NC lathe

METOSA Smart Turn 5 - 260

Condition: new, power 2,2 (3,0) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 735 mm width 1 466 mm height 1 290 mm insertion resp. discharge height 850 mm weight 350 kg Ndsdsb I Sx Eopfx Af Sjb material 1.4301 / AISI 304 lifting force up to 550 kg / bin rotation time 15 sec fruit discharge height 900 mm fruit discharge width 500 mm suitable for standard bulk bins 1 000 x 1 200 x 970 mm scope of delivery hydraulic power unit

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Ndedexq Eyujpfx Af Seb

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Ndjdpfxsxlngao Af Seb Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: like new (used), 1 unused universal vertical milling head, suitable for an ORADEA / EURO-MILL FUS 32 Design: “MAHO”, ISO 40 shank, quill stroke 100 mm, designed drive power approx. 3-4 kW, max. speed 2000 rpm, … Optional accessories: - Multiplier, gear ratio 1:4, ISO 40 shank Price: EUR 499.00 - Attachment for automatic feed device for the vertical milling head quill, “MAHO” system, 6 feeds 0.02 - 0.2 mm/rev Price: EUR 1,880.00 - Cross milling head, additional head for the vertical milling head with spindle taper ISO 30, rotatable, 360 degrees Price: EUR 585.00 Ndsdpfx Afsddtwbe Sob plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), spindle bore: 360 mm, travel distance X-axis: 798 mm, travel distance Z-axis: 358 mm, spindle motor power: 45,000 W, rotational speed (max.): 500 rpm, total height: 2,100 mm, total length: 8,100 mm, total width: 2,750 mm, overall weight: 13,000 kg, Chip conveyor  SMW Front and Rear chuck 700 mm  Double revolver 6+8 positions Big Bore 360 mm Tailstock with power quill Tooling package included with inserts and jaws Ndjdowxb Erepfx Af Ssb Max. turning Ø:665mm X-Axis: 798mm Z-Axis: 358mm Spindle bore: 360mm Speedrange: 500Rpm Spindle power: 45kW Pinole taper: 6Mk Stroke pinole: 230mm Quill Ø: 150mm Length: 8100mm Width: 275mm Height: 2100mm Weight: 13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2014, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center spindle revolutions: 12000 rpm table size X: 1270 mm Nedpfx Afozguhys Sodb table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, distance between stands: 2,550 mm, control type: CNC control, Max. bending length 3100 mm Distance between column 2550 mm Max. pressing force 120 T Dis. Beam - Table 470 mm Beam stroke 180 mm Troth beam 400 mm Approch speed 200 mm/min. Working speed 10 mm/min. Return speed 120 mm/min. Adjustment X-Axis back gauge 1000 mm Number of controlled axis Y1 / Y2 / X/ Z1 / Z2 / R-Central Control TS1 Crowning Yes Hydraulic toolclamping Yes Power 7.5 kW Nsdpfxjxyw Sbo Af Sedb

Condition: new, sheet length: 2530sheet thickness: 6prebending: 5total power requirements: 5,5weight approx.: 3750messurements (LxWxH): 4250 x 1.200 x 1.250 Ndjdpfxsd Ab E Uj Af Seb

Year of construction: 2010, condition: used, Newtec CELOX optical sorting line Machine has been upgraded to the newer type CELOX in 2016 The order is based on the following specifications Ambient temperature ± 5 – 25 ºC. Product Clean, washed carrots Capacity: 8 to 10 tons per hour, depending on the batch (quality and sorting) Product foreign materials The Celox cannot detect foreign materials such as glass, wood, stones etc. Functionality: Length: +/- 3mm (less than 1% errors) Diameter: +/- 1mm (less than 1% errors) broken: 60-65% is removed (on "normal" broken carrots) there will be 5-6% good carrots among the errors C/S shape: 85-90% is removed. There will be 3-4% good carrots among the errors Volume: +/- 5% -Incl. conversion of complete camera unit to new version Ndedpfx Ajurhx Nsf Sjb -9 Cameras with 8 megapixel resolution (current 2 magapixel) Cameras look at the carrots from above and below at an angle -Better detection of root rot -Better software for deformed products -Better software for quality and dimensions -Incl. set of vibrating channels for the new belts

Condition: used, Press brake Amada Promecam HFB 12530 Nodpex H A Dljfx Af Ssdb 5 axes Y1 Y2 X Z1 Z2 Controller Delem DA58 Retrofitting available