Used Alzmetall Alzstar 30 S for sale (133)

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm total power requirement 1.45 / 1.90 kW weight 285 kg range L-W-H 500 x 800 x 1840 mm Furnishing: - autom. Feed 0.10 + 0.20 mm / rev - stepless speed adjustment - Short spindle MK 3 - Mushroom pushbutton (latching) for EMERGENCY STOP Prsdoxaakajpfx Adned - Reversing switch for clockwise and counterclockwise rotation - Digital speed display - Feed overload protection - Spindle protection with electrical fuse - 2 m cable with plug 16A - Operating instructions in German including special equipment: - Coolant device "B" pos. 25.

Year of construction: 1978, condition: ready for operation (used), Drilling spindle stroke: 160mm, spindle taper: MK4, spindle speed: 1750rpm, reach: 300mm, feed: 0.3mm/rev, table dimensions X/Y: 620mm/470mm, machine dimensions X/Y/Z: approx. 620mm/950mm/1900mm, weight: approx. 450kg. Includes coolant system and threading device. An on-site inspection is possible. Pjdpfjxc Ni Dox Adnerd

Condition: good (used), Year of construction: 1972, Drilling capacity in steel 70 mm Drilling capacity in cast iron 80 mm Spindle holder MK 5 Spindle projection 400 mm Spindle stroke 240 mm Prjdst Uzk Ropfx Adnod Column diameter 250 mm Speed range, infinitely variable 45 - 1325 rpm 5 feeds 0.1, 0.14, 0.2, 0.28, 0.4 mm/rev Table size 880 x 660 mm Motor power 3 kW Dimensions L x W x H 880 x 1200 x 2500 mm Machine weight 1400 kg Accessories / Special features: - Infinitely variable speed adjustment via PIV gearbox and reduction gear - Large clamping table 880 x 660 mm - Feed via cross lever - Large drilling depth adjustment with 240 mm fixed stop - Swivel table - Emergency stop switch - Coolant system Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), bore capacity in steel (diameter) 45 mm throat 300 mm bore stroke 160 mm taper MK 4 table surface area 600 x 500 mm Prjdpfxjvn U Umo Adnjd table adjustable 550 mm total power requirement 0,8 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 0,8 x 0,6 x 1,8 m

Condition: new, Year of construction: 2024, == Exhibition machine == ALZMETALL column drilling machine ALZSTAR 40 SV with coolant unit B (option 25) (consisting of separate tank (33l), pump with motor protection switch, complete fitting) and LED machine light Standard equipment: Mushroom pushbutton, reversing switch (for clockwise and anticlockwise rotation), motor protection switch Infinitely variable speed adjustment, digital speed display, feed overload protection, protection class IP54, connection plug Spindle protection with electrical fuse Technical data: Drilling capacity steel E335 (St 60) 40 mm Thread cutting: Steel E335 (St 60) M 24 Cast iron EN-GJL-200 (GG20) M 30 Short spindle MK 3 Spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Spindle-to-table distance min./max. 117/701 mm Feed rate 0.10 + 0.20 mm/rev Machine height without options approx. 1840 mm Podpfjd Hy Elsx Adnord Net weight approx. 285 kg Drive stepless Motor 1500 / 3000 rpm Power 1.45 / 1.9 kW Spindle speed 160-2250 rpm

Condition: used, Year of construction: 1979, Drilling capacity: 35 mm Mounting type: MK 4 Feed rate: 0.04, 0.07, 0.10 ,0.14, 0.26, 0.40 Speeds: 63, 125, 180, 250, 355, 500, 710, 1400 Digital display in Z: 720 mm Cross table:x= 460 y= 280 mm drilling capacity in GG 20: 45 mm Predpfebn R Aljx Adned with cam control Cross table

Condition: used, total height: 1,900 mm, total length: 900 mm, total width: 800 mm, Empty weight: 500 kg - Documentation available: No - CE certificate present: No - Serial number: 120281 - Control: Conventional - Motor power: 1.5kW - Drilling depth: 160mm - Spindle speed max.: 1400rpm - Tool holder: MK3 Predpfx Aexz Egvodnjd - Table width: 460mm - Table length: 620mm - Spindle diameter: 20mm - Travel Z: 500mm - Number of axes: 1 - Spindle speed min.: 80rpm - Transport dimensions: 900mm x 800mm x 1900mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1999, serial number 1296 Prodpfxjxzu Ate Adned ja changer ja fach documentation ja control Heidenhain 426 weight of the machine ca. 6 t

Condition: good (used), ALZMETALL AB 3 ES column drilling machine Prodpfx Adjxxh Anonsd Speed: 80–1420 rpm Spindle: Morse taper 3 Mounted on running gear.

Condition: good (used), Year of construction: 2016, machine/vehicle number: PRJ052353, Offer 25490 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Drilling performance in steel ST 60: 50 mm - Drill spindle taper: MK 4 - Drill spindle stroke: 160 mm - Digital speed display - Throat depth: 300 mm - Swivel table with vice: 440 x 440 mm - Column diameter: 145 mm - Electromagnetic feeds: 0.1 – 0.2 – 0.3 – 0.4 mm/rev Predpfxsxy Hp Ae Adnsd - Infinitely variable drill spindle speeds with digital readout: 200 – 3200 rpm - Drive: 400 V / 1.8 / 2.9 kW - Lighting - Electrical foot switch - Required space (approx.): W 650 x H 1900 x D 800 mm - Weight (approx.): 470 kg

Condition: used, bore capacity in steel (diameter) 35 mm throat 280 mm bore stroke 180 mm 3 speeds 65 - 1750 U/min table-size 600 x 470 mm total power requirement 1,6 kW weight 450 kg Predpfx Adjwzmt Toned dimensions 1200 x 800 x 2200 mm Features: - Automatic feed - Coolant device - Infinitely variable speed control - Adjustable fixed depth stop - Machine light - Drill chuck

Condition: good (used), 37 Machine Tools • Years of manufacture 1970–2000 • Well-maintained condition For sale is an extensive selection of machines from a locksmith’s workshop or metalworking company, specializing in special-purpose machine construction. The total lot includes over 40 predominantly conventional machine tools, solid industrial quality, all well maintained and in full working order. Many machines have been repainted in red/blue for company identification, but are technically in good original condition. The package includes, among others: CNC Vertical Machining Center Alzmetall BAZ 15 CNC Universal Milling Machine Wemas WM3 Universal Milling Machine Deckel FP3A Guillotine Shear BRZESKA FABRYKA 2000/3 Mini Excavator / Multi-purpose device “BOBCAT” FAI 336 Two Band Saws Mössner Rekord (large and small) Cold Circular Saw Kaltenbach Mitre Saw with Table K180 Surface Grinders ABA and ST 30/50 Cylindrical Grinder MSO EDM Machine AEG-Elotherm Elbomat 400 Eccentric Press Helmerding TP8 Hydraulic Press FMA Pokorny 60080-01-5 Spindle Press 10 t Grinder Knuth Belt & Disk Sander 102800 Sandblasting Unit Tremor S.A. Vevey Column Jib Crane 500 kg Four Welding Machines TransMIG 400 Pillar Drill Siegfried Franzen Jungheinrich Pallet Stackers (electric high-lift truck) And numerous other machines, workshop equipment, and accessories. Condition: Consistently well-maintained workshop equipment, all machines functionally tested Some machines repainted in company colors (red/blue) Sturdy machines of high-quality German and European manufacture Terms & Logistics Purchase of individual items possible; removal to be handled by the buyer Ideally sold as a complete lot, available immediately, For full lot purchase, we can arrange transport and loading logistics. Viewing by appointment possible Interested? A complete machine list, technical data, photos, and pricing available on request. If you have questions or would like to arrange a viewing, please contact us. Prodpfoxx Tl Iox Adnjd

Condition: excellent (used), Year of construction: 1999, CNC MACHINING CENTER ALZMETALL BAZ 15 Year of construction : 1999 Top condition Technical data : X : 600mm Y : 400mm Z : 600mm Table : 750 x 450mm Main spindle : 10,000RPM Pjdeu Spdbjpfx Adnsrd Control : HEIDENHAIN TNC 426 24 magazine places

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 452 year of construction 1996 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm distance spindle nose to table 185 - 685 mm table size 490 x 400 mm Spindle speed 50 - 500 rpm. Stepless Drill slide feed rate 20 - 224 mm/min. Stepless Drill slide rapid traverse 4.5 m/min. Motor power feed 0.18 kW Motor power rapid traverse 0.75 kW Motor power drilling spindle 1.1 kW (speed 1000 rpm) Mains connection 400 volt, 50 Hz - Spindle speed infinitely variable via frequency converter - Drill slide feed infinitely variable via frequency converter - 2 operating modes set-up and automatic mode - central lubrication Pedpoikrtqsfx Adnjrd - control cabinet at the back of the machine - swivelling control panel - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 1000 kg. good condition

Condition: new, Year of construction: 2025, machine/vehicle number: PRJ068617, ALZMETALL Bench Drill Machine Drilling capacity in steel 14mm Short taper spindle MK2, spindle stroke: 80mm, throat: 190mm, column diameter: 65mm, machine table usable surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-table distance min. / max. 75/357mm, machine table height adjustment by hand crank, machine base plate, usable surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-base plate distance min. / max. 437/437mm, manual feed, machine height without options: 825mm, net weight: 83 kg. - Stepless speed adjustment 230–4000 rpm Standard equipment: 5" TFT LCD display with touch function: manual input for target spindle speed, actual speed indicator, integrated drilling depth display with touch zero reset, virtual drilling depth scale on display, machine status and warning messages on display, service information, selectable operating languages DE/EN/FR/ES/IT/NL/RU Single-phase motor 230 Volt, 50 Hz, plug pre-installed, cable length 2m, three separate pushbuttons for forward - reverse - stop, spindle lock with brake function, spindle guard with electrical interlock, lockable main switch, mushroom-head emergency-stop button (latching), stepless speed adjustment via potentiometer, protection class IP54, spindle guard with electrical interlock, finish: DD-structured paint signal white RAL 9003, PANTONE 7545c, black Prjdpfxelub Hto Adnjd Delivery time: ex stock Waiblingen Beinstein

Condition: used, Year of construction: 2001, With positioning table Heidenhain controller - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 856 - Control: CNC - Motor power: 3.0kW - Spindle speed max.: 3000rpm - Model: omboormachine - Digital readout: Yes - Tool holder: SK30 - Table width: 310mm - Table length: 980mm - Drilling capacity: 32mm - Travel X: 450mm - Travel Y: 900mm - Spindle diameter: 30mm - Travel Z: 300mm - Max. reach: 322mm Pjdpfx Aswh Smlodnsrd - Type digital: Ingebouwd - Number of axes: 3 - Spindle speed min.: 1rpm Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1999, bore capacity in steel (diameter) 36 mm throat 300 mm bore stroke 160 mm 4 speeds 100 - 1600 U/min column diameter 145 mm table-size 500 x 370 mm total power requirement 2,2 kW weight 440 kg dimensions 1200 x 800 x 2300 mm comes from a vocational school Features: - automatic feed - infinitely variable speed control - digital speed display - adjustable drilling depth stop Prsdpfx Adevzt Dyensd - drill spindle guard

Condition: good (used), Alzmetall BAZ 15 CNC – Vertical Machining Center • 3 axes • Heidenhain control For sale is an Alzmetall BAZ 15 CNC, a compact and robust vertical machining center equipped with a Heidenhain control system. The machine is still operational and can be inspected under power. It is in well-maintained, technically flawless condition. Technical Data Manufacturer: Alzmetall Model: BAZ 15 CNC Application: Milling Machine type: Vertical machining center Control system: Heidenhain Weight: 3,200 kg Table load: 500 kg Axes: 3 X travel: 600 mm Y travel: 400 mm Z travel: 600 mm Spindle speed: 9,000 rpm Tool magazine: 24 positions If interested, simply write or call. Prsdpfoxxxu Usx Adned

Condition: like new (used), functionality: fully functional, Performance in ST 60: 50 mm Speed range, stepless: 60 – 1200 rpm Motor power: 4 / 5.5 kW Psdsxiyvnjpfx Adnerd Short spindle: MK 5 5 drilling feeds: 0.1 - 0.14 – 0.2 – 0.28 – 0.4 mm/rev Weight approx. 1500 kg

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 449 year of construction 1995 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm spindle distance max. 685 Prodpfsgd Ipksx Adnod spindle distance min. 185 table size 490 x 400 mm spindle speed 2000 rpm autom. feed 224 mm/min. rapid traverse 4,5 m/min. motor power feed 0,18 kW motor power rapid traverse 0,75 kW motor power drilling spindle 1,5 kW Mains connection 400 Volt, 50 Hz - Prduction drilling machine with spindle speed and feed rate - actual spindle speed 2000 rpm. - actual feed speed 224 mm/min. - 2 operating modes manual and automatic - electric drill head height adjustment - central lubrication - control cabinet at the rear side of the machine - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 900 kg good condition

Condition: good (used), Column drilling machine ALZMETALL AB 4 SV, no. 5583, year of manufacture 14 C, spindle speeds 80 - 1,400 rpm. Pedpfx Aoxvc H Nednerd

Condition: excellent (used), Year of construction: 2008, operating hours: 3,500 h, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 650 mm, controller manufacturer: Heidenhain, controller model: TNC 530, rotational speed (max.): 8,000 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 3,500 h, coolant supply: 12 bar, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical travelling column machining centre ALZMETALL FS 2500 with 4th axis Year of manufacture: 2008 Control: Heidenhain TNC 530 Operating hours: approx. 3,500 h Technical data: Spindle speed: 0 - 8,000 rpm Drive power: 16.5 kW Tool holder: SK 40 Number of magazine slots: 40 Travels: X-axis: 2,500 mm Y-axis: 500 mm Z-axis: 650 mm Equipment: - Electronic handwheel - Coolant system 600 l with 12 bar for through-spindle coolant (IKZ) - Prepared for 3D probe - 4th axis Walter RT - Chip conveyor - Openings on left and right for overlength workpieces Prjdpfsxrbytjx Adnod

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Pjdpfx Aen N Ekcsdnerd Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Prodpfxsharwvj Adnjd Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ES Machine No. 21703 Year of manufacture: 1981 Drilling capacity: 32 mm Spindle taper: MK 3 - long quill Throat depth: 290 mm Quill stroke: 160 mm Table size: 510 x 300 mm Column diameter: 115 mm Spindle speed: 55 - 1450 rpm, stepless Motor power: 0.9 and 1.3 kW, pole-changeable - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless through variator gearbox - Intermediate gear stage for high torque at low speeds Psdpfxevu Dv He Adnsrd - RPM counter for spindle speed - Table height adjustable by handwheel - Machine lamp - Emergency stop via foot switch and kick switch - Quick-action drill chuck 1 to 13 mm Space requirement L x W x H: 1200 x 650 x 1900 mm Weight: 400 kg Very good condition Machine tested with 30 mm drill diameter in steel - runs very well