Used Aluminium Injection for sale (4,147)

Condition: good (used), Year of construction: 2005, Ref. no.: 18591 Manufacturer: ARBURG Type: 520 A 1600-400 All Electric Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Dkedpfx Aboxf T I Ne Tsp Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this series include: * Fully electric drive for all main movements * High energy efficiency compared to hydraulic machines * Excellent injection and positioning accuracy * Quiet and clean operation (also suitable for medical applications) * Low maintenance requirements The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics. ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.

Condition: excellent (used), Tederic D680 Injection Molding Machine Model: D680 Year of manufacture: 2019 Robot: SW7315DS Robot year of manufacture: 2019 Technical data Parameter Value Clamping force 6,800 kN (680 tons) Column spacing 1010 × 1010 mm Diameter of centering ring (injection side) 250 mm Diameter of centering ring (ejector side) None Minimum mold height 450 mm Maximum mold height 1100 mm Distance between platens 2250 mm Maximum opening stroke 1800 mm Injection volume 2531 cm³ Hydraulic ejector Yes Number of hydraulic circuits 3 Core pulling capability Yes Short cooling circuit Yes Euromap / robot preparation Yes Screw diameter 85 mm Ejector stroke 300 mm Screw type Standard Motor power 53 kW Heater power 37 kW Equipment • SW7315DS linear robot • Hydraulic ejector • 3 hydraulic circuits • Euromap interface • Automation preparation • Short cooling circuit Operating history • Machine year of manufacture: 2019 Dodezilfbspfx Ab Tjkp • Total operating time: 31,272.6 h • Operating time in automatic mode: 9,990.2 h

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Dkodpfx Asx Sqi Hsb Tsp Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine Dedpfx Abeukn S Hs Tokp As shown in the pictures, its working condition is uncertain. Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Condition: used, Year of construction: 2018, TEDERIC D450/3200 injection molding machine with SW7315DS robot Manufacturer: TEDERIC Model: D450/3200 Year of manufacture: 2020 Serial number: T3045-0141 Robot: SW7315DS Robot year of manufacture: 2018 Technical data Clamping force: 4,500 kN Screw diameter: 75 mm Centering diameter: injection side: 200 mm moving side: 100 mm Column spacing: 780 × 780 mm Minimum mold height: 300 mm Maximum mold height: 780 mm Maximum platen spacing: 1,580 mm Maximum opening stroke: 800 mm Injection volume: 1,741 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 56 kW Dodpozii Efsfx Ab Tskp Heater power: 39.1 kW Screw diameter: 75 mm Ejector stroke: 200 mm Screw: bimetallic Machine condition Total operating hours: 42,864 h Automatic operating hours: 16,386 h SW7315DS robot (2018) included.

Condition: excellent (used), TEDERIC DT500 injection molding machine with RB200CN robot Manufacturer: TEDERIC Model: DT500 Year of manufacture: 2021 Serial number: T05000654 Robot: RB200CN Robot year of manufacture: 2015 Technical data Clamping force: 5,000 kN Screw diameter: 80 mm Centering diameter: injection side: 200 mm moving side: 100 mm Column spacing: 820 × 820 mm Minimum mold height: 320 mm Maximum mold height: 800 mm Maximum plate spacing: 1,650 mm Injection volume: 2,031 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: Djdszii D Uopfx Ab Tskp on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 68 kW Heater power: 46 kW Screw diameter: 80 mm Ejector stroke: 200 mm Screw: bimetallic Machine condition Operating hours: 17,437 h Automatic operating time: 4,009 h RB200CN robot (2015) included.

Condition: excellent (used), TEDERIC DT400 injection molding machine with FCW05-1000P robot Manufacturer: TEDERIC Model: DT400 Year of manufacture: 2021 Serial number: T04000648 Robot: FCW05-1000P Robot year of manufacture: 2019 Technical data Clamping force: 4,000 kN Screw diameter: 70 mm Centering diameter: injection side: 160 mm moving side: 100 mm Column spacing: 730 × 730 mm Minimum mold height: 280 mm Maximum mold height: 750 mm Maximum platen distance: 1,500 mm Injection volume: 1,347 cm³ Djdpfjzii Adsx Ab Tskp Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 40 kW Heater power: 33 kW Screw diameter: 70 mm Ejector stroke: 200 mm Screw: bimetallic Machine condition Operating hours: 21,518 h Automatic operating time: 8,912 h FCW05-1000P robot (2019) included.

Condition: excellent (used), Year of construction: 2015, TEDERIC D250/1100 injection molding machine with SW6310S robot Manufacturer: TEDERIC Model: D250/1100 Year of manufacture: 2015 Serial number: D1025/0747 Robot: SW6310S Robot year of manufacture: 2019 Technical specifications Clamping force: 2,500 kN Screw diameter: 55 mm Centering diameter: injection side: 160 mm moving side: 100 mm Column spacing: 580 × 580 mm Minimum mold height: 250 mm Maximum mold height: 600 mm Maximum platen spacing: 1,150 mm Maximum opening stroke: 550 mm Injection volume: 601 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Dkedpeziiyvsfx Ab Top Motor power: 31 kW Heater power: 19.7 kW Screw diameter: 55 mm Ejector stroke: 160 mm Screw: bimetallic Machine condition Total operating hours: 79,526 h Automatic operating hours: 40,612 h TEDERIC SW6310S robot (2019) included.

Condition: excellent (used), Year of construction: 2007, injection pressure: 2,061 bar, injection weight: 37 g, Clamping force: 35t Year of manufacture: 2007 Injection weight: 37g Injection unit 80 Screw diameter: 22 mm Specific injection pressure: 2061 bar Injection volume: 42 cc Injection weight: 37 g Screw L/D ratio: 20 Tool closing system 35 Dkodpfx Aezibz Sjb Top Clamping force: 35 t Tool plate dimensions: 390x390 mm Distance between columns: 280x280 mm Ejector force: 26 kN Ejector stroke: 100 mm Weight: 2200 kg Year of manufacture: 2007 Control system: MC4 Tooling: - Hydraulic core - Pneumatic valve

Condition: excellent (used), Year of construction: 2007, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Dsdpfx Aezibcijb Tekp Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 21953, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 405 mm, injection pressure: 1,300 bar, injection weight: 239 g, ejector stroke: 100 mm, installation height: 430 mm, total length: 3,910 mm, total width: 1,380 mm, total height: 2,050 mm, overall weight: 4,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, The machine is in good condition and has been maintained during operation with short maintenance intervals. The machine is connected and fully functional. An inspection with test run is possible. All machine documentation is available. The screw, heating cylinder tube, and RSP were renewed in 2022 by Plasma Kunststofftechnik. Basic data: - No: 21953 - Year of manufacture: 1991 - Weight: 4000 kg - Clamping force: 800 kN - Dimensions: 3910 mm x 1380 mm x 2050 mm (LxWxH) - Control system: CC100 Technical details: - Operating voltage: 400V 3~ 50Hz - Screw diameter: 45 mm - Screw geometry: 3-zone - Max. dosing stroke: 160 mm Dkjdpfx Aeziaczjb Tjp - Nozzle thread: M28x1.5 - Max. injection pressure: 1300 bar - Shot weight PS: 239 g - Tie bar spacing, horizontal: 405 mm - Tie bar spacing, vertical: 345 mm - Max. opening stroke: 430 mm - Min. installation height: 150 mm - Max. installation height: 430 mm - Centering diameter: 125 mm - Cooling circuits: 6 - Core pulls: 1 - Max. ejector stroke: 100 mm - Excl.: Piovan dosing unit, conveyor belt

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 161746, clamping force: 800 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, injection weight: 59 g, mold height (min.): 250 mm, opening stroke: 750 mm, total length: 4,300 mm, total width: 1,600 mm, total height: 2,014 mm, overall weight: 3,850 kg, heating capacity: 4.2 kW (5.71 HP), pump power: 22 W, power: 32 kW (43.51 HP), input frequency: 50 Hz, input voltage: 400 V, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. Djdpjx Srizjfx Ab Tekp The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our website to view our additional offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved.

Condition: used, Year of construction: 2001, operating hours: 60,790 h, clamping force: 60 kN, displacement volume: 224 cm³, injection pressure: 2,224 bar, overall weight: 3,350 kg, screw conveyor diameter: 18 mm, Min. mold height 15mm_Max. platen distance 575 + mm Payment: 100% prior to delivery Manufacturer: Battenfeld Type: BA600-50CDC Condition: überarbeitet Operating hours: 60.790 CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 425 mm Mould installation height min.: 350 mm Mould installation height max.: - Tie bar distance (h x v): 320 x 320 mm Plate dimension (h x v): 490 x 490 mm Centering (fix- movingplate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Injection weight in polystyrol: 20,4 g Stroke volume: 22,4 cm³ Einspritzdruck: 2.224 bar CONTROL: Unilog 4B Screen language: DE Operating manuel: DE Dsdpeh Tk Rvjfx Ab Tskp EQUIPMENT: - Core pulls: ! Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: 3,6 kW Pump drive power: 11,0 kW Total installed power: Motor + Heizung Total weight: 3.350 kg Total size L x B x H: 4,0 x 1,5 x 2,1 m

Condition: used, Year of construction: 2012, operating hours: 56,500 h, clamping force: 50 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 2,900 kg, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Dksdpfoy N Eccjx Ab Tep

Condition: used, Year of construction: 2010, operating hours: 55,000 h, clamping force: 110 kN, displacement volume: 113 cm³, injection pressure: 2,543 bar, overall weight: 7,200 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Dkedpfx Abjy Ntl So Tjp

Condition: used, Year of construction: 2006, operating hours: 60,000 h, clamping force: 200 kN, displacement volume: 154 cm³, injection pressure: 2,500 bar, overall weight: 9,500 kg, screw conveyor diameter: 35 mm, terms of delivery: FCA Pegnitz delivery time: on request Dkjdsyzt R Sjpfx Ab Top terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2012, operating hours: 69,990 h, clamping force: 320 kN, displacement volume: 154,314 cm³, injection pressure: 25,001,280 bar, overall weight: 14,500 kg, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz delivery time: on request Dodpfjxl Hi Tsx Ab Tokp terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, operating hours: 40,000 h, clamping force: 25 kN, displacement volume: 440 cm³, injection pressure: 1,550 bar, overall weight: 2,500 kg, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz Dkedpfjynbcnox Ab Tjp delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net Dsdpfswlkcaex Ab Tekp

Condition: used, Year of construction: 2008, operating hours: 35,000 h, clamping force: 100 kN, displacement volume: 51 cm³, injection pressure: 2,800 bar, overall weight: 5,000 kg, screw conveyor diameter: 25 mm, Freight base: FCA Pegnitz Dsdpjwlkb Njfx Ab Tekp Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Delivery time: by arrangement Dkodpfxswz R Iuj Ab Tsp Freight basis: ex-works

Condition: used, Year of construction: 2011, operating hours: 40,885 h, overall weight: 6,500 kg, displacement volume: 49 cm³, clamping force: 110 kN, injection pressure: 2,236 bar, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) delivery time: on request Dkjdpew N Egasfx Ab Top terms of payment: 100% prior to delivery

Condition: used, Year of construction: 1989, saw blade diameter 350 mm cutting diameter 115 mm capacity 90 degrees: flat 200 x 80 mm turning speeds 1700/3400 U/min saw-blade dia. 350 x 3.3 x 40 mm motor 400 Volt total power requirement 1.8 / 2.6 kW weight ca. 600 kg range L-W-H 1000 x 850 x 1500 mm - Inspected condition - Machine video - ?v=k-VA1e8rSJI Dkedpoxabw Usfx Ab Tjp Features: - Semi-automatic aluminum circular saw - Pneumatic material clamping - Infinitely variable adjustment of the saw head lowering speed - Machine table with miter adjustment - Machine base frame * without material stop as shown in the pictures

Condition: excellent (used), Year of construction: 2005, KM 500/2700C2 Technical Specifications Clamping Side: Clamping Force: 5000 kN Tie Bar Dimensions (H x V): 900 x 800 mm Minimum Installation Height: 480 mm Maximum Platen Distance: 1650 mm Dkedezgwbvopfx Ab Tep Centering: 200 mm Mold Weight: 7900 kg Injection Side: Screw Diameter: 80 mm Displacement: 1433 cc Injection Pressure: 1829 bar Equipment: MC 4 Control System Core Pulls: 2+2 Machine is sold without robots and peripherals!

Condition: excellent (used), Year of construction: 2007, Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Dkodpfezgwbcex Ab Tjp Year of manufacture: 2007 Control system: MC 4 Clamping Unit: Clamping force: 650 t Opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum platen daylight: 1,750 mm Tie bar spacing (h x v): 1,100 x 900 mm Platen dimensions (h x v): 1,510 x 1,370 mm Centering (nozzle-ejector plate): 200 / 200 mm 1st Injection Unit: Screw diameter: 80 mm Maximum shot weight in PS: 1,400 g Shot volume: 1,543 cm³ Injection pressure: 2,205 bar 2nd Injection Unit: Screw diameter: 45 mm Shot weight in polystyrene: 278 g Shot volume: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x air valves 16-fold cascade 3 x core pullers on moving platen 3 x core pullers on fixed platen 20 x hot runner controllers Robot interface: Euromap 67 Dimensions: Total weight: 34,500 kg Overall size (L x W x H): 7.8 x 2.5 x 2.5 m Operating hours: 45,400 h Machine can also be operated as a single-component machine (1K).