Used Three Knife for sale (6,846)

Condition: used, Year of construction: 2005, Three knife trimmer Müller Martini Esprit (1576) Year: 2005 For three side trimming of book blocks and brochures, operable in connection with book production lines. Description: - Colour monitor with touchscreen - Automatic setting - Infeed conveyor from the left - Left hand infeed - Exchangeable cutting tables, number: 3 - 11 - Sets of knives: 2 Technical specifications: - mechanical speed: up to 2.000 cycles/h - size range untrimmed max.: 391 x 320 mm Hsdpfxsvxfkgo Ahveni - size range untrimmed min.: 148 x 95 mm - size range trimmed max.: 311 x 305 mm - size range trimmed min.: 142 x 75 mm - book thickness: 2 - 80 mm

Condition: used, Year of construction: 2001, Three knife trimmer Müller Martini Merit S Hnodpfeylblksx Ahvoi Year: 2001 Hour counter: 30400 Description: - Digital display - Infeed conveyor from the left - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 103 mm Maximum size (cutted): 434 x 310 x 80 mm Minimum size (cutted): 136 x 100 x 2 mm Max. mechanical speed: 1.000 - 4.000 cycles / hour Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), Year of construction: 2019, Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer ONLY 2.2m books trimmed! Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes. Perfect for short run production, and book of one production which can be achieved through barcode driven set-up. Features: Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Also capable of automatic set-up from the operator panel for same size production runs. One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Specification: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Trim Height: Hnsdewu Sptepfx Ahvei 1 to 65 mm/ 0.04” to 2.560” Production Speed: 400 to 1,000 cycles per hour (Higher production can be reached with piled books)

Condition: used, Year of construction: 2004, Three knife trimmer Kolbus HD 142.P Year 2004 Description: - Co-Pilot with touchscreen - Semi automatic setting - Right hand infeed - Counter stacker - Exchangeable cutting tables (standard set) - Knife pre-setting device Hnsdpfx Aownbv Aohvsi - Set of knife holders: 2 - Sets of knives: 2 Kolbus: HD 142.P Maximum size (cutted): 305 x 420 x 80 mm (WxHxT) Minimum size (cutted): 100 x 100 x 2 mm (WxHxT) Maximum size (uncutted): 310 x 430 x 80 mm (WxHxT) Maximum pile height: 80 mm Max. mechanical speed: 3.900 cuts/h Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Dreimesserautomat / Three Knife Trimmer Hörauf SN-140 Demand Hedjwnpm Nepfx Ahveni Baujahr / Year 2000 - Serial-No. 405060080 Formatbereich (unbeschnitten) / Paper size (before cutting) min. 80 x 60mm - max. 410 x 315mm Formatbereich (beschnitten) / Paper size (after cutting) min. 80 x 60mm - max. 380 x 300mm Stapelhöhe / Pile height max. 80mm Leistung bis zu 20 Takte/min. / Speed approx. 20 cycles per minute Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Dreimesserautomat von Heidelberg in einem guten Zustand. Three Knife Trimmer of Heidelberg in good condition. Hnjdoxdc N Tepfx Ahvoi Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1959, machine/vehicle number: 4651, Dreiseitenschneider - Halbautomatisch - Three-Knife-Trimmer - Semi-automatic Wohlenberg A43/30WBaujahr / Year 1959 - Serial-No. 4651 Semi-Automatic Hnodpfx Ahoh Ax Tdovsi Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 48966, Dreischneider / Three Knife Trimmer Perfecta SDYEZ-0 Serial-No. 48966 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Hsdpfx Ahjtzc Iwevsni

Condition: used, Three Knife Trimmer Kolbus HD 140.P with Copilot and automatic infeed Dreimeserautoat / Three Knife Trimmer Kolbus HD 140 P Baujahr / Year 2000 - Serial-No. 347 Format / Size max 305 x 420mm Formatbereich beschnitten / Size (trimmed) min. 100 x 100mm - max. 300 x 400mm Buchblock Stärke / Book block thickness min. 2mm - max. 80mm Stapelhöhe / Feeding height 80mm Mechanische Laufleistung / Speed max. 3.900 c/h Hnjdpfxsyb Swvo Ahvoi Rechtseinfuhr / Infeed from right Equipment: Copilot automatic infeed automatical speed Regulation automatic lock of knife adjustment and pressing block automatic setting of bookblock pressure Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2005, Three knife trimmer Hnedpfxjvf Dtys Ahvei Kolbus HD 150.B Year: 2005 Description: - Right hand infeed - Automatic hopper feeder for inline production - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2

Condition: used, Three Knife Trimmer with automatic infeed belt for Inline or Offline production Hnsdpfx Ahex Swm Eovji Dreimesserautomat / Three Knife Trimmer Wohlenberg 44 FM 50 Baujahr / Year 1988 - Serial-No. 3296-013 Format / Size max.  315 x 440mm  Thicknes max. 100mm Speed max. 3000 cycles per hour Automatischer Einlauf / Specification automatic feeding Bandauslage / Belt delivery Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Hsdjwfq T Sspfx Ahvsni Discharge of scrap from under the machine directly to the container.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, cutting height (max.): 50 mm, product length (max.): 330 mm, product width (max.): 330 mm, production capacity: 1,000 unit/h, No reserve price – guaranteed sale to the highest bidder! Three-knife trimmer for high productivity: up to 1,000 cutting cycles per hour! TECHNICAL DETAILS Cutting thickness: 2 – 50 mm Number of knives: 3 Untrimmed format: Maximum: 330 x 330 mm; Minimum: 148 x 105 mm Trimmed format: Maximum: 300 x 300 mm; Minimum: 142 x 100 mm MACHINE DETAILS Hnedpexlzuqsfx Ahvsi Dimensions (L x W x H): 2,260 x 1,160 x 1,600 mm Weight: approx. 1,530 kg FEATURES User-friendly LCD display Flexible processing of various product sizes Fast changeover times of less than 10 minutes Advanced locking system for operator safety

Condition: used, Year of construction: 2009, Three knife trimmer Müller Martini Orbit (3675) Year: 2009 For three side trimming of book blocks and brochures, operable in connection with soft- and hardcover book production lines. Description: - Colour monitor with touchscreen Hnodpowuthwofx Ahvoi - Infeed conveyor - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 72 mm Maximum size (cutted): 304 x 303 mm Minimum size (cutted): 136 x 70 mm Book thickness: 2 - 80 mm Max. mechanical speed: 1.000 to 7.000 cycles/hr Condition: This machine is offered fully cleaned and checked in good running condition Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: used, Year of construction: 2010, functionality: fully functional, Horizon Three-Knife Trimmer for sale! Machine in production in very good condition. Could be tested. Available immediately! Model: HT-101 Manufactured: 2010 Serial: 326003 Description Hodpfxsway N Sj Ahvoni Trimming blower TB -100 Feed guide HCG - 100 * Fully automated three-knife trimmer; * Can be used in-line or off-line; * Automated setup for different book sizes and precision cutting accuracy; * Job changeovers are performed simply and quickly through the color LCD touch-screen. There are very few replacement parts when changing over the HT-101; * Knife height and cutting depth are easily adjusted through the color LCD touch-screen. TECHNICAL SPECIFICATION: * Max. untrimmed book size: 410 x 320 mm * Min. untrimmed book size: 148 x 105 mm * Max. trimmed book size: 366 x 300 mm * Min. trimmed book size: 145 x 103 mm * Trimming width: fore-edge: 45 mm / top-bottom: 30 mm * Trim thickness: max. 100 mm / min. 5 mm (min. book thickness is 2 mm) * Production speed: 400 to 1600 cycles / hr

Condition: ready for operation (used), IN STOCK Hodpfxeir A Iqe Ahvoni stack lift 650 kg

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period from 04.05.26 to 07.05.26. TECHNICAL DETAILS Measuring range: 40 - 100 mm Number of micrometers: 6 Number of measuring rings: 3 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 510 x 370 x 100 mm Weight: 20 kg External reference: Lot 11 Hnedpsyr H Nnofx Ahvsi

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Placing a bid entails a binding commitment to collect the item either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Measuring range: 60 - 100 mm 2-piece set MACHINE DETAILS Hnsdpfx Aeynz E Aehvsi Dimensions & Weight Dimensions (L x W x H): 300 x 200 x 100 mm Machine weight: 5 kg External reference: Pieper - Lot 161

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS 13-piece set (various sizes) Measuring range: up to approx. 100 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 500 x 400 x 120 mm Machine weight: 20 kg External reference: Pieper – Lot 163 Hnsdpfoynkvqex Ahvji

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Hjdpfeyni T Uox Ahvjni Bidding obligates collection within the specified periods: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS 28 pieces (various manufacturers) Measuring range: 4 – 50 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 660 x 600 x 50 mm Machine weight: 20 kg External reference: Pieper – Lot 168

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to timely collection, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS 9-piece set Measuring range: 3.5 – 90 mm MACHINE DETAILS Hnodpfx Ahoyni Swovoi Dimensions & Weight Dimensions (L x W x H): 660 x 600 x 100 mm Machine weight: 20 kg External reference: Pieper – Lot 169

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS 5-piece set Measuring range: up to 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 500 x 400 x 100 mm Machine weight: 15 kg Hsdpfxsyni Dyj Ahvjni External reference: Pieper - Lot 170

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, travel distance X-axis: 6,000 mm, workpiece weight (max.): 1,000 kg, laser power: 20,000 W, pipe diameter (max.): 6,000 mm, Equipment: cooling unit, safety light barrier, Max. Length of Tube: 6m Cutting Capacity of Round Tube: Φ360mm Cutting Capacity of Square Tube: Φ360mm Max. Load: 1000kg Hedpfov D T H Tjx Ahvsni Zero Waste Cutting Full stroke movement, capable of cutting both ends of the pipe, improving material utilization Full Pipe Cutting available Standard auxiliary loading and unloading system loading, unloading, and cutting of 6m full pipes available Bevel Cutting Function available Bevel angle adjustable from 0-45° Capable of V, X, Y, K type bevel cutting Optional Automatic Loading and Unloading Saves labor costs, and increases production efficiency Intelligent production for high efficiency

Condition: excellent (used), Year of construction: 1994, Weinig 925 Rondomat profile knife grinder Stock code: 15443 Price: request for quotation $ Subcategory: Knife grinders Producer: Weinig Model: 925 Condition: used Tag number: 15443 Machine type: Grinding machines UMCC: G6775 Producer: Weinig Model: 925 Rondomat Year: 1992 Serial number: 925-438 Description: Weinig 925 Rondomat profile knife grinder We offer turnkey services with this machine. Printable page Get a quote General technical data Shaft length 9-1/2 inches Maximum tool diameter 9 inches Motor 1.5 HP, 220/440 V 8-7/8 Maximum wheel diameter Variable grinding wheel speeds: 1700, 2000, 2250, 2800 rpm Relief angle for back relief: 15 - 45 degrees Hnoden Ut Slopfx Ahvji Axial: 0 - 10 degrees Cooling liquid

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, travel distance X-axis: 6,000 mm, positioning speed: 100 m/min, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, fume extraction, nozzle changer, safety light barrier, 3 Chuck Professional pipe laser cutting machine (GS-6022HG) Working area (L/W): 6000mm*φ220mm Repeat positioning accuracy: ≤0.03mm Max. positioning speed: 100m/min Hodpjvrwt Tsfx Ahvoni Max. acceleration: 1.0G Max. rotating speed of chuck: 110r/min Machine weight: 10T Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm ~ 150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flat oval tube: Short axis≥15mm, long axis≤210mm Channel steel: Max 20# I-beam: Max 18# H steel: Max 175*90mm Supports high-precision cutting of round tubes, square tubes and special-shaped tubes. Flexibly adapts to different specifications of tubes.