Used Pre-setting tools for sale (44)

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, measuring range X-axis: 400 mm, measuring range Z-axis: 400 mm, incl. Image Controller Bws Iewhdx Tja Sblbel

Condition: ready for operation (used), Zoller V420 tool presetter with instructions and replacement bulbs Bwo Iowg R T Isa Sblbjl

Condition: good (used), Internal Item No.: 25015 Tool Presetter Garant VG1 Bwj Ia Sbewduvhelbol Year of Manufacture: 2014 Very well-maintained condition!! Main chuck: SK50 Including reduction chuck: SK40 Including workbench Measuring range: X 400mm / Z 500mm

Condition: used, Year of construction: 2010, with various accessories Bwe Ia Sewdbuqeblbel

Condition: used, Year of construction: 2014, measuring range X-axis 0-200 mm measuring range Z-axis 0-400 mm tool diameter max. 250 mm voltage 90-260 V Electric capacity ca. 30 Watt weight 50 kg Dimensions (HxWxD) 900x500x700 mm Bs Iaswbvmvo Sblbswl working pressure 4-6 bar Control Smart-Pro III Accompanying documentation: - KENOVA set line V4 operating instructions - User manual for operating the Smart-Pro III PC control unit

Condition: used, measuring range X-axis 420 mm measuring range Y-axis 370 mm tool adaptor VDI 40 / VDI 50 voltage 230 V total power requirement 100 VA weight 700 kg dimensions of the machine ca. 1,55 x 0,90 x 1,55 mm Bwj Ia Sed Scrneblbjl - Serial - No.: 1144 - digital readout KELCH Pico - VDI 40 / VDI 50

Condition: used, Year of construction: 2006, measuring range X-axis 400 mm measuring range Z-axis 400 mm Bs Ia Sbev U Dhiolbjwl max. tool weight 10 kg voltage 85 -265 V compressed air 4 - 6 bar

Condition: used, Year of construction: 1997, diameter - cutter special 30 mm draw-in arbor diameter 40 mm clamping height 310 mm Be Ia Sblev Uchbobewl circle diameter 80-300 mm weight 30 kg

Condition: good (used), Manufacturer: SOMET Tip: SDJ 300 Measurable tool diameter: 6 - 300 mm Measurable tool length: 40 - 500 mm Bj Iasd N S Ube Sblbowl Accuracy: 0.002 mm 1x Swap socket ISO 40 1x Swap socket ISO 45 1x Swap socket ISO 50 1x Test mandrel ISO 50 used! Dimensions: 1250 x 600 x 1870 mm

Condition: used, Year of construction: 2005, measuring range X-axis 130 mm measuring range Y-axis 370 mm Be Iaevdudye Sblbjwl In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 00156, measuring range X-axis: 500 mm, measuring range Z-axis: 500 mm, 2006 zoller hyperion H520 HSK63 tool holder Bwe Ia Seuvifxsblbol also possible add tool holder from manufacture - SK40 - 700euro -VDI50 - 1000euro

Condition: used, Technical details: max. temperature: 150° Grad voltage: 380 Volt V / Hz Bj Isu N Ag Rea Sblbjwl current- max.: 6,5 A weight: 65 kg dimensions L x W x H: 0,68 x 0,22 x 0,58 m Working Area / Application: water tempering system transportable - connection coolant water: inlet and outlet Ø 12mm internal with bayonet connection - connection circulating medium: inlet and outlet Ø 12mm with bayonet connection - control via control panel equipment: - 1400mm connection cable Optional test run possible. *

Condition: excellent (used), Tool setting device (24310) For SK 50 Be Ia Sjhc I Uvoblbswl

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: SMILE420X-03746, Equipment: type plate available, Zoller smile 420 / pilot 4.0 Bwj Ia Sblov Sz H Dsbel Pilot 4.0 program HSK-63 tool adaptor See brochure for further details Pick-up only

Condition: used, Year of construction: 1987, measuring range X-axis 540 mm measuring range Z-axis 400 mm table diameter 740 mm enlargement 20fach range L-W-H ca. 1,70 x 1,00 x 1,70 mm weight ca. 600 kg acc.: DRO on 2 axis Bws Ia Setqqk Eoblbel

Condition: used, Year of construction: 1998, total power requirement 1 kW weight of the machine ca. 0,36 t In our opinion, the machine is in good used condition and can be viewed Be Ia Sbljvdt Tmjbewl under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2017, Bilz induction shrinking device ISGG3412WK-11 Technical data: Automatic cooling and drying of the holders in seconds using special "cool-down" technology, liquid cooling, cooling time 20s for tools up to 6 kg Shrinking range HM Ø 3 mm - Ø 32 mm (1.25") Shrinking range HSS Ø 6 mm - Ø 32 mm (1.25") up to HSK-A 100, SK50 max. tool length 400 mm max. cooling length 200 mm Work surface with protective cover made of black rubber, including stainless steel tool tray Dimensions (W x L x H) 800 x 560 x 1720 mm Fixed coil, 4 standard interchangeable discs Bwj Ia Ssvrk Hgsblbjl Compressed air supply 4 bar Description: Device type: Floor-standing device, fully automatic Shrinking device with integrated liquid cooling, sufficient cooling servers for increased throughput thanks to large coolant tank and including graphic control panel Bilz technology advantage: Fast and even heating of the shrink chuck increases its service life Contour-independent cooling protects the cutting edge User safety: heating and cooling in one position Patented ferrite disk system optimizes the heating process: only the chuck is heated, not the tool Cooling emulsion with corrosion protection for shrink chucks and tools

Condition: used, Year of construction: 1990, Technical details: Bj Ia Seu N Ap Ejblbowl total power requirement: 125 VA / 50Hz machine weight approx.: 0,3 t dimension machine xH: 0,8 x 0,7 x 1,6 (mit Tisch) m This is a tabletop device according to the optical measuring method. - incl. under table Application: - setting of tools of NC lathes other features: - coordinate of the bridge adjustment=200mm - coordinate of the slide adjustment=350mm - enlargement of the projector 20x - accuracy of cutting adjustment on projector=0,005mm - smallest measuring length=0,002mm - lower edge of measuring holder up to table=150 - 170mm - reading the tool coordinates opt. -4 - table WxDxH: 545 x700 x 110mm - base frame with drawer: WxDxH: 586 x 700 x 730mm *

Condition: used, Year of construction: 2000, x-travel 160 mm z-travel 340 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Bws Ia Sevyut Hjblbjl Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2014, measuring range X-axis 500 mm measuring range Y-axis 400 mm Bj Ia Ssvrk Hasblbswl

Condition: used, Technical details: x-travel: 130 mm y-travel: - mm z-travel: 140 mm machine weight approx.: 107 kg dimensions L x W x H: 0,72 x 0,33 x 0,63 m Concentricity Gauge Device and Presetting Device (table device) - application: measuring device for production components (helical tooth gears), testing and adjusting of milling tools Characteristics: - longitudinal axis approx. 100 mm, Ø 280 mm - tool slides: turning range 360 °, tool holder Ø 30 x 80 mm, size LxW: 200x175 mm, with measuring device measuring rod Ø 8 x 400 mm adjustable - vertical slide: pin gage Ø 20 x 80 mm Bj Ia Seu N Apfeblbswl *

Condition: used, Year of construction: 2014, x-travel 700 mm y-axis 550 mm z-travel 400 mm max. table load 650 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Bwe Ia Sblsvza Dyebsl Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2011, Technical details: measuring range X-axis: Länge: 0 - 160 mm measuring range Y-axis: Höhe: 0 - 425 mm Tool table: Auflage: Ø 95 mm tool taper: SK 50 tool taper: drehbar 360° weight: 12 kg dimension L-W-H: 420 x 165 x 775 mm Be Ia Sou N Artsblbowl This is a bench top unit. Application: Alignment of rotary milling tools. Measuring method: manual alignment with/via digital display Measuring bar manually movable Measuring beam transverse (X) 160mm and vertical (Y) 425mm movable with measuring sensor Measuring display: both axes digital, voltage 1.5 V (AA battery) *

Condition: used, Technical details: Bs Isu N Aprja Sblbowl x-travel: 100 mm y-travel: 450 mm z-travel: 400 mm tool taper: SK 40 - Ø 22mm machine weight approx.: 138 kg dimensions L x W x H: 0,72 x 0,38 x 0,99 m characteristics: - measuring area longitudinal axis z=400mm, diameter x= Ø 200mm, diameter y = fixed - tool holder for SK 40 / SK 45 / SK 50, rotation area 360°, max. tools Ø 220mm, receptive cylinder Ø 80mm - dial gauge holder combinable for longitudinal path X and transverse path Y accessories: - 3 pcs tool tapers SK40 + SK45 + SK50 - 2 used dial gauges The device is on sale as described, on sale as is! *

Condition: used, Year of construction: 2010, Technical details: Be Isva Atnsa Sblbswl measuring range X-axis: 280 mm measuring range Y-axis: 300 mm tool taper: SK 40 tool taper: drehbar 360° compressed air: notwendig bar voltage: 220 V weight: ca. 70 kg dimension L-W-H: 900 x 475 x 820 mm Application of rotary tools Measuring method: optical / point and line measurement (line, angle, radius, perpendicular, with center point and concentricity) Measuring beam movable by handwheel, X-axis = 140 mm and Z-axis = 300 mm, transmitted light LED illumination Color camera type HS-CAM 6, working distance 100 mm, projection 55 mm Image processing system type TCAM3, fixed/flying crosshairs, via 12.1” screen, memory for 1000 tools Table support Ø 90 mm, throat depth max. 225 mmm, manual 360° rotation, tool holder SK50:SK40 (photo) Accessories: Power supply unit 12 V adapter 4x USB interfaces (label writer with power supply unit not connected) Tool holder SK50:HSK A63 *