Vertical machining center

Mazak VTC-800/20SR

Condition: good (used), Bar loader LNS ECO LOAD Dksdpfx Afjlg Aq Aonjg

Condition: used, Year of construction: 2002, functionality: fully functional, turning length: 3,000 mm, turning diameter over cross slide: 520 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 3,150 mm, Turning diameter 520 mm Turning length 3000 mm Control SIN 840 D Siemens Z-axis 3150 mm Feed Z-axis 1 - 40,000 mm/min Rapid traverse Z-axis 40.00 m/min X-axis 600 mm Djdpfexadk Dex Afnekg Feed X-axis 1 - 30,000 mm/min Rapid traverse X-axis 30.00 m/min Main spindle S1 Spindle speed range 1 - 3,300 rpm Drive power at 100% load 29.00 kW Spindle nose DIN 55026 - Size A11 Spindle diameter at front bearing 160 mm Spindle bore 115 mm C-axis 360 x 0.001° Milling spindle S2 Tool holder Capto C6 Infinitely variable speed range 1 - 6,000 rpm Y-axis -100 / +150 mm B-axis -110 / +110° Tool magazine with 100 positions Total power requirement 145 kW Weight of the machine approx. 24 t

Condition: excellent (used), Tuscan LC38 x 3000mm CNC Lathe Swing Over Bed 970mm Swing Over Cross Slide 420mm Centre Height 490mm Distance Between Centres 3000mm 12 Station Duplimatic Turret Tailstock Boring Bat Attachment Boring Bar 2 x 3 Point Fixed Steady 1 x Travelling Steady Fanuc OiTC Control Djdpfsvtw Imsx Afnskg C Axis & Driven Tools Serial Number LC223806086 Year 2010 /10

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 0i-MD, total height: 3,170 mm, total length: 5,500 mm, total width: 2,892 mm, table width: 760 mm, table length: 2,160 mm, table load: 1,800 kg, overall weight: 15,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 800 mm, spindle motor power: 18 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED vertical machining center “DOOSAN mod. DNM 750L-” with FANUC 0i-MD CNC Dkedew D Aynspfx Afneg

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t Dsdpfx Afof Sqckjnskg 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded. Please just contact us, we will be happy to advise you without obligation.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours of spindle: 1,200 h, 1 unit CNC machining center C 12 U with 5-axis simultaneous Heidenhain iTNC 640 control Manufacturer: Hermle Year of manufacture: 2015 Technical specifications Working area: - Travel paths X-axis: 350 mm Y-axis: 440 mm Z-axis: 330 mm - Swivel range A-axis: +115° / -115° - Swivel range C-axis: 360° - Direct linear measuring system, resolution: 0.0001 mm - NC rotary/swivel table: 320 mm diameter - Table load capacity: 100 kg - A-axis rotation speed: 25 rpm - C-axis rotation speed: 40 rpm Main spindle drive: - Drive power (100% - 40% duty cycle): 17 - 25 kW - Torque (100% - 40% duty cycle): 54 - 80 Nm - Spindle speed: 20 - 18,000 rpm - Spindle taper: HSK-63 Rapid traverse In X, Y, and Z-axes: 30 m/min Linear acceleration: 4 m/s² Dkjdpfsx N Dt Hjx Afnog Tool changer: - Magazine capacity: 36 tools - Max. tool diameter: 80 mm - Chip-to-chip time as per VDI 2852: 4.5 sec Space requirements: 4.00 x 4.00 x 3.10 m Machine weight approx.: 7.5 t Equipment Clamping plate, approx. 65 HSK 63 tool holders, 2 machine vices, 1 three-jaw chuck, electronic handwheel, Heidenhain probe, Blum calibration pin, chip flushing gun, emulsion mist extraction, Blum tool breakage/tool measurement A1, tool setting device, kinematics suitcase, chip conveyor without IKZ (internal coolant supply) Delivery terms: ex stock, Bad Emstal Availability: available from January 2026, by arrangement; machine can be demonstrated under power Technical data subject to change without notice.

Condition: excellent (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, nominal power (apparent): 30 kVA, torque: 163 Nm, table load: 400 kg, rotary table diameter: 400 mm, rotational speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 48, tool length: 300 mm, tool diameter: 70 mm, tool weight: 10 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Technical characteristics: CNC OSP P 200 Chip conveyor 48 tools Continuous table 360,000 pos. 15,000 rpm BT 40 Cooling through spindle 20 Bar Presetting on board table Shower work area washing system P.S. The machine has always worked in full oil Teflon material Dedpfx Aouw Sq Uofnskg

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Technical data - Travel X- / Y- / Z-axis mm 1,050 / 560 / 460 - Max. Workpiece dimensions mm 1,300 x 560 x 460 - Table dimensions and load mm/kg 1,300 x 560 / 900 Tool spindle - Max. Power kW 22 - Speed range min-1 50 - 15,000 - Max. Torque Nm 199 - Tool system BT40 - Number of tool magazine positions 32 Machine equipment Dkedpjrif H Tsfx Afneg - Preparation for in-process measuring - Hinged belt chip conveyor - 15bar KSS high pressure through the tool spindle Control system - Okuma OSP-P300MA

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Z-way 500 mm Main spindle: Speed 16,000 rpm Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Swing round table: Round table diameter 800 mm Swivel range A: -15 / + 97° Dodpfx Afeinh Rqonskg rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Total power requirement 31 kVA Machine weight 15 tons Space requirements approx. 6.0 x 5.0 x 3.6 m other equipment - Documentation - Chip conveyors - electronic heat compensation Y- + Z-axis

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Turning length: 3,000 mm Swing diameter over cross slide: 520 mm X-axis travel: 600 mm Y-axis travel: 150 mm Z-axis travel: 3,150 mm Swing diameter: 520 mm Turning length: 3,000 mm Control: SIN 840 D Siemens Z-axis: 3,150 mm Z-axis feed rate: 1 – 40,000 mm/min Rapid traverse Z-axis: 40.00 m/min X-axis: 600 mm X-axis feed rate: 1 – 30,000 mm/min Rapid traverse X-axis: 30.00 m/min Main spindle S1 Spindle speed range: 1 – 3,300 rpm Drive power at 100% load: 29.00 kW Spindle nose DIN 55026 – size A11 Spindle diameter at front bearing: 160 mm Spindle bore: 115 mm C-axis: 360 x 0.001° Dodpfxsxpfd Do Afnskg Milling spindle S2 Tool holder: Capto C6 Infinitely variable speed range: 1 – 6,000 rpm Y-axis: -100 / +150 mm B-axis: -110 / +110° Tool magazine with 100 stations Total power requirement: 145 kW Machine weight approx.: 24 t