Band saw

Braun Canali TB 1100 Unimaster

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, power: 242.71 kW (329.99 HP), DOPPSTADT AK 330 S Diesel engine: 330 HP Equipped with: Screen basket (hole site: 120 mm), radio remote control, original vehicle papers. Klodpfxey Duuws Ap Aow Service was done. New tyres in April 2026. In very good and working condition.

Condition: new, Year of construction: 2026, Maximize Profit with TRV 1200L and TRV 1600L: From Sawmill to Firewood TRV 1200L Ø550: Efficiency and Speed for Continuous Cutting Optimize waste management and turn production scraps into immediate economic value! The TRV 1200L Ø550, with its advanced design, is the ideal solution for sawmills needing to dispose of large amounts of multilaminate trims and log side sections. The result? A continuous and automated disposal process that converts waste into high-quality firewood. Key Features: Simplified handling: randomly load trims and waste onto the low-wear conveyor/roller VV. Smart clamping system: innovative technology allows processing of overlapping pieces of different shapes and thicknesses. Advanced precision: PLC-automated cutting system with timed length control of trimmed pieces. Independent sectors: equipped with 5 sectors, each with its own pneumatic cylinder and shock absorbers for maximum stability. Enhanced Safety: Advanced protection system: access door to moving parts with forced-lock safety micro-switch. Sealed, non-duplicable security key for exclusive access. Kodov Ip T Rjpfx Ap Aslw Protective tunnel with sealed key and reinforced blade guard for superior safety. Rapid blade motor stop (

Condition: good (used), Board sorting system / sorting system / length sorting system, Esterer Right-hand discharge 5 sorting bins Total length 26 meters 1. Bin: 2 meters 2. Bin: 3 meters 3. Bin: 4 meters 4. Bin: 5 meters 5. Bin: >5 meters Ksdpfx Aegw Scqop Aelw In good condition – immediately available Location: Germany, near Landau an der Isar Please also check out my other listings. I look forward to your inquiry.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 300 h, power: 305 kW (414.68 HP), motor manufacturer: izuzu, gearing type: automatic, fuel type: diesel, maximum speed: 50 km/h, first registration: 01/2024, color: red, front tire size: 600/70r30, rear tire size: vf 710/70r42, machine/vehicle number: vkkmb770cpb325022, Equipment: additional headlights, air conditioning, cabin, lighting, trailer coupling, yield monitor with GPS, new tractor due to business shutdown photo on request Kedpfewm Rdgox Ap Ajlw

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Kedpfx Apev Si Szs Aolw Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 1980, condition: good (used), Stellite forming machine VOLLMER GF10U Sheet thickness: 1 to 4 mm Width of band saw blades: 60 to 420 mm Ksdpfx Aegxb Ebop Aolw Circular saw blades: 300 to 1,200 mm diameter Electric feed drive via geared motor

Condition: excellent (used), functionality: fully functional, Söderhamn small log line with Euromill profiles Debarker Cambio 45 with infeed and guide work after Kodpfewp E E Dex Ap Aslw 2D scanner Söderhamn 447 infeed 240-12 chipper canters Block tilt and infeed 240-12 chipper canter Euromill profiles Board separator with adjustable center Chip conveyor under saw line Hydraulic units and electrical cabinet.

Condition: used, Valon Kone VK26M With infeed and outfeed conveyors. Kodpsvgtz Nsfx Ap Ajlw

Condition: new, VKM supplies spare parts for Oswald and some Bezner-Oswald machine, BÖGLI bandsaws and replacement knives for various woodworking machines. Partly the parts can be delivered from stock. For the knives, send us your desired dimension and we can offer and supply them to you at a reasonable price. Kedpfx Apog Rn Avs Aelw Send us your inquiry today!

Condition: used, cutting height (max.): 1,200 mm, cutting width (max.): 1,200 mm, cutting length (max.): 6,000 mm, spindle motor power: 5,000 W, fixed bench, pivoting head Kljdpfx Ajyzrcmop Asw chain with diagonal vertical movement automatic cutting waste collection mat