Used Aluminum Saw for sale (12,435)

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Prjdpfxsw Sy T Hj Adned

Year of construction: 1998, condition: ready for operation (used), Technical Specification Max. Cutting Length 3100 mm This SCHEER PA 4136 panel saw was manufactured in 1998. It features a cutting length of 3100 mm, cutting height of 70 mm, and a saw blade projection of 77 mm. Equipped with a 7 kW main saw unit and a 1.1 kW scoring motor, it offers a saw feed speed of up to 40 m/min. Consider the opportunity to buy this SCHEER PA 4136 panel saw. Contact us for more information. Application Types Sawing (Wood) Prodjxzvq Eopfx Adnod

Condition: used, Year of construction: 2013, cutting height (max.): 104 mm, total length: 2,600 mm, total width: 1,900 mm, total height: 1,800 mm, overall weight: 900 kg, slide length: 2,500 mm, sliding table length: 2,500 mm, No. 04505 Sliding table saw Felder K 700 S Used, year of construction 2013, very good condition Saw blade diameter 250 - 315 mm (350 mm not CE-compliant) Sliding table 2500 mm, anodized, edging shoe Cutting height max. 104 mm Predpexzvaajfx Adned Electric height adjustment Electric angle adjustment Digital display for cutting height and cutting angle Speed 4800 rpm Removable flange for grooving tools up to max. 229 mm diameter x 20 mm thickness Parallel fence with digital display and fine adjustment Cutting width 1250 mm Saw motor power 7.35 kW Circular saw unit with double segment suspension Scoring unit 0.75 kW Pivoting circular saw top guard, with 80 mm diameter extraction connection Circular saw table extension 430 x 508 mm Electric switch point with scoring unit on the sliding table Cross table 1150 x 600 mm, with cross-cut fence 2600 - 3200 mm Degree grid with length compensation Double mitre gauge Felder EGL 1350 with calculator Including 6 Silent Power saw blades for wood and aluminum (some unused), 1 scoring blade, 1 grooving/scoring disc Machine ready to plug in with cable and 16 A plug Incl. Technical documentation Transport dimensions approx. 2600 x 1900 x 1800 mm LWH Weight approx. 900 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 1980, 400 mm weight 1,3 t miter ja Predpfx Adexzu Dwensd

Condition: good (used), Code: 0246 Brand: OMGA Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm Psdpfx Adjxztydsnsrd N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Condition: used, Holtec package cross-cut saw Prjdpfjxzr Efox Adned - hydraulic lowering of the saw blade - length measurement - hydraulic package ejection

Condition: used, Year of construction: 2008, Cutting width: 4600 mm Cutting height: 2070 mm Cutting depth: 60 mm Saw blade diameter: 250 mm Feed: manual Prjdpfxsxrpk Hs Adnod Storage location: Supplier

Condition: ready for operation (used), Year of construction: 2019, General Data Prjdpfx Adjxzltcjnjd Machine weight 1500 kg Measurements height 1250 mm Dimensions Machine Length 2200 mm Technical Specification Working Width 930 mm Feed Speed 12 m/min This WINTER MBS 930 was manufactured in 2019. It features a motor power of 22.0 KW and a spindle diameter of 74 mm. The saw blade diameter is 205 mm, and it operates at a speed of 2600 rpm. Feed speed ranges from 0 to 12 m/min. Ideal for precise wood cutting. Contact us for more information. Application Types Sawing (Wood)

Condition: excellent (used), Year of construction: 1979, Bandsaw SR600 - Year of manufacture: 1979 - Upper & lower roller guide - Blade length: 4500 mm - Complete, with rip fence Prjdpfsxlkpdjx Adnod - Cast iron table - Very well maintained

Condition: good (used), Year of construction: 1989, Sawblade tiltable . ° cutting width .. mm Motor output . kW Prsdpfx Adsxzuy Senod serial number .

Condition: excellent (used), For sale is a used Felder K700 P panel saw with a cutting width of 800 mm. The machine is in very good condition and has been refurbished and inspected by our specialist staff. (Fully functional) Technical data: - Saw blade tiltable 90-45° - Sliding table 2000 mm - Short mitre fence 1100 mm - Extension table with mitre fence 2600 mm - Cutting width 800 mm with fine adjustment - Cutting height 102 mm (Saw blade D=315mm) - 5.5 HP (4kW) motor, 400 Volt - Machine No. 80-10/212-01 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Sale subject to prior sale! Related terms: Saw, circular saw, panel saw, panel Prjdpfsxzgd Aex Adnsd Reference: R-N44KA

Condition: new, Year of construction: 2025, Cutting length: 5100 mm Cutting height: 2200 mm Cutting depth: 60 mm Scoring unit: yes Feed: manual Horizontal cut display: digital Vertical cut display: digital Saw blade diameter: 300 mm Swing-out material support: yes Saw blade speed: approx. 4000 rpm Motor power: 3 kW Machine length: 6300 mm Machine depth: 1800 mm Prsdpfshpma Eex Adnod Machine height: 3100 mm Weight: 850 kg

Condition: used, Year of construction: 1999, Cutting width: 5300 mm Cutting height: 1910 mm Predpfx Adsxzu Eujnod Storage location: Nattheim

Condition: excellent (used), functionality: fully functional, Blade diameter: 350 mm Maximum cutting capacity: 4000 mm Pneumatic tilting of the heads Number of speeds: 2 Maximum blade speed: 2820 rpm Motor power: 4.8 kW Prjdsxzfa Njpfx Adnod Machine dimensions: 5600 x 1800 x 2000 mm Machine weight: 1400 kg

Condition: used, Year of construction: 1983, functionality: fully functional, Bäuerle table band saw, type BS 630, Series D, year of manufacture approx. 1983, robust design, wheel diameter 630 mm, wheel spacing 1280 mm, saw blade length 4500 mm, saw blade length (min – max) 4395 – 4530 mm, saw blade width (min – max) 10 – 25 mm, roller guides, cutting height 300 mm, 4 HP, 380 Volt, overall height 2135 mm, weight 564 kg Pedpjxf Hp Hefx Adnsrd

Condition: good (used), Year of construction: 1986, Sawblade tiltable . ° cutting width . mm Predpfx Adexzuy Ejnjd Motor output . kW

Condition: excellent (used), For sale is a used Record Power bandsaw BS 350 SABRE with a cutting width of 350 mm. The saw is in very good condition and has been refurbished and inspected by our qualified staff. (Fully functional) Technical data: - Motor: 1.5 HP / 230 V - Power input: 1,500 Watts - Cast iron flywheels, 350 mm diameter - Table size: 546 x 400 mm - Table height: 1,029 mm - Table tilt: 45° - T-slot size: 19 mm - Cutting height / width: 285 / 350 mm - 2 speeds: 440 / 1,000 m/min - Blade length: 2,820 mm - Blade width: 6 - 20 mm - Extraction port: 1 x 100 mm with bayonet fitting and 1 x 58 mm internal - 65 mm external diameter - Dimensions (L/W/H): 870 x 656 x 1,892 mm - Weight: 116 kg The bandsaw is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Prodexzfzyspfx Adned Related terms: bandsaw, saws, cutting machine, band Reference: R-D1618

Condition: good (used), Code: 0245 Brand: FRAMAR Model: 500 Band saw for cutting wood, plastic and various materials Technical data: Flywheel diameter 480 mm Predpfx Ajxzd Hzednjd Max cutting height 250 mm Three-phase motor Hp 2 v.380/50 Table dimensions 570 x 520 mm Foot brake Tilting table Suction port diameter 100 mm Overall dimensions mm 600 x 930 x 1870 h Weight 250 kg

Condition: excellent (used), Year of construction: 2023, saw blade diameter: 460 mm, cutting height (max.): 146 mm, TECHNICAL SPECIFICATION .. max. diameter of saw blade: 460 mm .. cutting capacity round: 146 mm .. cutting capacity square: 138 mm .. mitre cutting: no .. .. oblong: 250 mm .. .. .. x: 100 mm .. .. to: 220 mm/min DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2200 mm .. space requirements -front/back-: 1950 mm .. total height: 2000 mm .. total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60% Pedpfjxzbrnox Adnord

Condition: used, Year of construction: 1986, Roll diameter: 600 mm Cutting height: 385 mm Motor power: 2.2 kW Table tiltable Table size: 540 x 600 mm Total height: 2100 mm Weight: approx. 260 kg Storage location: Nattheim Psdjw D Aybjpfx Adnerd

Condition: good (used), Year of construction: 1991, Saw Blade Chamfering Machine Manufacturer: Loroch Model: AK Year of manufacture: 1991 Podehwixdopfx Adnsrd For chamfering HSS and segmental circular saw blades 251125ä

Condition: like new (used), For sale is a used Felder K700 panel saw with a cutting width of 800 mm. The machine was only briefly in use for demonstration purposes at our facility. Therefore, it can be considered as new and comes with full warranty/guarantee. Technical specifications: - Tilting circular saw 90-45° - Sliding table 1300 mm - Mitre fence 1100 mm - Cutting width 800 mm - 4 kW (5.5 HP) motor, 400 Volt - Machine no. 425.04.050.25 The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, panel Reference: R-N1194 Prjdpfx Adjxzd Aisnjd

Condition: good (used), Code: 0244 Brand: SCM Model: TECNOMAX FORMULA S 40 - CE Standard Panel saw with tilting blade and scoring unit for carpentry workshops, custom-made furniture, furniture, panels, doors, wooden window frames, plastics, composite materials, aluminium and various other materials - CE Standard Aluminium carriage length 3800 mm Cutting width with parallel guide 1500 mm Blade diameter 400 mm F30 Pjdpfx Aexzdt Uednsrd Scoring blade diameter 120 mm F20 Cutting height at 90° 130 mm Cutting height at 45° 92 mm Blade inclination 0-45 degrees Manual lifting and tilting by means of front handwheels Parallelogram blade guard Base suction port diameter 120 mm Blade guard suction port diameter 80 mm Motor power 7 Kw Outfeed table extension Overall dimensions of assembled machine mm 4000 x 4300 x 1500 h Overall dimensions of disassembled machine for transport mm 4000 x 1200 x 1500 h Weight kg 829

Condition: used, Year of construction: 1992, Wheel diameter: 500 mm, band guidance above and below, tiltable table Storage location: Supplier Prsdpfxjw D Aw He Adnjd

Condition: used, Year of construction: 2003, Cutting range: 5300 x 2240 x 80 mm Motor: 5.5 kW (7.5 HP) Saw blade: 300 mm Vertical cutting distance: 1000 mm Feed speed: 10-25 m/min Four-sided edging Independent pre-scoring saw unit Storage location: Supplier Podpfx Adjxy Tmbjnsrd