Used Dare To Smoke for sale (1,420)

Condition: used, Year of construction: 2017, operating hours: 22,300 h, type of input current: three-phase, overall weight: 1,600 kg, total width: 2,100 mm, total length: 1,800 mm, total height: 3,700 mm, filter area: 222 m², suction capacity: 20,000 m³/h, Novus AirTower FT0120018 EC Filter Ventilation Tower - 20,000 m³/h Industrial Hall Filter Ventilation for Welding Shops — suited for various technological processes in production plants, predominantly during metalworking operations. Ultra-low energy consumption thanks to the implementation of innovative fan technology. Utilizes an EC (Electronically Commutated) fan instead of a standard unit, delivering SIGNIFICANT savings by minimizing power usage. The EC fan, equipped with an integrated inverter, allows variable speed control and enables adjustment of energy consumption/performance within the 60%, 80%, and 100% operating ranges. Air is drawn in from above and gently discharged near floor level directly at workstations, avoiding unpleasant drafts. Based on the principle of stratified filter ventilation, the unit does not require ductwork installation. Equipped with self-cleaning cartridge filter elements, using compressed air pulses during operation. Filter cleaning is managed by differential pressure control, preventing compressed air wastage. Stratified ventilation principle: contaminated air is drawn from above, filtered, and then released at floor level as clean, respirable air without creating drafts, at speeds below 1.2 m/s—precisely where operators work. Covers a wide 270-degree area. The AirTower operates according to the stratified ventilation guidelines recommended by trade associations, considered the most effective method of air recirculation. Year of manufacture: 2017 Operating hours: 22,300 Psdjxxhwrepfx Adnerd Specifications: - 4 EC fans, each 3.9 kW - Airflow: 20,000 m³/h - Filter area: 222 m² - 6 cartridge filter elements - High-efficiency final filter - Fire safety package - EC Blue energy package - Hall dust sensor: dust level sensor with LED indicators, transmitting air quality data to the AirTower for automatic power adjustment Energy savings depending on the current dust concentration in the hall. Exceptionally quiet operation Stock no.: 1067

Condition: good (used), functionality: fully functional, The VEMAG Smoke Gen Model: 501/E is a dedicated smoke generation unit manufactured by VEMAG ANLAGENBAU. It is designed for industrial use, providing consistent smoke output for commercial smoking and cooking houses. Psdpfxoxv Srhe Adnsrd Performance & Control Manufacturer Quality: Produced by VEMAG ANLAGENBAU, a highly regarded name in food processing equipment. High Generation Rate: Capable of a Generation Rate of Up to 250m3, making it suitable for large-volume smokehouses. Reliable Power: Operates using an industrial Operating volt of 400 V / 50 Hz, ensuring stable power delivery for continuous operation. Controlled Power Consumption: Has a Total power of 26 A and a Fuse of 35 A. Operational Benefits Industrial Connection: Features a Tube Connect of DN125 for robust and secure integration with the smokehouse ductwork. Durable Construction: Built with stainless steel, ensuring longevity, resistance to the smoking process, and simplified cleaning. Excellent Condition: This unit is ready to be connected and put into service, offering reliable smoke generation performance.

Condition: new, volume capacity 2500 m3/h 0 3000 mm total power requirement 1,1 kW weight of the machine ca. 0,08 t dimensions of the machine ca. 0,58x0,58x0,58 m Podpfxsfrzt Ue Adnjrd

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, total width: 245 mm, total length: 420 mm, total height: 450 mm, input voltage: 230 V, noise level: 59 dB, warranty duration: 12 months, volume flow: 420 m³/h, Equipment: chassis, type plate available, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Predpfx Aext Dq Rodned Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: good (used), type of input current: AC, overall weight: 85 kg, input voltage: 220 V, suction capacity: 1,050 m³/h, input frequency: 50 Hz, Nedermann 641 Mobile welding fume extractor filtration capacity: 1050m3/h articulated extraction arm arm length 220cm Psdpfx Ajvmr D Asdnjrd voltage. 220v 50hz 900watt Airflow in the arm: 750 - 1050 m3 Weight: 73 kg Arm diameter: 160 mm Noise level: 73 dB(A) Filtration efficiency: Main filter>99 % -HEPA filter >99.97 % DOP 0.3 mm Filter area: main filter 35 m2 - HEPA filter 7.5 m2

Condition: ready for operation (used), Specifications: Supply voltage | V | 230 Frequency | Hz | 50 Run Hours: 2690 hours Type of current | Ph | 1. Engine power | kW | 2.4 Air flow volume max. | m³/h | 640 Negative pressure max. | Pa | 15000 Protection class | | IP54 ISO class | | F Extraction performance | % | >99 Width | mm | 365 Depth | mm | 768 Height | mm | 801 Weight | kg | 70 Sound pressure level | dB(A) | 70 Allowed ambient temperature | °C | +5 to +35 (during operations) | | -10 to +40 (during transport and storage) Max. temperature of polluted air at the capture point | °C | +50 Allowed max. humidity | % | 70 Prjdpfxjxvpumj Adnsd Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2017, operating hours: 20,700 h, type of input current: three-phase, overall weight: 1,600 kg, total width: 2,100 mm, total length: 1,800 mm, total height: 3,700 mm, suction capacity: 20,000 m³/h, Novus AirTower FT0120018 EC filter ventilation tower - 20,000 m³/h Industrial hall filter ventilation for welding halls — suitable for numerous technological processes in manufacturing facilities, mainly those involving metalworking. Extremely low energy consumption thanks to innovative fans. Features energy-saving EC fans instead of standard fans, providing SIGNIFICANT savings by minimizing electricity usage. The EC fan with integrated inverter enables precise control of fan speed, energy consumption, and device efficiency. Adjustable operating range: 60%, 80%, or 100%. Air intake from the top with draft-free air discharge at floor level — precisely at workstations. Layered filter ventilation system; no need for pipeline installation. Self-cleaning cartridge filter elements — cleaned automatically by compressed air pulses during operation. Filter cleaning is based on differential pressure, ensuring no compressed air losses. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air with no drafts, at a velocity below 1.2 m/s — directly where employees breathe, covering a broad 270-degree area. The AirTower operates in accordance with the layered ventilation method recommended by professional associations, considered the optimal form of air circulation. Year of manufacture: 2017 Operating hours: 20,700 Specifications: Podpfx Adsxxalnjnsrd - 4 EC fans, each with 3.9 kW power - Airflow rate: 20,000 m³/h - Filter surface area: 222 m² - 6 cartridge filter elements - High-efficiency final filter - Fire protection package - EC Blue Energy Package - Hall dust sensor — LED-indicated, transmits dust concentration data to the AirTower to adjust device output automatically. Enables energy savings based on current dust levels in the hall. Very quiet operation Stock no.: 1066

Condition: refurbished (used), functionality: fully functional, Universal Processing System: FESSMANN systems are typically designed for multiple processes, which may include: Drying,Smoking (Hot or Cold),Cooking (Boiling or Steaming),Reddening / Maturing, Roasting / Baking Smoke Generator: The "RZ" model designation often points to a smoke generator unit, which is an essential component of a larger smokehouse or universal system, providing the smoke for the chamber. However, given the full stainless steel structure, it might be a compact, integrated unit. Technical Data: Predpfx Adsxv Smroned Model: RZ 7 108 Voltage (Main) 380V 3Ph 50Hz (Three-phase) Control Voltage 230V∼ (Alternating current) Motor Power 0.3kWHeating Power 1.1kW Smoking ClassZH1 216 1.1

Condition: excellent (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, exhaust gas temperature (max.): 400 °C, Smoke Extraction Roof Fans from Stock Manufacturer: Nicotra-Gebhardt 2 units RDM 56-4550-4W-16 Airflow: 6,250 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 2.2 kW Voltage: 3-230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €3,019 – 60% discount 1 unit RDM 56-5671-6W-21 Airflow: 12,000 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 9 kW Voltage: 3-230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €4,606 – 60% discount 1 unit RDM 56-3535-4W-10 Airflow: 2,050 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 0.55 kW Voltage: 3-230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €2,213 – 60% discount Prsdpfx Adexuwqgenjd 1 unit RDM 56-2528-2W-11 Airflow: 2,850 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 1.1 kW Voltage: 3x230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €2,023 – 60% discount These as-new fans were initially installed but never operated. As the intended purpose was not achieved, the fans were removed again and are now palletized and ready for collection.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, warranty duration: 12 months, input voltage: 230 V, total length: 420 mm, total height: 450 mm, total width: 245 mm, volume flow: 420 m³/h, Equipment: chassis, low noise, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. Psdpjxrgl Ijfx Adnord - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: used, Year of construction: 2013, Technical details: weight of the machine approx.: 300 kg electrics - voltage/frequency: 400 / 50 bei 3~ V/Hz power consumption: 750 Watt dimensions L x W x H: 1,5 x 0,8 x 2,6 m Mobile compact filter unit with extraction arm. (Welding fume extraction and fume filtration). Range of application: MIG/MAG solid wire; various fume and dust applications. incl. extraction nozzle manufacturer Lincoln, type LFA 4.1 CPL BJ 2013; tube Ø 200mm; suction Ø 280mm; total length=3900mm; the head is equipped with illumination via light switch, manual rotary head for locking flap, on/off switch gas temperature 40°C / 100°F Suction capacity approx. 2000m³ mobile over 4 wheels, front braked Psdpfxsu Nv Afo Adnjrd *

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Very good condition used smoke generator. Very little used. Podpfx Adjxpgpujnerd

Condition: used, Year of construction: 2015, operating hours: 424 h, type of input current: three-phase, overall weight: 1,000 kg, total width: 1,700 mm, total length: 1,650 mm, total height: 2,900 mm, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS Air FTower Filtration Tower, 5000 m³/h Industrial welding hall air filtration – suitable for various technological operations in manufacturing plants, primarily metalworking. Pedpfx Aexg Nx Todnerd Top air intake and draft-free bottom air discharge – delivers purified air directly to the workstations. Layered filtration and ventilation principle; the unit does not require duct installation. Cartridge filter inserts – self-cleaning via compressed air pulses during operation. Filter cleaning is controlled by pressure differential – ensures no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from above, filtered, and released at floor level as breathing-quality air, free of drafts, at a velocity below 1.2 m/s – precisely where employees inhale it, covering a wide 270° range. The tower operates according to the layered ventilation method, recommended by trade associations and considered the optimal air circulation method. Year of manufacture: 2015 Operating hours: 424 h Specifications: — Fan power: 5.5 kW — Capacity: 5000 m³/h — Filtration surface area: 80 m² — Filter cartridges: 4 units — Additional final stage F9-class fine filter increases purification efficiency and further protects the fan in case of main filter damage. — 100-liter dust drawer — Very quiet operation: 75 dB(A) — Filtration efficiency: > 99.6 % The unit is in very good technical condition. Warehouse number: 1049

Condition: good (used), Motor : 1.5 kW Predpfxohc Sypo Adned Quantity : 2 pieces Price/ piece

Condition: ready for operation (used), Local Exhaust Unit, Workplace Extractor, PlymoVent S-1, Used Machine,smoke suction,dust extractor,plymovent Manufacturer: PlymoVent Model: S-1 Overall Dimensions: Width: 1600 mm Prsdpfjxa Hldex Adnod Depth: 660 mm Height: 1510 mm Weight: 103 kg Year of Manufacture: 2001 Max. Airflow: 1400 m³/h

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surcharge (recommended) - Retrofit kit STAVO (dust pre-separation) - for FILTOO with spark protection and collecting tray Prjdexaal Rjpfx Adnjd Note : - The device is only used to extract dry dust / smoke - Read the operating instructions before using for the first time

Condition: used, Year of construction: 1998, Technical details: total power requirement: 3,3 kw volume capacity: k.A. m³/h rated current: 14 - 15 / 8 - 8,5 A filter: Größe ca. B:660xT:1000xH:1060mm mm motor capacity: 3,3 kW weight of the machine approx.: 600 kg dimensions L x W x H: 1,45 x 0,8 x 2,0 m Dry separator with fan is sold as is. Pedpsvdczajfx Adnjrd Built-in sheet steel construction Filter surface VARIO T 1.5 f=50 Hz Filter: 6 filter elements; dust extraction via container Ø 300 x H: 380mm Fan: Intake opening Ø 250 m; connected load 380V Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *

Condition: good (used), Manufacturer: Fume Extractor Filter top: 280 x 280 x 20 mm Pjdpfjduiu Sex Adnjrd Filter center: 270 x 270 x 230 mm Filter bottom: 280 x 280 x 30 mm Filter chamber: 360 x 360 x 270 mm Spigot diameter: 45 mm Performance: Connection: Accessories/equipment: mobile Condition: good weight: 0,1 t dimensions: 400 x 630 x 750 mm

Condition: used, Year of construction: 2014, filter area: 150 m², suction capacity: 15,000 m³/h, The WELDEX FT series of filtration towers has been specially designed for the efficient removal of welding fumes in production facilities. These units are primarily intended for extracting contaminated air during the welding of large or complex metal parts, where conventional fume extraction directly at the source is impractical. Fine particles are captured by M-class filter cartridges, and the filters are automatically cleaned during operation using a pulse jet of compressed air (pulse cleaning). The WELDEX FT filtration tower is positioned at the center of the workspace. Fume-laden ambient air is drawn in at the top of the unit from the surrounding area, filtered, and then returned to the hall draught-free through two side outlets. The three-section dust collection drawer gathers separated contaminants from both the pre-separator chamber and the filter compartment. Welding fume extraction for production halls (workplace ventilation systems) Ideal for all work areas where selective extraction is impractical: - Metal industry - Mechanical engineering - Automotive industry - Vehicle manufacturing - Aircraft construction - Shipbuilding - and many more High-performance welding fume extraction for manufacturing plants No need for ductwork installation Easy to install – ready for immediate use Durable, cleanable filter cartridges = low operating costs Efficient fume extraction using thermal lift from the welding process Compact design = minimal space required Flexible application = can be relocated at any time Brand: ESTA Model: WELDEX FT-150 Specifications: Motor power: 11 kW Capacity: up to 15,000 m3/h Vacuum: 2,000 Pa Filter surface area: 150 m2 Weight: 1,400 kg Podpfxsxg Icko Adnsrd Year of manufacture: 2014 Dimensions: Width: 2.10 m x 1.40 m Height: 3.65 m Stock no.: 1031

Condition: good (used), overall dimensions 1650x2200x2600 mm; power supply 400 V, 50 Hz; power 51.6 kW; 2 frames 900x900x1700 mm; external smoke generator. Pedpfx Ajurv Ncodnjrd

Condition: used, Extraction capacity of the unit: 182 m³/h with 5 m air hose 45 Ø: 159 m³/h Filter surface: 9,6 m² Prsdpfxjb Nv S Ej Adnsd electr. connection: alternating current 220 V weight: 20 kg Space requirement: 850 x 330 x 450 mm

Condition: used, Year of construction: 1990, Technical details: total power requirement: 1,5 kw weight of the machine approx.: 110 kg Psdpfx Adeu Nv Dpsnerd electrics - voltage/frequency: 380 / 50Hz V/Hz dimensions L x W x H: 1,0 x 0,55 x 2,4 m Application: for welding and dust air with filtration Air inlet: pipe connection Ø 150 x 60mm; intake flexible pipe 2-sectioned Exhaust air: flexible hose Ø 150mm to approx. 5 meters Operation via on/off switch *

Year of construction: 1991, condition: ready for operation (used), machine/vehicle number: 004744, extraction capacity: 1200 m³ / h drive: 0.75 kW Prsdpofm Ekxjfx Adned space requirement: 700 x 660 x 1030 mm

Condition: used, Year of construction: 1988, Technical details: Prodpju Nwitsfx Adned intake capacity: 1200 m³/h aspiration hole diameter: 230 mm total power requirement: 1,1 kW weight of the machine ca.: 110 kg dimensions of the machine ca.: 1,2x0,7x2,0 m mobile compact filtering device with suction arm length = 2800mm ( suction diameter 230mm) (tube dia160mm). 3 chamber fitering system application: smoke-and dust, such as welding smoke and skome filtration test run has been proceeded succesfully *

Condition: used, machine/vehicle number: 1980 100 175, Max. volume flow: 220 m³/h Pressure max. 22000 Pa electr. connection: 230 V weight: 16,5 kg Space requirement: 720 x 320 x 410 mm Prjdpfx Adsb Nv S Soned