Ant buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Fe7fk3z COLUMBUS MCKINNON COMPLETE TIRE SHREDDING OPERATION -- Whole tire in-feed conveyor 36"" wide x 30' long -- CM Primary (2) speed shredder with 250 HP motor with 22 knives installed -- Short shredder out-feed conveyor 24"" wide x 10' long -- Long shredder out-feed conveyor 24"" wide x 30' long -- CM Chipper shredder with 200 HP motor with 18 knives installed -- Short Chipper out-feed conveyor 30"" wide x 10' long -- Long Chipper out-feed conveyo... more
5
500 pallet size 6000 rpm gear box cat 50 Fanuc 16 60 tools Chip Conveyor Duciradfa Coolant Through Spindle Chiller Transformer more
1
Cantú Italia Ekmpocq BLM Bender more
3
On behalf of Our customers, we offer this offer, the owner of this Machine will contact you direct. Bab2kx8xgi For our part is no cost to you. Autom. Stacking plant / stacking for hardwoods ZIMAC manufactured in 2000 Technical data on request more
4
sheet width:3000 mm plate thickness:6 mm distance between columns:3050 mm cutting angle:0,5 - 3,0 ° back stop - adjustable:ca. 1000 mm down holder:18 Stück work height max.:770 mm no. of strokes:9 - 17 Hub/min M0vwn total power requirement:7,5 kW weight of the machine ca.:4,5 t dimensions of the machine ca.:3,7 x 1,9 x 1,7 m more
2
Double Rack Oven 93dnmkzne ***Currently dismantled to remove from small bakery - requires rebuilding*** The price reflects this rebuild cost. This oven is particularly suitable for bakeries with access issues as it is already in a few pieces. Oven is in very good condition. Electric Rotating base - Floor level Yr 2007 400 Volt 65.5 Kw 3 Phase 50 Hz Net weight - 1950kg In good condition. more
1
Elect./Voltage: Fsvrjwwe3 1993 MAZAK MULTIPLEX 610 GANTRY CNC LatheDETAILS: -- Chuck Size 6"" -- Max Diameter Bar Capacity 1.65"" -- Max Swing Over Bed 13.78"" -- Distance Between Spindles 40.55"" -- Spindle Motor 15 / 10 HP AC -- Spindle Speed 35 - 5000 RPM -- Spindle Bore 2.04"" -- Spindle Nose A2-5 -- Tools 12 + 12 -- Milling Motor 3 HP AC -- Milling Speed120 - 3000 RPM -- Rapid Traverse Rates (X & Z)945 IPM -- X-Axis Travel (L & R) 7.87"" -- Z-Axis Travel (L / R) 14.37"" / 1... more
5
Diesel tank system, diesel tank, gas station, fuel tank system br / br / -for diesel, heating oil, br / -Of electric motor pump br / -Zapfsäule with acquisition system br / -Tank content 16,000 liters br / -dimensions mm br / kg -Leergewicht Xd8s3i9af more
6

Lot of Cantilever Arms -

Düsseldorf Germany
6383 km
USED
Offer
Another 19 days
Dimensions (l x w x h) approx.: 2500 x 900 x 3900 mm Weight approx.: 2200 kg Description: Perfect for lots 65, 75, 85, 95. 58 arms length 2000 mm x upright width 200 mm, and 5 racks size 1750 x 850 x 860 mm In Online Auction with approx. 468 further Machine Tools and other Assets! Bavaevxeoq Bidding ends: Tuesday, 06 February 2018 from 9am (local time) Auction start price: EUR 1.200 (plus VAT and 15% buyers premium) Your contact person: Simone Clini more
6
On behalf of our customer, we offer the following facility, we point out that the owner of the plant directly reports to you and thus they have a direct contact for the processing. We do NOT incur any costs for you Pellet production line ca 8 - 10 to / h Manufacturer CPM Year of construction 2009/2010 Is made of: Moving floor system 1. Wet mill Pessa, type MMV - 16/16, drive 355 kW, incl. Conveyor systems 1. Drying mill type CPM, type HM 54 - 48, 315 kW each Silo / filter systems / conveyor sys... more


ant
every day

New machines via email!

Be informed!
5
Belt conveyor drive and deflection unit KLEEMANN Fr9pasre0 more
3
Ba08q22cvkNew in 2012 CNC Heidenhain TNC 530 HSCI Table Surface 5500 x 3000 x 350 mm. Longitudinal Travel (X Axis) 5.000 mm. Ram Cross Travel (Y Axis) 4.750 mm. + 1250 mm. Vertical Travel (Z Axis) 1.250 mm. Distance Between Columns 4.050 mm. Rapid Feed (X Axis) 20.000 mm/min. Rapid Feed ( Y, Z Axis) 50.000 mm/min. Max. Working Feed 15.000 mm/min. Positioning Accuracy 0,010 / 4000 min Repeatability Accuracy 0,005 / 4000 min Spindle Nose Taper DIN 69871 AD50 Ranges 2 Speedis 35 – 6.000 r.p.m. Ma... more
1
Elect./Voltage: Xyx0c02ij 1996 MAZAK SLANT TURN 50N/2000 CNC LatheDETAILS: -- Chuck Size 16"" -- Max Diameter Bar Capacity 3.5"" -- Max Swing Over Bed / Carriage 31.7"" / 22"" -- Max Turning Diameter 26"" -- Distance Between Centers 81"" -- Spindle Speed 4 - 1600 RPM -- Spindle Bore 4"" -- Spindle Nose A2-11 -- Spindle Motor 50 / 40 HP -- Spindle Torque 1988 ft. lbs. -- Tools 15 (10 OD + 15 ID) -- Rapid Traverse Rates (X / Z)472 / 630 IPM -- X-Axis Travel 22.64"" -- Z-Axis Trave... more
4
Output module, Steürkarte, output card, control br / br / br maker PWM / -type DANTAFBPOWER br / type 0100020040 br / -1x Steürkarten available br / prize piece br / -dimensions 125/115 / H40 mm br / -weight 0 , 4 kg of Xzemw9l8q more
6
Dimensions (l x w x h) approx.: 1700 x 700 x 900 mm Weight approx.: 90 kg Description: Table size approx. 1700 x 700 mm , height over ground approx. 990 mm, composed of: belt conveyor with pneumatic gear motor, variable speed through mobile platform, belt tension adjusting system, it allows to perform a paint without scrap with time and cost considerably lower in comparison with the other systems, see photos In Online Auction with approx. 124 further Machine Tools and other Assets! Haqtddj Bid... more
6
Maximum bending length: 1050 mm Maximum sheet thickness: 2,2 mm steel B09zfyko Roll diameter: 75 mm more
4
Belt conveyor drive Flender Ba2de9toy2 more
5
turning diameter:400 mm turning length:1500 mm control:FAGOR 800 T CNC turning diameter over slide:230 mm spindle passage:50,8 mm transmission ratio:3 turning speed range:20 - 3500 U/min tailstock quill diameter:60 mm tailstock quill stroke:150 mm tailstock taper MT:4 spindle drive motor:7,5 kW total power requirement:Anschlusswert 13,0 kW weight of the machine ca.:2,2 t dimensions of the machine ca.:2,9 x 1,3 x 1,8 m Iqgicxz more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. L7ewjyc7 Wood Pellet Manufacturing Plant with a capacity of 4 to 5 TPH and the following major components; -- Rebuilt SPROUT Model 43245 Hammer Mill with 100 HP Motor having a capacity of 4 TPH. -- Pulse Jet Dust Collector with 40 HP Motor, Drive and Electrical Control Panel. -- Bucket Elevator 65'H with plastic Buckets. -- 10' Dia. x 40' High Bin with an Explosion Door Safety System and discharge Screw Unloader. -- Bucket Elevator 25' High Plastic... more
4
Gearbox, helical gearbox drive shaft 20 mm dimensions 200/180/H200 mm Weight 11 kg Qle20nfbb more
5
Harmonic drive FHA-17C-50-H-M1024-SP servo drive, serial number according to the photo, Ø housing: 106 mm, Ø flange: 128 mm, Ø hollow shaft: 18 mm, supplied with gem. used, low wear, 100% functional, photos Mxkvd more
4
Manufacturer: Simmpianti, Year: 1998, Longitudinal through running press: yes, Stages: 1, Work piece width min-max mm: 2700 mm X 3200 mm, Min.-max. workpiece height in mm: 3-80, Press length mm: 3200, Pressing width mm: 2700, Press power kg /cm²: 4-6, Warmwasser beheizt: yes, Feeding: yes, Automatical glue supply: yes, Veneer applicaition table: yes, Through running machine: yes, Destacking: yes, Year :1998 Ypzkko more
6
Operating hour: 2101 : Weight 27600 -First use 2016 -2 deck screen -Screening area 3, 60 m x 1, 25 m -Cable remote control -Sieve box hydr. height-adjustable -hydr. Bunker walls Fo20fnlgo -hydr. folding conveyors -CE -first use 2016 -2 deck screen -screen surface 3, 60m x 1, 25m -cable remote control -screen-frame hydr. height adjustable -hydr. Hopper walls -hydr. retractable sonderanlagen belt -CE -For questions about emissions standards, please contact us... more
5
1 x used weld cleaning system Manufacturer: HSF Type: Tig Max 3000 Year of construction: 2010 Weight: 25 kg Pthm2a with documentary Terms of delivery: free loaded terms of payment: prior to pick-up more
1
Elect./Voltage: 240 V, 60 Cy, 3 Ph. M7otx PALLET HAWG M-60 Pallet Dismantler (Band)Sleekly designed band saw type that is versatile for either a One or Two-Man operation or pallet prep saw. -- Features: Pneumatic table travels 5 1/4″ to allow for easy stringer, block, or deck-board removal with 60"" wide [...] reduction drive, proper torque and speed with proven results in longer blade [...] positive mechanical tension-er ratchet with blade driving and idler tires that are readily ava... more
4
Shearing tool, cutting tool, cutting tool, punch, punch, punching die, punching stamp br / br / -Scherwerkzeug for T-Steel 120 x 70 mm br / square drive 25 mm br / -around 27 mm br / -type 50305 br / -1x Abmesungen 175/140/15 mm br / -1x Abmesungen 175/140/15 mm br / -Weight 5 kg Ypnn9f29c more
3
Laipple/KEB Antriebstechnik gear NMS40HU-631/4-BR i = 10/1 motor M63B4 230/400V 50 Hz 1.57/0.9A 0. 185kW 1360 1/minBremse 4 NM 205V-DC/230V ACWellendurchmesser: 15 mm, distance between holes for mounting: 70x60mmaus machine built out, has until recently flawless works 8svl8df9v more
6
Peacock Rexter A5500 of hydrostatic drive 107 KW Ev973kp Initial registration 02.2008 Engine capacity 3.0 l 51000 KM Heavy-duty PTO 75 KW Additional front control Variopflug Additional lights front with socket for flight lighting Air heater Air driver seat Front lifting SenkenLinks right panning DIN plate size 3 Three hydraulic front etc. more
6
Hours of operation: 5481 Weight: 44000 kg - !! variable grain - mix! without changing the screen -horizontal screening plant -Sieve box 6,100 x 1,900 mm -3 deck -3 groups -Apical => conveyor belt 180 degrees swivel 650 m³ storage volume -incl. div. Printing pads -6 - cylinder Caterpillar engine 3126 B DI-TA (149 kw) with 6348 h -Performance Max 600 to\h -Level 2 9pwaemrxu -Tier 2 -CE - !! viariable grain - mixture! without mesh-change -horizontal screening plant... more
3
Startrite Volant 18 Vertical bandsaw 46cm throat 2qzwvm 49cm x 49cm bed size more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. 9qnf7lezn CANTEK EL-610 24 IN. DOUBLE SURFACE PLANER. -- Max. Working Thickness: 6""; Min. Working Thickness: 1/4""; Min. Working Length: 12"". -- Insert cutterheads with 6 rows of carbide inserts per head; inserts are 30mm x 12mm x 2.5 mm. -- Feed Speed: 20-60 m/min. -- Top Cutterhead with 25 HP motor; Bottom Cutterhead with 20 HP; Feed Drive with 3 HP Motor; Elevation with 1 HP Drive Motor. -- NOTE #1: Machine connected for 230-volt operation... more
3
Shearing tool, cutting tool, cutting tool, punch, punch, punching die, punching stamp br / br / -Scherwerkzeug for square steel 20/30 mm br / -Scherwerkzeug for round steel 25/35 mm br / -1x Abmesungen 135/135 / H30 mm br / -1x Abmesungen 140/140 / H30 mm br / -Weight 7 kg Ypnnvuwlb more
4
Framo mini 01 D/A hub spindle drive, serial number according to the photo, used, normal wear, 100% functional, included with com. photos 8oipewks3 more
5
Bauwjl2efoField of application: Construction more
5
orbital welding system for tubes from DN25 - DN100 with 5 welding-heads DN25, DN40, DN50, DN80, DN100 SPS-control make Siemens (allows custom welding-units) C8qk8980a pneumatic foot switch can be used for steel and stainless steel (without welding-unit) more
2
Manufacturer: Homag kantenfräsgerät, Ersatzteil aus Maschine: Kantenmaschine KF 62, für Maschinenseite links: yes, Motorenanzahl: 2, Motor : Perske, kW-Leistung : 0,55, Volt/Hz : 165, Drehzahlen U/min : 12000, Siko Anzeige : no, Horizontal Rollentastung : yes, Vertikale Rollentastung: yes, pneumatisch ansteuerbar: no, Schwenkbar Horzontal: yes, Cxmsa8n more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Bav2b87hq0 CANTEK MODEL REC-610A DOUBLE STRRAIGHTENING PLANER -- 24"" width x 8"" thickness cap., min. material length 12-1/2"" and min. thickness 3/8""; 20 HP top & 15 HP bottom motor, belt driven helical spiral cutterheads 6,000 RPM; each head features (6) rows of 4-sided carbide inserts. -- Variable feed speed 23 - 52 FPM; feed table is hard chrome plated and precision ground for maximum wear resistance. (2) Sets of 4"" dia. upper pneumatic pressure ... more
5
Triangular notching, notching page knife, die holder, cutting tool, punch, punch, punching die, punching stamp br / br / -Stanzwerkzeug Triangular notching br / -Schneidlängen 92mm br / -Abmesungen 185/172 / H95 mm br / -Weight 9.3 kg Yrqvdm3iu more
6
Indramat 100D-B050A1-AS03 / S01 asynchronous main drive motor, serial number according to the photo, used, properly completely overhauled and tested with 12 months warranty, 100% functional, included with com. FotosACHTUNG: cost for packing and shipping please enquire separately! ATTENTION: Please enquire for charges for packing and transport separately! 2qwukq more
4
Field of application: Construction M8xbp more
6
Model Diamant 60 Special device for working width up to 400 mm DIAMANT VBF HARDCOVER PRODUCTION INSERTING UNIT ROUNDING AND BACKING BACK GLUING HEAD AND TAIL BANDING GK 650 PRESSING UNIT EP 680 DELIVERY CASING IN EK 660 UNIT STACKER BLSD 600D HOT MELT GLUE UNIT Bamge0uxqj more
4
Manufacturer article no.: 2405340 7emhg7try Machining: milling / drilling Cone: SK 50 UPM: 10000 Rotary feedthrough: Yes Lubrication: Grease Internal cooling: Yes more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Bav2cione2 CANTEK GT-635 ARD Top & Bottom Head Surfacer: CANTEK MODEL GRT-635ARD DOUBLE SURFACE PLANER. -- 25"" X 8"" Capacity., min. thickness 3/8""; 11.2"" min. length capacity -- Powered by 25 HP top & 20 HP bottom head motors: belt driven helical spiral cutterheads 6,000 RPM; each head features (6) rows of 4-sided carbide inserts; 30 x 12 x 1.5mm insert knife dimension. -- Variable feed speeds from 23 - 52 FPM powered by a 5 HP motor; tables a... more
5
Grinder, angle grinder, lathe tool grinder, thread drill grinder, cutter grinder-travel 140 x 50 Diamond grinding wheels 110 mm Grinding Wheel 180mm with index head Uzffc more
4
Indramat 2AD 100C-B050A1-AS03 asynchronous main drive motor, serial number according to the photo, used, strong signs of wear, 100% functional, included with com. FotosACHTUNG: Please separately request costs for shipping and handling! ATTENTION: Please enquire for charges for packing and transport separately! M3xw7 more
2
-1 x new jaw for Metrotrak 900 x 600 Givs8tz -1 x new crusher jaw for Metrotrak 900 x 600 -For questions about emissions standards, please contact us / / If you have questions for exhaust regulations please ask US more photos and quotes on / / more pictures and offers at: more
6
Standard machine Conventional dampening system Quick action plate clamps Powder sprayer High pile delivery Dismantled In stock Dvhkxsj more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Vllr08k9 CANTEK - C-12RS Straight Line Rip Saw --Ruggedly constructed with cast iron & ground tables, cast iron pressure housing with (6) guide rollers, and solid welded steel base chassis. --Specifications: -- Saw blade dia. 8"" - 12"", saw arbor dia. 1"", saw arbor speed 4,400 RPM. -- 15 HP Saw arbor motor, 2 HP feed motor, 45 - 120 FPM variable speed range. -- Min. workpiece length 8"", max. cutting thickness 3-3/8"", distance from column to cente... more
5
Shearing tool, cutting tool, cutting tool, punch, punch, punching die, punching stamp br / br / -Scherwerkzeug for square steel 25/40/50 mm br / -Scherwerkzeug for round steel 25/40/55 mm br / type 4412151064 br / -type 4412151063 br / -1x Abmesungen 220/206 / H30 mm br / -1x Abmesungen 215/205 / H30 mm br / -weight 16 kg Ypnnmdqxa more


ant
every day

New machines via email!

Be informed!

to

to

Change search
ANT
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close