Used Luhoma for sale (3)

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good condition, like new; the machine comes from a very small joinery and was used only very little. The machine is in its original state and has only been cleaned, with no touch-ups to the paint. You can mill slots and drill dowel holes on two levels without having to reclamp the workpiece. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill slots, for example for lock cases and similar applications, or make all types of frame dowel joints, at right angles, butt joints, or mitred joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar applications. By drilling on two levels, using the stops and indexing rails, and due to the machine’s design, dowel joints can be produced in a very short time, which makes the machine highly efficient. The machine requires a compressed air connection of 6 bar (air consumption is very low). Right-hand rotation. Mills and drills very efficiently and cleanly. Supplied with 2 angle stops (one center stop and one side stop, which can be used on either side), plus a mitre stop. On the front of the machine table, there is a 2000mm long stop rail with 2 flip stops; the stop rail can be shortened or extended if required. Workpiece clamping is done with 2 pneumatic clamping cylinders. Gsdpfx Afsynv E Ro Uobi Height adjustment between drilling levels is also pneumatic; the pneumatic switch is located at the front of the machine, ensuring rapid adjustment of the index positions and drilling levels. Equipped with a precision 12mm indexing rail, featuring a center index and 12 indices left and right. Can be quickly converted for slot milling; in this mode, the machine can be used without indexing, with 2 adjustable stops left and right, allowing for a maximum working width of 420mm. Maximum drilling hole height: 100mm Maximum drilling depth: 150mm with stop and scale Maximum workpiece height: 160mm Everything functions perfectly. The machine is personally delivered and demonstrated by us anywhere in Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible on request. The machine table is 870mm wide, 140mm deep at the sides, and 350mm deep in the center. Professional equipment, not DIY store scrap. Ready for immediate operation. With 2-jaw drill chucks up to 20mm. Very stable and durable construction. The precision guides with play-free ball bearing bushings are in excellent condition and move smoothly.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Tilting Spindle Moulder MARTIN T25 Gjdpfx Afsyl Sp Hj Usbi Very good condition; the machine comes from a small carpentry shop that was unfortunately closed down. Everything works perfectly. All bearings and guides are in good condition. Year of manufacture: 1991. The fence jaw on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing jointing operations, such as for a gluing profile, to be performed. The entire fence can also be moved in depth with a handwheel and a threaded spindle, enabling very precise and fast adjustments. Equipped with AIGNER integral fence. With spindle lock by lever. Excellent chip extraction, with two extraction ports: 125 mm at the fence and 100 mm at the machine table. With 30 mm spindle, infinitely tiltable from -5 to 45°, tilting is electric with a very precise display. With forward/reverse rotation. We deliver and demonstrate the machine personally throughout Germany for €220.00, removing purchase risk; shipping to Austria and the rest of the EU is also possible on request. Large table opening up to 480 mm, which can be reduced using several rings (enabling use of large-diameter cutters and safe work with small cutters). With 3,000, 4,500, 6,000, and 9,000 rpm. Spindle height adjustment is also electric, with a precise digital display. Table made from high-ribbed cast iron. With interchangeable spindle (a 40 mm spindle can also be used). Very robust and durable design, built for heavy-duty milling; suitable for all milling operations. Optimal power transmission through V-belt drive. With manual and documentation. With 3-roller power feed unit HOLZ HER, type ET 117. Power feed offers forward/reverse rotation and 8 speeds; each feed roller is individually mounted. Machine table is 1,180 mm wide and 800 mm deep. Ready for immediate operation. 380V. With extra powerful motor, 7,500 and 9,500 W, via 2-speed operation. Equipped with all required safety devices, motor brake, and emergency stop; machine is BG-certified for woodworking and carries the GS safety mark. Machine weight approx. 1,200 kg. With motor protection switch against overload. Professional-grade machine, not DIY store junk. Optimal, simple, fast, and safe handling.

Condition: like new (used), Year of construction: 1997, functionality: fully functional, Dowel and mortise drilling machine HOFFMANN HR 150 Very good condition, as new. The machine comes from an installation company and shows virtually no signs of use—absolutely like new. It was only used for minor modification work and is now being sold because it has been idle for the last few years. With this machine, you can mill mortises and drill dowel holes on two levels without reclamping. Supplied with documentation. - 380V, 1500W - 2840 RPM - Year of manufacture: 1997 With the machine, you can mill mortises for lock cases and similar applications, create all types of frame dowel joints at right angles, butt joints, and miters. Ideally suited for dowel joint production in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar uses. Thanks to two-level drilling, indexing stops, and machine design, dowel joints can be produced in the shortest time possible, making the machine highly economical. Requires 6 bar compressed air connection (very low air consumption). - Right-hand rotation - Mills and drills precisely and cleanly - Fitted with mobile base - Two stops left and right on the machine table; an additional 45° miter stop is included - Two fold-out workpiece supports - Comes with 3 drill chucks: for drills with a 16 mm or 12 mm shank, and for drills with M10 thread - Workpiece clamping is achieved with two pneumatic cylinders operated via foot pedal, allowing you to hold the workpiece with both hands - Height adjustment between drilling levels is also pneumatic; the control switch is positioned at the adjustment lever for the indexing rail, ensuring quick changeover between indexing positions and drilling levels - Equipped with a precision 12 mm indexing rail with a center position and 13 stops left and right - Both drilling levels feature highly accurate counters, allowing for quick, easy, and precise setting of each drilling level height - Can also be used as a mortise drilling machine, with two adjustable stops left and right, providing up to 500 mm of lateral travel - The machine features a fence at the front of the table, height-adjustable as needed - Max hole height approx. 100 mm - Max drilling depth approx. 150 mm, with depth stop - Max workpiece height approx. 250 mm - All functions operate perfectly The machine can be personally delivered and demonstrated anywhere in Germany for 220.00 EUR, so you take no risk with your purchase. Delivery to Austria, Switzerland, and the rest of Europe is also possible. Machine table is 1,100 mm wide and 250 mm deep Professional-grade machine, not DIY store quality Gsdpjyhzilofx Af Usbi Ready for immediate use Very robust and durable construction Precision guides with play-free ball bearing bushings are in perfect working order and move smoothly Very stable and torsion-resistant design