Used 5 Axis Machining Centre for sale (100,234)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,400 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (max.): 24,000 rpm, distance between stands: 4,000 mm, Technical Specifications • Table clamping area: 6,000 × 3,000 mm • X-axis (longitudinal travel): 6,000 mm • Y-axis (cross travel): 3,200 mm • Z-axis (vertical travel): 1,400 mm • Distance between columns: 4,000 mm • Feed speed: 30,000 mm/min • Table load: 4,000 kg/m² • Max. spindle speed: 24,000 rpm • Max. spindle power (S1-100%): 42 kW • Max. spindle torque (S1-100%): 67 Nm • Tool holder: HSK63A • Tool changer: 24 positions • C-axis: ±360° • A-axis: +95° / -110° Knsdpjxlip Asfx Abzjb

Year of construction: 2003, condition: good (used), functionality: fully functional, number of axes: 5, DS Technologie Scharmann ECOSPEED 2600/7800 5-axis high-performance machining center The machine was specifically designed for the highly dynamic machining of large-format aluminum structural components and operates with the parallel kinematic Sprint-Z3 machining head. The machine concept combines two conventional linear axes with the three-axis parallel kinematic head to enable simultaneous 5-axis machining. Manufacturer: DS Technologie Werkzeugmaschinenbau GmbH Kjdpfszwhunsx Abzjnb Product line: Scharmann Machine type: ECOSPEED 2600/7800 Year of manufacture: 2003 Axes: 5 Machining head: Sprint Z3 Machining head kinematics: Parallel kinematics Motor spindle: 75 kW Spindle torque: 72 Nm Maximum spindle speed: 24,000 rpm Tool holder: HSK-A63 Maximum tool weight: 10 kg Maximum bending moment of tool: 350 Nm Tool balancing quality: G 6.3 Tool clamping: Hydraulic Hydraulic pressure for tool clamping: 120 bar Volume flow for tool clamping: 6.6 l/min Power of hydraulic unit for tool clamping: 1.5 kW Typical application: Structural components for the aerospace industry Mains connection: 3 AC 400 V Mains frequency: 50 Hz Nominal current main machine: 500 A Control system: Siemens SINUMERIK 840 D Tool magazine: Automatic tool magazine Tool change: Automatic Workpiece handling: Integrated large-format workpiece and transport system Machine design: Fully enclosed large machine Chip removal: Integrated Hydraulic unit: Knoll Hydraulik Systeme Operation: Stationary Siemens control panel with additional handheld device The Sprint-Z3 head has three parallel linear drives and enables translational and two rotational movements via the coupled movement of the parallel mechanism. Together with the two linear axes of the machine, the 5-axis kinematics of the ECOSPEED are created. We will be happy to provide further information, videos or drawings upon request.

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 712 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 515 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Siemens und Heidenhain, workpiece height (max.): 400 mm, workpiece diameter (max.): 540 mm, workpiece weight (max.): 200 kg, total height: 3,360 mm, total length: 4,040 mm, total width: 2,770 mm, table load: 200 kg, rotary table diameter: 410 mm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, tool length: 280 mm, tool diameter: 76 mm, tool weight: 7,000 g, Equipment: chip conveyor, documentation/manual, Machine available with Siemens 828D Technical data 5-SIDE MACHINING • B/C-axis encoder • B-axis +30° to -120° • C-axis 360° • Media preparation table Ksdpezlhvhjfx Abzonb TOOL MAGAZINE CAPACITY • 60-position magazine (chain) • Tool diameter 76 mm • Tool length 280 mm • Tool weight 7 kg LARGE MACHINING AREA • Travel X: 712 Y: 540 Z: 515 • Swivel diameter 540 mm • Workpiece weight 200 kg • Workpiece size ⌀540 mm x 400 mm USER-FRIENDLY DESIGN • Large work area doors • Short distance to the spindle • Good access to the machining area and tool magazine EQUIPMENT • CNC control Siemens 828D (15") or Heidenhain TNC 640 • MPG handwheel • 60-position tool magazine • 12,000 min⁻¹ (taper #40), coupling • Spindle cooler • Air blow-through through the spindle • 20 bar coolant supply • CAN filter for chip flushing/ring cooling • Automatic central lubrication system • Media preparation table (6 connections) • Glass scales X, Y and Z axis • Chip conveyor • Direct path measuring system C/B axis • Deublin rotary union • CE specification

Condition: used, DMG HSC 55 linear is a 5-axis machining center with high precision, superior accuracy and reliability. Travels X450 mm, Y650 mm, Z460 mm; A -10/+110°; tool magazine 120 places; tool Ø 80 mm; tool length 250 mm; max tool weight 6 kg; spindle taper HSK63. Spindle 2–28000 t/min, spindle power 38/28 kW; 50Hz 3x400 V; total installed power 70 kVA; machine weight ≈9500 kg; overall dims L3210×W2930×H2900 mm. Delivers tight tolerances; typical for automotive, aerospace, medical, watchmaking and machine-tool manufacture. Knjdpfx Abezv Nh Tjzob

Condition: used, HEDELIUS RS 60 MAGNUM-2000 is a 5-axis machining center engineered for precision, high accuracy and reliable performance. Working capacities: table 1,200 x 600 mm (Ø 680 mm), table load max 300 kg; travels X 2 mm, Y 620 mm, Z 520 mm, swivel A +15 / -95°. Main specs: spindle nose SK40, speed 50–12 rpm, torque 121 Nm; feed 0–45 mm/min, rapid 45 m/min, max feed force 7 N; supply 3x400 V 50 Hz, total power 25 kVA; machine weight ≈11 kg, dimensions 5,400 x 4,300 x 3 mm; tool change 3 s, tool Ø max 80 mm, length 330 mm, weight 8 kg. Equipment: 56-place tool magazine, 1,250 l coolant, 80 bar high-pressure coolant, Renishaw probe, chip conveyor, oil-mist extractor, switch-cabinet AC, full enclosure. Delivers tight tolerances; suited to automotive, aerospace, medical, watchmaking and machine-building. Ksdpfezv Nhtsx Abzenb

Condition: used, Year of construction: 2010, Technical details: Knjdpfxoytcf Us Abzob x-travel: 800 mm y-travel: 685 mm z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 10.500 - 20.000 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Total power requirement: 37 kW dimension machine approx.LxWxH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m 5 - axis machining center CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. *

Condition: used, Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 510 mm, total height: 3,250 mm, total length: 3,545 mm, total width: 3,970 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, Equipment: chip conveyor, For sale is a high-precision Hurco VTXU vertical 5-axis machining center with a swivel rotary table. The machine is in very good cosmetic condition. Technical data: Year of manufacture: July 2008 Control: WinMax (dual-screen) Travel distances X / Y / Z: 800 x 700 x 510 mm Swivel range A-axis (tilting axis): -30° to +110° Rotation range C-axis (rotary table): 360° (full range) Rotary table diameter: 610 mm Table load: max. 400 kg Distance spindle nose - table: 150 - 660 mm Max. spindle speed: 12,000 rpm Spindle power: 18 kW Torque: 237 Nm Tool holder: SK 40 Magazine capacity: 48 tools Max. tool length: 280 mm Max. tool weight: 7 kg Tool change time chip-to-chip: 8 sec. Kjdszvd U Ujpfx Abzsnb Voltage: 400 V / 50 Hz Connected load: 55 kVA Compressed air requirement: 6 - 8 bar Machine dimensions (W x D x H): 3,545 x 3,970 x 3,250 mm Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, controller model: MAX 5, workpiece weight (max.): 11,000 kg, table width: 1,700 mm, table length: 3,000 mm, table load: 11,000 kg, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, We are offering the following machine directly on behalf of the owner. It was delivered in 2026, but due to a change in requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance spindle nose–table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Knsdjzl Hbcjpfx Abzjb Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000 block look-ahead) - STEP and DXF import - Automatic pocket and island recognition - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 18,000 rpm, table load: 11,000 kg, workpiece weight (max.): 11,000 kg, rotational speed (max.): 18,000 rpm, controller model: MAX 5, coolant supply: 40 bar, We offer the following machine directly on behalf of the owner. It was delivered in 2026 but, due to changing requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° Knodpfx Aozu Nz Dsbzeb TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance between spindle nose and table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle, 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000-line look-ahead) - STEP and DXF import - Automatic pocket and island detection - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, About Us Since 2014, we have been developing and manufacturing our machines in Austria as a machine manufacturer. In addition to our standard machines, which can be individually customized, we are also able to offer special solutions. We would be happy to send you our product catalog; simply contact us. HSC 544HP Machining Center 3rd Generation Key Data - 500x400x330mm travel range Knsdpfxjzu Ikwe Abzeb - BT30 spindle with 20,000 rpm and 10.5 Nm (other spindle types available) - 18-tool magazine - Feed rate up to 25 m/min - Compact dimensions of W 1,460 x D 1,470 x H 2,110 mm and a weight of approximately 2,200 kg The machines are configured and assembled according to customer specifications. Depending on the requirements, numerous options are available, such as different spindle types up to 60,000 rpm, different cooling systems, direct path measuring system, integrated automation, etc. Control System - CS-Lab / AMT - Clear and customizable user interface and easy operation via touchscreen - S-curve acceleration for dynamic axis movement while maintaining high accuracy - Integration of, for example, robots, pallet changers, workpiece changers, etc. is possible Machine Frame - Solid machine frame made of mineral casting, optimized by means of FEM simulations - Very high vibration damping, stiffness, and ideal thermal behavior - Use of roller guides instead of conventional ball guides for maximum stiffness - High-speed ball screws with reduced heat generation Drive System - AC servo drives, well-matched to the axes, for high contour accuracy - Directly driven and backlash-free ball screws Overview of Spindle Types 60,000 rpm I 0.3 Nm 40,000 rpm I 0.9 Nm 36,000 rpm I 2.4 Nm 30,000 rpm I 3.5 Nm 30,000 rpm I 6.0 Nm 20,000 rpm I 10.5 Nm We would be happy to provide you with expert and comprehensive advice in order to offer you the perfect solution for your machining task.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Control system: Siemens 840D-SL Tool positions: 160 Tool holder: HSK 63 Spindle speed: 10,000 rpm / 242 Nm Pallet size: 630 x 500 mm Number of pallets: 2 Ksdjzrl Dpopfx Abzonb X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm Table load capacity: max. 1000 kg

Condition: used, Year of construction: 2021, CNC machining center with a fixed worktable, double-sided driven gantry, and a 5-axis milling spindle with continuous interpolation. Machine for processing solid wood, wood-based materials, and various plastics. Base machine and gantry Machine base and gantry made of a ribbed, welded steel construction, offering very high rigidity. Kjdpfx Abszux H Ajzonb Guidance system and drives Gantry movement of the X and Y axes with rack and pinion and servo drive. DUAL GANTRY MOTORIZATION: Drive of the X-axis with two synchronized servo drive motors. Movement of the Z-axis via ball screw with servo drive. Dust-protected linear guide. Safety system Three-part safety floor mats allow for the placement of workpieces in the non-active area. Moving partial enclosure with a Lexan protective window for the machining units. Central lubrication Automatic central lubrication Vacuum system Vacuum system for pendulum machining with constant suction power in both work areas. Machine operation The machine is equipped with a cable-guided remote control for performing basic functions. Electrical equipment Dust-protected control cabinet (CE) according to IP 55 standard, including an air conditioning unit and a mobile control panel. Machine control OSAI Open Numerical Control 5-axis swivel head Z 700 Movement of the C-axis and B-axis via brushless servo drives - Maximum rotational speed: 750 /2 sec. - Rotation C-axis: Swivel axis: +/- 110 Technical data - max. travel speed X-axis: 60 m/min - max. travel speed Y-axis: 60 m/min - max. travel speed Z-axis: 24 m/min - Vector speed: 80 m/min - max. workpiece height: 500 mm - Machining area: 4210 x 1605 mm (Extended working area) - Compressed air supply: 7 bar - Suction power: min. 2200 m3/h - Suction speed: min. 28 m/s - Suction nozzle: 160 mm Work table Comec Designed Phenolic resin table, designed as a grid table, grid dimension 50 x 50 mm, for accommodating Cosmec suction systems and templates. The work table is divided into two work areas. Threaded holes in the table to mechanically fix workpieces, 3 pcs. retractable stops Vacuum pump Vacuum pump 250/300 m3/h (50/60 Hz), power: 5.5 kW Main spindle 5-axis spindle: 18 kW main spindle, liquid cooling, tool interface HSK 63 F - 15 kW in S1 operation - 18 kW in S6 operation - Ceramic bearings - Direction of rotation: left/right - Spindle speed: 500 - 24000 rpm Extraction hood Extraction hood controlled via NC program, adjustable in height. 2 x Tool changer Moving 12-position tool changer for tool interface HSK 63 F - max. tool diameter 150 mm, if adjacent position is free - max. tool diameter 120 mm, if adjacent position is occupied - max. tool weight: 6 kg - max. weight of tool and holder: 40 kg Tool length measurement Station for automatic length measurement of the tool Note: Current status of the 5-axis simultaneous machining software through a maintenance contract.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, X-axis: 650 mm Y-axis: 325 mm Z-axis: 350 mm B-axis: 130 degrees C-axis: 360 degrees Spindle speed: 30,000 rpm Spindle interface: HSK 50 Tool changer: 60 positions Control system: Makino Professional 5 Includes hybrid length measuring system Includes measuring probe Includes approximately 60 HSK 50 tool holders (MST + Rego Fix) Spindle has been replaced Knsdpfx Abezapp Hjzob Ball screws for X and Y axes replaced in 2024 Machine currently has approximately 32,000 spindle hours and is still in active production Available from approximately week 46/2026 An inspection with the machine powered on can be arranged at any time.

Condition: excellent (used), Year of construction: 2006, X-axis: 1,350 mm Y-axis: 1,150 mm Z-axis: 895 mm A-axis: +16 to -120 degrees Rotary table: Diameter 1,100 x 1,000 mm Max. workpiece size: 1,000 x 1,000 x 500 mm Max. table load: 1,600 kg Tool interface: HSK-A63 Kodpfxszclk Ss Abzenb Tool changer: 46 positions Spindle speed: 24,000 rpm Control system: Heidenhain ITNC 530 Space requirement (including door clearance): 5,605 x 4,290 x 3,159 mm Weight: 12,500 kg Includes coolant system, 40 bar Includes documentation

Year of construction: 2003, condition: used, A Deckel Maho 5-axis CNC milling machine in need of repair is offered. Travel X/Y/Z: 1080mm/710mm/710mm, NC-mounted rotary table C-axis X/Y: 800mm/620mm, swiveling milling head B-axis: 90°, max. spindle speed: 12000rpm, tool taper: SK40, tool positions: 32, control: Heidenhain iTNC 530, control-on hours: 75100h, program run hours: 24720h. Equipped with internal air blast supply, external coolant supply, Heidenhain infrared touch probe, Heidenhain electronic handwheel, Rotoclear rotating inspection window, chip conveyor, oil mist extraction system, coolant system with paper band filter, chip flushing gun, work area light and clamping support next to the mounted rotary table for longer workpieces. The milling head clamping system is leaking, but the machine is still operational. An on-site inspection is possible. Ksdpozwfq Hsfx Abzjnb

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: Brother C00, _____ Description: Year of manuf. : 2022 Control : Sonstige Brother C00 Speed : 10000 rpm Movement X/Y/Z : 700/400/300 mm Tool holder : BBT 30 Mainspindle: Technology:Directdrive Speed:10.000 rpm Power (max.):26,2 kW Torque (max.):92 Nm Taper:BBT 30 Kodpfx Asylrn Aebzenb Workingtable: Clampingsurface:800 x 400 mm Tableloading (max.):250 kg In general: Toolmagazine:21 Stations Rapid travers in X/Y/Z:50/50/56 m/min Equipment/Accessory: Chipmanagement:Chip coveyor Coolingmanagement:Minimumlubrication (IKZ), Company Lubrix V5 4.-Axis:Lehmann EA-510 with Counterbearing Workpiececlamping:Hydrulic, 80-210 bar Contactcontrol:Pneumatic Automationinterface I:Automatic Door (electrical) Automationinterface I:Robotinterface Oilmistseparation:Mechanical extraction, company Sara UC1 SD Columnextention:150 mm Setup operations:Electronic Handwheel Further Equipment:Trafo

Condition: used, Year of construction: 2012, total height: 4,500 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 50,000 kg, Machine No.: 11720001123 Control Heidenhain iTNC 530 HSCI (3D path control) Travel Paths X: 1,850 mm Y: 2,100 mm Z: 1,250 mm B-axis: controlled universal swivel milling head C-axis: NC rotary table Ø 1,700 mm 5-axis simultaneous machining Spindle Motor spindle SK50 Speed: 20–12,000 min⁻¹ Ksdpfszv A Aksx Abzonb Power: 44 kW (40% duty cycle) / 32 kW (100% duty cycle) Torque: 288 / 187 Nm Tool holder: SK50 according to DIN 69871 Tool Changer 60-fold chain magazine Double gripper Equipment IKZ 40 bar Chip conveyor Tool measurement system Blum Laser NT Hybrid Heidenhain TS 640 infrared probe Electronic handwheel Minimum quantity lubrication (MQL) Oil/emulsion mist separator Coolant through spindle Coolant tank 980 l Rotating viewing window 3D quickSET Machine Protection Control (MPC) Adaptive Feed Control (AFC) ATC (Application Tuning Cycle) DMG MORI NetService DMG MORI SMARTkey Documentation and electrical schematic (German) Travel X-axis: 1850 - mm Dimensions (LxWxH) approx.: 8000 x 6000 x 4500 mm Travel Y-axis: 2100 - mm Weight approx.: 50,000 kg Travel Z-axis: 1250 - mm Year of construction: 2,012 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Year of construction: 2012, condition: used, Empty weight: 8.500 kg Carrying capacity: 200 kg GVW: 8.700 kg Length: 30 cm Lifting capacity: 200 kg Serial number: 162 Machining center comprising: Kedpfszvcckex Abzonb - A 2012 OKK VC-X350 CNC lathe - A Fanuc M-20iA robotic tool changer Technical specifications: - Axis travel: - X: 600 mm - Y: 430 mm - Z: 460 mm - A: -120° to +30° - C: 360° - Table-to-spindle nose distance: 70 mm – 530 mm - Table working surface: 350 mm - Table load capacity: 200 kg - Feed rate: - X/Y: 50 m/min - Z: 36 m/min - Cutting feed (X/Y/Z): 36 m/min - Spindle: - Power: 50/30 HP - Spindle speed: 12,000 rpm - Taper type: BT40 - Tools: - Number of standard tools: 120 - Maximum tool weight: 7 kg - Maximum tool length: 300 mm - Maximum tool diameter: 82 mm / 125 mm without adjacent tool - Tool-to-tool change time: approximately 1.3 seconds - Machine weight: 8,500 kg - Approximate dimensions: L 1,895 mm x W 3,440 mm x H 3,000 mm - Machine controller: FANUC F31i-A5 Hours on the clock: approximately 5,540 h Sold with workbenches and cabinets, including contents Online auction held following the closure of the "Supadis" production facility in Le Plessis-Pâté (91), a company specializing in precision machining. This sale includes more than 100 lots, notably several 3-, 4-, and 5-axis CNC machining centers from “Matsuura,” “OKK,” “Biglia,” and “Nakamura Tome,” as well as a “Kasto Functional A” automatic saw. The lot also includes grinding machines, a “Cincinnati” column drill press, “Trimos” and “Mitutoyo” measuring columns, as well as numerous tools, workbenches, and inspection equipment. The sale also includes stocks of raw materials (steel, aluminum, titanium, “Inconel,” “PEEK,” copper, etc.), workshop equipment, compressors, shelving, and various material-handling equipment. Sale organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Thursday 24 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 22 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Controller FANUC MXP-200FC Table size D380 mm Table load max 200 kg X travel 700 mm Y travel 520 mm Z travel 480 mm A axis +30/-120 degree C axis 0-360 degree Spindle speed 12000 rpm Tool holder type BBT40 Rapid speed 36/36/24 m/min Feedrate 1 - 100000 mm/min Max tool diameter and length D78 x 280 mm Max tool weight 6 kgs Spindle power 22,5 kW ATC magazin 30-fold Power required 46 kVA Accessories, features - CTS Kedpsr I Az Tjfx Abzonb - integrated 4/5 axis - Coolant unit - Chip conveyor - Mist collector - external hydraulic - manuals The machine is still under power and can be inspected in function. Ready to buy.

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, Controller HAAS Table size D500 mm Table load 300 kgs X travel 762 mm Y travel 508 mm Z travel 508 mm Knsdpfx Abexva Ahszjb B swivel +120 - 35 degree C rotation 0,001 - 360 degree Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Max torque 122.0 Nm at 2000 rpm Spindle power 22,4 kW Spindle drive system Inline Direct-Drive Tool holder SK40 ATC magazin 30+1-fold Max. tool dia (next to each other) D64 mm Max. tool dia (neighboard places empty) D127 mm Max. tool length 305 mm Max. tool weight 5.4 kgs Weight 6500 kgs Dimensions LxWxH = 4420 x 2340 x 2540 mm Features, accessories - Coolant unit - High pressure pump (CTS) - Chip conveyor - RENISHAW tool presetter - RENISHAW zero point presetter - Manuals The machine is still in production in Hungary and can be inspected in operation. It was purchsed as new. Ready to buy immediately.

Condition: good (used), Year of construction: 2018, Technical details are shown on picture. Kodpszrniusfx Abzonb Machine is in good condition. Parts shown by hand not come.

Condition: new, Year of construction: 2026, machine/vehicle number: N2097535010017, Basic machine G350 access-SERIE - FACTORY | NEW MACHINE - Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 770.0 mm Travel path of the Z-axis 805.0 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector 800 m³, filter class ISO ePM1 80% Stainless-steel internal work area enclosure HEIDENHAIN TNC 640 with GROB4Pilot access Control panel at tool loading and unloading position Tilting table unit (A'-axis) Rotary table with T- slots (B‘- axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication Compact double disk-type magazine HSK-A 63 with 90 tool pockets Tool cleaning device Electromechanical tool breakage detection device Scraper conveyor , discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) machine cooling unit with air- cooled cooling unit (4 kW) Kodpfx Abeqqi Dkszjnb Compressed air feed through spindle center Air gun at the work area Flush gun at the work area Flushing unit (Z- axis) Compressed air cleaner bar for safety screen in work area door Rotary distributor in B'-axis rotary table with hose installation Remote machine diagnostics with access control switch 12 month warranty

Year of construction: 2018, condition: ready for operation (used), Rotation axis: 360°, max. rotational speed: 60.000/min, including accessories and documentation. Kjdpfxeihp Ipj Abzonb

Condition: ready for operation (used), Year of construction: 2019, X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible. Kodozavyfspfx Abzonb

Condition: ready for operation (used), Year of construction: 1999, Offered is a travelling column machining center: rotary table: 1500mm, travels X/Y/Z: 1600mm/800mm/800mm, tool holder: SK50, spindle drive: 60kW, speed range: 20 to 6000rpm, tool changer: 30 positions, machine weight approx. 19200kg, machine dimensions X/Y/Z approx. 6000mm/4000mm/3200mm. Incl.: internal coolant supply, chip conveyor, chip flushing system, approx. 60 pieces SK50 tool holders, 3-jaw chuck. Inspection possible by arrangement. Kjdpfxjylbqyj Abzenb