Staübli TX2-90

Stäubli TX2-90

Condition: good (used), Year of construction: 2018, functionality: fully functional, overall weight: 730 kg, load capacity: 14 kg, arm reach: 1,000 mm, ROBOTERARM Load capacity 14 kg Maximum reach (between axes 1 and 6):1000 mm Repeat accuracy - ISO 9283: ±0.03 mm ROTATION UNIT Maximum rotation angle:350° Safe positions:0° / ± 90° / 180° DRIVING UNIT Maximum speed:16.8 °/s Dsdpfx Astqmiheb Tjwf Tool storage station:4 tools per storage station Tool changing system:MPS032 Maximum speed:0.6 m/s Position accuracy of the platform:± 10 mm, 1° Dimensions (without robot arm):890 x 1120 x 1000 mm (W x H x D) Number of laser scanners:3 (360° monitoring range) Height of the scanning level (safe for persons):150 mm Drive type:Differential drive TOTAL SYSTEM Navigation:based on laser scanner data Protection class wrist / arm / overall system:IP67 / IP65 / IP20 Average surface pressure on the floor max.:10 N/mm² Power supply:1 x 230 V / 16 A Interfaces WLAN, LAN, Fieldbus (1) Multi-coupling:Compressed air, power supply, 2x Cat5e, 26 x 1 mm² contacts Battery capacity:5.8 - 8.7 kWh Compressed air tank:0.75 l (2) / 7 bar Visual and acoustic effects:4 LED units, storage space for up to 16 audio files Weight:730 kg

Condition: excellent (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 12/2026, total width: 1,380 mm, total length: 950 mm, total height: 1,980 mm, input frequency: 50 Hz, overall weight: 258 kg, electrical fuse: 32 A, power: 21 kW (28.55 HP), Hobart universal dishwasher XL Model: UXTLS - Basket size: 1140 x 680 mm - Insertion height: 850 mm - Simple operation with 3 programmes and colour display - Drain pump - Detergent dosing device - Rinse aid dosing device Dimensions: 1380 x 950 x 1980 mm (W x D x H) Connection: 400V, 32A CEE plug Dsdpfxewmvz Dj Ab Tjwf Used machine, cleaned Options: Delivery service Water filter Maintenance contract Service package Instruction & commissioning Find your dishwasher with us!

Condition: like new (used), Year of construction: 2020, operating hours: 550 h, functionality: fully functional, machine/vehicle number: F/20/0020976/A/001, Maximum load capacity: Up to 14 kg Reach: 1000 mm Number of degrees of freedom: 6 Dwsdpfoxck Riox Ab Tjf Repeatability: ± 0.02 mm Pneumatic connection: 2 direct lines between base and forearm 2x 5/2-way bistable solenoid valves (compressed air) Electrical connection on arm: 17 electrical I/O lines Multibus cable in arm: 13 electrical lines, 4 Multibus Cat5e lines, DIN M12 Standards and protection ratings: Cleanroom standard – ISO 14644-1: Level 5 Protection rating (wrist): IP65 / (IP67 with overpressure unit) Safety: Up to Class SIL3-PLe (collaborative operation with humans: Safe limited speed, Safe stop, Safe zone, Safe tool) Control and license: CS9 controller with VAL3 license Power supply: 400-480V-50/60Hz Connectivity: UPC UA / IP67 EtherCat I/O modules for connecting additional equipment, shielded Ethernet Cat5e for multi-gripper, camera and sensors Horizontal cable outlet

Condition: excellent (used), Year of construction: 2016, Takisawa TMM 250 3 turn-mill center, year 2016, Fanuc turning length:1300 Turning diameter: 350 mm Spindle speed (max.): 4000 1/min 9 axes 2 x spindles 2 x C-axis Swing diameter 780 mm Turning diameter max. 350 mm Turning length max. 1,300 mm Chuck diameter left 250 mm Chuck diameter right 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool carrier 15-position turret - all positions driven Dwsdpfx Ajrt Ip Nob Tof Complete simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool positions Workpiece magazine, to the right of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle 20 bar Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.

Year of construction: 2002, condition: good (used), machine/vehicle number: SIKBK, DEMAG KBK crane sky crane runway dimensions approx. 10x6m Payload / lifting load 500 KG - 0.5 tons Dwsdpfx Abemqf Nbj Tef Technical data of the system: Crane runway made from Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. incl. Demag DK2 500KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Djdpfx Abeia Rtds Towf Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2020, Technical details: turning diameter: 670 mm turning length: 1540 mm control: F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover: 700 mm Travel turret No.1 (milling spindle) x/y/z: 495 / ± 150 / 1562(+164) mm Rotation B-axis: -30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/40/40 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 20,2/18,8 kW Torque of milling spindle: 120 / 44 Nm tool taper milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool/tool, milling spindle: 1,25 s Spindle 1 RPM: 3000 1/min Spindle 1 Power: 36 / 30 / 25 kW C-axis spindle 1: 0,001 ° Bar capacity spindle 1: 102 mm Spindle 2 RPM: 4000 1/min Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0,001 ° Bar capacity spindle 2: 80 mm dimensions of the machine ca.: 7,8 x 3,6 x 2,9 m Linear scales on axis: X, Y programmable steady: KLU-A530 & SLU-X3.2 Accerories Chip conveyor tool setting spindle load monitor Airblow system Airblow system internal to cutting tool Spindle 1 Chuck Kitagawa 250 (B 210) mm Spindle 2 Chuck Kitagawa 250 (B 210) mm Interface for coolant through the spindle 70 bar Tailstock specification for spindle 2 Measuring probe for work piece Renishaw OMP60 pendant hand wheel Parts and total counter Signal lamp 3 colors Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear window Quick fixed cycles Program restart Signal lamp 4 colours Ethernet I/P Interface manual tool eye Automatic door Air Filter Oil skimmer Tactile sensor for workpiece measuring Airblow system external Subspindel Spindle 1 coolant jet Spindle 2 coolant jet Coolant Gun Coolant through spindle 70 bar with filter Knoll High performance turning and milling center with multi axis milling head, 76 tool magazine Capto C6, main- and sub spindle, which can act as tailstock. It has automatic door and Matris robot R-2000iC/165F. Dodpfx Ajwl Ag Deb Tjwf *

Condition: ready for operation (used), Load capacity: 5000kg. Djdpfx Ajt H Rfbjb Tjwf

Condition: good (used), Robot Manfacturer: Staeubli Dwsdpfxebrhtde Ab Tof Type: RX170

Condition: used, Year of construction: 1996, grinding length 600 mm grinding width 250 mm workpiece height ca. 385 mm table surface area 600 x 200 mm table speed -stepless- 2 - 35 m/min table load capacity max. 250 kg grinding wheel size ø 225 x 25 mm grinding wheel hole diameter 50,8 mm vertical feed autom. 0,001 - 0,099 mm rapid traverse vertical 600 mm/min cross feed of table continual 10 - 1000 mm/min rapid traverse cross 1000 mm/min total power requirement 6 kVA dimensions of machine L x W x H 2,65 x 1,70 x 2,28 m Accessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, grinding wheel with flange, wheel trueing attachment, Dwedpst Tqrnofx Ab Tef wet grinding attachment with paper band filter