Used 5 Axis Machining Centre for sale (99,020)

Condition: new, Year of construction: 2026, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 1,500 mm, Machine configuration ROTAMILL 2819 - NC Rotary table, Ø1.800 mm - NC Fork-type Milling Head M-SERIES (A- and C-axis) - Milling spindle CST-42-180-S - Tool chain magazine, 54 pockets, HSK-A(T)63 - Chip conveyor - NC Control HEIDENHAIN TNC 640 - Technology package turning - 2-fold head change magazine, fully automated - Preparation of the machine for wet machining - Oil mist extraction unit, approx. 3.000 m³/h - Workpiece measuring touch probe BLUM TC 60 - Tool measuring, BLUM LaserControl Single NT - Kinematic 3D-calibration software - Heidenhain - Kinematic tool kid - CAD-Import (.step; .iges; .dxf) - Remote diagnosis (Teleservice) - Operator and maintenance training (1 day) excl. travel cost and expenses - Loading and (seaworthy) packing charges, FCA Jülich as per Incoterms 2020 - Installation and run-off inside Germany incl. travel costs and expenses OPTIONAL - Coolant unit Technical data - Traverses X-axis = 2,800 mm - Traverses Y-axis = 1,900 mm - Traverses Z-axis = 1,500 mm - Portal clearance (roof)- width (Y) = 2,250 mm - Portal clearance - height (Z) = 1,465 mm - Total weight, approx. = 41,000 kg - Feed rate in X, Y and Z = 50 m/min - Acceleration in X, Y and Z = 4 m/s2 - Feed force in X, Y and Z = 10.000 N Rotary NC-Table Rotary table (C1-Axis) - Face plate, standard = Ø 1,800 mm - Interference diameter = Ø 2,200 mm - Payload – milling, max. = 6,000 kg Drive C1-Axis – turning table HT - Swivel range = 360° (endless) - Rotational speed, max. = 30 rpm - Torque, max. = 7,473 Nm - Clamping moment = 13,000 Nm Fork type NC-Milling-Head M-SERIES (A-Axis) Drive A-Axis - Swivel range = ±110° (60 rpm) - Speed, max. = 100 rpm - Feed rate, max. = 600°/s - Nominal moment = 840 Nm - Clamping moment = 4,000 Nm Drive C2-Axis - Swivel range = ±360° - Speed max. = 65 rpm - Feed range, max. = 390°/s - Nominal moment = 1,020 Nm - Clamping moment = 4,000 Nm Milling spindle CST-42-180 S - Power, S1 (S6-40% ED) = 42 (53) kW - Nominal moment = 2,000 rpm - Torque, S1 (S6-40% ED), max. = 201 (253) Nm - Speed, max. = 12,000 rpm - Motor type = synchron/8-pole - Tool holder = HSK-A63 - Clamping system = hydraulic - Clamping force = 20 kN - Installation dimension, stator = Ø 180 mm - Spindle nose, length = 110 mm Accuracies according to VDI / DGQ 3441 - P (X,Y,Z) = 0,012 mm - P (C, A) = 5" - Ps (X,Y,Z) = 0,008 mm - P (C, A) = 3" Tool chain magazine with double arm gripper - Tool pockets = 54 Giedpfstwatdsx Aaysu - Tool holder = HSK-A(T)63 - Pocket distances = 110 mm - Tool diameter, fully loaded = Ø 105 mm - Tool diameter, max. = Ø 150 mm - Tool length, max. = 300 mm - Tool weight, max. = 8 kg Footprint & Weight - Length (X) = 6,830 mm - Width (Y) = 6,970 mm - Height (Z) = 5,150 mm

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS profile machining center – 5-axis CNC, year of manufacture 2003, ready for immediate use TECHNICAL DETAILS X-axis travel: 6,650 mm Y-axis travel: 800 mm Z-axis travel: 500 mm X-axis feed rate: 0–40 m/min Giedpexr N Rmjfx Aayeu X-axis rapid traverse: 40 m/min Y- and Z-axis feed rate: 0–30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: 0–90° continuous C-axis rotation: 0–360° continuous B- and C-axis rotation speed: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Positioning accuracy over a 6,000 mm length: < ±0.15 mm MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling cutters: Ø 300 mm Maximum spindle motor power: 7 kW Disc milling cutter spindle motor power: 7 kW Spindle speed: 0–30,000 rpm Tool change time: < 15 s (clamp to clamp) Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 positions Total machine weight: 6.5 tons WORK AREA Number of clamping blocks: 8 units Clamping block positioning: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Year of construction: 2002, condition: excellent (used), FIDIA K197 CNC Machining Center ​in very good and working condition​.​ Gisdpfxoppwnqo Aayeu

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Heyligenstaedt Heynumill 2700-PF 3/5-axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Control: Heidenhain TNC 430 X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm Gedpfx Aeyaazmsayoiu In 2018, the Heynumill underwent a complete overhaul of the hydraulic system, replacement of all electrical cables, renewal of the spindle cooling unit, both longitudinal conveyors were replaced, and the milling heads were completely refurbished. The entire refurbishment cost €160,000. In 2020, the milling gearbox was renewed.

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,200 mm, 5-axis gantry machining center CYPORT CP 4030 HIGHLIGHTS • 5-axis simultaneous machining thanks to 2-axis fork-type milling head with direct drives • Powerful milling spindle with 12.000 min-1 • Large Working space with smallest footprint • HEIDENHAIN iTNC 530 • All-round access to the workspace Godpfx Aaoivn Euoyeiu • Tool magazine with 48 pockets Travels X/Y/Z: 4,000 / 3,000 / 1200 mm Gantry passage Y/Z: 3,280 / 1,400 mm Rapid Feed X/Y/Z 30/30/30 Feed Force X/Y/Z: 10.000N 2-axis-NC-swivel head M21 of German manufacturer Cytec: Swivel range A-axis : +/-110° Swivel range C-axis +/- 360° Powerful milling spindle of German manufacturer Cytec: Tool taper: HSK-A 100 Speed: 12,000 rpm Power: 27/32 kW (100%/40% DC) Torque: 201/253 Nm (100%/40% DC) Tool magazine: Number of pockets: 48 pcs. HSK-A 100 max. tool diameter: 105/130 mm max. tool length: 300 mm max. tool weight: 8 kg Control: HEIDENHAIN iTNC 530 5-axis path control Electronic hand wheel HR 410 Coolant system Tank volume: 800 L external coolant supply: 20 bar internal coolant supply: 50 bar Paper band filter Coolant-airblast-changeover for external Coolant Work piece measuring system: Touch probe M&H - radio controlled Working area coverage Documentation CE-certification NEW COMPONENTS Ball screws NEW All bearings NEW Recirculating roller units for linear guideways NEW Tool Changer NEW Counterbalance cylinder NEW Lubrication distributors NEW All pipes and cables NEW All hoses NEW Bellow-types way covers NEW PVC-Lamellae NEW Safety Bumper NEW Electrics components (switches, relays, contactors, etc.) NEW Safety glass panes NEW Paint coating NEW REBUILT COMPONENTS C-Axis A-Axis Motor milling spindle Drive motors Hydraulic unit Hydraulic valves Complete Pneumatic system * All wear parts in the sub-assemblies have been replaced by new parts. The condition of the components corresponds to the high quality standard of the exchange program. REFURBISHED COMPONENTS Machine table Z-Ram X- and U-Carriages Y-Carriages Y-Crossbeam Caterpillar energy chains Coolant unit Central lubrication system Sheet metal enclosure * All structural parts have been inspected, sand blasted, reground / scrapped, measured and thereafter repainted. The accuracy of the structural parts is identical to that of our new machines. MADE IN GERMANY

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 19,857 h, travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, number of slots in tool magazine: 72, TECHNICAL DETAILS Gijdpjx Sri Iofx Aayju X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Z-axis travel: 180 mm Milling unit power: 15 HP Tool change: automatic Number of tool positions: 3 x 24 slots EQUIPMENT Worktable with traverse Auxiliary unit for heavy parts Pneumatic clamps for door and window production Vacuum pump 250 m3/h Automatic lubrication Waste conveyor

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 800457, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,000 mm, distance between stands: 2,000 mm, controller model: Siemens 840D SL, The machine was completely overhauled in 2012. TECHNICAL DETAILS X-axis travel: 4,000 mm Y-axis travel: 3,400 mm Z-axis travel: 1,000 mm Column clearance: 2,000 mm Spindle power: 37 kW Speed range: 12–2,800 rpm Distance spindle to clamping surface: 280–1,280 mm Taper: ISO SK-50 Table size – longitudinal: 3,000 mm Table size – transverse: 1,500 mm Table load: 2 x 10 t C-axis swivel range: 0–360° (in 1° increments) A-axis swivel range: 90°–0°–90° (in 1° increments) MACHINE DETAILS CNC control: Siemens 840D SL Axes: 5 controlled Total power requirement: 70 kVA Giodpfxex Uwnbj Aayeu Dimensions & Weight Space requirement: approx. 10,200 mm x 7,200 mm x 5,925 mm Machine weight: approx. 82 t EQUIPMENT Automatic tool changer for 60 tools 1 universal milling head, 1,750 Nm Note: The machine has already been dismantled.

Condition: used, functionality: fully functional, Year of construction: 1997, 5-axis CNC tube bending machine BLM Dynamo - 0 Serial number: 605970300001 Year of construction: 1997 Voltage: 380V 50HZ Machine weight: 1500 kg Control system: DOC 85C BLM bar loader BLM CARM 7 Serial number: 340040102059 Year of construction: 2004 Weight: 405 kg Without conveyor belt Giedpfxet R Tgie Aayou Without protective grid TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2400 bends/h Bending capacity round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Bar feeder: BLM Carm 7 (year of manufacture: 2004) Positioning speed X-axis: 2000 mm/s Bending speed H/Z Y-axis: 500 °/s Turning speed Z-axis: 900 °/s Turning speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T axis: ± 0.1 mm Measuring tolerance Y/Z/Q axis: ± 0.1° Maximum range at maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - 0/180/0° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Control system: DOC 85C Ex location Dortmund, free truck loading

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Gedpfx Aov Iq Ezeaysiu Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Hurco VMX50i (2014) 3-Axis Vertical Machining Centre Godpfxjyx H Rto Aayeiu Control: Hurco WinMax Travels & Capacity X Axis Travel: 1270 mm Y Axis Travel: 660 mm Z Axis Travel: 610 mm Table Size: 1500 x 660 mm Max Table Load: 2000 kg

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm 2800kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Giodpsyvqdfofx Aayeu Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1091950, SPECIFICATION Travel X axis stroke 1626mm Y axis stroke 813mm Godpfxot Dmmve Aaysiu Z axis stroke 762mm Spindle nose to table (max) 889mm Spindle nose to table (min) 127mm Table Length 1626mm Width 711mm T Slot width 16mm T Slot centre distance 125mm Number of Std T slots 5 Max. Weight on table 1814kg Spindle Maximum rating 22.4kW Maximum speed 7500rpm Maximum torque 610Nm at 500rpm Drive system 2 speed geared head Taper BT50 Bearing lubrication Air/Oil injection Cooling Liquid cooled Feedrate Rapids on X 13.7m/min Rapids Y 15.2m/min Rapids on Z 15.2m/min Max. Cutting feedrate 12.7m/min Axis Motor Max. thrust X 24910N Max. thrust Y 24910N Max. thrust Z 24910N Toolchanger Capacity 30 Maximum tool diameter (adjacent empty) 254mm Maximum tool diameter (full) 102mm Maximum tool length (from gage line 406mm Maximum tool weight 13.6kg Tool to tool (avg) 4.2 sec Chip-to-chip (avg) 6.3 sec General Air required 113l/min, 6.9 bar Weight 10,206Kg MACHINE EQUIPPED WITH:- Through spindle coolant Swarf auger Rigid tapping Hard drive Lighting Enclosed Guarding

Condition: used, Year of construction: 2001, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,800 mm, controller manufacturer: Fanuc, overall weight: 75,000 kg, table length: 1,000 mm, table width: 1,000 mm, controller model: 160i-M, table load: 2,000 kg, CNC Precision Horizontal 5-axis Machining Centre CNC Control: Fanuc 160i-MA Table size 1000 x 1000 mm Table load 2000 kg Giodpfxjy Nz Rve Aayou Number of pallets 5 Max. workpiece diameter x height 1400x1200 mm Movement X-Y-Z-Axis: 1800 mm A-Axis (table tilt) +20 / -110 B-Axis travel 360° Spindle taper DIN 69871/50A Spindle speed 10.000 R/Min Tool store capacity 240 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2003, travel distance X-axis: 13,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 30,000 rpm, distance between stands: 6,500 mm, spindle nose: HSK A63, X-axis: 13.000 mm Y-axis: 4.500 mm Z-axis: 1.000 mm Distance between columns: 6.500 mm C-axis: 190º A-axis: 110º Positioning speed XYZ: 15.000 mm/min. Gijdpfett I Sfsx Aayeu Positioning speed AC: 10 tpm CNC Controller: Siemens 840D Spindle nose: HSK A63 Spindle speed: 30.000 rpm Spindle power: 20 kW Toolchanger: 20 Pockets Torrestool tables: 16x X-axis: 11.500 mm Y-axis: 3.500 mm Z-axis: 750 mm Country of origin: Spain Machine size LxWxH: 19.000 x 11.000 x 6770 mm Machine weight: 70.000 kg The Torresmill Gantry is a 5-axis CNC milling and drilling machine, specially designed to work on aeronautical materials (Composite, Aluminum, Titanium, Steel, ...). The Torresmill gantry is perfectly combined with the Torrestool universal clamping device, guaranteeing flexibility and process time.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, operating hours: 55,569 h, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, number of slots in tool magazine: 126, controller model: Fanuc 16 MC Professional 3, spindle speed (max.): 20,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 560 mm Travel in Y-axis: 560 mm Travel in Z-axis: 560 mm Spindle speed: 20,000 rpm Torque: max. 167 Nm Tool interface: HSK-A63 DIN 69893 Tool magazine: 126 positions Tool change time: 1 s Max. tool diameter: 80 mm Max. tool length: 300 mm Distance from spindle nose to table: 150 - 710 mm Distance from table top to spindle center: 80 - 640 mm Pallet size: 400 x 400 mm Pallet load: 400 kg Pallet change time: 7 s Rotary table indexing: 1° Table rotation speed: 5000 rpm Spindle drive: 22 kW Feed rate: max. 40,000 mm/min Rapid traverse rate: 40,000 mm/min MACHINE DETAILS Control system: Fanuc 16 MC Professional 3 Giedpfxjzb Ewpj Aayou Total power consumption: 64 kW Dimensions & Weight Footprint: approx. 9.0 x 3.0 x 2.8 m Machine weight: approx. 15 t Operating hours Spindle hours: 55,569 h Program runtime: 66,600 h Power-on time: 163,411 h

Condition: used, Year of construction: 2019, functionality: limited functionality, machine/vehicle number: 1000033397, Pre-owned Primus 402 Waterjet 5 Axis with one cutting head, has served us for 4 years cutting stone and ceramic benchtops, delivers great cutting capabilities across a wide range of materials, including stone, ceramic, metals, glass, and more. Key Features: - Pioneer Technology: Maximum programming flexibility thanks to the free movement of the cutting head. The 5-axis cutting head is fitted with the patented Intermac infinite rotating C axis system for making top-quality tilted cuts (+/-60°) on complex profiles, with no limits. - Versatile Performance: Primus offers the possibility to process a wide selection of materials such as: natural stone, sintered materials, ceramic, metal, glass, and more. - User-Friendly Interface: Equipped with iCam Software making it easy to program and operate, even for intricate projects. Condition: - The machine was installed in September 2019 and decommissioned in September 2023. It was running well at the time of decommissioning, with only inaccuracy when cutting circles. Some maintenance may be required to restore it to peak performance, but it remains in good working condition and ready for immediate use in your factory. - The machine’s Probe and Head Rotation Calibration devices may need maintenance or replacement. These features were not critical to our operations and, therefore, were never used. - Decommissioning was carried out by a highly respected and professional Machine Technician in New Zealand, who can also commission the machine installation at your facility. Contact details can be provided upon request. - EXW from Auckland, New Zealand. Gisdpfeytlb Sex Aayou This is a fantastic opportunity to own a high-performing waterjet at a fraction of the cost of a new model. Contact us today to learn more.

Condition: ready for operation (used), Year of construction: 2013, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1050 mm Y-AXIS TRAVEL: 540 mm Z-AXIS TRAVEL: 560 mm DISTANCE SPINDLE NOSE-TABLE: 75-635 mm DISTANCE COLUMN-SPINDLE AXIS: 550 mm RAPID FEEDS X-Y-Z: 44 - 44 - 25 m/min SPINDLE: 11000 rpm; 26 kW; ISO 40 TABLE SIZE: 950 x 480 mm MAX ADMITTED LOAD: 1300 Kg HIGH PRESSURE COOLANT: INCLUDED TOOL MAGAZINE: BASKET-TYPE ; 28 POS MAX TOOL DIAMETER: 65 (130) mm MAX TOOL LENGHT: 250 mm MAX TOOL WEIGHT: 7 Kg Gsdpfxjzda Hqs Aayeiu CONTROL UNIT: FANUC 0-iMD WEIGHT: 6900 Kg OVERALL DIMENSIONS: 3366 x 2238 x 3130 mm ACCESSORIES: SWARF CONVEYOR ; MECHANICAL TOOL SETTER ; PORTABLE HANDWHEEL

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: Giedezc Sk Ejpfx Aayju Working area X: 3,400 mm Working area Y: 1,287 mm Working area Z: 180 mm Number of milling spindles: 1 Main motor: 15 kW Speed max: 24,000 rpm 4th axis Tool clamping system: HSK-F63 Tool changer positions: 18 Vertical drilling spindles: 18 Horizontal drilling spindles X: 6 Horizontal drilling spindles Y: 2 Nut saw in X direction Design: Cantilever machine Machine table: Console table Number of consoles: 6 Positioning aid: Dot laser Number of vacuum pumps: 1 Capacity of vacuum pumps: 140 m³/h Safety device: Foot mat Control system: BECKHOFF CONTROL Software: HOLZ-HER CAMPUS V6.4 Conformity marking: CE marking Weight: approx. 3,840 kg Space requirement length: 6.7 m Space requirement width: 4 m Availability: Short notice, by arrangement.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10489 Manufacturer: DMG Type: DMC 60 U duoBLOCK Year of construction: 2011 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 11XX000XX01XX Major overhaul: 2025 X-Travel: 600 mm Y-Travel: 700 mm Z-Travel: 600 mm B-Axis: -30 - 180 ° C-Axis: 0,00 ° Spindle Taper: HSK A63 DIN 69893 Max. Workpiece Weight: 600 kg Max. rotary table diameter: 630 O Table speed range: 40 min/-1 Tool Piece Magazine With: 60 Pcs./pcs. Turning Speed Range - Stepless: 20 - 18.000 RPM Max. Torque: 121 / 82 Nm Feed force (X / Y / Z): 10 kN Rapid Travel X/Y/Z: 60.000 mm / min Drive Capacity - Spindle Motor: 28 / 19 kW acceleration: 6 m/s² Total Power Requirement: 55 kW Weight Of The Machine Ca.: 12 t Dimensions Of The Machine Ca.: 7,0 x 5,0 x 3,2 m Numbers Of Pallets: 2 Size Of Pallet: 630 x 630 mm Tool change time: 3,7 s Gisdpfsycpxgjx Aayju Further information: DMG DMC 60 U – 5-Axis Universal Machining Center (Year 2011) The machine is currently still in production and has been used exclusively for aluminum machining in single-shift operation. It is equipped with a pallet changer and a high-pressure cooling system (30 bar). In 2024, extensive maintenance and refurbishment work was carried out: ✅ All axes (except the Z-axis) were renewed ✅ Guideways were replaced ✅ Spindle was overhauled Maintenance and service reports, as well as all relevant documentation, are fully available. More technical Specifications: 🔹 Working ranges: Distance spindle center – table (horizontal): 20 – 620 mm Distance spindle center – table (vertical): 120 – 720 mm Distance spindle nose – table (horizontal): -150 – 550 mm Distance spindle nose – table (vertical): -250 – 450 mm Features & Accessories ✅ Complete documentation available ✅ Chip conveyor for efficient chip removal ✅ Cooling system with high-pressure cooling (30 bar) ✅ Internal coolant supply for optimal machining ✅ Pallet changer for uninterrupted operation ✅ Rotating sight glass for clear process visibility ✅ Renishaw OMP 60 probe for precise workpiece measurement ✅ Electronic handwheel for easy manual control ✅ Oil mist extraction for a clean working environment ✅ Paper band filter for effective coolant filtration ✅ Spindle oil cooler for temperature stabilization The machine can be inspected and tested under production conditions by appointment. 📍 Availability: Upon agreement

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC-Steuerung Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Godpszc Dy Eefx Aayjiu Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Gedpfxev N Di Ae Aayoiu Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Number of controlled axes: 4, digital Axis X travel (longitudinal): 6500 mm Axis Y travel (transversal): 1095 mm Axis Z travel (vertical): 800 mm Axis A rotation (vertical rotation): 0° to 180°, continuous Maximum axis X speed: 80 m/min Godpfxszczwus Aayeiu Maximum axis Y, Z speed: 64 m/min Maximum axis A speed: 10,000 °/min Electric spindle power in S1: 7.5 kW, 20,000 Maximum electric spindle speed with standard HSK-F Configurable, independent work areas on the axis 9-position tool changer Jaw positioning Number of standard stops: 4

Condition: excellent (used), 3-axis machining center Gsdpfozcpfaox Aaysiu Work area: 1350 x 2565 mm.

Condition: used, machine/vehicle number: 008527, X axis working area: 6000 mm Gisdpfsy Nx Ufex Aayou Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Total number of drilling spindles: 21 Total number of tool changer positions: 77

Condition: used, machine/vehicle number: 008169, X axis working area: 4500 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 22 Gijdpfoxaud Iex Aaysu