edge banding thicker than 3 mm, the feed speed is automatically switched to 14 m/min. automatically to 14 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: 400 V, 3-phase, 50 Hz Compressed air connection: 6 bar Connected load approx. 17 kW Machine length: 6,860 mm Full information about the machine can be found on our webpage burbagemaskin.se

Condition: new, power: 75 kW (101.97 HP), Year of construction: 2026, An impact crusher is a machine that uses striking as opposed to pressure to reduce the size of a material. Impact crushers are versatile and widely used in various industries for the crushing of hard, abrasive materials. They operate by applying force on the material to be crushed, breaking it into smaller pieces. Here is a general introduction to impact crushers: The impact crusher is a versatile machine used for various applications in construction, mining, and recycling industries. Below are some of the key applications of an impact crusher: 1. Primary and Secondary Crushing Dcedpfx Asq I N Iqekceg Impact crushers are commonly used in both primary and secondary crushing stages. In primary crushing, they break large rocks into smaller, more manageable sizes, and in secondary crushing, they refine the material further into smaller grades. 2. Production of Aggregates Impact crushers are widely used in the production of aggregates for construction. They are effective at producing a wide range of materials, including: Crushed stone for road construction. Sand for concrete and asphalt production. Gravel for general construction and drainage. 3. Recycling One of the most significant applications of impact crushers is in the recycling industry, especially for processing construction and demolition (C&D) waste, which includes materials like concrete, brick, and asphalt. The crushers help convert waste into usable products such as: Recycled concrete aggregates (RCA). Asphalt. Recycled sand and gravel. 4. Mining Industry Impact crushers are used in the mining industry to process ore materials. These crushers help break down large rocks and ores into smaller pieces, making them easier to process for extraction of valuable minerals like gold, copper, and other metals. 5. Production of Manufactured Sand In the production of manufactured sand for concrete, impact crushers are used to break down larger rocks into fine particles, which are then used as an alternative to natural sand. This is especially useful in areas where natural sand is scarce or environmentally protected. 6. Construction and Road Building Impact crushers are integral in the production of materials for road construction, such as base and sub-base materials. These materials are crucial for the stability and durability of roads, highways, and foundations. 7. Industrial Applications Impact crushers are also used in various other industrial applications, such as: Cement production: Crushing limestone and other materials for cement manufacturing. Glass recycling: Breaking glass waste into smaller pieces for recycling. 8. Demolition and Dismantling Impact crushers are used in demolition projects where buildings or structures need to be demolished and the materials crushed for reuse or disposal. They help reduce the size of debris like concrete, asphalt, and bricks into smaller, manageable pieces.

Condition: new, Year of construction: 2026, HSI Crusher and Impact Crusher: Efficient Solutions for Limestone and Talc Crushing Introduction An HSI crusher (Horizontal Shaft Impact crusher) is a highly efficient crushing machine widely used in mining, quarrying, and aggregate production. As a key component in a limestone crushing plant, it delivers precise shaping and high reduction ratios. Whether used as a limestone crusher or talc crusher, the HSI impact crusher ensures consistent particle size and superior performance across various materials. Features of HSI Impact Crusher High Crushing Efficiency The impact mechanism uses high-speed rotors and blow bars to achieve fine and uniform crushing results. Versatile Applications Suitable for medium-hard to soft materials such as limestone, talc, gypsum, and coal. Adjustable Output Size Dsdpfx Asq Ny Saskcocg Hydraulic or mechanical adjustment systems allow easy control of product size. Durable Components Wear-resistant blow bars and liners extend service life and reduce maintenance costs. Easy Maintenance Quick access doors and modular design simplify inspection and part replacement. Energy Efficiency Optimized rotor design and balanced operation minimize energy consumption. Technical Specifications (Typical Range) Model:1214 Max input size： 300 mm, Capacity: 100-140 t/h Model:1315 Max input size: 350mm Capacity: 150-200 t/h Specifications may vary depending on material hardness and feed size. Applications Limestone Crushing Plant: Primary or secondary crushing of limestone for cement, aggregates, and construction materials. Talc Crusher: Fine crushing of soft minerals like talc and gypsum for powder production. Aggregate Production: Produces cubical-shaped aggregates ideal for asphalt and concrete. Recycling: Effective for crushing concrete, asphalt, and demolition waste. Why Choose a Reliable Impact Crusher Manufacturer Selecting a trusted impact crusher manufacturer ensures high-quality materials, advanced design, and reliable after-sales service. A professional supplier provides customized solutions for specific materials, such as limestone crusher or talc crusher, ensuring optimal performance and long-term durability. Impact Crusher for Sale Modern impact crushers for sale feature advanced automation, energy-saving systems, and improved wear resistance. They are ideal for operators seeking high productivity, low operating costs, and consistent output quality in both stationary and mobile crushing setups. Conclusion An HSI impact crusher is a versatile and efficient solution for crushing limestone, talc, and other medium-soft materials. With robust design, adjustable settings, and high throughput, it plays a vital role in any limestone crushing plant or mineral processing line. Choosing the right impact crusher manufacturer ensures reliable performance, reduced downtime, and long-term value.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 13,677 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis WEMAS VZ 750 CENTURY was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a Heidenhain TNC 426 control unit, an electronic handwheel, and a tool changer. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 750 CENTURY vertical machining centre we have for sale. Contact us for further details. • Machine ON time: 41,712 hours • Measuring system: Linear position measuring system in all three axes • Handwheel: Heidenhain HR 410 electronic handwheel • Tool changer: Included • Machine access: Side doors with windows (left and right) Additional equipment • Tool probe: m&h Inprocess 3D tool sensor (Type m&h TS35.10) • Workpiece probe: m&h Infrared workpiece touch probe (Type 25.00 SK40-02) Dsdpey Ifp Hefx Akcjcg • 4th axis: Walter CDS 22 motorized rotary table/indexing head with original control unit • Rotary table features: 3-jaw chuck, RS232 interface, digital angle input • Additional 4th axis: Walter CDS 22 rotary table/indexing unit Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, HAAS control (LCD screen, intuitive programming) Table size 914 x 356 mm Table load capacity 680 kgs X-axis travel 762 mm Y-axis travel 406 mm Z-axis travel 508 mm Spindle speed 12000 rpm Rapid traverse X/Y/Z = 35,6 m/min Tool magazine 24+1 positions (arm type) Spindle power 22.4 kW Spindle taper SK40 Machine weight approx. 3 630 kg Dimensions (L x W x H): 2 500 x 2 400 x 2 600 mm Accessories, equipment - Electric MPG - Coolant system - Internal coolant supply - Chip auger - RENISHAW infrared tool measuring system with probe - 4th axis preparation - Power failure detection - Machine manuals - Machine mounts Dsdpfxey Ifbco Akcecg The machine is in very good condition and still powered on. It was purchased as a new machine in Hungary. It was used in clean and professional environment.

Year of construction: 1990, operating hours: 15,830 h, condition: used, General information Field of application: Construction Serial number: 1NB00706 Drivetrain Type of fuel: Diesel Make of engine: 3408 Weights Empty weight: 44.000 kg Functional Dimensions of cargo space: 1430 x 394 x 372 cm Dcsdpfx Akey Iag Heceg Condition General condition: good Technical condition: good Visual appearance: good Other information Tyre brand: Michelin Delivery terms: EXW Production country: BR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Year of construction: 1987, operating hours: 20,972 h, condition: used, Drivetrain Type of fuel: Diesel Make of engine: 3408 Weights Empty weight: 44.000 kg Functional Dimensions of cargo space: 1430 x 394 x 372 cm Condition Dedpfx Akey Iagmscocg General condition: good Technical condition: good Visual appearance: good Identification Serial number: 1AB00682 Other information Tyre brand: Michelin Delivery terms: EXW Production country: BR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Year of construction: 1990, operating hours: 15,766 h, condition: used, General information Field of application: Construction Serial number: 1NB00691 Drivetrain Type of fuel: Diesel Make of engine: 3408 Weights Empty weight: 44.000 kg Functional Dimensions of cargo space: 1430 x 394 x 372 cm Condition General condition: good Technical condition: good Visual appearance: good Other information Tyre brand: Michelin Delivery terms: EXW Production country: BR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information Dcedpfey Hz Ezjx Akcog

Condition: good (used), Year of construction: 2010, Ref. -No.: 10646 Manufacturer: DMG Type: DMU 125 FD duoblock Year of construction: 2010 Dsdpfsy Hrn Hjx Akcjcg Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 1250 mm Y-Travel: 1000 mm Z-Travel: 1000 mm NC swivel rotary table: 1250 O Tool Taper: HSK - A100 Numbers Of Tools In Magazin: 40 Spindle Speed: 12000 RPM Main Drive: 44 kW Internal cooling: 40 bar Further information: - Universal milling head with controlled B-axis - Tool changer with horizontal double gripper - Taper cleaning for HSK-A 100 - Safety enclosure - Coolant tank, 600 L - Chip conveyor - Rotating viewing window - 3D path control - Heidenhain TS 649 DMG infrared probe - Siemens 840D electronic handwheel - Flushing gun with pump The machine can be viewed in operation by appointment.

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm Dcsdpfx Aepumdcjkcsg spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: good (used), Production capacity of up to 4000 b/h (depending on the format) For formats between 0,25lts up to 3lts Composed by: • Oven for heating the preforms composed of 6 heating modules with 8 infrared lamps each • Preform transfer Wheel • Two-stage compressed air blowing body, low pressure pre-blowing and subsequent high pressure blowing. • Bottle transfer Wheel • Delivered with pallet turner. DOCUMENTATION AVAILABLE Dsdpfx Akswcggvececg

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: gasoline, Year of construction: 2017, Line marking machine: + Larius + Miro Liner Plus + Year of manufacture: 02/2017 + Yamaha MZ175 petrol engine, 5.5 HP + Miro airless pump + Spray gun + Weight: 60 kg + Machine from municipal ownership Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Dedpfx Aksy Ix Hxscjcg Errors and omissions excepted, subject to prior sale!

Condition: new, functionality: fully functional, power: 13.2 kW (17.95 HP), gearing type: mechanical, fuel type: diesel, color: green, emission class: none, brakes: other, suspension: hydraulics, Year of construction: 2026, Equipment: additional headlights, hydraulics, low noise, onboard computer, traction control, TICAB BPM 500 | Asphalt Crack Sealing Machine – Professional Road Repair & Maintenance Equipment The TICAB BPM 500 Crack Sealing Machine is a heavy duty asphalt crack filler and joint sealing machine designed for professional crack sealing, seam filling, pothole edge repair, and pavement waterproofing on roads, highways, airfields, parking lots, industrial surfaces, and concrete joints. Built for high performance and durability, this road maintenance machine delivers reliable results for contractors and municipalities. Key Features • Large capacity crack sealing machine with 500 L mastic tank for extended work cycles • Indirect diesel burner heating system with automatic temperature control for consistent material performance up to 210 °C Ffe Drox Uqq Not Hazow • Efficient diesel engine and economical operation with rapid heating in under 2 hours • Heated hose system and mixer agitator for uniform temperature and smooth material flow • High pressure pump feeding heated sealing mastic under pressure (up to ~10 L/min) • Compressor and purge system included for crack cleaning and hose maintenance • Self propelled wheel option for improved maneuverability (optional upon request) • Can be mounted on a trailer or frame as required ❗ Applications Dcedex Uql Hjpfx Akcjg • Asphalt crack and seam sealing • Pothole edge repair and joint filling • Road and highway maintenance and resurfacing • Airport pavements, parking lots, driveways, bike paths, and industrial surfaces • Surface sealing before overlay or patching Why Choose TICAB BPM 500 The TICAB BPM 500 stands out as a robust, high performance crack sealing machine that combines large tank capacity, reliable indirect diesel heating, automatic temperature control, and versatile use across road construction and maintenance sectors. Its ability to efficiently handle bitumen elastomeric sealing mastics makes it a top choice for contractors, municipalities, and civil engineering companies seeking durable, long lasting pavement repair solutions. Contact us now for price, delivery options, and full technical details. Enhance your asphalt repair capacity today!

Condition: new, Year of construction: 2025, Manual die cutting and creasing ML-1500 Inner chase size (mm): 1500 x 1040 Automatic oil system Infrared security barrier Max. rule length (m): Dodpoxluagsfx Akcecg

Condition: like new (used), Year of construction: 2010, operating hours: 32,498 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece width (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, overall weight: 5,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 Dodpfx Aeyi Dniskcecg With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Year of construction: 2000, operating hours: 12,470 h, condition: used, Field of application: Construction Empty weight: 65.000 kg Djdpfx Asx R Twwjkcecg Please contact Emal Jaweed for more information

Condition: new, Year of construction: 2025, Guowei 68 - available immediately on stock in Europe Product Description： Cutting knife and paperweight are controlled by hydraulic transmission. Fully hydraulic drive makes the machine more secure and imported hydraulic parts ensure the stability of the system. The machine has the function of a reference setting and keeping, and the effectiveness of the reference and self-diagnostic function; infrared protection and hands button interlock protection device; precise paper pusher guide, high precision of alignment and rear angle. Computer system adopts 10-inch colorful full-touch screen, servo motor driven,. The data resolution is 0.01mm, with self-diagnostic function and operation mode display, 100 program groups, more than 10,000 different cutting positions, dynamic tracking, max paper pushing speed 5-10 m / min, and it has imported hydraulic components; electric components from France, Japan, Korea. Its key parts adopt imported bearing of low maintenance. Model / Specifications 68 Cutting width(cm) 68 Max.cutting height without assistance pressing plate(cm) 8 Max.cutting depth(cm) 68 Min cutting depth without assistance pressing plate(cm) 2 Extended length of working table(cm) 53 Height of working table(cm) 92 Machine width including side working table(cm) 126 Total length of working table(cm) 150 Cutting speed(r/min) 20 Max. Paper pressure(n) 10000 Dsdpfx Aju Rz S Ijkcocg Power of main motor(kw) 2.2 Servo Motor for paper feeding(kw) 0.4 Machine weight(kg) 800 Overall dimension(L × W × H)(cm) 167*137*172

Condition: new, Year of construction: 2025, Available immediately in stock in Europe Infrared safety device Automatic oil pump Djdou Uzb Ujpfx Akcecg High-Quality Performance: The TYMB 1040 machine is designed for commercial use, featuring a gross power of 19kw and a flat bed printer plate type, ensuring efficient and precise printing results. Multi-Functional Capabilities: This machine can be used for various applications, including paper printing, label printing, card printing, and tube printing, catering to diverse user needs. Competitive Price: As a new product with a competitive price, the TYMB 1040 offers an excellent value proposition for businesses looking to upgrade their printing capabilities without breaking the bank. CE Certification and After-Sales Support: The machine is CE certified and comes with engineers available to service machinery overseas, providing users with peace of mind and reliable after-sales support. Durable Construction: With a weight of 5t and dimensions of 2250x2200x2000mm, Show less

Condition: excellent (used), Year of construction: 2008, Arburg OK-C S350-60 / Vertical Injection Moulding Machine with Sliding Table / Very Good Technical Condition Year of manufacture: 2008 Injection Unit: Screw diameter: 18 mm Shot weight: 18 g Injection pressure: 2500 bar Dosage volume: 20 ccm Clamping Unit: Clamping force: 35 t Tie bar distance: 0x0 mm Platen size: 295x395 mm Ejector: hydraulic Clamping unit: hydraulic Control System: SELOGICA - Touchscreen Additional Equipment: Vertical injection moulding machine with sliding table 3 stations on the sliding table Air valve x 4 Hydraulic core pull x 1 Hot runner control Hardened - bimetallic injection unit Parallel movements Infrared safety curtains Dcjdpfsy Dp Rasx Akceg Screw diameter can be changed Dimensions: Weight: 2500 kg Length/Width/Height: 2.55x1.85x3.52 m All machines offered are started and tested by our service technicians prior to sale. It is possible to obtain a video of the selected machine's technical tests or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of construction: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable Air valve x 6 Hydraulic core puller x 2 Control unit with hot runners x 12 Infrared safety curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized Engel service in Germany Dimensions Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW Dcsdpfey Dqlrjx Akcsg Price: On request

Year of construction: 2026, condition: new, functionality: fully functional, Husqvarna FS 400 LV Floor Saw incl. DIA NEW Husqvarna FS 400 LV Floor Saw incl. DIA – NEW | 187 mm cutting depth | 500 mm blade | Honda GX 390 petrol engine Item number: 967 79 65 01 Technical Data: Manufacturer: Husqvarna Model: FS 400 LV Condition: NEW Operating weight: 99 kg Blade diameter: 500 mm Bore: 25.4 mm Max. cutting depth: 187 mm Engine: Honda GX 390 petrol Engine output: 8.7 kW (approx. 11.8 HP) Fuel: Petrol Dcodpfjy In Tzex Akcog Fuel consumption: approx. 4.3 l/h Water tank: integrated Starting system: recoil start Key Features & Equipment: - Robust floor saw for precise cuts in asphalt & concrete - Powerful Honda GX 390 engine – reliable & efficient - Includes cutting blade – ready for immediate use - Large cutting depth range up to 187 mm - Integrated water tank for efficient cooling - Ergonomic design for comfortable operation - Compact construction – ideal for construction sites & renovation work - Made by Husqvarna – proven quality & durability Applications: ✓ Road & civil engineering ✓ Asphalt & concrete cutting ✓ Sewer construction & pipe laying ✓ Renovation & repair works ✓ Contractors, municipalities & landscaping ✓ Joint cutting on small to medium-sized sites Location: Warehouse D-46514 Schermbeck (NRW) – inspection & collection possible Delivery: Germany-wide & international delivery on request Price basis: ex works Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to errors and prior sale. Prices excl. VAT Other sizes & models available! ➡️ Floor saws with various cutting depths & engine options – also electric & diesel powered Buy Husqvarna floor saws | FS 400 LV NEW | Floor saw with Honda engine | Asphalt & concrete cutter | Floor saw with 500 mm blade | Floor saw with 187 mm cutting depth | Husqvarna FS series | Petrol engine floor saw | Professional cutting technology Your reliable partner for cutting & separation technology: Claudio Macagnino Construction Machinery & Commercial Vehicle Trading GmbH ➡️ Enquire now & secure immediately available new equipment! We are happy to offer you a virtual inspection of the machine via video call if required.

Condition: used, functionality: fully functional, fuel type: diesel, color: yellow, overall weight: 2,550 kg, Year of construction: 2023, Bomag BW 100 AD-5 Tandem Roller Bomag BW 100 AD-5 Tandem Roller | Deutz Diesel Engine | STAGE V / Tier 4f | Sliding Operator’s Seat Plus | Edge Cutter | Folding ROPS Bar | CE/EPA Technical Specifications: Manufacturer: Bomag Model: BW 100 AD-5 Year of manufacture: 2023 Operating hours: approx. 80 h Weight: 2,550 kg Engine: Deutz Diesel Engine D 2.2 Engine power: 18.5 kW Emissions standard: STAGE V / Tier 4f Working width: 1,000 mm Starting system: Electric starter Features: Edge cutter, Sliding Operator’s Seat Plus, Folding ROPS bar, road lighting (StVZO-compliant), beacon, CE/EPA Highlights & Features: - Powerful Deutz diesel engine meeting STAGE V / Tier 4f standards - Comfortable Sliding Operator’s Seat Plus – optimal visibility and ergonomics - Edge cutter – for precise asphalt edge finishing - Road lighting and beacon – compliant and safe for public road use - Folding ROPS bar – enhanced safety with reduced transport height - Made by Bomag – professional rolling technology for the highest requirements Applications: ✓ Asphalt and road construction ✓ Fiber optic cable installation ✓ Cable and pipeline construction ✓ Pathway, driveway, and parking lot construction ✓ Municipal projects and civil engineering contractors ✓ Compaction of asphalt and base courses ✓ Construction companies and rental fleets Location: Warehouse, D 46514 Schermbeck (NRW) – Inspection and collection possible Delivery throughout Germany and internationally upon request Pricing ex-warehouse Maassenstraße 91, D 46514 Schermbeck (Wesel District) All information without guarantee. Subject to prior sale and errors. Prices plus VAT / VAT excluded Further rollers and asphalt technology available! Also available: BW 80, BW 90, BW 120, etc. ➡️ New & used machines, accessories & spare parts Purchase Bomag tandem rollers | BW 100 AD-5 | Deutz STAGE V | Asphalt roller with edge cutter | Bomag compaction technology Your reliable partner for compaction technology & construction machines: Claudio Macagnino Construction Machinery & Commercial Vehicle Trading GmbH ➡️ Enquire now and secure immediately available machines! Dcodpfx Akjy In Dascsg Virtual machine viewing via video call available on request.

Condition: used, Year of construction: 2005, The SCREEN PTR 4100, manufactured in 2005, is a dependable computer-to-plate system designed for high-quality plate imaging. With a maximum plate size of 830 x 660 mm, it provides consistent and precise output for professional offset printing environments. This unit is equipped with a Heidelberg Autoloader for efficient plate handling, a Xitron RIP with dongle for accurate workflow and imaging control, and a stacker for streamlined plate management. Currently located in Germany and still in operation at a printshop, the SCREEN PTR 4100 combines robust engineering with automation features, making it a reliable solution for printshops seeking accuracy, productivity, and ease of use in plate production. Format: 830 x 660 mm Max. Size: Plate size: Min 324 x 370 Speed: Speed: approx 10 plates/h Equipment: 4-up Thermal PlateSetter - 16 channel infrared laser diodes Resolution: 2400 dpi Autolader Including Xitron Rip with dongle Punching device Dsdpfxow U Dt Ao Akcjcg Blower Unit 7846 Hours The diodes are in very good condition, as can be seen in the pictures.