Unimog

Mercedes-Benz UNIMOG 1650 mit Kran Hiab 120

Condition: ready for operation (used), Year of construction: 1974, machine/vehicle number: 74-4-10, functionality: fully functional, ALTENDORF F90 sliding table saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer Altendorf Germany Bcjdpeipvrbsfx Ahvsw Saw length mm: 2600 cutting width mm: 1.300mm Cutting height max mm: 130 Saw blade diameter max. 400 mm Main motor 5.5 KW with scorer 4 speed levels Saw blade height adjustment: manual Weight approx. kg: 780 Technical data subject to change

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Bedpjn N Ekcjfx Ahvjcw Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: good (used), max. working width: 2000 mm for metal sheets up to: 1 mm opening width top clamping bar: 70 mm adjustment bending cheek: 10 mm Bsdpfx As Ixynjhvocw space needed: 2300 x 600 x 1050 mm

Condition: used, Year of construction: 1980, machine/vehicle number: xxxx, Lg.no. 24211 Bcedjt H I Aqopfx Ahvow Technical data approx: - max. working width 1020 mm - max. material thickness at 40 kg/mm² strength 1.5 mm - man. back gauge adjustable up to 550 mm - front angle stop - sheet hold-down device - Table size 1100 x 650 mm - Working height 900 mm - Space requirement approx. W 1800 x H 1450 x D 850 mm - Weight approx. 400 kg - mobile

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Bodju Rptyjpfx Ahvecw Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Year of construction: 2008, condition: ready for operation (used), Single hopper vibropress with full circulation, 2008. The line includes : - Rotho dryer for 2,970 places, - pallets (bretts) 1400x1100, - Sicoma MP2250 / 1500 mixer, - charge for 4 materials for production, - silos 120 and 60 tons, - over a dozen forms, mainly produced by Rampf Formen The line has been operating since 2009, only 5 days a week. It is used for the production of ceiling blocks and concrete blocks. The line layout was built under the existing hall so it does not take up much space. Bodpjiwa H Dofx Ahvscw

Condition: used, mileage: 11,111 km, power: 100 kW (135.96 HP), first registration: 06/1987, fuel type: diesel, overall weight: 7,490 kg, color: green, Equipment: all wheel drive, Used Vehicle * Vehicle No.: * Turbo engine OM 366, 100 kW * High-speed axles * Flatbed 3.15 m x 2.3 m * Good condition Bcedpfx Ajlxlqxehvew ---- -> Please note that viewings are only possible by prior appointment. Thank you for your understanding. -> Sale exclusively to businesses or for export. The above data, photos, and equipment list are provided solely for general identification of the vehicle and do not constitute a guaranteed specification in the legal sense of a purchase contract! All information and accessory details are provided WITHOUT WARRANTY. Subject to change, prior sale, and errors! The equipment list does not form part of the contract and must be checked in detail by each interested party on site before purchase. Subsequent complaints will not be accepted.

Condition: new, Bernardo manual metal circular saw CS 315 H Technical specifications Saw blade diameter of 315 x 40 mm Speed 19 / 38 U/min Vice opened Max 150 mm Working height 920 mm S1 motor power output 100% 0,75 / 1,5 kW Motor power S6 40% 1.0 / 2,1 kW Voltage 400 V Machine dimensions (W x D x H) 530 x 1000 x 1740 mm Weight 235 kg Bcjdpfx Ahjd Id Ugjvow Round solid material 90°: 80 mm 45°: 70 mm Round tube 90°: 80 mm 45°: 70 mm Square shaped tube 90°: 80 x 80 mm 45: 70 x 70 mm Solid material square 90°: 80 x 80 mm 45: 70 x 70 mm Square tube rectangular 90°: 90 x 80 mm 45: 80 x 70 mm Rectangular solid material 90°: 90 x 80 mm 45: 80 x 70 mm Properties Gear head for slot working left and right 90 ° swiveling Removable coolant tank in the robust base integriergt Gearbox with hardened and ground Auger and bronze worm wheel Security guard opens automatically when the cutting Precise, 4 guided, self-centering double clamping vise Ergonomically shaped handle with push button for fatigue-free cutting Low speed of the saw blade (19 / 38 RPM) optimal for cutting of full materials Reduction gear low noise running in an oil bath Scope of delivery Coolant system with filter Self centering Vice Base

Condition: ready for operation (used), Year of construction: 1997, sheet width 3230 mm plate thickness 2.5 mm thickness at "Niro-steel" 1.5 mm no. of strokes 28 - 42 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control ELGO 87P engine output 6.8 kW weight of the machine ca. 3410 kg. range L-W-H 4070 x 2070 x 1400 mm from a maintenance workshop including special accessories (!!) Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - NC electro-motorized back stop - including NC ELGO "TYP 87P" digital control unit * adjustable from the front right * with target/actual value position input * continuous adjustment over the entire travel range * rough adjustment via push buttons * protection of the limit values ??with limit switch - "Duo-Cut" drive with two dynamic, powerful gear motors - support table with recessed grips - hold-down bar with hard rubber strip - all-steel knife with two cutting edges - selector switch for single and continuous stroke - 1x freely movable foot switch Bcsdoxacd Nepfx Ahvjw - safety device at the rear - original operating instructions Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts - 1x extra long side stop, including support foot + digital stop - 2x extra long, front support arms * with "SLIDING" mount - for easy moving

Year of construction: 1992, condition: good (used), machine/vehicle number: 03.323.36002, Lg.No. 22621 Technical data: - max. working length 3500 mm - column passage 3050 mm Bcjdpfxsip Niko Ahvjw - max pressing force 2000 kN - max distance table / ram 480 mm - column throat 260 mm - ram stroke approx. 300 mm - Stroke speeds - downward speed idle max. 100 mm/sec - Upward speed 80 mm/sec - Downward press speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - weight approx. 16000 kg - with: - CNC - control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. tool clamping - upper tool + universal die tool - material supports - two-hand control panel