Used 3 Knife Trimmer for sale (33,048)

Condition: used, Size max 220 x 297 mm Speed max 2.700 c/h Equipment • automatic feeder • 4 knives cutting station Dcodpfec Rgu Hox Ab Ter • edge corner cutting station • delivery

Condition: excellent (used), Year of construction: 2019, Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer ONLY 1.7M books trimmed! Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes. Perfect for short run production, and book of one production which can be achieved through barcode driven set-up. Features: Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Also capable of automatic set-up from the operator panel for same size production runs. One-to-one book production with variable sizes can be produced. Dodpfswu Sptox Ab Tocr Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Specification: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Trim Height: 1 to 65 mm/ 0.04” to 2.560” Production Speed: 400 to 1,000 cycles per hour (Higher production can be reached with piled books)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 3010-015, Equipment: documentation/manual, Trivet in excellent condition. Possible purchase of a device for rounding corners Dcjdpfx Abswf Rbis Tsr Expected price 15 K euros, but I will consider any reasonable offer

Condition: used, Dreimesserautomat / Three Knife Trimmer Hörauf SN-140 Demand Baujahr / Year 2000 - Serial-No. 405060080 Formatbereich (unbeschnitten) / Paper size (before cutting) min. 80 x 60mm - max. 410 x 315mm Formatbereich (beschnitten) / Paper size (after cutting) min. 80 x 60mm - max. 380 x 300mm Stapelhöhe / Pile height max. 80mm Leistung bis zu 20 Takte/min. / Speed approx. 20 cycles per minute Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Djdpfewnpm Nex Ab Tecr On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2005, Three knife trimmer Kolbus HD 150.B Year: 2005 Description: - Right hand infeed - Automatic hopper feeder for inline production - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 Dcjdpsvf Dtyefx Ab Tsr - Sets of knives: 2

Condition: ready for operation (used), MM 360 - 2 up trimmer kit, castings only ! Dodpfx Aeir A E Ijb Tecr

Year of construction: 1993, condition: good (used), Built in: 1993 Size: 350 x 440 mm Speed: 6.600 c/h Equipment: • right hand infeed equipment for changing the format: • 1 set of pressing plates & holders • 1 set of size extensions • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives Dcedpfx Abodym Svj Tsr • info: with cassettes

Condition: used, Year of construction: 1959, machine/vehicle number: 4651, Dreiseitenschneider - Halbautomatisch - Three-Knife-Trimmer - Semi-automatic Wohlenberg A43/30WBaujahr / Year 1959 - Serial-No. 4651 Semi-Automatic Online-Video-Inspection by Skype-Video Dsdpfoh Ax Tdex Ab Tocr We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), MM 890 trimmer 2 up attachment, castings only ! Dedpfxeir A E Dj Ab Tecr

Condition: good (used), Size: max 460 x 315 mm Size trimmed: max 430 x 300 mm min 80 x 50 mm False opening: max 140 mm Feeding height: max 120 mm Speed: max 1.500 c/h Power requirements: 3 kW (220/380V, 50Hz) Motor: max 220/380 V Motor: 50 Hz Width: 2.050 mm Depth: 2.220 mm Height: 1.615 mm Weight: 2.550 kg (approx.) Equipment: automatic infeed with integrated counter stacker • 1 set of clamp plates & plate holders Dcjdpfx Abod S Svbs Ter • 1 set cutting table extension • 1 set cutting table plates • 3 sets of cutting sticks • 2 sets of knives • 1 set of operator manuals • 1 spare part catalogue • standard equipment • 1 set of electrical diagrams • 1 set of standard tools

Condition: used, Mitteltrennschnitteinrichtung - 4th and 5th knife attachment for Trimmer Müller Martini 4th-5th knifeYear 1999 - Serial-No. DSS 2609 Online-Video-Inspection by Skype-Video Dcedpfx Aergbzhjb Ter We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2002, Built in 2002 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm; min 100 x 120 x 2 mm Dsdpfx Abopgwaus Tscr Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar): 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.) Equipment copilot right hand infeed electronic counter 2 sets of knife holders 2 set of knives equipment for changing the format: 1 set of pressing plates & holders 1 set of size extensions 1 set of quick change tables 3 sets of cutting sticks Motorische Formateinstellung automatic setting from: - infeed device - book block pressure - cutting table - side knives - side gauges central lubrication standard accessories

Condition: used, machine/vehicle number: 48966, Dreischneider / Three Knife Trimmer Perfecta SDYEZ-0 Serial-No. 48966 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Dcsdpotzc Iwofx Ab Tsr Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), IN STOCK stack lift 650 kg Dcjdpjir A Iqsfx Ab Ter

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: Dcjdjw D E Rvspfx Ab Ter – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: used, Year of construction: 2007, x-travel 750 mm y-travel 600 mm z-travel 520 mm b-axis -10/+95 ° c-axis 360 ° control iTNC 530 HEIDENHAIN turning speed range - drive spindle 20 - 10.000 min/-1 drive capacity - spindle motor 9 / 13 kW feed speeds 10.000 mm/min rapid traverse X/Y/Z 24 / 24 / 24 m/min table surface area Ø 800 x 620 mm max. table load 350 kg T-slots 9x 14H7 mm table turning speeds 21,5 min/-1 tool taper SK 40 max. tool weight 6 kg tool change unit 30 Pos. voltage 400 V total power requirement 25 kVA weight of the machine ca. 7,4 t dimensions of the machine ca. 3,60 x 2,50 x 2,80 m coolant tank 1,90 x 0,70 x 0,25 m 3+2-axis CNC machining center DECKEL MAHO DMU 70 - Factory no.: 15435713144 - Machine ON: 44,228 h Dcodjx Dnfgjpfx Ab Tjr - Spindle ON: 18,742 h - Control: HEIDENHAIN iTNC 530 - Electric handwheel - Swivel range B-axis 180° - Swivel range C-axis 360°

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Dodpfx Aex Dkpbsb Tocr Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: excellent (used), CATALOG NUMBER: 7404 TECHNICAL DATA - Minimum workpiece thickness: 16mm Dsdet H E Ikjpfx Ab Tjcr - Maximum workpiece thickness: 60mm - Height to table surface: 920mm - Motor power: 1.2kW - Voltage: 400V - Disc – guillotine – feed rollers for tape – glue tank – 3 guide rollers (first one is the drive roller) - Worktable: 1600x670mm - Dimensions (L/W/H): 1600x1400x1100mm - Weight: 170kg ADVANTAGES – Polish manufacture – Suitable for edging both straight and curved edges – Used machine, in very good condition Net price: 5,900 PLN Net price: 1,400 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with significant fluctuations)

Condition: used, diameter div. Dcjdpfx Abjxyzxls Tsr number 44x tool adaptor SK 40

Condition: excellent (used), Overall dimensions: 3700 x 1070 x 1700 mm Disc coil inner diameter: 460 - 600 mm Maximum sheet roll width: 1000 mm Dcodpfx Abjpvia Es Ter Direction of rotation: Bidirectional Hydraulic operation: - rotation - transverse movement on the chassis - shaft grip Pneumatic operation: - brake

Condition: refurbished (used), Year of construction: 1996, Universal tool milling machine KUNZMANN WF 4/3 Dcjdpfxjq Uluco Ab Ter With 3 axes Heidenhain digital readout Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 - 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X , Y , Z axis Hydraulic tool clamping Automatic central lubrication pump for X , Y , Z axis Machine light 4-piece machine shoes Coolant device Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICE TRAINING !!! THE MACHINE IS IN GOOD CONDITION !!!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, 3 x VMI 250kg fork mixers (1 x 2018 and 2 x 2004) with 9 x removeable bowls, due to come out of a UK bakery in January 2026. Each machine is fitted with a hydraulic pack to lift the lid and pneumatic bowl clamp. Previously used to mix 108kg and 144kg batches. Details below: Machine 1: 1 x 2004 VMI fork mixer. Model - 4440MAEHW. Serial number - 138136. Supplied with 3 x removeable bowls. This unit has a shared water meter with Machine 2. Machine 2: 1 x 2004 VMI fork mixer. Model - 4440MAEHW. Serial number - 138137. Supplied with 3 x removeable bowls. This unit has a shared water meter with Machine 1. Machine 3: 1 x 2018 VMI 250kg fork mixer, fitted with own water meter. Model - 4440 MAEHW. Serial number - 183875. Supplied with 3 x removeable bowls and spare motor gearbox. Dedpfx Absxz Hrtj Tecr Footprint per mixer - 1.8m long x 1.75m wide x 2.2m high (with lid raised).

Condition: used, In this offer you buy a used booklet trimmer "Canon Booklet Trimmer F1" Object of sale: 1 x Canon Booklet Trimmer F1 suitable for the following models, among others: Canon imagePRESS C850/C750/C650 Canon imagePRESS C165 - series Dodpfx Abst Hd D Re Tocr Canon imagePRESS C910 - series Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm Dcsdpfswa Am Hox Ab Tor - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: new, Year of construction: 2024, Welding rotary table Protec KT 10 000 HV Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Tilting range 0 to 130 Dimensions: height tilted min: 1080mm height tilted max: 2200mm height horizontal min: 1400mm Dcodpfxjk S D N Eo Ab Tor diameter of the clamping disk 2000mm length 3250mm, width 1780mm speed from 0,05 to approx. 0,6 rpm.