Vertical machining center

Mikron UCP600

Condition: repair required (used), Year of construction: 2003, Parts shown by hand not come. Kjdpfx Afom Dtnrjgolt Pallete changer EROWA not come.

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Control: MAZATROL matrix 2 Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Klsdpfx Ajyyybhefgjt Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 X - Travel: 850mm Y - Travel: 550mm Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, 20000 rpm, Kedjr Urm Sepfx Afgslt tool measurement on table will come, Parts shown by hand not come.

Condition: good (used), MIKRON UCP 600 VARIO is a 5‑axis machining center engineered for high precision, accuracy and reliability in complex machining. Table 320×320 mm; travels X600 Y450 Z450; indexing C n x360°; head B -115/+30°. 30‑station tool magazine; tool Ø max 80 mm, length 200 mm, weight 8 kg; spindle nose HSK‑A63. Spindle stepless 0–20,000 rpm, 30 kW, 91 Nm torque. Feed 15,000 mm/min, rapid 22 m/min; power 3x400 V 50 Hz. Machine weight ~7,700 kg; dims L6820×W4800×H2540(2810) mm. Options: paper filtration, water cooler, chip conveyor, EROWA UPC table, electronic handwheel, lamp, status light. 4+5 axis revised 2023. Achieves tight tolerances; suited to automotive, aerospace, medical, watchmaking and machine‑tool sectors. Klodpoyxn Nkjfx Afgot

Condition: used, HERMLE B 300 is a 5‑axis machining center engineered for precision, high accuracy and production reliability. Working capacities: travels X 800 mm, Y 600 mm, Z 500 mm; table load max 250 kg; A‑axis ±110°; C‑axis 360°; max tool Ø 125 mm, tool length 300 mm, max tool weight 8 kg. Key specs: spindle taper HSK‑A63; spindle speed 20–15,000 rpm; spindle power 10 / 19 kW; rapid traverse 30 m/min; acceleration 5 m/s; max feed force 8,000 N; supply 3x400 V 50 Hz; total power 31 / 43 kVA; machine weight ≈ 8,500 kg. Equipment: 30‑position tool magazine, 1,000 L coolant system, BLUM tool breakage monitoring. Delivers tight tolerances; suited to automotive, watchmaking, aerospace, medical and toolmaking. Kledpfeyxnt Asx Afgot

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 107.32.99.077, travel distance X-axis: 530 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 22 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 22 m/min, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, Kjdpfx Aexrc Sqefgjlt for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2001, Technical data: Tool holder: SK 40 Travels: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Weight, approx.: 6500 kg Kljdpjt Hr Ahsfx Afgjt Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: - Control Heidenhain TNC 430 - 4-axis from SMP (France)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,050 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information. Additional equipment • new spindle since 2021: only 5700 spindle hours (Wear-related spindle replacement) • Inspection under power possible Machine Benefits Technical Machine Benefits • Through-spindle air flow • Internal coolant supply: 60 bar • Coolant system with 1000l paper belt filter • Rotating viewing window • Chip flushing gun // bed flushing • Oil mist extraction • Blum tool breakage/measurement • Heidenhain 3d touch probe • Mobile electronic handwheel • Kinematics package Kledpfox D Dx Aox Afgjt Extra Information Spindle replacement due to wear (new spindle: 5600 hours since 2021) Production Hours: Control on: approximately 33300 hours, Spindle on: 17050 hours (new spindle 5600 hours, replaced in 2021 due to wear) Tool Positions: 96 Includes tool holders (shrink-fit chucks, collets, etc.)

Condition: new, travel distance X-axis: 850 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 610 mm, workpiece height (max.): 450 mm, workpiece weight (max.): 500 kg, number of slots in tool magazine: 60, controller manufacturer: HEIDENHAIN, overall weight: 14,000 kg, controller model: TNC 7, coolant supply: 40 bar, spindle motor power: 32 W, rapid traverse Z-axis: 48,000 m/min, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rotary table diameter: 630 mm, rotational speed (max.): 12,000 rpm, spindle nose: SK 40 BIG PLUS (BVD 40), tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, workpiece diameter (max.): 750 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, LAGUN EVZ 630 – 5-Axis Simultaneous Machining Center | HEIDENHAIN TNC 7 | Available on short notice New LAGUN EVZ 630 5-axis simultaneous machining center for the highest precision and dynamic performance in modern machining. The machine impresses with its robust design, high thermal stability, and state-of-the-art HEIDENHAIN control and drive technology. Ideal for tool and mold making, mechanical engineering, and demanding contract manufacturing. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Financing / lease-purchase options available ✔ Compact design with high stability ✔ 24 months warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and long-lasting machine concepts. The machining centers impress with their reliability, easy maintenance, and low operating costs. Technical specifications: Control: HEIDENHAIN TNC 7 CNC control HEIDENHAIN TFT screen 19" HEIDENHAIN motors, scales, and electronic handwheel HR 510 Chip disposal: Chip conveyor Enclosure: Full enclosure with automatic door opening for convenient and ergonomic access to the working area Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your advantages as a JMT customer: ✔ Official LAGUN sales partner in Germany Klsdep Nnutopfx Afgot ✔ Technical support and on-site service ✔ Fast supply of spare parts ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and prepare an individual offer.

Condition: excellent (used), MIKRON HPM 800 U is a 5‑axis machining center for precision, high accuracy and reliability. Table 630×440 mm, 5 T‑slots, table load 800 kg; travels X800 Y800 Z550 mm; A +91/‑121°, C 360°. HSK‑A63, spindle‑nose to table 600 mm; 115 tools, Ø max 80 mm (160 free), tool length 350 mm. Spindle 0–20000 t/min; feed 0–20000 mm/min; rapid 45 m/min; accel. 6 m/s; max feed force 6000 N; 3×400V 50Hz; 55 kW; weight ~15000 kg; size 3505×3100×2980 mm. Accessories: high‑pressure coolant, paper filtration, 2 pallets, touch probe, laser tool preset, chip conveyor. Suited to tight tolerances in automotive, aerospace, medical, watchmaking. Kljdpfxeyxn E Se Afgst