Used 2 X Engel Es 600 125 Art 597 for sale (226)

Condition: excellent (used), Hydromotor for screw cylinder Injection unit size ES3550 Hägglunds Drives Type CA50 20 2 0 0 N 004 Hedpfxefnqage Afisfn

Condition: used, Year of construction: 1996, operating hours: 52,000 h, functionality: fully functional, machine/vehicle number: 30391, clamping force: 650 kN, overall weight: 9,000 kg, Machine is ready for transport. Operational and set up for use. Excluding temperature control unit, extraction, conveyor belt, and hopper. Installation height 250 mm. Including robot and safety cage. Hfedpexfi Sqsfx Afien

Condition: excellent (used), Year of construction: 2000, Angel ES 500/125 HL Closing 125 TO Hfjdpsh R T Sljfx Afisn Year 2000 Scrow 45mm Spray weight 318 cm3

Condition: excellent (used), Year of construction: 2000, Angel ES 330H80V/125HL .2F Year 2000 Closing 125 TO Multi-component injection molding machines Control CC100 Cylinder H 35 Cylinder V 18 1x Hydraulic core pull BAP 1x Prop. Hydraulics index plate connection BAP 16x HK zones Hfjdoigrinjpfx Afion 2x magnetic clamping plates for BAP and FAP

Condition: good (used), Year of construction: 1996, Engel ES 330H200V/125 HL- 2F Closing 125 tons Scrow 35 mm Scrow 30 mm Spray weight Hfsdpfx Afjlu Hkijion 158 cm3 98 cm3 Year 1996 Enlarged clamping plate 740x700 Mould height min. 350mm Plus rotary divider

Condition: excellent (used), Year of construction: 2001, Manufacturer: Engel Type: ES 650/125 HL Control: CC100 Year of Construction: 2001 Clamping force: 125 t Type: Horizontal Drive: Hydraulic Clamping unit Clamping force: 1250 kN Opening stroke: 600 mm Ejector force: 61 kN Ejector stroke: 150 mm Max. plate distance: 850 mm Minimum mold height: 250 mm Mold plates (HxV): 740 x 840 mm Max. mold size (HxV): 740 x 700 mm Bar clearance: 470 mm Injection unit (45 mm screw) Screw diameter: 45 mm L/D ratio: 20 Metering volume: 290 cm³ Screw speed: 290 min⁻¹ Plasticizing capacity: 35 g/s Injection flow rate: 180 cm³/s Injection volume: 251 cm³ Hfodovytz Nspfx Afisn Injection speed (specific): 134 cm³/s Injection pressure: 1520 bar Injection pressure (increased): 2040 bar Specific injection pressure: 1230 bar Nozzle stroke: 350 mm Nozzle force: 67 kN Heating capacity: 13.3 kW Number of heating zones: 5 Drive Pump drive power: 22 kW Oil volume - main tank: 310 l Oil volume - additional tank: 110 l

Year of construction: 2005, condition: ready for operation (used), A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible. Hfjdpfxjv Extzs Afien

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor Hodpfx Afeb A Tb Rsiofn -Speed: 28 rpm -Power: 0.05 kW -Construction: B3 -Diameter shaft: Ø 12 mm -Protection class: IP 54 -Dimensions: 210/180/H120 mm -Weight: 4.5 kg

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Hjdpfx Aoukn S Hofiefn Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Hersteller: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Hfjdpfx Afowm Iy Eeion Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 135 mm, displacement volume: 8,870 cm³, injection pressure: 1,640 bar, mold height (min.): 500 mm, ejector force: 180 N, ejector stroke: 300 mm, opening stroke: 1,600 mm, plate width: 1,550 mm, plate height: 1,470 mm, installation height: 1,100 mm, total length: 1,181 mm, total width: 3,200 mm, total height: 2,900 mm, overall weight: 51,000 kg, Equipment: documentation/manual, warehouse no.: 503583 manufacturer: ENGEL type: ES 16050-800 DUO controller: CC 100 year of construction: 2007 operation hours: 91691 h clamping force: 8000 kN distance between tie-bars h x v: 1170 x 1000 mm size of mould plates h x v: 1550 x 1470 mm min. mould height: 500 mm max. mould height: 1100 mm max. open daylight: 2100 mm opening stroke: 1600 mm screw diameter: 135 mm swept volume: 8870 ccm injection pressure: 1640 bar measures of machine l x w x h: 11.81m x 3.2m x 2.9m Hfsdpfxoxf E Nls Afijn total weight: 51000KG technical data robot-system handling type: Linear manufacture: ENGEL controller: ERC 64/1-F year of construction: 2007 handling weight: 25 kg X axis: 1300 mm Y axis: 2200 mm Z axis: 4760 mm

Condition: excellent (used), Year of construction: 1993, Clamping force: 1,300 tons Screw diameter: 160 mm Clamping platens: 2,250 x 1,950 mm Minimum installation height: 700 mm Maximum installation height: 1,400 mm Ejector stroke: 350 mm Hsdpfewmlffox Afiofn Opening stroke: 1,650 mm Weight: 130 tons CC90 control system Operating hours: 14,700

Condition: used, Year of construction: 2001, operating hours: 125,000 h, functionality: fully functional, machine/vehicle number: 44235, clamping force: 400 kN, screw diameter: 80 mm, displacement volume: 1,355 cm³, overall weight: 21,000 kg, Operational, taken out of service. Ready for transport. Excluding temperature control units, moulds, conveyor, hopper, extraction, guarding and robot. Installation height 350 mm. Hodpexfi Thofx Afijfn

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, total height: 2,300 mm, total width: 1,291 mm, total length: 4,083 mm, screw diameter: 2,522 mm, clamping force: 1,300 kN, injection pressure: 2,400 bar, overall weight: 10,600 kg, We once again have some excellent cleanroom machines in our range. Here, we are offering this Engel 2-component cleanroom machine from 2006. The machine comes complete with a GEKU SR 500 ST. Additional accessories include a safety cage and a turntable, all part of the package. The machine has run just 33,107 cycles in automatic mode. The machine comes from a reputable pharmaceutical manufacturer, so both the machine and its handling system were maintained under a very strict maintenance regime and are in first-class condition for their age. Even the paintwork shows hardly any signs of wear. I am happy to provide you with further data and a quotation upon request. Hodpjxd H A Rjfx Afiefn Best regards, Nick Schönfeld Machinery Trading

Condition: excellent (used), Year of construction: 2000, Clamping force: 300 t Screw diameter: 70 mm Shot weight: 935 g Shot volume: 1039 cm3 Screw speed: 298 rpm Injection flow rate: 349 g/sec Injection time: 28 sec Injection rate², injection pressure increased: 1039 cm³ Hfedpfx Afjxbdr Reijn Max. stroke volume¹: 983 cm³ Max. shot weight²: 1441 g Specific injection pressure: 1734 bar Opening stroke: 850 mm Ejector force: 82 kN Ejector stroke: 200 mm Max. daylight: 1700 mm Mould mounting plates: 1050 × 1050 mm Enlarged mounting plate: 1050 × 950 mm Type: Horizontal Drive: Hydraulic \+ Robot ERC 53/3- EA

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 21953, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 405 mm, injection pressure: 1,300 bar, injection weight: 239 g, ejector stroke: 100 mm, installation height: 430 mm, total length: 3,910 mm, total width: 1,380 mm, total height: 2,050 mm, overall weight: 4,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, The machine is in good condition and has been maintained during operation with short maintenance intervals. The machine is connected and fully functional. An inspection with test run is possible. All machine documentation is available. The screw, heating cylinder tube, and RSP were renewed in 2022 by Plasma Kunststofftechnik. Basic data: - No: 21953 - Year of manufacture: 1991 - Weight: 4000 kg - Clamping force: 800 kN - Dimensions: 3910 mm x 1380 mm x 2050 mm (LxWxH) - Control system: CC100 Hfedpexcw T Refx Afijn Technical details: - Operating voltage: 400V 3~ 50Hz - Screw diameter: 45 mm - Screw geometry: 3-zone - Max. dosing stroke: 160 mm - Nozzle thread: M28x1.5 - Max. injection pressure: 1300 bar - Shot weight PS: 239 g - Tie bar spacing, horizontal: 405 mm - Tie bar spacing, vertical: 345 mm - Max. opening stroke: 430 mm - Min. installation height: 150 mm - Max. installation height: 430 mm - Centering diameter: 125 mm - Cooling circuits: 6 - Core pulls: 1 - Max. ejector stroke: 100 mm - Excl.: Piovan dosing unit, conveyor belt

Condition: good (used), Year of construction: 2007, operating hours: 47,791 h, functionality: fully functional, clamping force: 900 kN, warehouse no.: 503504 manufacturer: ENGEL type: VICTORY 330H-80V-90 combi controller: CC200 year of construction: 2007 operation hours: 47791 h The rotary unit is 6-way R3/8 inch for a maximum of 3 media circuits, medium max. 120 degrees C with 2 water circuits and 1 hydraulic circuit: 2W1H. The 2nd vertical injection unit 80V is equipped with a 22 mm plastification. The injection volume is 38 ccm with 1590 bar injection pressure. Hedpfx Afjxfq Utjisfn clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 243 mm max. open daylight: 743 mm opening stroke: 500 mm round table diameter: 700 mm horizontal injection unit screw diameter: 35 mm swept volume: 154 ccm injection pressure: 1600 bar vertical injection unit screw diameter: 22 mm swept volume: 38 ccm injection pressure: 1590 bar equipment included screen text german screen text english core pulling hydraulically 1x machine with rotary index table machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for ejector plates safety Schuko-socket 10A mould heating 8x Injection moulding machine for two components measures of machine l x w x h: 4.5m x 1.45m x 2.7m total weight: 9300KG

Condition: good (used), Year of construction: 1995, operating hours: 44,283 h, functionality: fully functional, screw diameter: 30 mm, displacement volume: 98 cm³, injection weight: 88 g, overall weight: 5,300 kg, Angel 90 tons Hfodpfxjt Dxqte Afion Incl. robot (ASS) Production in clean room.

Condition: good (used), Year of construction: 1992, Closing force 500 KN Hedovygh Nspfx Afisfn Screw diameter 30 mm Weight 3,200 KG

Year of construction: 2003, condition: ready for operation (used), Clamping force: 275t, injection weight: 455g, cylinder diameter: 55mm, max. opening distance: 850mm, weight: 20t, operational hours counter: ca. 63,000h, including documentation, a set of new pumps and Handling GEIGER LR 16 EC, the handling needs overhauling. Hsdpfxsiiv Aqj Afiofn

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, overall weight: 10,600 kg, Hello dear customers, We once again have great cleanroom machines in our program. Here we are offering this Engel 2-component cleanroom machine from 2006. The machine is supplied together with a GEKU SR 500 ST. Additional accessories include a protective cage as well as a turntable. The machine has run just 33107 cycles in automatic mode. The machine comes from a renowned pharmaceutical producer, so the machine and its handling were subject to very strict maintenance management and it is in absolutely excellent condition for its age. Even damage to the paintwork is hardly present. I will gladly send you more data and an offer. Best regards Hedpfx Afjt A Ui Aeijfn Nick Schönfeld Maschinen - Handel . e u

Condition: good (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, ejector force: 83,000 N, ejector stroke: 250 mm, plate length: 980 mm, plate width: 1,050 mm, total length: 7,980 mm, total width: 2,220 mm, total height: 2,570 mm, overall weight: 30,750 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503394 manufacturer: ENGEL type: ES 1800-350 HL controller: CC100 year of construction: 2004 operation hours: 69000 h clamping force: 3500 kN size of mould plates h x v: 1050 x 980 mm min. mould height: 350 mm Hjdoxdwnwepfx Afijfn max. open daylight: 1300 mm opening stroke: 950 mm screw diameter: 70 mm swept volume: 1039 ccm injection pressure: 1441 bar equipment included screen text german machine incl. belt conveyor machine incl. Handling machine incl. safety fencing machine without material hopper Anti vibration mounts measures of machine l x w x h: 7.98m x 2.22m x 2.57m total weight: 30750KG technical data robot-system handling type: Handling manufacture: ENGEL controller: ER-HLI 81 year of construction: 2004

Condition: good (used), Year of construction: 1998, Screw diameter 25 mm Closing force 25 ton Hsdpfx Afevxh Iujiofn Opening stroke 350 mm Weight 2,900 kg

Year of construction: 1998, condition: ready for operation (used), Two injection molding machines are available. 1) Battenfeld BA 2700/1200 BK, year of manufacture: 1998, clamping force: 2700kN, platen dimensions X/Y: 900mm/1020mm, tie bar distance X/Y: 630mm/630mm, opening stroke: 550mm, mold height min./max.: 250mm/620mm, max. platen distance: 1170mm, ejector stroke: 160mm. Screw diameter: 55mm, L/D ratio: 22, injection pressure: 1305bar, stroke volume: 913cm³, injection weight: 830g. Machine dimensions X/Y/Z: approx. 6800mm/1900mm/3400mm, weight: approx. 12000kg, control: Unilog 4000, operating hours: approx. 40759h. The machine exhibits faults when switching over. 2) Engel ES 200/45 HLS, year of construction: 1998, clamping force: 45t, platen dimensions X/Y: 550mm/430mm, min. installation height: 180mm, platen distance: 530mm, opening stroke: 350mm, ejector stroke: 100mm. Screw diameter: 25mm, stroke volume: 99cm³, injection pressure: 1400bar, L/D ratio: 20, screw stroke: 140mm. Machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 3300kg, operating hours: 74165h. The machine has slight leaks in the hydraulics. Documentation available. On-site inspection is possible. Individual sale possible. Hfodpfxsv Sufae Afisn

Condition: excellent (used), Year of construction: 1992, Clamping force 8,000 kN Opening stroke 1,000 mm Clamping platens 1,620 x 1,525 mm Tie bar diameter 180 mm Hfedstucrcepfx Afijn Screw diameter 105 mm Special injection weight 3,740 g Machine weight 65 tons