Hydraulic press

Müller HEP 10

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Technical data: Type: HKPS8000
 Year of manufacture: 1975
 effective stroke: 200mm Lrjdpfx Aeg Ufvbepvol throat: 250mm (at center) table size: 320x320mm Installation height: approx. 345mm Voltage: 380V 
Perm. load: 80000N
 Drive type: HYDR Drive power: 1,5kW Oil quantity: 60l Oil viscosity: 3°E

Condition: good (used), Year of construction: 1983, machine/vehicle number: 5763, Offer 24590 Technical data: - Drilling capacity 22 mm - Drill spindle mount MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 – 710 – 1400 - 2800 rpm - Throat depth 210 mm Lrsdpsvxg Ruefx Apvsl - Machine table 480 x 420 mm - Min. / max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: used, Year of construction: 1990, ja vice 1 quill stroke ja 2.000 mm weight of the machine ca. 790 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Lrjdpefym Husfx Apvsl Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 1989, for twist drills: 3 - 50 mm Ø Point angle: 90 - 140° Adjustable relief angle Grinding motor: 2800 rpm, 0.25 kW Lsdex Ea Nmepfx Apvorl Gear motor for swing motion: 0.12 kW Grinding wheel dimensions: 175 x 32 x 20 / 90 x 20 mm Space required: 800 x 550 x 1140 mm Weight: 120 kg

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t max. load prism jaw 7.5t piston stroke 160mm piston travel 550mm Dimensions and weights length (product) approx. 1240mm width/depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear width 790mm Installation height max. 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot lever Winch for lifting and lowering the table Location: Ex works Lodpfji Amnpox Apvorl - available at short notice -

Condition: new, Year of construction: 2022, pressing force: 15 t, Single column press with 15 T capacity suitable for continuous shift operation a) travel speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by rotary control ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Ljdpfsitylgox Apvorl Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 150 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Max. Opening width 400 mm Stroke and min. opening 350 mm Table height above floor 850 mm Height above floor (headroom) approx. 1900 mm Hall height min. 2.500 mm Parallel deviation at 20°C +/- 0.1 mm Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of the press without operating materials approx. 1.1 to Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 290 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 9 L/min Oil volume approx. HLP 46 MW 80 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system 400 V AC Main supply Control voltage 24 V DC Hydraulic pumps 24 V DC Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW Equipment control cabinet Protection class IP 54 Reserve space Approx. 20 Cooling no Interior lighting no Operating mode switch Lockable yes

Condition: used, machine/vehicle number: 102 039 1024 07265, cutting area at 90° round: 245 mm Lsdpecd Tmyjfx Apvorl cutting area at 90° flat: 220 x 240 mm cutting area in mitre at 45°: 150 mm saw blade measures: 400 x 31 x 2 mm stroke speeds: 55 - 155 /min electrical connection: 380 V, 1,1 kW space needed: 1200 x 650 x 1250 mm weight: 340 kg

Condition: used, Hydr. hacksaw (Made in Croatia) Type BS 320 Year of manufacture approx. 1980 Sawing area round Ø 320 mm sawing area square 280 x 280 mm Saw blade 550 x 45 x 2,25 mm Material infeed height 680 mm Sawing speed 42 - 55 - 85 - 110 strokes/min. motor power 1,8 and 2,4 kW pole changeable Mains connection 400 Volt, Hz - Miter adjustment up to 45 - Saw motor with 2 speeds and 2 V-belt steps - Hydraulic saw bow lowering - hydraulic cutting pressure adjustment via throttle valve - Coolant device in machine base Lrodolqadhjpfx Apvsl Space requirement hacksaw L x W x H 1900 x 1350 x 1500 mm width without fence 800 mm weight approx. 750 kg good condition

Condition: used, Year of construction: 1988, cutting diameter 210 mm band length 400 mm capacity 90 degrees: square 190 mm capacity 90 degrees: flat 240 x 190 mm Ledpsxz Hhhsfx Apvjrl cutting speed 16/32 m/min total power requirement 1,1 kW weight of the machine ca. 180 Kg dimensions 1,2 x 0,8 x 80,8 m Hydraulic hacksaw with: - Coolant device - good condition

Condition: used, Year of construction: 1990, cutting diameter 280 mm band length 450 mm capacity 90 degrees: square 240 x 240 mm capacity 90 degrees: flat 280 x 160 mm capacity 45 degrees: round 180 mm dimensions of saw-blade 450 x 40 x 2.0 mm engine output 2.6 kW height of material-table 500 mm weight of the machine ca. 495 kg Ledpexab Hcefx Apverl range L-W-H 1500 x 600 x 1340 mm Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice - coolant device