Used 4 Sided Moulder for sale (67,800)

Year of construction: 1996, condition: reconditioned (used), machine/vehicle number: 16319, Max. machining dimensions: 220 x 120 mm (max. rough timber dimensions: 230 x 130 mm) Min. machining dimensions: 15 x 6 mm, automatic positioning system "Hecht-Posiomat", feed rate: 6 - 22 m/min., feed roller pressure: 6 bar, spindle diameter D = 40 mm, max. chip removal: 10 mm feed table: 2,000 mm, feed motor: 2.2 kW, Itjdpfx Aoh Euvmsbnek height adjustment: 0.37 kW, surfacing spindle: 4 kW, jointing spindle: 4 kW, left profiling spindle: 4 kW, thicknessing spindle: 5.5 kW, glass bead separation, location: Seevetal, sold "as is" and as inspected, subject to prior sale, excluding freight and packaging.

Condition: excellent (used), Year of construction: 1994, 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm. Iodpfel Dw Nxsx Abnjtk

Condition: used, Year of construction: 1999, Used 4-sided planing machine Iodpfx Abjzuzdqenotk Manufacturer: WEINIG Type: Unimat 23 E Year of manufacture: 1999 with infeed unit EM11 Year of manufacture: 1999 Technical data: 5 spindles (bottom, right, left, top, bottom) Total connected load min. / max. 42 kW - 126 kW Air flow rate 30 - 32 m³ / MIN Air flow rate per spindle 28 - 32 m³ / MIN Total air flow rate 8400 - 9600 m³ / H Nominal pressure 8 bar Operating pressure 6 bar Connection diameter DN 8 Machine weight approx. 3200 kg Static load (with support plates 80 x 100 mm) max. 120 N / CM² Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1986, Table milling machine Manufacturer: Schneider Type: SK2/4 II Year of manufacture: 1986 Technical data - 3,000 - 10,000 rpm - Runs in both directions (left/right) - with Haffner feed unit Ijdpfozuyxajx Abnetk - including accessories Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Isdpezughzsfx Abnetk Feed speed 5-30 m/min. control Memory-Funktion Weinig Powermat 500 with grooved table ----- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool circle: 125-180 mm Tool circle for rebate cutter: 130-160 mm Travel Axial: 17 mm Folding attachment MarathonCoatin for table insert in front of 1st lower tool holder 2nd Spindle - right ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. groove depth: 35 mm Axially travel: 80 mm Radial travel: Min. tool diameter at stop level: 93 mm Max. tool diameter behind stop level: 200 mm 3rd Spindle - left ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads: max. 163 mm Max. Groove depth: 35 mm Axially travel: 55 mm Pressure shoe in front of left spindle, including 2 lateral pressure rollers, spring-loaded Spindle radially CNC-controlled 4th Spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Maximum tool swing diameter for straight cutter heads: 180 mm Maximum groove depth: 35 mm Axially travel: 40 mm Spindle radially CNC-controlled Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. 5. Spindle - Lower ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 225 mm Max. throat depth: 15 mm Axially travel: 35 mm Radial travel: Min. tool diameter to table level: 93 mm Max. tool diameter 6 mm below table level: 225 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Feed roller adjustment travel relative to the left tool holder, axial 35 mm Reduced roller spacing relative to the right tool Machine electrical system ----- Operating voltage 400 V (voltage range 380 - 420 V), 50 Hz. Machine stand, tables, and stops ----- Infeed table: 2500 mm long (including jointing guide) Slotted guide for short or difficult-to-guide workpieces, coated...

Condition: as good as new (ex-display), 4-SIDE EDGE BANDING LINE + DRILLING Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: 202005a) 1st Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFL 325/ M1 / C 202005b) Turning Station "HOMAG" Mod. TDL (from lengthwise to crosswise) Ijdpozrd Dhjfx Abnetk 202005c) 2nd Double-side Sizing & Edge Banding "HOMAG" Mod. KFL 326/ M2 / C 202005d) Connecting Roller Conveyor 202005e) Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 503

Condition: used, • Four-sided planer with a classic spindle • Working width up to 240 mm • Working height up to 120 mm Iedpfxexxkt Aj Abnetk • Min. Working height 6 mm • Spindle speed: 6000 rpm • Infinitely variable feed 5-25 m/min (optionally up to 36 m/min) • Long axial adjustment path on the vertical spindle, up to 80 mm • All tool spindles with independent motors

Condition: ready for operation (used), Four-sided planer / construction timber planer Maximum width: approx. 55 cm Maximum height: approx. 14 cm Immediately available Iedpew Dn Uqsfx Abnetk Location: Austria, near Grieskirchen

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, Heavy-duty 4-sided planer for processing large-format laminated beams and solid wood sections. Itedpfx Ajzp U Hujbnok Technical data: Manufacturer: Kupfermühle Type: DOMA-B Year of manufacture: 1975 Machine number: 10026 Working width: up to 1,350 mm Working height: up to 300 mm Reinforced motors on the vertical spindles Planer heads with adjustable chamfer knives Left vertical spindle electrically adjustable Electric height adjustment Modernized machine control Driven, ribbed infeed roller Scope of delivery: All extraction pipes including collection manifold Four mechanically height-adjustable roller conveyors Inspection and trial run possible by appointment.

Condition: excellent (used), Year of construction: 1962, functionality: fully functional, The machine is in working order and equipped with adjustable chamfer and radius cutters. Technical data: Manufacturer: Kupfermühle Type: VUIN 750 Year of manufacture: 1962 Machine number: 8170 Working width: 750 mm Working height: up to 200 mm Itodpfx Aszp U D Hjbnjk Planer heads: 140 × 200 mm Adjustable chamfer and radius cutters Powered infeed roller Segmented pressure bar Electric height adjustment Dust extraction pipes including collection manifold Condition: in working order Heavy-duty, durable machine construction for use in carpentry shops, sawmills, and timber processing plants. Inspection and test run possible by appointment.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, REX BIGMASTER Planer A+D+FR+FL+AFV+NSH+HFRo+HFRu 6 spindles + 2 chamfering units. Spindle arrangement: U-O-L-R-O-U Feed rate controlled by frequency inverter up to 80 m/min. Planing width 310 mm. Planing height 205 / 300. Isdpfx Abjzrtn Nsnjtk Positioning control. Electrical control cabinet with control unit and power supply. Control panel. Soundproof cabin. 2 sets of tools. Technical documentation.

Condition: good (used), working width: 180 mm, planing height: 100 mm, spindle diameter: 40 mm, type of input current: three-phase, input voltage: 400 V, Four-sided planer Griggio G18/4 Quadromat in good condition. A handy and space-saving machine that is suitable for both smaller workshops and professional use. Specifications: Planing width: 180 mm Spindle diameter: 40 mm Can be operated with 16 A Four-sided planing for efficient processing Itsdpfxozq A Eue Abnok Perfect for planing boards, joists and strips with high precision. Included: Complete knife set Can be delivered throughout Europe at a good price

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, working width 300mm working height 140mm feeding rate 200m/min spindles speed 6000 RPM spindles diameter 50mm spindles set: Itodoy N N U Njpfx Abnsk 1. bottom - 22kW 2. top - 22kW 3. right - 18,5kW 4. left - 18,5kW 5. right - 18,5kW 6. left - 22kW 7. top - 22kW 8. bottom - 22kW 9. top - 22kW 10. bottom - 22kW 11. bottom - 22kW Possibility to purchase the machine with feeder + EUR 17,900 net.

Condition: used, Year of construction: 1991, working width: 220 mm, spindle diameter: 40 mm, working height: 120 mm, total width: 1,500 mm, total height: 1,500 mm, total length: 3,900 mm, overall weight: 2,000 kg, jointer table length: 2,000 mm, number of spindles: 4, chip removal: 10 mm, No. 04530 Four-sided planer and moulder WEINIG Quattromat 22 Used, year of construction 1991, very good condition, machine comes from a one-man workshop Four-sided planing and moulding machine with continuous feed Spindle configuration: 1st spindle bottom / 2nd spindle right / 3rd spindle left / 4th spindle top Infinitely variable feed 6 - 22 m/min Infeed table length 2000 mm Working width 25 - 220 mm Working height 6 - 120 mm Isdszl Uukepfx Abnstk Max. material removal 10 mm Diameter of the spindles 40 mm Motor power of the 1st spindle bottom 4 kW Combined motor power of the 2nd spindle right and the 3rd spindle left 5.5 kW Motor power of the 4th spindle top 5.5 kW Serrated steel infeed rollers Rubber outfeed roller Rubber roller in the table Including operating tools and spare rollers Including operating manual as a .pdf-file Transport dimensions approx. 3900 x 1500 x 1500 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 1994, Second-hand machine Year of manufacture: 1994 Features and technical specifications: - Length of the planing table: 2,100 mm - Tool spindle diameter: 30 mm - Planing head diameter: 100 mm - Speed of the planing shafts: 6,000 rpm - Working width: 30–180 mm - Working height: 6–120 mm - Motor power (bottom, left, right): 3.7 kW each - Upper motor power (thickness shaft): 5.5 kW - Feed speed: 6 and 12 m/min - Electric height adjustment - with 1/10-step control - including cycle-controlled feed roller - Including planing heads - Extraction ports 160/120/120/140 mm Availability: available at short notice Storage location: 63934 Röllbach Iedozk N I Ajpfx Abnjtk

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1.High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Working width planing: 30-300 mm Isdpfxey S R Ago Abnotk Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Main feed motor - 37 kW Frequency concerter - 45 kW 1.Bottom head - 24,5 kW 2.Top head - 30 kW 3.Right side head - 18,5 kW 4.Left side head - 30 kW 5.Right side head -18,5 kW 6.Left side head - 24,5 kW Horizontal splitting: 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm 2. High-Speed Planer/Moulder WACO MAXI 3 spindles for finishing, feed speed 30-300 m/min Main feed motor - 37 kW Frequency converter - 45 kW Feed speed, variable: 30-300 m/min 1.Beading head: 24,5 kW 2.Top head 24,5 kW 3.Rotaplan head 30 kW

Condition: used, Year of construction: 2001, Professional 4-side sanding machine OMEF model LEVIG (year 2001). This high-performance machine is equipped with an extensive configuration of sanding aggregates, ensuring precise and efficient processing of wooden components from all four sides simultaneously. Perfect for advanced woodworking and manufacturing shops. Aggregate Configuration: 1. Bottom 2. Top 3. Transverse top 4. Transverse bottom 5. Right vertical 6. Right horizontal 7. Left vertical Isdpjzmgbxofx Abnstk 8. Left horizontal Technical Specifications: • Manufacturer: OMEF • Model: LEVIG. 1NT-1NLLsx + 1NT-1NLLdx • Year of manufacture: 2001 • Total power: 16.74 kW • Working pressure: 5 - 6 bar • Weight: approx. 2000 kg Workpiece dimensions (min. / max.): • Thickness: 10 / 70 mm • Width: 20 / 90 mm • Length: 400 / 2900 mm Machine dimensions: • Length: approx. 7.0 - 8.0 m • Width: 2.2 m • Height: 2.0 m

Condition: used, Year of construction: 2006, Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Isdpfxsl Hxpkj Abnotk Technical details  - Output: up to 7,200 bph - 4 cavities - Dimensions: 4960 mm x 3900 mm x 3000 mm  - Weight: 15 t  - Operating hours: 44.736  - Bottles - Volume: 200 ml - 2000 ml   - Max. Diameter: 115 mm  - Max. Length: 350 mm - Preforms  - Length: 60 - 200 mm - Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute)

Condition: new, Working width (finished size) 23 – 180 mm Working height (finished size) 6 -105 mm Min. length of single workpiece 300 mm Feed speed 6 – 12 m/min Motor power horizontal spindles 2 x 7.5 kW Motor power vertical spindles 1 x 7.5 kW Spindle speed 6000 rpm Spindle diameter 35 mm Clamping length vertical spindles 120 mm Clamping length horizontal spindles 190 mm Manual lubricant pump Itsdpfx Abeiiv Dconok Profile capacity without axial adjustment on vertical spindle 10 mm Los roller integrated in the outfeed table Suction DM 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick changeover - Front vertical printing unit in front of the left vertical spindle - Feed table length 2300 mm - Tool package consisting of 4 planing heads and a joint rebate cutter

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower Iodpst Hy Sqjfx Abnjtk -Manufacturer: Rietschle, side channel vacuum pump side channel compressor -Type: SKG 340-2V.02 -Drive: 4 kW -Speed: 2850 rpm -Flow rate: max. /h -Compression pressure: mbar -Number: 2x compressors available -Price per piece -Dimensions: 650/480/H555mm -Weight: 76 kg/pc.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: TSA5215 – TSA5218 – TSA5220, We are an Italian Company and we have this machinery installed into our factory in Tunisia. The line is currently configured for the production of floating flooring strips with Uniclic profile and is equipped with a complete set of diamond tools. The line is still installed and can be inspected under power. Production tests are available upon request. Line includes • Panel cutting machine • Motorized roller conveyor • Double machine for long-side profiling • Automatic transfer system • Double machine for end profiling • Automatic stacking system • Complete handling conveyors Technical Features • 10 spindles • Opening machine 1: 180–1200 mm • Opening machine 2: 200–1800 mm • Installed power: 92 kW • 380 V electrical supply Advantages • Complete production line • Immediately available • Installed and fully operational • Inspection and production test possible Iedpezkv Ezsfx Abnotk • Ideal for flooring, panels and similar products

Condition: like new (used), Max planing width: 220 mm Max planing height: 120 mm Spindle diameter: 40 Number of spindles: 4 Order of spindles: bottom 4 kW right 3 kW left 3 kW top 4 kW Itsdpfx Aotqwkxsbnek Working table lubrication pump Electric lifting of the body Power supply: 400 V

Condition: excellent (used), working width 230mm working height 120mm Iodsw Afcvepfx Abnjtk 6 heads heads set: bottom/right/left/top/top/bottom spindles diameter 40mm Memory System control table lubrication spindles speed 6000 RPM

Condition: excellent (used), Year of construction: 2005, working width 230mm Ijdpfx Abjw Afazenetk working height 120mm 6 spindles spindles set: bottom/right/left/top/top/bottom second top spindle with Powerlock toothened roll in the infeed table spindles diameter 40mm spindles speed 8000 RPM Power Com controller variable regulated feeder 5-30m/min

Condition: reconditioned (used), Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ----- Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine for table insert in front of the 1st lower tool holder Electronic digital display for rotary adjustment 2nd Spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind fence: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm 3rd Spindle - Left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm CNC-controlled radial spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm CNC-controlled radial spindle Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper spindle with electronic digital displays, integrated into the memory function or the PowerCom 5. Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system Ijdpfx Aowzmu Rsbnstk ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380–420 V), 50 Hz. All spindles IE2 design. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered. Machine stand, tables, and ...