Cutting saw CANALI HBSG1100

Condition: used, functionality: fully functional, Equipment: cabin, For Sale: Complete Log Sawing Line Complete log sawing line in excellent condition, ideal for professionals in the wood industry. This robust and high-performance equipment will allow you to optimize your production. Technical details: 23.5 m bark conveyor Storage capacity for 30 logs over a 16 m length 5 stops 4 log turners 5 flippers Double-guided log clamp with independent HYDRAULIC output Straightening function for better log alignment Powerful and precise winch for optimal control 30 m ejection rollers with 4 Left/Right ejections Complete operator cabin, excellent condition Lajdsxdc H Eepfx Affjk Other features: 140 frame LBL slabber Loader Pre-crosscut saw Hydraulic carriage with 5 stops, Gillet brand Complete mechanization for increased performance For more information, photos, or to arrange a visit, please contact us!

Condition: good (used), functionality: fully functional, SMELT professional Coating line LED/ All machines are used and still working well. Laodpfepyg Itox Affjk

Condition: used, mileage: 31,325 km, power: 115 kW (156.36 HP), first registration: 07/1992, overall weight: 10,500 kg, fuel type: diesel, color: orange, tire size: 12,5 r20 mpt, gearing type: mechanical, machine/vehicle number: 3765, Equipment: all wheel drive, crane, differential lock, hydraulics, 1 branded UNIMOG 1650 with Hiab 120 loading crane Internal number: 3765 First registration: 04/92 Completed. Operating hours: approx. 219.8 Completed. KM status: approx. 31,325 Power: 115 kW/ 156 PS Gross vehicle weight: 10,500 kg Power take-off below Hydraulics 2-celled Electric 24 V Tires 12.5 R20 MPT Loading crane Hiab 120 4 x hydraulically extendable, radio remote control Load values: 2.0 m - 4,400 kg 10.1 m - 850 kg Lasdpfsfh Nbcsx Affsk 4.6 m - 2,130 kg 11.9 m - 700 kg 8.2 m - 1,080 kg The very low crane frame ensures that the UNIMOG is very stable and therefore has very high load values on the crane. The offer is subject to change, errors and prior sale reserved!

Condition: ready for operation (used), For turning plates, slices or trays up to 250 mm Ø Laederh Hntopfx Affok Machine with vacuum clamping

Condition: excellent (used), CATALOGUE NUMBER 6114 TECHNICAL DATA - Feed hopper inlet: 800x1000 mm - Rotor working width: 800 mm - Pump motor: 0.75 kW - Main motor: 15 kW - Number of knives: 21 pcs - Knife size: 30x30 mm - Screen: 0.8x10 mm - Pressure drawer - Electric auto-reverse - Discharge augers: 2×1.1 kW - Dimensions (L/W/H): 2460x1800x2250 mm - Weight: 1660 kg – German-made – Auto-reverse – Pressure drawer – Not painted – In very good condition – Used shredder Net price: 63,900 PLN Net price: 15,200 EUR depending on the exchange rate, 4.2 EUR Laedpfsgnzd Ejx Affek (Prices may vary with significant exchange rate fluctuations)

Year of construction: 1963, condition: ready for operation (used), Load: 18t, lifting height: 10,750mm, span: 23,000mm, weight: 35.1t, machine was regularly maintained and inspected. Laodeh I Edvspfx Affek

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers Ljdpfxsvuhumj Affsak The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Year of construction: 2025, condition: new, With the separation of milled lumber, laid loose or as a package, already milled lumber can be processed economically. In a two-stage process, the lumber is separated for further processing. It is also possible to insert the separated lumber in a controlled manner in a running process. Lasdsg Rxhgopfx Affok The feeder is mechanically designed in such a way that even crooked logs can be fed in safely. In addition, it can be adjusted to the diameter of the wood so that only one piece is transported further, thus avoiding stoppages in the further process.

Condition: used, Year of construction: 1999, operating hours: 3,400 h, machine/vehicle number: 261724855, TRACTOTECHNIK GRUNODRILL 10S year: 1999 Working hours: Reading - hole diameter: max. 385 mm - maximum torque: 2500 kN - tractive force 96 kN - compressive force 65 kN Ledpehd I S Uefx Affjak - max. drilling length 250 m - power: 90 kW - drill rods and bits included - complete equipment with separate engine, hydraulic power pack and tank for drilling fluid - engine Perkins 119 kW / 162 PS This offer is subject to change, input errors and mistakes excepted. Only the concrete agreements in the order confirmation or in the sales contract are valid. The basis for this contract are exclusively our General Terms and Conditions (GTC). These are available on our homepage at any time or can be requested from us. Place of jurisdiction is Eberswalde, Germany. If you have any questions, please do not hesitate to contact me More Information Intended use: Construction,

Year of construction: 1984, condition: excellent (used), Blade diameter: 550 mm Ledpfx Afslrtntsfsak Minimum cutting length: 500mm Minimum cutting width: 100mm Maximum cutting height: 160 mm Minimum cutting height: 40mm Pneumatic clamps