Used Alu Saw for sale (7,466)

Condition: new, Year of construction: 2024, Aluminum circular saw UK 352 P, manual The UK 352 P semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple miter angle adjustment. The UK 352 P has an infinitely adjustable miter range left up to 45° and right up to 0° The saw feed takes place automatically at the touch of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. Connections for a chip extraction system are available on this machine. equipment manual guiding of the saw blade Double miter 30° - 90° - 0°, large support plate, powerful drive motor Clear control panel Two vertical pneumatic clamping cylinders Fixed material positioning jaw, can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area minimum lubrication system Air gun to clean the machine Saw blade ø 350 mm workflow 1) Setting the cutting angle 2) Loading the material Kodeidunvepfx Ah Njdg 3) Bring the clamping cylinder up to 20 mm of material 4) Pneumatic clamping of the material 5) Press the start button to start the saw blade 6) the saw cut must be carried out manually with a hand lever 7) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Kjdpfxogwt Rvo Ah Nodg

Year of construction: 2023, condition: new, The UK 500 HA semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 500 HA has an infinitely adjustable miter range of up to 30° on the left and 0° on the right. The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose Kdedpogwt R Dsfx Ah Nsg • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 180 mm • Saw blade 500mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, Aluminum circular saw BC 450 HA, semi-automatic (MG FRONT-450) The BC 450 HA is a double miter saw with a swivel range of 45° to the left and Kdedpfopa Nxaox Ah Nog 22.5° to the right and an automatic mitre adjustment via stop functions. The saw stroke runs automatically and the material is clamped pneumatically. The saw blade (450 x 30 mm) runs horizontally. can also be optionally equipped with a digital mitre angle display, a scribing laser and pneumatics for lifting the protective hood! Equipment Double mitre machine with powerful drive motor Two-button control for triggering the saw cut (optionally also available as one-button control) Large mitre range from -22.5° to +45°, Swivel range 67.5° - 0° - 45° Automatic miter adjustment, fixed stop functions at -45° / 90° / +45° and two variable stop functions adjustable to the desired angle! Two horizontal pneumatic clamping cylinders Clearly arranged control panel Large protective hood covers the entire working area, is lifted pneumatically Adjustable blade and cutting feed Connections for extraction system Minimal lubrication system Air gun for cleaning the machine Saw blade ø 450 mm Work sequence 1. setting the cutting angle 2. inserting the material 3. adjusting the stroke speed 4. bring the clamping cylinder to within 20 mm of the material 5. clamp the material 6. press the The machine is ready for operation by pressing the start button. 7. press and hold the two SAW buttons, the material is sawn. 8. 8. at the end of the cycle, release both SAW buttons and press the STOP button 9. 9. open the clamping vice and remove or advance the material Plantec Maschinen GmbH

Condition: new, Tubend aluminum circular saw / underfloor saw AC 550 Special equipment included in the price: Kedpjkckx Usfx Ah Nedg Pneumatic vertical and horizontal clamping by 4 clamping jacks Feed of the saw blade steplessly adjustable Minimum quantity lubrication 3m roller conveyor Description saw blade diameter: 550 x 32 x 4 mm speed 3580 rpm Cutting area 90° rectangular 260 x 200 mm Cutting area 90° square 155 x 155 mm Cutting area 45° rectangular 180 x 200 mm Cutting area 45° square 130 x130 mm Operating pressure 6 - 8 bar Operating voltage 380 V Total power requirement 3 kW Machine weight approx. 250 kg

Condition: new, Year of construction: 2023, IN STOCK -- Fully automatic aluminium circular saw with 90° cutting capability and drilling unit TR 12 (up to ø10 mm) or TR 20 (up to ø20 mm), featuring simple and safe operation with excellent cutting performance. This machine is capable of only making 90° cuts, allowing workpieces to be drilled and cut in a single workflow. Technical Specifications: ● Cutting range: 90°: round 100 mm / square 100 x 100 mm / rectangle 170 x 60 mm ● Drive power: 1,9 kW / 400 V / 50 Hz ● Speed: 3000 RPM ● Feed: Single feed 300 mm (double stroke up to 600 mm) ● Max. Cutting Height: 100 mm ● Blade Dimension: 350 x 32 mm Standard Equipment: ● Machine with 90° cutting capability, powered by a high-performance motor ● Clear and large-sized control panel ● Length adjustment from 5 to 300 mm via handwheel and counter ● Main clamping unit with 3 pneumatic clamping cylinders (1 horizontal, 2 vertical) ● Feed clamping unit with horizontal and vertical pneumatic clamping cylinder ● Large protective cover, covering the entire working area, pneumatically raised ● Adjustable cutting and feed speed ● Air gun for cleaning the machine ● Connections for dust extraction system ● Minimal lubrication system ● TR 12 or TR 20, fixed automatic drilling unit with one tool holder; spindle speed adjustment, drilling depth, etc. are manually adjusted; drilling cycle occurs automatically Ksdpfx Aemftiweh Nedg --> Also availabe with CNC control or in various sizes!

Condition: new, Year of construction: 2024, Aluminum circular saw UK 650 HA, semi-automatic Kdjdpfoidun Dex Ah Nog The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 650 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 650 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2023, condition: new, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment left 45º / 90º / right-45º degrees • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling Kodpfegwt Ryex Ah Nodg • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 125 mm • Saw blade 350mm • Saw blade not included!

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 1,000 mm, total width: 600 mm, total height: 1,400 mm, cutting range round steel at 45°: 90 mm, cutting height (max.): 105 mm, saw drive: 4,700 W, empty load weight: 200 kg, COSEN CIRCULAR SAWS MANUAL MC-315 These circular saws are new in the COSEN portfolio, and are available in manual, which means you have to pull the lever down to cut. Technical features: Compact, pedestal-mounted, hand-operated circular saws can be easily handled in the workshop or even on factories. Hand-operated vise Kdjdpfjv R Dxasx Ah Nsg Heavy duty motor Robust construction Low voltage on/off switch 45° and 90° bevel cutting Two cutting speeds Electric coolant pump with tank COSEN MC-315 CURRENT POWER: 400V DISC DIAMETER: 315 mm MOTOR CAPACITY: 4.7 kW DIMENSIONS: 1000 x 600 x 1400 mm WEIGHT: 200 kg RPM 45/90 RPM MAXIMUM CUTTING CAPACITY ROUND MATERIAL 90°: 105 mm; 45°: 90 mm SQUARE MATERIAL 90°: 85 x 85 mm; 45°: 80 x 80 mm RECTANGULAR MATERIAL 90°: 120 x 60 mm; 45°: 90 x 60 mm

Condition: new, Year of construction: 2024, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used for cutting profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast, convenient material changes as well as simple mitre angle adjustment. The UK 352 HA has a continuously adjustable mitre range of up to 45° on the left and 0° on the right. The saw feed is automatic at the touch of a button and the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes with a minimum lubrication system and an air spray gun for cleaning the machine as standard! Connections for a chip extraction system are available on this machine. Equipment - Precision underfloor circular saw - Mitre adjustment left 45º / 90º / right-45º degrees Kdsdogwt Rrspfx Ah Nog - incl. 2 pneumatic clamping vices (vertical) - Saw blade feed infinitely adjustable - Two-hand safety control - Adjustable material stop (rear) - Extraction device - chip extraction system - Mist spraying device for air-oil cooling - Air gun with spiral hose - incl. maintenance unit with pressure reducer - Ergonomically arranged control panel - Max. cutting height 125 mm - Saw blade 350 mm - Saw blade not included in scope of delivery! It is possible for you to view the desired system in our production/demonstration hall at any time. Please do not hesitate to contact us. Plantec Maschinen GmbH

Condition: new, Year of construction: 2024, The UK-350-P is a manual table saw with simple, safe operation! Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK-350-P has a compact design with clear operation. The saw cut is made manually from below into the material to be processed. The material is clamped pneumatically. Fixed protection from the cutting area. Ksdpsgcbuwjfx Ah Nsdg

Condition: ready for operation (used), Year of construction: 1992, - Double mitre circular saw ADS type M Kodpfx Asucuhdjh Nodg - 2 saw heads - max. saw length 5000mm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 11900715/C, saw blade diameter: 350 mm, feed length X-axis: 180 mm, feed length Z-axis: 170 mm, total length: 2,210 mm, total width: 1,100 mm, total height: 1,550 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 120 mm, type of input current: three-phase, rotational speed (min.): 15 rpm, rotational speed (max.): 90 rpm, cutting height (max.): 170 mm, overall weight: 530 kg, saw blade speed: 90 rpm, input voltage: 400 V, cutting range square steel at 45°: 100 mm, cutting range square steel at 90°: 105 mm, saw drive: 2,200 W, cutting diameter: 120 mm, saw blade bore: 32 mm, 2000 MEP Cobra 350AX Automatic Circular Cold Saw – Efficient Metal Cutting for Industrial Production Available now: MEP Cobra 350AX, a robust automatic cut-off circular saw, perfect for industrial metal cutting applications. Manufactured in 2000 and in good working condition, this machine combines manual and automatic operation modes, adjustable cutting settings, and a 350mm blade to deliver consistent, high-quality cuts. 🔧 Key Features: Blade Size: 350 × 32 × 2.5mm Spindle Motor Power: 2.2kW Blade Speeds: 15 / 30 / 45 / 90 rpm Vice Opening: 160mm Clamping Type: Pneumatic Power Supply: 400V / 3 Phase / 50Hz Manual & Automatic Modes: Yes Cutting Depth & Stop Height: Fully adjustable Machine Weight: 530kg Dimensions (L×W×H): 2210 × 1100 × 1550mm 📏 Cutting Capacities: At 0°: Round: 120mm Rectangular: 180 × 170mm Square: 105 × 105mm At 45° Left: Round: 120mm Rectangular: 135 × 60mm Square: 100 × 100mm At 45° Right: Round: 110mm Kodpfx Ajwtr Iyeh Nsdg Rectangular: 135 × 60mm Square: 95 × 95mm ⚙️ Ideal Applications: Cutting steel profiles, tubes, bars Suitable for light to medium-duty industrial production Great for fabrication shops, stockholders, and manufacturing plants ✅ Why Choose the MEP Cobra 350AX? Versatile cutting angles and profiles Dual operation mode (automatic/manual) Compact, efficient, and easy to integrate into existing workflows Pneumatic clamping ensures safety and consistency Low investment cost means big savings on a high-value machine MEP Cobra 350AX for sale Used automatic circular saw Cold saw for metal cutting Pneumatic clamping cold saw 350mm circular saw machine Industrial metal cut-off saw MEP saw 2000 model Automatic metal saw Ireland Circular saw for steel profiles 400V industrial cold saw

Condition: used, Year of construction: 1999, machine/vehicle number: 012563001, rotational speed (max.): 3,600 rpm, input voltage: 400 V, For cutting aluminum profiles with miter cuts Year of manufacture: 1999 Kdjdpfjwl Uzysx Ah Nog Advance payment Transport costs not included

Condition: good (used), Year of construction: 2005, functionality: fully functional, saw blade diameter: 500 mm, Complete aluminum window production machines for sale. Pertici automatic double miter saw 6000 mm End milling machine Jig milling machine Corner crimping machine Aluminum profile stand with wheels Kdsdjwmq R Hepfx Ah Njg Adjustable production table Workbench €15,000 for all machines!

Condition: new, Year of construction: 2023, SPECIAL PRICE, Stock machine Year 2023, Condition: new List price + option minimal lubrication system LUBETOOL: €15,370 STOCK MACHINE – Fully Automatic Aluminium Circular Saw 90° Cut With easy, safe operation and excellent cutting performance. This machine is only capable of 90° cuts! Technical data: ● Cutting capacity: 90° round: 100 mm / square: 100 x 100 mm / rectangular: 170 x 60 mm ● Drive power: 1.9 kW / 400 V / 50 Hz ● Speed: 3,000 rpm ● Feed: Single-stroke feed 300 mm (double stroke up to 600 mm) ● Max. cutting height: 100 mm ● Blade size: 350 x 32 mm Standard features: ● Machine for 90° cuts, equipped with a powerful drive motor ● Clear, large-sized control panel ● Adjustable cut-off length from 5 to 300 mm via handwheel and counter ● Main vice with 3 pneumatic clamping cylinders: 1 horizontal, 2 vertical ● Feed vice with horizontal and vertical pneumatic clamping cylinder ● Large safety guard, fully covering the working area, pneumatically lifted ● Adjustable cutting and feed speed Kedpfx Ajvurgyoh Nodg ● Air gun for cleaning the machine ● Connections for extraction system Optional, mounted on stock machine: ● Minimum quantity lubrication system "LUBETOOL" with one pump and pressure regulation

Condition: new, Tubend aluminum circular saw / underfloor saw AC 400 Special equipment included in the price: Pneumatic vertical and horizontal clamping by 4 clamping jacks Minimum quantity lubrication 3m roller conveyor Description saw blade diameter: 400 x 32 x 4 mm speed 3000 rpm cutting area 90° rectangular 150 x 100 mm Cutting area 90° square 120 x 120 mm Cutting area 45° rectangular 130 x 80 mm Cutting area 45° square 100 x100 mm Operating pressure 6 - 8 bar Operating voltage 380 V Total power requirement 1,5 kW Kdodpfx Ahekckgvj Neg Machine weight approx. 140 kg

Condition: new, Year of construction: 2024, Aluminum circular saw UK 350 M, manual (MG TL-350-M) The UK 350 M is a manual table saw with simple, safe operation! With this machine double miter cuts up to 45° right and left are possible. The miter adjustment is done here by turning the stop jaw. The UK 350 M has a compact design with clear operation. The saw cut is made manually from below into the material to be processed. The material is stretched manually. Fixed protection from the cutting area. equipment Compact, closed design with clear operation Manual clamping device Fixed protection from the cutting area Saw blade ø 350 mm workflow 1) Setting the cutting angle 2) Loading the material Kedpeidqk Sjfx Ah Nsdg 3) manual clamping of the material 4) Press the start button to start the saw blade 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! without base (optionally available) ! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, Aluminum circular saw UK 352 M, manual The UK 352 M manual circular saw is an "upcut" machine and is mainly used for individual cuts in aluminium, copper profiles and hard plastics (requires solid material). The The machine is characterized by easy handling and fast, convenient changing of the material and simple adjustment of the miter angle. The UK 352 M has a stepless adjustable miter range left up to 45° and right up to 0°. The saw feed is manual via a hand lever, the material is clamped manually. equipment Double miter 45° - 90° - 0°, large support plate, powerful drive motor Clear control panel A manual clamping cylinder Fixed material feed jaw can be moved backwards to increase cutting capacity large protective hood, covers the entire work area Saw blade ø 350 mm workflow 1) Setting the cutting angle 2) Loading the material 3) manual clamping of the material 4) Press the start button to start the saw blade 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! Kedoidunnopfx Ah Nodg It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, pressure: 6 bar, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Kdodpfx Ahjgcbwgs Nog

Condition: new, Year of construction: 2024, The UK-400-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-400 A has an infinitely adjustable miter range left and right up to 20° (swivel range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control Ksdpfjgwt Rnsx Ah Nsdg • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 130mm • Saw blade 400mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2023, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Kjdpfx Asfv T Ansh Nodg

Condition: new, Year of construction: 2024, Aluminum circular saw UK 300 M, manual The UK 300 M is a manual table saw with simple, safe operation. Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK 300 M has a compact design with clear operation. The saw cut is done manually from below into the material to be processed. The material is stretched manually. Fixed protection from the cutting area. equipment Compact, closed design with clear operation Manual clamping device Fixed protection from the cutting area Saw blade ø 300 mm Manual cutting feed Miter adjustment left 45º / 90º / right-45º degrees integrated manual length stop ideal for mobile use ideal for profile cuts workflow 1) Setting the cutting angle 2) Loading the material 3) manual clamping of the material 4) Press the start button to start the saw blade 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! without base (optionally available) ! Kedjidqahspfx Ah Nedg It is always possible for you to inspect the desired machine in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, sawing system type "ORIX" Kodpfx Asfu Tgrsh Nsdg With the sawing system, a wide variety of aluminum profiles can be processed fully automatically. The machine consists of a stable base. Star guides and precision carriages are used to position the saw unit. The drives are equipped with servo motors. For sawing, the saw unit moves 300 mm forwards on the Y-axis and can easily saw special profiles, panels or Item and Bosch profiles. The support table consists of moveable rollers that are moved to the correct position depending on the section length. All rollers are also mounted on precision carriages. The saw also has a stable storage table on which the sawn-off aluminum parts are placed. (Optionally, the sawn parts can also be transported away directly via a conveyor belt, including the chips). The machine is available with a section length of 6,000 mm. It therefore has a total length of 7,000 mm. The sawing system is delivered with a suitable 2-channel minimum quantity spray system. In addition, the system will be delivered with a 400 or 600 saw blade.

Condition: new, Surplus stock / Remaining stock Kedpfx Ahsw Skr To Nedg . ALU – plates with certificate . - 2x 2205 x 2504 x height 60mm, 911kg each / AlMg4.5Mn (5083) with certificate - Sale price per piece = €2,687 – negotiable . - 2x 2205 x 2504 x height 70mm, 1,063kg each / AlMg4.5Mn (5083) with certificate - Sale price per piece = €3,135 – negotiable .