Bench Drilling Machine

MAXION BT 25 ST

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm Lrsdpfx Aouhhzhodksw bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m

Condition: new, High performance threading machine with lead screw and optimal safety device against tool breakage. Program for single or continuous cycle. Electronically controlled motor braking for single cycle. Easy lead screw change by quick coupling. Technical data UNIMAX 3T GL: Threading capacity: M 4 - M20 Thread per hour: 800 Ledpfx Adsgv I Unokjrw Normal drilling capacity: 28 mm spindle: MK 3 thread depth: 90 mm drilling depth: 120 mm throat: 260 mm spindle / table: 220 - 600 mm table surface: 420 x 390 mm T-slot width: 14 mm column diameter: 110 mm total height: 1.300 mm weight: 250 kg special motor: 0,9 kW Mains connection: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packing: C - 160x75x125 cm Other accessories / options: Lead screw, tap holder, outfeed switch, forced-ventilated motor, die holder, flange quill, foot pulse button, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.

Condition: new, High performance threading machine with lead screw device. Safety device against tool breakage. Programs for single and continuous cycle, programmable thread depth, piece counter, LED light and electronically controlled motor brake for the single cycle. Easy change of lead screw by quick coupling. Normal drilling capacity 15 mm Thread cutting capacity M 3 - M 10 Threads per hour 1.000 Spindle MK 2 Thread depth 60 mm Drilling depth 100 mm Throat 250 mm distance spindle/table 185 to 541 mm Table surface 340 x 445 mm T-slot width 12 mm Column diameter 90 mm Lrjdpofrlndsfx Adksw Total height 1,050 mm Weight 120 kg Special motor 0,55 kW Power supply 400 V/50 Hz BT 18 GL M00033 4 spindle speeds 320 min-1 560 min-1 1,000 min-1 1,600 min-1 Also available as pillar drilling machine BS 18 GL (M00034)! Digital display for speed as standard. 200 mm longer column 14154

Condition: used, Year of construction: 2015, machine/vehicle number: 188786, Tapping machine Make: MAXION Model: BT 15 GL Year of manufacture: 2015 - workshop tested Machine no.: 188786 4 speeds 320, 560, 1,000 and 1,600 rpm. Accessories: - Lead screw device for jig-like threads - Lead screw change by means of quick coupling - Safety device against tool breakage - Program for single or continuous cycle - electronically controlled motor braking for single cycle - Electrical hood guard - electric chuck protection hood - 3m connection cable with 16A CEE plug Lredpfx Asvc A U Dsdkjw - operating instructions incl. the following options: - Pull-out circuit After the safety device is activated device is activated, this enables the quill to be return the quill to the home position at the the push of a button. Without this device, the spindle must be the spindle must be turned back manually until the the home position.

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 30 mm throat 260 mm bore stroke 125 mm continious capacity 25 mm threading bis M20 spindle taper MK 3 turning speed range - stepless 125 - 4000 U/min transmission ratio 2 feed manuell bore depth 125 mm column diameter 110 mm Ljdpfxowngqls Adksrw table surface area 420 x340 mm incl. new, heavy-duty machine jaw vice (jaw width 100 mm)

Condition: like new (used), Year of construction: 2017, Vertical Arburg Schiebetisch 375 V 500-100 (2017, working hours: 19.719) Clamping unit: 50 ton Oppening stroke (max. kN/mm) : 30 / 250 Mould height (fixed/variable) min.-max. mm: ---/172/272 Platen daylight (fixed/variable) max. mm: ---/422-522 Shuttle table stroke: 650 mm Ljdsu Ep Imjpfx Adksrw Screw diameter: 20 mm Injection volume: 31 cm3 Shot weight: 29 g Injection pressure: 2.500 bar Working hours: 19.719 Equipment: 3x hot runner 1x hydraulic core puller 1x pneumatic core puller

Condition: new, bore capacity in steel (diameter) 32 mm throat 320 mm bore stroke 155 mm spindle taper MT 4 MK table: 500 x 420 mm column diameter 120 mm turning speeds 125 - 3030 U/min feeds 0,1 - 0,2 - 0,3 mm/U total power requirement 1,2 kW weight of the machine ca. 540 kg. range L-W-H 0,8 x 0,55 x 2,2 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° Lredsurznqopfx Adkew • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment

Condition: good (used), Year of construction: 2001, machine/vehicle number: 152279, Offer 25253 Technical specifications: - Tapping capacity up to M 20 - Drilling capacity in steel 30 mm - Drill spindle taper MK 3 - Drilling depth 120 mm - 10 spindle speeds 120 - 2160 rpm - Drive 400 V / 0.7 / 1.3 kW - Table size 390 x 420 mm - Distance spindle/table approx. 220 - 600 mm Ledexc Uz Ejpfx Adkorw - Spindle arm reach/column 260 mm - Table stand - Required space approx. W 550 x H 1900 x D 800 mm - Weight approx. 300 kg

Condition: excellent (used), Stock number: 2919 Lsdeu Ic Tzjpfx Adkorw Manufacturer: Wörner Machine number: 30187 Type / Model: B13S Drilling capacity: up to 10 mm Spindle holder: MK2 B16x2 Speed range: 540 to 2,500 rpm infinitely variable Stroke: 120 mm Projection: 250 mm Table support surface: 330 x 430 mm Head adjustment: 400 mm Machine footprint: 430 x 650 mm Distance table spindle nose min/max: 80 / 480 mm Total connection: kW Accessories/equipment: drill chuck Condition: very good Weight: 165 kg Dimensions with table: 750 x 620 x 1,600 / 2,000 mm